"All in One" Strategy for Achieving Superprotonic Conductivity by Incorporating Strong Acids into a Robust Imidazole-Linked Covalent Organic Framework.

The fabrication of solid-state proton-conducting electrolytes possessing both high performance and long-life reusability is significant but challenging. An "all-in-one" composite, H3PO4@PyTFB-1-SO3H, including imidazole, sulfonic acid, and phosphoric acid, which are essential for proton conduction, was successfully prepared by chemical post-modification and physical loading in the rationally pre-synthesized imidazole-based nanoporous covalent organic framework (COF), PyTFB-1. The resultant H3PO4@PyTFB-1-SO3H exhibits superhigh proton conductivity with its value even highly up to 1.15 × 10-1 S cm-1 at 353 K and 98% relative humidity (RH), making it one of the highest COF-based composites reported so far under the same conditions. Experimental studies and theoretical calculations further confirmed that the imidazole and sulfonic acid groups have strong interactions with the H3PO4 molecules and the synergistic effect of these three groups dramatically improves the proton conductivity properties of H3PO4@PyTFB-1-SO3H. This work demonstrated that by aggregating multiple proton carriers into one composite, effective proton-conducting electrolyte can be feasibly achieved.

From Supramolecular Organic Cages to Porous Covalent Organic Frameworks for Enhancing Iodine Adsorption Capability by Fully Exposed Nitrogen-Rich Sites.

In order to overcome the limitations of supramolecular organic cages for their incomplete accessibility of active sites in the solid state and uneasy recyclability in liquid solution, herein a nitrogen-rich organic cage is rationally linked into framework systems and four isoreticular covalent organic frameworks (COFs), that is, Cage-TFB-COF, Cage-NTBA-COF, Cage-TFPB-COF, and Cage-TFPT-COF, are successfully synthesized. Structure determination reveals that they are all high-quality crystalline materials derived from the eclipsed packing of related isoreticular two-dimensional frameworks. Since the nitrogen-rich sites usually have a high affinity toward iodine species, iodine adsorption investigations are carried out and the results show that all of them display an enhancement in iodine adsorption capacities. Especially, Cage-NTBA-COF exhibits an iodine adsorption capacity of 304 wt%, 14-fold higher than the solid sample packed from the cage itself. The strong interactions between the nitrogen-rich sites and the adsorbed iodine species are revealed by spectral analyses. This work demonstrates that, utilizing the reticular chemistry strategy to extend the close-packed supramolecular organic cages into crystalline porous framework solids, their inherent properties can be greatly exploited for targeted applications.

Highly Enhancing CO2 Photoreduction by Metallization of an Imidazole-linked Robust Covalent Organic Framework.

Converting CO2 into value-added chemicals to solve the issues caused by carbon emission is promising but challenging. Herein, by embedding metal ions (Co2+ , Ni2+ , Cu2+ , and Zn2+ ) into an imidazole-linked robust photosensitive covalent organic framework (PyPor-COF), effective photocatalysts for CO2 conversion are rationally designed and constructed. Characterizations display that all of the metallized PyPor-COFs (M-PyPor-COFs) display remarkably high enhancement in their photochemical properties. Photocatalysis reactions reveal that the Co-metallized PyPor-COF (Co-PyPor-COF) achieves a CO production rate as high as up to 9645 µmol g-1 h-1 with a selectivity of 96.7% under light irradiation, which is more than 45 times higher than that of the metal-free PyPor-COF, while Ni-metallized PyPor-COF (Ni-PyPor-COF) can further tandem catalyze the generated CO to CH4 with a production rate of 463.2 µmol g-1 h-1 . Experimental analyses and theory calculations reveal that their remarkable performance enhancement on CO2 photoreduction should be attributed to the incorporated metal sites in the COF skeleton, which promotes the adsorption and activation of CO2 and the desorption of generated CO and even reduces the reaction energy barrier for the formation of different intermediates. This work demonstrates that by metallizing photoactive COFs, effective photocatalysts for CO2 conversion can be achieved.

