RESUMO
It is of great importance to study the detachment/attachment behaviors of cells (cancer cell, immune cell, and epithelial cell), as they are closely related with tumor metastasis, immunoreaction, and tissue development at variety scales. To characterize the detachment/attachment during the interaction between cells and substrate, some researchers proposed using cell traction force (CTF) as the indicator. To date, various strategies have been developed to measure the CTF. However, these methods only realize the measurements of cell passive forces on flat cases. To quantify the active CTF on nonflat surfaces, which can better mimic the in vivo case, we employed elastic hydrogel microspheres as a force sensor. The microspheres were fabricated by microfluidic chips with controllable size and mechanical properties to mimic substrate. Cells were cultured on microsphere and the CTF led to the deformation of microsphere. By detecting the morphology information, the CTF exerted by attached cells can be calculated by the in-house numerical code. Using these microspheres, the CTF of various cells (including tumor cell, immunological cell, and epithelium cell) were successfully obtained on nonflat surfaces with different curvature radii. The proposed method provides a versatile platform to measure the CTF with high precision and to understand the detachment/attachment behaviors during physiology processes.
RESUMO
Cells translate mechanical cues from the extracellular matrix (ECM) into signaling that can affect the nucleus. One pathway by which such nuclear mechanotransduction occurs is a signaling axis that begins with integrin-ECM bonds and continues through a cascade of chemical reactions and structural changes that lead to nuclear translocation of YAP/TAZ. This signaling axis is self-reinforcing, with stiff ECM promoting integrin binding and thus facilitating polymerization and tension in the cytoskeletal contractile apparatus, which can compress nuclei, open nuclear pore channels, and enhance nuclear accumulation of YAP/TAZ. We previously developed a computational model of this mechanosensing axis for the linear elastic ECM by assuming that there is a linear relationship between the nucleocytoplasmic ratio of YAP/TAZ and nuclear flattening. Here, we extended our previous model to more general ECM behaviors (e.g., viscosity, viscoelasticity, and viscoplasticity) and included detailed YAP/TAZ translocation dynamics based on nuclear deformation. This model was predictive of diverse mechanosensing responses in a broad range of cells. Results support the hypothesis that diverse mechanosensing phenomena across many cell types arise from a simple, unified set of mechanosensing pathways.
Assuntos
Proteínas Adaptadoras de Transdução de Sinal , Fatores de Transcrição , Fatores de Transcrição/metabolismo , Mecanotransdução Celular , Proteínas de Sinalização YAP , Matriz Extracelular/metabolismo , Integrinas/metabolismoRESUMO
Flow of fluids within biological tissues often meets with resistance that causes a rate- and size-dependent material behavior known as poroelasticity. Characterizing poroelasticity can provide insight into a broad range of physiological functions, and is done qualitatively in the clinic by palpation. Indentation has been widely used for characterizing poroelasticity of soft materials, where quantitative interpretation of indentation requires a model of the underlying physics, and such existing models are well established for cases of small strain and modest force relaxation. We showed here that existing models are inadequate for large relaxation, where the force on the indenter at a prescribed depth at long-time scale drops to below half of the initially peak force (i.e., F(0)/F(∞) > 2). We developed an indentation theory for such cases of large relaxation, based on Biot theory and a generalized Hertz contact model. We demonstrated that our proposed theory is suitable for biological tissues (e.g., spleen, kidney, skin and human cirrhosis liver) with both small and large relaxations. The proposed method would be a powerful tool to characterize poroelastic properties of biological materials for various applications such as pathological study and disease diagnosis.
RESUMO
The displacement of relatively rigid beads within a relatively compliant, elastic matrix can be used to measure the mechanical properties of the matrix. For example, in mechanobiological studies, magnetic or reflective beads can be displaced with a known external force to estimate the matrix modulus. Although such beads are generally rigid compared to the matrix, the material surrounding the beads typically differs from the matrix in one or two ways. The first case, as is common in mechanobiological experimentation, is the situation in which the bead must be coated with materials such as protein ligands that enable adhesion to the matrix. These layers typically differ in stiffness relative to the matrix material. The second case, common for uncoated beads, is the situation in which the beads disrupt the structure of the hydrogel or polymer, leading to a region of enhanced or reduced stiffness in the neighborhood of the bead. To address both cases, we developed the first analytical solution of the problem of translation of a coated, rigid spherical inclusion displaced within an isotropic elastic matrix by a remotely applied force. The solution is applicable to cases of arbitrary coating stiffness and size of the coating. We conclude by discussing applications of the solution to mechanobiology.
