Gelatin based preservation technologies on the quality of food: a comprehensive review.

Gelatin has played a great potential in food preservation because of its low price and superior film forming characteristics. This review provides a comprehensive overview of the latest research progress and application of gelatin preservation technologies (film, coating, antifreeze peptide, etc.), discussing their preservation mechanisms and efficiency through the viewpoints of quality and shelf life of animal and aquatic products as well as fruits and vegetables. It showed that bioactive and intelligent gelatin-based films exhibit antibacterial, antioxidant, water resistance and pH responsive properties, making them excellent for food preservation. In addition, pH responsive properties of films also intuitively reflect the freshness of food by color. Similarly, gelatin and its hydrolysate can be widely used in antifreeze peptides to reduce the mass loss of food during freezing and extend the shelf life of frozen food. However, extensive works are still required to extend their commercial application values.

Endovenous Microwave Ablation Versus Radiofrequency Ablation for the Treatment of Lower Limb Varicose Veins.

BACKGROUND: This study aimed to retrospectively compare the clinical outcomes of endovenous microwave versus radiofrequency ablation combined with foam sclerotherapy in patients with lower limb varicose veins. METHODS: We identified patients with lower limb varicose veins treated with endovenous microwave ablation or radiofrequency ablation with foam sclerotherapy between January 2018 and June 2021 at our institution. Patients were followed-up for 12 months. Clinical results, including the pre-post-Aberdeen Varicose Vein Questionnaire and post-Aberdeen Varicose Vein Questionnaire and Venous Clinical Severity Score, were compared. Complications were documented and treated accordingly. RESULTS: We included 287 cases (295 limbs total; endovenous microwave ablation + foam sclerosing agent: n = 142, 146 limbs; radiofrequency ablation + foam sclerosing agent: n = 145, 149 limbs). The operative time was shorter for endovenous microwave ablation than radiofrequency ablation (42.58 ± 15.62 min vs. 65.46 ± 24.38 min, P < 0.05); however, other procedural parameters did not differ. Furthermore, hospitalization costs for endovenous microwave ablation were lower than those for radiofrequency ablation (21,063.74 ± 850.47 yuan vs. 23,312.40 ± 1,035.86 yuan, P < 0.05). At the 12-month follow-up, the great saphenous vein closure rate was similar in both groups (endovenous microwave ablation, 97% [142/146] vs. radiofrequency ablation, 98% [146/149]; P > 0.05). Additionally, the satisfaction or incidence rates of complications were not different among the groups. In both groups, the Aberdeen Varicose Vein Questionnaire and Venous Clinical Severity Score values were significantly lower 12 months postsurgery than before surgery; however, the postoperative values did not differ. CONCLUSIONS: Endovenous microwave ablation effectively treated lower limb varicose veins, with similar short-term effects as radiofrequency ablation. Moreover, it had a shorter operative time and was less expensive than endovenous radiofrequency ablation.

Morphological Changes of the Mandibular Angle After Orthognathic Surgery with Class III Deformity in East Asia.

The aims of this study were to analyze the morphological changes of the mandibular angle after orthognathic surgery for mandibular setback and investigate related factors. This retrospective study included patients from January 2017 to December 2021 diagnosed with skeletal class III deformity who underwent BSSRO (Group I) or bimaxillary surgery (Group II). Preoperative (T0), within 1 month postoperatively (T1), and 6 months postoperatively (T2) CT scans were collected from 61 patients to three-dimensionally analyze the proximal segment displacement, the linear and angular changes of the mandibular angle. The gonion points moved posteriorly and laterally (P < 0.001), while the inferior movement was not significant (P = 1.000, P = 0.274). The intergonial width increased by 3.32 ± 1.87 mm and 2.34 ± 1.77 mm as revealed by T2 CTs, respectively, in Group I and Group II. Mandibular angle decreased in both groups and by 1.41 ± 2.95° in Group I and 1.37 ± 3.41° in Group II. The increase in intergonial width between T1 and T0 was negatively correlated with the preoperative mandibular angle (P = 0.003) and positively correlated with the transverse outward movement of the proximal segment (P < 0.001). After surgery, the intergonial width increased and the inferior and posterior border of the proximal segment flared outward. The changes in intergonial width and mandibular angle were mainly related to the rotation of the proximal segment, which has a certain impact on the aesthetics of the lower face. Therefore, controlling the position of the proximal segment is of vital importance to lessen the changes in the mandibular angle area.Level of Evidence III. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Evaluation of Different Fixation Methods Combinations After L-Shaped Osteotomy Reduction Malarplasty: An In Vitro Biomechanical Study.

