Phenotypic characteristics and immune response of Procypris merus following challenge with aquatic isolate of Klebsiella pneumoniae.

Currently, aquaculture is a relatively mature industry; however, disease problems are continuously threatening the industry and hindering its development to a certain extent. Klebsiella pneumoniae is one of the zoonotic bacteria widely present in different hosts and has caused some degree of harm to the aquaculture industry, posing a potential threat to the water environment and indirectly also affecting human food safety issues. In this study, K. pneumoniae was isolated from the aquaculture environment, named as ELD, and subjected to pathogenic and immunological related studies. The results of the study showed that the strain carries at least four virulence-related genes, magA, wabG, ureA and uge, and has developed resistance to at least seven antibacterial drugs, such as amoxicillin, doxycycline, rifampicin, and so on. Moreover, the strain is highly pathogenic and is capable of causing systemic clinical foci in Procypris merus. In addition, after infection with K. pneumoniae, the expression of IL-1ß, IL-8, HSP70 and C2 was upregulated in P. merus as a whole, whereas the expression of TNF-α did not change significantly in any of the tissues, which might be a kind of immune response of P. merus against K. pneumoniae infection. This study provides an important theoretical basis for the in-depth exploration of the pathogenic mechanism of K. pneumoniae in fish and the immune response that occurs after the disease is contracted in fish, as well as theoretical support for the development of effective preventive and therapeutic strategies against K. pneumoniae-infected aquatic animals in the future.

Molecular and functional characterization of viperin in golden pompano, Trachinotus ovatus.

The radical S-adenosyl methionine domain-containing protein 2 (RSAD2), also known as viperin, plays a momentous and multifaceted role in antiviral immunity. However, the function of viperin is uninvestigated in golden pompano, Trachinotus ovatus. In the present study, a viperin homolog, named To-viperin, was cloned and characterized from golden pompano, and its role in response to grouper iridovirus (SGIV) and nervous necrosis virus (NNV) infection was investigated. The whole open reading frame (ORF) of To-viperin was composed of 1050 bp and encoded a polypeptide of 349 amino acids with 70.66%-83.51% identity with the known viperin homologs from other fish species. A variable N-terminal domain, a highly conserved C-terminal domain, and a conserved middle radical SAM domain (aa 61-271) with the three-cysteine motif CxxCxxC was found in To-viperin sequence. Expression analysis showed that To-viperin was constitutively expressed in all tested organs and was located mainly in the ER of golden pompano cells. Treatments with SGIV, poly I: C, or NNV could induce the up-regulation of viperin to varying degrees. The ectopic expression of To-viperin in vitro significantly reduced the viral titer of SGIV and NNV. Furthermore, To-viperin overexpression enhanced the expression of IFNc, IRF3, and ISG15 genes as well as, to a lesser extent, the IL-6 gene. In summary, our results suggested that the function of viperin is likely to be conserved in fish specise, as observed in other vertebrates, shedding light on the evolutionary conservation of viperin.

Research progress and application of ultrasonic- and microwave-assisted food processing technology.

Microwaves are electromagnetic waves of specific frequencies (300 MHz-3000 GHz), whereas ultrasonic is mechanical waves of specific frequencies. Microwave and ultrasonic technology as a new processing method has been widely used in food processing fields. Combined ultrasonic and microwave technology is exploited by researchers as an improvement technique and has been successfully applied in food processing such as thawing, drying, frying, extraction, and sterilization. This paper overviews the principle and characteristics of ultrasonic- and microwave-assisted food processing techniques, particularly their combinations, design of equipment, and their applications in the processing of agricultural products such as thawing, drying, frying, extraction, and sterilization. The combination of ultrasonic and microwave is applied in food processing, where microwave enhances the heating rate, and ultrasonic improves the efficiency of heat and mass transfer. The synergy of the heating effect of microwave and the cavitation effect of ultrasonic improves processing efficiency and damages the cell structure of the material. The degradation of nutrient composition and energy consumption due to the short processing time of combined ultrasonic and microwave technology is decreased. Ultrasonic technology, as an auxiliary means of efficient microwave heating, is pollution-free, highly efficient, and has a wide range of applications in food processing.