RESUMO
The ever-growing overlap between stretchable electronic devices and wearable healthcare applications is igniting the discovery of novel biocompatible and skin-like materials for human-friendly stretchable electronics fabrication. Amongst all potential candidates, hydrogels with excellent biocompatibility and mechanical features close to human tissues are constituting a promising troop for realizing healthcare-oriented electronic functionalities. In this work, based on biocompatible and stretchable hydrogels, a simple paradigm to prototype stretchable electronics with an embedded three-dimensional (3D) helical conductive layout is proposed. Thanks to the 3D helical structure, the hydrogel electronics present satisfactory mechanical and electrical robustness under stretch. In addition, reusability of stretchable electronics is realized with the proposed scenario benefiting from the swelling property of hydrogel. Although losing water would induce structure shrinkage of the hydrogel network and further undermine the function of hydrogel in various applications, the worn-out hydrogel electronics can be reused by simply casting it in water. Through such a rehydration procedure, the dehydrated hydrogel can absorb water from the surrounding and then the hydrogel electronics can achieve resilience in mechanical stretchability and electronic functionality. Also, the ability to reflect pressure and strain changes has revealed the hydrogel electronics to be promising for advanced wearable sensing applications.
Assuntos
Materiais Biocompatíveis/química , Hidrogéis/química , Dispositivos Eletrônicos Vestíveis , Análise de Elementos Finitos , Pressão , Estresse MecânicoRESUMO
Gallium-based liquid metal has captivated exceptionally keen interest in recent years since it remains in the liquid phase at room temperature and thus conforms to the surrounding medium. Meanwhile, such morphing capability can be tuned via altering the oxide layer on the surface of the liquid metal, which further triggers enthusiasm for investigating its locomotion. In this study, we proposed a magnetic actuation scenario for steering liquid metal locomotion in an easily accessible and highly directed manner. The soft mobile composed of liquid metal performed satisfyingly in locomotion and assembly tasks in various circumstances (on a solid surface and in a water environment). Furthermore, promising applications as switches for logic circuits and carriers for cargo transfer, as well as motors for vessel cleaning were also demonstrated, revealing the versatility of such liquid metal mobiles.
RESUMO
Hydrogels have found broad applications in various engineering and biomedical fields, where the shape and size of hydrogels can profoundly influence their functions. Although numerous methods have been developed to tailor 3D hydrogel structures, it is still challenging to fabricate complex 3D hydrogel constructs. Inspired by the capillary origami phenomenon where surface tension of a droplet on an elastic membrane can induce spontaneous folding of the membrane into 3D structures along with droplet evaporation, a facile strategy is established for the fabrication of complex 3D hydrogel constructs with programmable shapes and sizes by crosslinking hydrogels during the folding process. A mathematical model is further proposed to predict the temporal structure evolution of the folded 3D hydrogel constructs. Using this model, precise control is achieved over the 3D shapes (e.g., pyramid, pentahedron, and cube) and sizes (ranging from hundreds of micrometers to millimeters) through tuning membrane shape, dimensionless parameter of the process (elastocapillary number Ce ), and evaporation time. This work would be favorable to multiple areas, such as flexible electronics, tissue regeneration, and drug delivery.
Assuntos
Hidrogel de Polietilenoglicol-Dimetacrilato/química , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Dimetilpolisiloxanos/química , Imageamento Tridimensional , Modelos TeóricosRESUMO
The double-bag theory in modern anatomy suggests that structures with coatings are commonly found in human body at various length scales, such as osteocyte processes covered by pericellular matrix and bones covered by muscle tissue. To understand the mechanical behaviors and physiological responses of such biological structures, we develop an analytical model to quantify surface effects on the deformation of a coated cylindrical compressible liquid inclusion in an elastic matrix subjected to remote loading. Our analytical solution reveals that coating can either amplify or attenuate the volumetric strain of the inclusion, depending on the relative elastic moduli of inclusion, coating, and matrix. For illustration, we utilize this solution to explore amplification/attenuation of volumetric strain in musculoskeletal systems, nerve cells, and vascular tissues. We demonstrate that coating often plays a crucial role in mechanical regulation of the development and repair of human tissues and cells. Our model provides qualitative analysis of cross-scale mechanical response of coated liquid inclusions, helpful for constructing mechanical microenvironment of cells.