BACKGROUND: This in vitro study compared the stability of different fixation method combinations for the zygomatic complex after simulated L-shaped osteotomy reduction malarplasty, a common facial contouring surgery in East Asia with high postoperative complications due to poor fixation methods. MATERIALS AND METHODS: The study used 108 zygoma replicas with various fixation methods combinations in the zygomatic body (L-shaped plate with short wing on zygoma and on the maxilla, two bicortical screws, one bicortical screw with L-shaped plate, square plate, and rectangular plate) and zygomatic arch (Mortise-Tenon structure, 3-hole plate, and Mortise-Tenon structure plus short screw). The failure force under incremental load was applied through the Instron tensile machine to a well-stabilized model using a rubber band simulating the masseter muscle and recorded the increasing force digitally. ANOVA test was used for comparison between recorded values (P < 0.05). RESULTS: The results showed that the most stable combination was a six-hole rectangular plate and a Mortise-Tenon structure plus one short screw (358.55 ± 51.64 N/mm2). The results also indicated that the placement vector of the fixation methods around the L-shaped osteotomy and the use of the two-bridge fixation method were important factors in enhancing the stability of the zygomatic complex. CONCLUSION: The study suggested that surgeons should choose appropriate fixation methods based on these factors to reduce postoperative complications and improve surgical outcomes. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Exposure to smoky coal combustion emissions and leukocyte Alu retroelement copy number.

Household air pollution (HAP) from indoor combustion of solid fuel is a global health burden that has been linked to multiple diseases including lung cancer. In Xuanwei, China, lung cancer rate for non-smoking women is among the highest in the world and largely attributed to high levels of polycyclic aromatic hydrocarbons (PAHs) that are produced from combustion of smoky (bituminous) coal. Alu retroelements, repetitive mobile DNA sequences that can somatically multiply and promote genomic instability have been associated with risk of lung cancer and diesel engine exhaust exposure. We conducted analyses for 160 non-smoking women in an exposure assessment study in Xuanwei, China with a repeat sample from 49 subjects. Quantitative PCR was used to measure Alu repeat copy number relative to albumin gene copy number (Alu/ALB ratio). Associations between clusters derived from predicted levels of 43 HAP constituents, 5-methylchrysene (5-MC), a PAH previously associated with lung cancer in Xuanwei and was selected a priori for analysis, and Alu repeats were analyzed using generalized estimating equations. A cluster of 31 PAHs reflecting current exposure was associated with increased Alu copy number (ß:0.03 per standard deviation change; 95% confidence interval (CI):0.01,0.04; P-value = 2E-04). One compound within this cluster, 5-MC, was also associated with increased Alu copy number (P-value = 0.02). Our findings suggest that exposure to PAHs due to indoor smoky coal combustion may contribute to genomic instability. Additionally, our study provides further support for 5-MC as a prominent carcinogenic component of smoky coal emissions. Further studies are needed to replicate our findings.

Genome-wide analysis of PIN genes in cultivated peanuts (Arachis hypogaea L.): identification, subcellular localization, evolution, and expression patterns.