Highly Effective Proton-Conductive Matrix-Mixed Membrane Based on a -SO3H-Functionalized Polyphosphazene.

A polyphosphazene with in-built -SO3H moieties (PP-PhSO3H) was facilely synthesized by the polymeric combination of hexachlorocyclotriphosphazene (HCCP) and sulfonate p-phenylenediamine. Characterization reveals that it is a highly stable amorphous polymer. Proton conductivity investigations showed that the synthesized PP-PhSO3H exhibits a proton conductivity of up to 6.64 × 10-2 S cm-1 at 353 K and 98% relative humidity (RH). This value is almost 2 orders of magnitude higher than the corresponding value for its -SO3H-free analogue, PP-Ph, which is 1.72 × 10-4 S cm-1 when measured under the same condition. Consequently, matrix-mixed membranes (labeled PP-PhSO3H-PAN) were further prepared by mixing PP-PhSO3H with polyacrylonitrile (PAN) in different ratios to test its potential application in the proton-exchange membrane (PEM) fuel cell. The analysis results indicate that when the weight ratio of PP-PhSO3H/PAN is 3:1 [named PP-PhSO3H-PAN (3:1)], its proton conductivity can reach up to 5.05 × 10-2 S cm-1 at 353 K and 98% RH, which is even comparable with those of proton-conductive electrolytes currently used in PEM fuel cells. Furthermore, the continuous test demonstrates that the PP-PhSO3H-PAN (3:1) has long-life reusability. This research reveals that by using phosphazene and sulfonated multiple-amine modules as precursors, organic polymers with excellent proton conductivity for the assembly of matrix-mixed membranes in PEM fuel cells can be easily synthesized by a simple polymeric process.

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide.

Developing a facile strategy to construct low-cost and efficient proton-conductive electrolytes is pivotal in the practical application of proton exchange membrane (PEM) fuel cells. Herein, a polyamide with in-built -SO3H moieties, PA(PhSO3H)2, was synthesized via a simple one-pot polymeric acylation process. Investigations via electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA(PhSO3H)2 displays a proton conductivity of up to 5.54 × 10-2 S cm-1 at 353 K under 98% relative humidity (RH), which is more than 2 orders of magnitude higher than that of its -SO3H-free analogue PA(Ph)2 (2.38 × 10-4 S cm-1) under the same conditions. Therefore, after mixing with polyacrylonitrile (PAN) at different ratios, PA(PhSO3H)2-based matrix-mixed membranes were subsequently made and the analysis results revealed that the proton conductivity can reach up to 5.82 × 10-2 S cm-1 at 353 K and 98% RH when the weight ratio of PA(PhSO3H)2 : PAN is in 3 : 1 (labeled as PA(PhSO3H)2-PAN(3 : 1)), the value of which is comparable even to those of commercially available electrolytes that are used in PEM fuel cells. In addition, continuous testing shows that PA(PhSO3H)2-PAN(3 : 1) possesses long-life reusability. This work demonstrates that, utilizing the simple reaction of polymeric acylation with a sulfonated module as a precursor, highly effective proton-conductive membranes for PEM fuel cells can be achieved in a facile manner.

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide.

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming "hydrogen economy" society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO3H moieties (PA-PhSO3H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO3H displays a proton conductivity of up to 8.85 × 10-2 S·cm-1 at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO3H-free analogue, PA-Ph (6.30 × 10-4 S·cm-1), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10-2 S·cm-1 at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO3H:PAN is 3:1 (labeled as PA-PhSO3H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO3H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.

High Enhancement in Proton Conductivity by Incorporating Sulfonic Acids into a Zirconium-Based Metal-Organic Framework via "Click" Reaction.