Assuntos
Modelos Biológicos , Humanos , Fenômenos Biomecânicos , Estresse Mecânico , Módulo de Elasticidade , Força CompressivaRESUMO
Porous materials with sound absorption and load-bearing capabilities are in demand in engineering fields like aviation and rail transportation. However, achieving both properties simultaneously is challenging due to the trade-off between interconnected pores for sound absorption and mechanical strength. Inspired by quilling art, a novel design using spiral material formed by rolling planar materials into helical structures is proposed. Experimental results show high structural strength through self-locking mechanisms, while double porosities from interlayer spiral slits and aligned submillimeter pores provide excellent sound absorption. These spiral sheets surpass foam aluminum in specific strength (up to 5.1 MPa) and approach aerogels in sound absorption (average coefficient of 0.93 within 0-6400 Hz). With its adaptability to various planar materials, this spiral design allows for hybrid combinations of different materials for multi-functionality, paving the way for designing advanced, lightweight porous materials for broad applications.
RESUMO
With the acceleration of the mining process, the goaf has become one of the main sources of danger in underground mines, seriously threatening the safe production of mines. To make an accurate prediction of the risk level of the goaf quickly, this paper optimizes the features of the goaf by correlation analysis and feature importance and constructs a combination of feature parameters for the risk level prediction of the goaf to solve the problem of redundancy of evaluation indexes. Multiple machine learning algorithms are applied to 121 sets of goaf data respectively, and the optimal algorithm and the best combination of feature parameters are obtained by evaluating the mining area with multiple indicators such as accuracy and kappa coefficient. The best combination of features parameters are ground-water, goaf layout, volume of goaf, goaf volume, span-height ratio, and mining disturbance, and the optimal algorithm is Extra Tree (ET), which needles the goaf risk level prediction problem with the accuracy of 94%. This model can be used to solve the problem of how to quickly and accurately predict the risk level of the goaf.
RESUMO
Hydrogel exhibits attractive mechanical properties that can be regulated to be extremely tough, strong and resilient, adhesive and fatigue-resistant, thus enabling diverse applications ranging from tissue engineering scaffolds, flexible devices, to soft machines. As a liquid-filled porous material composed of polymer networks and water, the hydrogel freezes at subzero temperatures into a new material composed of polymer matrix and ice inclusions: the frozen hydrogel displays dramatically altered mechanical properties, which can significantly affect its safety and reliability in practical applications. In this study, based upon the theory of homogenization, we predicted the effective mechanical properties (e.g., Young's modulus, shear modulus, bulk modulus and Poisson ratio) of a frozen hydrogel with periodically distributed longitudinal ice inclusions. We firstly estimated its longitudinal Young's modulus, longitudinal Poisson ratio and plane strain bulk modulus using the self-consistent method, and then its longitudinal and transverse shear modulus using the generalized self-consistent method; further, the results were employed to calculate its transverse Young's modulus and transverse Poisson ratio. We validated the theoretical predictions against both finite element (FE) simulation and experimental measurement results, with good agreement achieved. We found that the estimated transverse Poisson ratio ranges from 0.3 to 0.53 and, at low volume fraction of ice inclusions, exhibits a value larger than 0.5 that exceeds the Poisson ratios of both the polymer matrix and the ice inclusion (typically 0.33-0.35). Compared with other homogenization methods (e.g., the rule of mixtures, the Halpin-Tsai equations, and the Mori-Tanaka method), the present approach is more accurate in predicting the effective mechanical properties (in particular, the transverse Poisson ratio) of frozen hydrogel. Our study provides theoretical support for the practical applications of frozen liquid-saturated porous materials such as hydrogel.
Assuntos
Hidrogéis , Gelo , Reprodutibilidade dos Testes , Módulo de Elasticidade , PolímerosRESUMO
The number of express boxes worldwide exceeded 170 billion in 2021, and, from several regions in China, tested positive. Therefore, it is important to study the transmission of viruses through express boxes. In this paper, we establish a model of express box virus transmission based on comprehensive consideration of environmental factors, such as temperature, disinfection, humidity, virus release intensity, and volume of vehicle, to study the transmission of express box virus, and explore the spatial and geographic spread variation of express box viruses in China. Several important findings emerged from the study, including: (1) Disinfection can prolong the spread of viruses in the express box for ≥21 h; (2) For every 1 °C rise in temperature, the infected time can be prolonged by ≥1.2 h, and for every 10% rise in relative humidity, the virus transmission time can be prolonged by ≥1.32 h; (3) In an environment suitable for virus transmission, when loaded with 1000, 2000, 4000 express boxes, areas where the express delivery time exceeds 22.56, 18, 14.64 h will face the risk of all the boxes in the carriage being infected. These findings could help public health departments prevent the risk of virus transmission from express boxes.