BACKGROUND: Auxin is an important hormone in plants and the PIN-FORMED (PIN) genes are essential to auxin distribution in growth and developmental processes of plants. Peanut is an influential cash crop, but research into PIN genes in peanuts remains limited. RESULTS: In this study, 16 PIN genes were identified in the genome of cultivated peanut, resolving into four subfamilies. All PIN genes were predicted to be located in the plasma membrane and a subcellular location experiment confirmed this prediction for eight of them. The gene structure, cis-elements in the promoter, and evolutionary relationships were elucidated, facilitating our understanding of peanut PINs and their evolution. In addition, the expression patterns of these PINs in various tissues were analyzed according to a previously published transcriptome dataset and qRT-PCR, which gave us a clear understanding of the temporal and spatial expression of PIN genes in different growth stages and different tissues. The expression trend of homologous genes was similar. AhPIN2A and AhPIN2B exhibited predominant expression in roots. AhPIN1A-1 and AhPIN1B-1 displayed significant upregulation following peg penetration, suggesting a potential close association with peanut pod development. Furthermore, we presented the gene network and gene ontology enrichment of these PINs. Notably, AhABCB19 exhibited a co-expression relationship with AhPIN1A and AhPIN1B-1, with all three genes displaying higher expression levels in peanut pegs and pods. These findings reinforce their potential role in peanut pod development. CONCLUSIONS: This study details a comprehensive analysis of PIN genes in cultivated peanuts and lays the foundation for subsequent studies of peanut gene function and phenotype.

Simultaneously mapping loci related to two plant architecture traits by phenotypic recombination BSA/BSR in peanut (Arachis hypogaea L.).

KEY MESSAGE: We developed a new method phenotypic recombination BSA/BSR (PR-BSA/BSR), which could simultaneously identify the candidate genomic regions associated with two traits in a segregating population. Bulked segregant analysis sequencing (BSA-seq) has been widely used for identifying the genomic regions affecting a certain trait. In this study, we developed a modified BSA/bulked segregant RNA-sequencing (BSR-seq) method, which we named phenotypic recombination BSA/BSR (PR-BSA/BSR), to simultaneously identify candidate genomic regions associated with two traits in a segregating population. Lateral branch angle (LBA) and flower-branch pattern (FBP) are two important traits associated with the peanut plant architecture because they affect the planting density and light use efficiency. We generated an F6 population (with two segregating traits) derived from a cross between the inbred lines Pingdu9616 (erect and sequential; ES-type) and Florunner (spreading and alternating; SA-type). The selection of bulks with extreme phenotypes was a key step in this study. Specifically, 30 individuals with recombinant phenotypes [i.e., spreading and sequential (SS-type) and erect and alternating (EA-type)] were selected to generate two bulks. The transcriptomes of individuals were sequenced and then the loci related to LBA and FBP were simultaneously detected via a ΔSNP-index strategy, which involved the direction of positive and negative peaks in the ∆SNP-index plot. The LBA-related locus was mapped to a 6.82 Mb region (101,743,223-108,564,267 bp) on chromosome 15, whereas the FBP-related locus was mapped to a 2.16 Mb region (117,682,534-119,846,824 bp) on chromosome 12. Furthermore, the marker-based classical QTL mapping method was used to analyze the PF-F6 population, which confirmed our PR-BSA/BSR results. Therefore, the PR-BSA/BSR method produces accurate and reliable data.

Preliminary clinical observation of double C-arm digital subtraction angiography guidance during transjugular intrahepatic portosystemic shunt placement.