Taking a robust zirconium-based metal-organic framework, UiO-66, as a prototype, functional postmodification via the versatile Cu(I)-catalyzed azide-alkyne "click" reaction was carried out, and sulfonic acid groups were successfully grafted into its skeleton. Characterizations revealed that the MOF network was still well maintained after being treated by "clicked" modification. Investigations by electrochemical impedance spectroscopy measurements revealed that its proton conductivity increases exponentially up to 8.8 × 10-3 S cm-1 at 80 °C and 98% RH, while those of the UiO-66 and UiO-66-NH2 are only 6.3 × 10-6 and 3.5 × 10-6 S cm-1, respectively, at the same condition. Additionally, the continuous test shows it possesses long-life reusability. Such a remarkable enhancement on the proton conductivities and high performance in long-life reusability of the resultant MOF demonstrated that the "click" reaction is a facile reaction in postmodification of robust porous materials toward targeted applications, with which highly promising candidates of proton-conductive electrolytes for applying in proton-exchange-membrane (PEM) fuel cell can be achieved.

Water-Binding-Mediated Gelation/Crystallization and Thermosensitive Superchirality.

Determination of molecular structural parameters of hydrophobic cholesterol-naphthalimide conjugates for water binding capabilities as well as their moisture-sensitive supramolecular self-assembly were revealed. Water binding was a key factor in leading trace water-induced crystallization against gelation in apolar solvent. Ordered water molecules entrapped in self-assembly arrays revealed by crystal structures behave as hydrogen-bonding linkers to facilitate three-dimensional growth into crystals rather than one-dimensional gel nanofibers. Water binding was also reflected on the supramolecular chirality inversion of vesicle self-assembly in aqueous media via heating-induced dehydration. Structural parameters that favor water binding were evaluated in detail, which could help rationally design organic building units for advancing soft materials, crystal engineering, and chiral recognition.

A Triazole-Containing Metal-Organic Framework as a Highly Effective and Substrate Size-Dependent Catalyst for CO2 Conversion.

A highly porous metal-organic framework (MOF) incorporating both exposed metal sites and nitrogen-rich triazole groups was successfully constructed via solvothermal assembly of a clicked octcarboxylate ligand and Cu(II) ions, which presents a high affinity toward CO2 molecules clearly verified by gas adsorption and Raman spectral detection. The constructed MOF featuring CO2-adsorbing property and exposed Lewis-acid metal sites could serve as an excellent catalyst for CO2-based chemical fixation. Catalytic activity of the MOF was confirmed by remarkably high efficiency on CO2 cycloaddition with small epoxides. When extending the substrates to larger ones, its activity showed a sharp decrease. These observations reveal that MOF-catalyzed CO2 cycloaddition of small substrates was carried out within the framework, while large ones cannot easily enter into the porous framework for catalytic reactions. Thus, the synthesized MOF exhibits high catalytic selectivity to different substrates on account of the confinement of the pore diameter. The high efficiency and size-dependent selectivity toward small epoxides on catalytic CO2 cycloaddition make this MOF a promising heterogeneous catalyst for carbon fixation.

Bimetallic Metal-Organic Frameworks: Probing the Lewis Acid Site for CO2 Conversion.

A highly porous metal-organic framework (MOF) incorporating two kinds of second building units (SBUs), i.e., dimeric paddlewheel (Zn2 (COO)4 ) and tetrameric (Zn4 (O)(CO2 )6 ), is successfully assembled by the reaction of a tricarboxylate ligand with Zn(II) ion. Subsequently, single-crystal-to-single-crystal metal cation exchange using the constructed MOF is investigated, and the results show that Cu(II) and Co(II) ions can selectively be introduced into the MOF without compromising the crystallinity of the pristine framework. This metal cation-exchangeable MOF provides a useful platform for studying the metal effect on both gas adsorption and catalytic activity of the resulted MOFs. While the gas adsorption experiments reveal that Cu(II) and Co(II) exchanged samples exhibit comparable CO2 adsorption capability to the pristine Zn(II) -based MOF under the same conditions, catalytic investigations for the cycloaddition reaction of CO2 with epoxides into related carbonates demonstrate that Zn(II) -based MOF affords the highest catalytic activity as compared with Cu(II) and Co(II) exchanged ones. Molecular dynamic simulations are carried out to further confirm the catalytic performance of these constructed MOFs on chemical fixation of CO2 to carbonates. This research sheds light on how metal exchange can influence intrinsic properties of MOFs.