Assuntos
COVID-19 , Epidemias , Humanos , COVID-19/epidemiologia , COVID-19/prevenção & controle , Temperatura , Umidade , China/epidemiologiaRESUMO
Stress in the three-dimensional extracellular matrix is one of the key cues in regulating multiscale biological processes. Thus far, noticeable progress in methods and techniques (e.g., micropipette aspiration, AFM, and molecule probes) has been made to quantify stress in cell microenvironment at different length scales. Among them, the microsphere sensor-based method (MSS-based method) has emerged as an advantageous approach over conventional techniques in quantifying stress in situ and in vivo at cellular and supra-cellular scales. This method is implemented by seven sequential steps, including fabrication, modification, characterization, cell adhesion, imaging, displacement field extraction and stress calculation. Precise control of each step and inter-tunning between steps can provide quantitative characterization of stress field. However, detailed procedural information associated with each step and process has been scattered. This review aims to provide a comprehensive overview of MSS-based method, systematically summarizing the principles and research progresses. Firstly, the basic principles are introduced, and the specific experiment and calculation processes of MSS-based method are presented in detail. Then, recent advances and applications of this method are summarized. Finally, perspectives of the limitations and development trends of MSS-based method are discussed. This specific and comprehensive review would provide a guideline for the widespread application of MSS-based method as an advantageous method for in situ and in vivo stress characterization at cellular and supra-cellular scale within three-dimensional extracellular matrix. STATEMENT OF SIGNIFICANCE: In this review, a method based on a microsphere sensor (MSS-based method) as an advantageous approach over conventional techniques in quantifying stress in situ and in vivo at cellular and supra-cellular scales is introduced and discussed. This technique is implemented by seven sequential steps, including fabrication, modification, characterization, cell junction, imaging, displacement field extraction, and stress calculation. Precise control of each step and inter-tunning between steps can provide quantitative stress field. However, detailed procedural information associated with each step has been scattered. Thus, a comprehensive review collating recent advances and perspective discussions is a necessity to introduce a better option for quantifying the stress field in biological processes at the cellular and supra-cellular scales.
Assuntos
Diagnóstico por Imagem , Matriz Extracelular , MicroesferasRESUMO
Blockage of ureter caused by kidney stone, accompanied by severe pain/infections, is a high incidence urinary tract disease that has received extensive attention. Currently, in clinics, a kidney stone with diameter less than â¼5 mm is considered capable of passing through ureter. However, this critical size (â¼5 mm) is empirically based, lacking quantitative analysis. In this study, we proposed a stone-ureter interaction model to quantificationally estimate the critical size of kidney stone passing through ureter. We revealed that the critical size of kidney stone is related to ureter size, about 11%-22% larger than the inner diameter of ureter. Further, based upon the Winkler elastic foundation beam model, we developed a simplified stone-ureter interaction model to evaluate how this critical size is dependent upon the stiffness of ureter and the surface roughness of kidney stone. The proposed model may help urologists improve the accuracy of personalized diagnosis and treatment.
Assuntos
Cálculos Renais , Ureter , Humanos , Cálculos Renais/terapiaRESUMO
During descent, a single-winged maple seed (samara) can naturally reach a delicate equilibrium state, stable autorotation, before landing. This article reveals the intrinsic equilibrium of a particular type of samaras in terms of measurable aerodynamic and geometric parameters. To this end, we conducted a series of in situ measurements for the rate of vertical descent (exclusive of crosswind) of an autorotating samara in a natural range of samara sizes and masses. We then extended the range of size and mass by introducing artificial samaras, with discrete mass elements purposely designed to approximate the asymmetrical and nonuniform distribution of mass found with natural samaras. Based on the widened range, a fundamental nondimensional correlation of dynamic pressure and disc loading was generalized, where all stable autorotation descent profiles collapse to a single descent characteristic curve, irrespective of the size and mass of the natural and artificial samara's specimens. Results reveal that for stably autorotating (both natural and artificial) samaras, their terminal descent velocity (expressed as dynamic pressure) and disc loading attained equilibrium at a value that is inversely proportional to the coefficient of lift.
RESUMO
Cell-laden microgels have attracted increasing interest in various biomedical fields, as living building blocks to construct spatially organized multicellular structures or complex tissue features (e.g., cell spheroids and aligned cells/fibers). Although numerous approaches have been developed to tailor cell-laden microgels, there is still an unmet need for modular, versatile, convenient, and high-throughput methods. In this study, as inspired by the phenomena of water droplet manipulation from natural microstructures, a novel platform is developed to manipulate microscale hydrogel droplets and fabricate modular cell-laden microgels. First, taking antenna-like trichome as a template, catcher-like bioinspired microstructures are fabricated and hydrogel droplets are manipulated modularly in a versatile, convenient, and high-throughput manner, which is compatible with various types of hydrogels (e.g., photo-cross-linking, thermal-cross-linking, and ion-cross-linking). It is demonstrated that this platform can manipulate cell-laden microgels as modular units, such as two or more cell-laden microgels on one single catcher-like structure and different structures on one single chip. The authors also demonstrate the application of this platform on constructing complex tissue features like myocardial fibrosis tissue models to study cardiac fibrosis. The developed platform will be a powerful tool for engineering various in vitro tissue models for widespread biomedical applications.