Changes in Chemical Composition of Flaxseed Oil during Thermal-Induced Oxidation and Resultant Effect on DSC Thermal Properties.

To investigate the changes in chemical composition of flaxseed oil during thermal-induced oxidation and the resultant effect on thermal properties, samples with different oxidation levels were obtained by being heated at 180 °C for two hours and four hours. The oxidation degree was evaluated using peroxide value (PV), extinction coefficient at 232 nm and 268 nm (K232 and K268), and total polar compounds (TPC). Using chromatography, the fatty acid profile and triacylglycerol (TAG) profile were examined. Differential scanning calorimetry (DSC) was used to determine the crystallization and melting profiles. Thermal-induced oxidation of flaxseed oil led to a significant increase (p < 0.05) in PV, K232, K268, and TPC, but the relative content of linolenic acid (Ln) and LnLnLn reduced dramatically (p < 0.05). TPC derived from lipid degradation affected both crystallization and melting profiles. Statistical correlations showed that the onset temperature (Ton) of the crystallization curve was highly correlated with K232, TPC, and the relative content of LnLnLn (p < 0.05), whereas the offset temperature (Toff) of the melting curve was highly correlated with the relative content of most fatty acids (p < 0.05). This finding provides a new way of rapid evaluation of oxidation level and changes of chemical composition for flaxseed oils using DSC.

Influence of ultrasonic pretreatments on microwave hot-air flow rolling drying mechanism, thermal characteristics and rehydration dynamics of Pleurotus eryngii.

BACKGROUND: In order to improve the drying efficiency and reduce the drying energy consumption of Pleurotus eryngii, microwave hot-air flow rolling drying (MHARD) coupled with ultrasonic pretreating time (0, 20, 40, and 60 min) was used to investigate the drying profile, thermal characteristics, water migration, microstructure and rehydration dynamics of P. eryngii using differential scanning calorimetry (DSC), low-field nuclear magnetic resonance (LF-NMR) analysis and scanning electron microscopy (SEM). RESULTS: Results showed that the drying time of P. eryngii was 80, 70, 60 and 50 min, accordingly. Energy consumption was significantly reduced by ultrasonic pretreatment, and moisture effective diffusivity (Deff ) was increased with the increase of ultrasonic pretreating time. DSC curves showed that the drying process was accelerated by ultrasonic pretreatment significantly by enhancing the heat transfer. Meanwhile, SEM images showed that the cell was broken and numbers of irregular holes appeared in the ultrasound-pretreated samples. In terms of rehydration dynamics, Page model could well model the rehydration kinetics of dried P. eryngii with R2 > 0.99. CONCLUSION: The findings indicate that ultrasonic pretreatment is a promising method for MHARD of P. eryngii as it can enhance the drying process, and show potential for industrial application. © 2021 Society of Chemical Industry.

Sodium carboxymethyl cellulose hydrogels containing montmorillonite-NaClO2 for postharvest preservation of Chinese bayberries.

Owing to their lack of outer skin, Chinese bayberries are highly susceptible to mechanical damage during picking, which accelerates bacterial invasion and rotting, shortening their shelf life. In this study, montmorillonite (MMT) was used to absorb an aqueous sodium chlorite solution embedded in a carboxymethyl cellulose sodium hydrogel after freeze drying, and the hydrogel was crosslinked by Al3+ ions. Al3+ hydrolyzed to produce H+, creating an acidic environment within the hydrogel and reacting with NaClO2 to slowly release ClO2. We prepared a ClO2 slow-release hydrogel gasket with 0.5 wt% MMT-NaClO2 and investigated its storage effect on postharvest Chinese bayberries. Its inhibition rates against Escherichia coli and Listeria monocytogenes were 98.84% and 98.96%, respectively. The results showed that the gasket preserved the appearance and nutritional properties of the berries. The antibacterial hydrogel reduced hardness loss by 26.57% and ascorbic acid loss by 46.36%. This new storage method could also be applicable to other fruits and vegetables.