Ruthenium-Catalyzed Oxidative Homocoupling of Arylboronic Acids in Water: Ligand Tuned Reactivity and Mechanistic Study.

Molecular catalysts based on water-soluble arene-Ru(II) complexes ([Ru]-1-[Ru]-5) containing aniline (L1), 2-methylaniline (L2), 2,6-dimethylaniline (L3), 4-methylaniline (L4), and 4-chloroaniline (L5) were designed for the homocoupling of arylboronic acids in water. These complexes were fully characterized by (1)H, (13)C NMR, mass spectrometry, and elemental analyses. Structural geometry for two of the representative arene-Ru(II) complexes [Ru]-3 and [Ru]-4 was established by single-crystal X-ray diffraction studies. Our studies showed that the selectivity toward biaryls products is influenced by the position and the electronic behavior of various substituents of aniline ligand coordinated to ruthenium. Extensive investigations using (1)H NMR, (19)F NMR, and mass spectral studies provided insights into the mechanistic pathway of homocoupling of arylboronic acids, where the identification of important organometallic intermediates, such as σ-aryl/di(σ-aryl) coordinated arene-Ru(II) species, suggested that the reaction proceeds through the formation of crucial di(σ-aryl)-Ru intermediates by the interaction of arylboronic acid with Ru-catalyst to yield biaryl products.

Troponate/Aminotroponate Ruthenium-Arene Complexes: Synthesis, Structure, and Ligand-Tuned Mechanistic Pathway for Direct C-H Bond Arylation with Aryl Chlorides in Water.

A series of water-soluble troponate/aminotroponate ruthenium(II)-arene complexes were synthesized, where O,O and N,O chelating troponate/aminotroponate ligands stabilized the piano-stool mononuclear ruthenium-arene complexes. Structural identities for two of the representating complexes were also established by single-crystal X-ray diffraction studies. These newly synthesized troponate/aminotroponate ruthenium-arene complexes enable efficient C-H bond arylation of arylpyridine in water. The unique structure-activity relationship in these complexes is the key to achieve efficient direct C-H bond arylation of arylpyridine. Moreover, the steric bulkiness of the carboxylate additives systematically directs the selectivity toward mono- versus diarylation of arylpyridines. Detailed mechanistic studies were performed using mass-spectral studies including identification of several key cyclometalated intermediates. These studies provided strong support for an initial cycloruthenation driven by carbonate-assisted deprotonation of 2-phenylpyridine, where the relative strength of η(6)-arene and the troponate/aminotroponate ligand drives the formation of cyclometalated 2-phenylpyridine Ru-arene species, [(η(6)-arene)Ru(κ(2)-C,N-phenylpyridine) (OH2)](+) by elimination of troponate/aminotroponate ligands and retaining η(6)-arene, while cyclometalated 2-phenylpyridine Ru-troponate/aminotroponate species [(κ (2)-troponate/aminotroponate)Ru(κ(2)-C,N-phenylpyridine)(OH2)2] was generated by decoordination of η(6)-arene ring during initial C-H bond activation of 2-phenylpyridine. Along with the experimental mass-spectral evidence, density functional theory calculation also supports the formation of such species for these complexes. Subsequently, these cycloruthenated products activate aryl chloride by facile oxidative addition to generate C-H arylated products.

Size-controlled synthesis of Ag nanoparticles functionalized by heteroleptic dipyrrinato complexes having meso-pyridyl substituents and their catalytic applications.