Assuntos
Microgéis , Hidrogéis/química , Engenharia Tecidual/métodosRESUMO
Osmotic stress is a severe condition frequently encountered by microorganisms; however, there is limited knowledge on the influence of hyperosmotic stress on the growth, development and pathogenicity of phytopathogenic fungi. Here, three osmotic conditions (0.4 M NaCl, 0.4 M KCl, and 0.6 M sorbitol supplemented in potato dextrose agar medium) were used to identify the effect of osmotic stress on the growth, development and pathogenicity of Setosphaeria turcica which is a plant pathogenic fungus and causes northern corn leaf blight disease in maize, sorghum, and related grasses. In osmotic stress, the growth rate of mycelium was decreased, and the number of vesicular structures and flocculent secretion outside the hypha cell wall were significantly increased. The qRT-PCR results showed that the osmotic stress quickly activated the HOG-MAPK pathway, up-regulated the expression of the downstream genes, and these genes were most highly expressed within 30 min of exposure to osmotic stress. Furthermore, the germination rate and the yield of conidia were significantly higher under osmotic stress than in the control. A pathogenicity analysis confirmed that pathogenicity of the conidia which were cultured under osmotic stress was significantly enhanced. By analyzing the knock-out mutants of an osmotic stress responsed gene StFPS1, an aquaglyceroporin downstream of the HOG-MAPK pathway, we found that StFPS1 was involved in the formation of appressorium and penetration peg, which affected the penetration ability of S. turcica. In summary, our work explained the correlation between osmotic stress and growth, development, and pathogenicity in S. turcica.
RESUMO
Liquid-filled capillary tubes are common structures in nature and engineering fields, which often function via vibration. Although liquid-solid interfacial tension plays important roles in the vibration behavior of the liquid-filled capillary tube, it remains elusive how the interfacial tension influences the natural frequency of capillary tube vibration. To address this, we developed a theory of beam-string structure to analyze the influence of liquid-solid interfacial tension on the vibration of a liquid-filled capillary cantilever. We used glass capillary tubes as a demo and experimentally validated the theory, where the reduced liquid-solid interfacial tension in a capillary tube decreases the natural frequencies of small-order modes. We then performed theoretical analysis and found that the change of elastocapillarity number, slenderness ratio and inner/outer radius ratio of capillary tubes enables: in higher order modes, a nonmonotonic change of natural frequency due to mode transformation between a beam and string; for lower order modes, decrease in the natural frequency to zero (increase from zero) due to mode disappearance (appearance). The developed theory would provide guidelines for high-accuracy design of capillary sensors.
Assuntos
Tubo Capilar , VibraçãoRESUMO
Droplet manipulation has found broad applications in various engineering and biomedical fields, such as biochemistry, microfluidic systems, drug delivery, and tissue engineering. Many methods have been developed to enhance the ability for manipulating droplets, among which magnetically actuated droplet manipulation has attracted widespread interests due to its remote, noninvasive manipulation ability and biocompatibility. This review summarizes the approaches and their principles that enable actuating the droplet magnetically. The potential biomedical applications of such a technique in bioassay, cell assembly, and tissue engineering are given.
Assuntos
Pesquisa Biomédica , Microfluídica , Engenharia TecidualRESUMO
The tissues of hollow organs can routinely stretch up to 2.5 times their length. Although significant pathology can arise if relatively large stretches are sustained, the responses of cells are not known at these levels of sustained strain. A key challenge is presenting cells with a realistic and well-defined three-dimensional (3D) culture environment that can sustain such strains. Here, we describe an in vitro system called microscale, magnetically-actuated synthetic tissues (micro-MASTs) to quantify these responses for cells within a 3D hydrogel matrix. Cellular strain-threshold and saturation behaviors were observed in hydrogel matrix, including strain-dependent proliferation, spreading, polarization, and differentiation, and matrix adhesion retained at strains sufficient for apoptosis. More broadly, the system shows promise for defining and controlling the effects of mechanical environment upon a broad range of cells.