Effect of different drying techniques on drying kinetics, nutritional components, antioxidant capacity, physical properties and microstructure of edamame.

The present study aimed to investigate the effect of hot air drying (HD), microwave rolling-bed drying (MRD), hot air microwave rolling-bed drying (HMRD), pulse-spouted microwave vacuum drying (PSMVD) and freeze-drying (FD) on the drying characteristics, quality properties and microstructure of edamame. Six models were fitted the drying curves, and quality attributes were analyzed. Results indicated that Page model was the most suited model for edamame drying. Compared with HD, MRD and HMRD improved the quality of edamame and decreased the drying time by 45.59% and 36.03% respectively. The FD and PSMVD possessed higher rehydration ability, nutrient retention and antioxidant capacity compared with other methods. Moreover, PSMVD products showed a crunchy texture, the less color change and the shortest drying time (70 min). Microscopy images demonstrated a distinct porous structure in PSMVD, which facilitated the moisture transfer. Overall, PSMVD is a promising dehydration method for obtaining high value-added edamame products.

Value-added application of Platycodon grandiflorus (Jacq.) A.DC. roots (PGR) by ultrasound-assisted extraction (UAE) process to improve physicochemical quality, structural characteristics and functional properties.

Platycodon grandiflorus (Jacq.) A.DC. roots (PGR), a Chinese herb with medicinal and edible value, was powdered by freeze drying (FD) and spray drying (SD) after maceration extraction (ME) or ultrasound-assisted extraction (UAE) to develop a new functional food product. Four PGR powders were obtained namely ME-FD, ME-SD, UAE-FD, and UAE-SD and their powder quality, structural properties, and functionalities were evaluated. UAE-FD powder had the highest powder recovery (85.3 ± 5.79%) and also presented better hydration properties due to the larger particle size compared with other three PGR powders. Four PGR powders exhibited similar thermal decomposition process, molecular structure, amorphous characteristics, amino acids composition, and taste profiles. Furthermore, the UAE-FD PGR powders presented the highest Platycodin D (3.68 ± 0.04 mg/g), total phenolic (2.84 ± 0.11 mg GAE/g), and total flavonoids content (2.11 ± 0.14 mg RE/g), resulting in best antioxidant activity (58.67 ± 2.42 µmol Trolox/g). Therefore UAE-FD is an environment-friendly technique for the production of functional PGR powder with improved nutritional and redispersion properties.

Impacts of guar and xanthan gums on pasting and gel properties of high-amylose corn starches.

The effects of adding guar and xanthan gums on the pasting and gel properties of high-amylose corn starches, Hylon V (~50% amylose content) and NF-CG170 (~71% amylose content), were studied with waxy corn starch as a control, using an ultra-high temperature heating process (up to 130 °C) to gelatinize starches. Interaction between dispersed amylose and hydrocolloids contributed to the earlier onset of viscosity increase during pasting process (lower pasting temperatures) and strong synergistic effects in the peak, setback, and final viscosities with high-amylose starches, phenomena that were more pronounced when amylose content was higher. Conversely, addition of guar and xanthan gums to waxy corn starch resulted in higher pasting temperatures. After held at 5 °C for 2 h, the gelatinized high-amylose starch/hydrocolloid formed stronger and more elastic gels (higher G' and tanδ) with denser microstructure and thicker gel skeleton, compared to starch alone. Compared to xanthan gum, guar gum displayed a much stronger synergistic effect with Hylon V in gel strength, while their difference in synergistic effect was less pronounced with NF-CG170, indicating that amylose dominated gel properties when at a high content (i.e., ~ 71% in starch).

Production of protein-loaded starch microspheres using water-in-water emulsion method.