The syntheses of heteroleptic dipyrrinato nickel(II) complexes [Ni(4-pydpm)(dedtc)] (1) and [Ni(4-pydpm)(dipdtc)] (2) [4-pydpm = 5-(4-pyridyl)dipyrromethene; dedtc = diethyldithiocarabamate; and dipdtc = diisopropyldithiocarbamate] and the thorough characterization of these complexes by satisfactory elemental analyses, electrospray ionization mass spectrometry, Fourier-transform infrared, NMR ((1)H, (13)C), and UV-vis spectroscopies, and electrochemical studies was achieved. Structure of 1 was authenticated by X-ray single-crystal analysis. Both the complexes 1 and 2 were successfully utilized as a capping agent in the preparation of silver nanoparticles. Availability of free pyridyl nitrogen on the dipyrrin core of these complexes was meticulously exploited in functionalization and stabilization of the silver nanoparticles (AgNPs). Morphological and structural investigations on colloidal nanoparticles were followed by UV-vis spectroscopy and transmission electron microscopy (TEM). Overall results revealed that average size of the silver nanoparticles (∼10, 15, 20 nm, and aggregation) is strongly influenced by ratio of Ag/[1/2] (03, 06, 10, 20). Correlation between particle size and capping agents was realized by UV-vis and TEM studies. Catalytic activity of the AgNPs obtained through this route was successfully employed in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). It was established that reduction process follows a pseudo-first-order kinetics.

Clicked Isoreticular Metal-Organic Frameworks and Their High Performance in the Selective Capture and Separation of Large Organic Molecules.

Three highly porous metal-organic frameworks (MOFs) with a uniform rht-type topological network but hierarchical pores were successfully constructed by the assembly of triazole-containing dendritic hexacarboxylate ligands with Zn(II) ions. These transparent MOF crystals present gradually increasing pore sizes upon extension of the length of the organic backbone, as clearly identified by structural analysis and gas-adsorption experiments. The inherent accessibility of the pores to large molecules endows these materials with unique properties for the uptake of large guest molecules. The visible selective adsorption of dye molecules makes these MOFs highly promising porous materials for pore-size-dependent large-molecule capture and separation.

Room-temperature chemoselective reduction of nitro groups using non-noble metal nanocatalysts in water.

Purely aqueous-phase chemoselective reduction of a wide range of aromatic and aliphatic nitro substrates has been performed in the presence of inexpensive Ni- and Co-based nanoparticle catalysts using hydrazine hydrate as a reducing agent at room temperature. Along with the observed high conversions and selectivities, the studied nanoparticle catalysts also exhibit a high tolerance to other highly reducible groups present in the nitro substrates. The development of these potential chemoselective reduction catalysts also provides a facile route for the synthesis of other industrially important fine chemicals or biologically important compounds, where other highly reducible groups are present in close proximity to the targeted nitro groups.

Robust links in photoactive covalent organic frameworks enable effective photocatalytic reactions under harsh conditions.

Developing heterogeneous photocatalysts for the applications in harsh conditions is of high importance but challenging. Herein, by converting the imine linkages into quinoline groups of triphenylamine incorporated covalent organic frameworks (COFs), two photosensitive COFs, namely TFPA-TAPT-COF-Q and TFPA-TPB-COF-Q, are successfully constructed. The obtained quinoline-linked COFs display improved stability and photocatalytic activity, making them suitable photocatalysts for photocatalytic reactions under harsh conditions, as verified by the recyclable photocatalytic reactions of organic acid involving oxidative decarboxylation and organic base involving benzylamine coupling. Under strong oxidative condition, the quinoline-linked COFs show a high efficiency up to 11831.6 µmol·g-1·h-1 and a long-term recyclable usability for photocatalytic production of H2O2, while the pristine imine-linked COFs are less catalytically active and easily decomposed in these harsh conditions. The results demonstrate that enhancing the linkage robustness of photoactive COFs is a promising strategy to construct heterogeneous catalysts for photocatalytic reactions under harsh conditions.

Strong Second-Harmonic Generation Induced by a Triphenylamine-Based Bismuth-Organic Framework for Photocatalytic Activity Enhancement.

Taking advantage of the well-defined geometry of metal centers and highly directional metal-ligand coordination bonds, metal-organic frameworks (MOFs) have emerged as promising candidates for nonlinear optical (NLO) materials. In this work, taking a photoresponsive carboxylate triphenylamine derivative as an organic ligand, a bismuth-based MOF, Bi-NBC, NBC = 4',4‴,4‴″-nitrilotris(([1,1'-biphenyl]-4-carboxylic acid)) is obtained. Structure determination reveals that it is a potential NLO material derived from its noncentrosymmetric structure, which is finally confirmed by its rarely strong second harmonic generation (SHG) effect. Theoretical calculations reveal that the potential difference around Bi atoms is large; therefore, it leads to a strong local built-in electric field, which greatly facilitates the charge separation and transfer and finally improves the photocatalytic performance. Our results provide a reference for the exploration of MOFs with NLO properties.