BACKGROUND: This study aimed to investigate the safety, preliminary clinical experience, and technical advantages of double C-arm digital subtraction angiography -assisted portal vein puncture for transjugular intrahepatic portosystemic shunt. METHODS: Clinical data of 25 patients with portal hypertension caused by liver cirrhosis were retrospectively analyzed from January 2021 to June 2022. The fluoroscopy time, puncture time, mean portosystemic pressure gradient, dose area product, and intraoperative and postoperative complications were recorded. RESULTS: Transjugular intrahepatic portosystemic shunt was performed in all 25 patients, with a success rate of 100%. The fluoroscopy time, puncture time, and dose area product were 33.6 ± 8.5 min, 9.1 ± 5.7 min, and 126 ± 53 Gy·cm2, respectively. The mean portosystemic pressure gradient decreased from 22.5 ± 6.3 mmHg to 10.5 ± 2.3 mmHg (p < 0.01). No serious intraoperative and postoperative complications were found. CONCLUSION: Double C-arm digital subtraction angiography-assisted portal vein puncture is safe and feasible in transjugular intrahepatic portosystemic shunt operation. It can reduce the difficulty of the operation and possesses evident technical advantages.

Stability of different fixation methods after reduction malarplasty under average and maximum masticatory forces: a finite element analysis.

BACKGROUND: Although titanium plates/screws are effective fixation methods (FM) after L-shaped osteotomy reduction malarplasty (LORM), the ideal FM remains controversial. This first finite element analysis (FEA) aimed to study the effect of various zygomatic body/zygomatic arch FM combinations and their placement vectors on the zygoma complex stability after virtual LORM under the effect of both average (150 N/mm2) and maximum (750 N/mm2) forces and three-dimensional (3D) mapping of stress and strain parameters distribution over the zygomatic bone, fixation methods, and total model. RESULTS: The fixation methods about the short-arm of the L-shaped osteotomy showed lower stress, strain, and displacement values than those across the long-arm osteotomy site. Combined with any zygomatic arch fixation methods (ZAFm), the two bicortical screws group (2LS) on the zygomatic body osteotomy site resulted in smaller displacements and the lowest zygoma bone stress and displacement when combined with Mortice-Tenon structure (MT) as zygomatic arch fixation method. Applied forces caused statistically significant differences in zygomatic bone stress (P < 0.001 and P = 0.001) and displacement (P = 0.001 and P = 0.002). CONCLUSION: All FMs both on the zygomatic body and zygomatic arch provide adequate zygomatic complex stability after LORM. The 2LS group showed better resistance than rectangular plate (RP) and square plate (SP) with lower stress concentrations. The L-shaped plate with short-wing on the maxilla (LPwM) is more stable than having the short-wing on the zygoma bone (LPwZ). Future prospective clinical studies are required to validate the current findings.

Double C-Arm Digital Subtraction Angiography Guidance During Transjugular Intrahepatic Portosystemic Shunt Placement.

BACKGROUND This study aimed to evaluate the safety and efficacy of portal vein puncture with a new guidance system using double C-arm digital subtraction angiography (DSA) during transjugular intrahepatic portosystemic shunt (TIPS) placement. MATERIAL AND METHODS The procedure details of TIPS placements performed on 39 patients in our center between January and December 2021 were retrospectively analyzed. The procedure was performed under double C-arm DSA guidance (study group) and C-arm DSA (control group) in 18 and 21 patients, respectively. We analyzed the procedure's technical success, duration of the overall procedure, portal vein puncture, fluoroscopy, radiation exposure, complications, and mortality and morbidity rates 30 days after the procedure. RESULTS TIPS placement was performed successfully in all patients. The mean portal vein puncture time in the study group (9±5.7 min) was significantly shorter than in the control group (33±14.9 min, p=0.02). The complete mean dose area product of the procedure showed no significant differences (study group, 126±53 Gy/cm²; control group. 142±66 Gy/cm²; p=0.42). The intraprocedural complication rates were 0% and 19% in the study and control groups, respectively (p=0.04). The 30-day post-procedural mortality rate in the control group was 4.8% (1/21), with no deaths from technical complications. CONCLUSIONS Double C-arm DSA guidance is a safe and effective method to assist TIPS placement. This approach may result in shorter portal vein puncture time and lower intraprocedural complication rates.