Protein-loaded starch microspheres were prepared by water-in-water (w/w) emulsion method. The effects of the molecular weight of starch and protein used, concentration of solutes in both dispersed and continuous phases and starch to protein mass ratio on the yield, loading capacity and encapsulation efficiency were measured. These parameters were significantly higher in Bovine serum albumin (BSA)-loaded microspheres than in lysozyme-loaded microspheres. An increase in the molecular weight of starch, solute concentration in dispersed and continuous phases increased the yield. The encapsulation efficiency was significantly improved when the starch to BSA mass ratio was increased. When the starch to BSA mass ratio was 15:1, the encapsulation efficiency reached about 100 % with a loading capacity of 7.3 g/100 g. This method is more effective when both core (protein) and shell (starch) materials with high molecular weight are used. This approach is environmentally friendly and the processing parameters can be easily optimized.

Effect of molecular weight of starch on the properties of cassava starch microspheres prepared in aqueous two-phase system.

Starch microspheres (SMs) were fabricated in an aqueous two-phase system (ATPS). A series of starch samples with different molecular weight were prepared by acid hydrolysis, and the effect of molecular weight of starch on the fabrication of SMs were investigated. Scanning electron microscopy (SEM) showed that the morphologies of SMs varied with starch molecular weight, and spherical SMs with sharp contours were obtained while using starch samples with weight-average molecular weight (M¯w)≤1.057×105g/mol. X-ray diffraction (XRD) results revealed that crystalline structure of SMs were different from that of native cassava starch, and the relative crystallinity of SMs increased with the molecular weight of starch decreasing. Differential scanning calorimetry (DSC) results showed peak gelatinization temperature (Tp) and enthalpy of gelatinization (ΔH) of SMs increased with decreased M¯wof starch. Stability tests indicated that the SMs were stable under acid environment, but not stable under α-amylase hydrolysis.

Crystallization and melting properties of mixtures of milk fat stearin and omega-3 rich oils.

Solid milk fat stearin (S25) can be a promising oxidation retarder due to its capacity to entrap liquid oils, especially for incorporating omega-3 (ω-3) rich oils into dairy products. Thermal properties of S25/ω-3 rich oil mixtures are necessary for such application. The effects of S25 on the crystallization and melting behaviours of ω-3 rich oils, namely fish oil (FO), linseed oil (LO) and krill oil (KO), were investigated by differential scanning calorimetry (DSC). Thermograms showed that with S25 concentration increasing, transitions of FO and LO shifted to lower and largely to higher temperatures, respectively, while crystallization temperature of KO slightly decreased. Negative, positive and low values of interaction enthalpy (ΔHint) suggested the adverse, beneficial and limited effect of S25 on the crystallization of S25/FO, S25/LO and S25/KO mixtures, respectively. LO could have the best oxidative stability upon the addition of S25 since their interactions facilitated earlier and stronger crystallization.

Preparation of starch nanospheres through hydrophobic modification followed by initial water dialysis.

Starch nanospheres smaller than 200 nm were produced from hydrophobically modified starch by using initial water dialysis method. The hydrophobic modification of starch was performed by using octenyl succinic anhydride (OSA). The resultant starch nanospheres were characterized by using Fourier transformation infrared (FTIR) spectroscopy, (1)H nuclear magnetic resonance ((1)H NMR) spectroscopy and fluorescence spectroscopy, scanning electron microscopy (SEM) and dynamic light scattering (DLS). Effects of degree of substitution (DS) in OSA-starch, initial water content and OSA-starch concentration on morphology and particle size of starch nanospheres were evaluated. The SEM micrographs showed that starch nanospheres with spherical shape and sharp edge can be produced at DS values ≧0.67. The particle size of starch nanospheres decreased significantly (P<0.05) with increase in DS of OSA-starch and increase in the initial water content, whereas the particle size increased significantly (P<0.05) with the increase in the concentration of OSA-starch. These OSA-starch nanospheres can be preferentially used to microencapsulate hydrophobic drugs.