DNA binding and anti-cancer activity of redox-active heteroleptic piano-stool Ru(II), Rh(III), and Ir(III) complexes containing 4-(2-methoxypyridyl)phenyldipyrromethene.

The synthesis of four novel heteroleptic dipyrrinato complexes [(η(6)-arene)RuCl(2-pcdpm)] (η(6)-arene = C6H6, 1; C10H14, 2) and [(η(5)-C5Me5)MCl(2-pcdpm)] (M = Rh, 3; Ir, 4) containing a new chelating ligand 4-(2-methoxypyridyl)-phenyldipyrromethene (2-pcdpm) have been described. The complexes 1-4 have been fully characterized by various physicochemical techniques, namely, elemental analyses, spectral (ESI-MS, IR, (1)H, (13)C NMR, UV/vis) and electrochemical studies (cyclic voltammetry (CV) and differential pulse voltammetry (DPV)). Structures of 3 and 4 have been determined crystallographically. In vitro antiproliferative and cytotoxic activity of these complexes has been evaluated by trypan blue exclusion assay, cell morphology, apoptosis, acridine orange/ethidium bromide (AO/EtBr) fluorescence staining, and DNA fragmentation assay in Dalton lymphoma (DL) cell lines. Interaction of 1-4 with calf thymus DNA (CT DNA) has also been supported by absorption titration and electrochemical studies. Our results suggest that in vitro antitumor activity of 1-4 lies in the order 2 > 1 > 4 > 3.

Kinetically controlling phase transformations of crystalline mercury selenidostannates through surfactant media.

Herein we report the surfactant-thermal method to prepare two novel one-dimensional mercury selenidostannates, [DBUH]2[Hg2Sn2Se6(Se2)] (1) and [DBUH]2[Hg2Sn2Se7] (2), where DBU = 1,8-diazabicyclo[5.4.0]undec-7-ene, by applying PEG-400 as the reaction medium. It is worth noting that 1 is kinetically stable and can be transformed into thermodynamically stable phase 2 under a longer reaction time. Our strategy "growing crystalline materials in surfactants" could open a new door to preparing novel crystals with diverse structures and interesting properties.

DNA/protein binding, molecular docking, and in vitro anticancer activity of some thioether-dipyrrinato complexes.

Syntheses and characterizations of the arene ruthenium [(η(6)-C6H6)RuCl(4-mtdpm)] (1), [(η(6)-p-MeC6H4Pr(i))RuCl(4-mtdpm)] (2), and structurally analogous rhodium/iridium complexes [(η(5)-C5Me5)RhCl(4-mtdpm)] (3) and [(η(5)-C5Me5)IrCl(4-mtdpm)] (4) [4-mtdpm = 5-(4-methylthiophenyl)dipyrromethene] have been reported. Their identities have been established by satisfactory elemental analyses, electrospray ionization-mass spectrometry (ESI-MS), FT-IR, NMR ((1)H, (13)C), UV/vis, emission spectral, and electrochemical studies. Structure of the representative complex 3 has been authenticated by X-ray single crystal analyses. The complexes 1-4 effectively bind with calf thymus DNA (CT DNA) through intercalative/electrostatic interactions. In addition, these exhibit significant cytotoxicity toward Dalton lymphoma (DL) cell line and cause static quenching of the bovine serum albumin (BSA) fluorophore. The antiproliferative activity, morphological changes, and apoptosis have been evaluated by MTT assay, acridine orange/ethidium bromide (AO/EtBr) fluorescence staining, and DNA ladder assay. Mode of interaction of the complexes with DNA/protein has also been supported by molecular docking. Various studies revealed remarkable decrease in the in vitro DL cell proliferation and induction of the apoptosis by 1-4, which lies in the order 2 > 1 > 4 > 3.