Isolable T-Shaped Planar Silyl Anion.

Silyl anions have garnered significant attention due to their synthetic abilities. However, previously reported silyl anions have been limited to either trigonal-pyramidal or trigonal-planar geometries, which confine them primarily as nucleophiles in substitution reactions. Herein, we report the isolation of the unprecedented T-shaped planar silyl anion salt 2 by employment of a geometrically constrained triamido pincer ligand. Theoretical calculations disclosed that the silicon centre in 2 possesses both a lone pair of electrons and an empty 3pz orbital. In addition to nucleophilic substitution reactions with Ph3PAuCl and W(CO)6, 2 readily undergoes oxidative additions with CO2 and 2,6-dimethylphenylisonitrile at room temperature. Furthermore, under mild conditions, compound 2 cleaves Csp2-H, Csp3-H, and H-H bonds in 1,2,4,5-tetrafluorobenzene, an intramolecular iPr group, and dihydrogen, representing the first examples of C-H and H-H activations mediated by a silyl anion, respectively. This work unveils new reactivity of silyl anions owing to the non-classical geometry and electronic structure.

BN Analogue of Butadiyne: A Platform for Dinitrogen Release and Reduction.

Exploration of the metallomimetic chemistry of main group elements is of the utmost importance from the perspective of both fundamental research and potential applications. Here, we report the synthesis, bonding analysis, and reactivities of an isolable diiminoborane, Mes*B≡N─N≡BMes* (Mes* = 2,4,6-tri-tert-butylphenyl) (1), a BN analogue of butadiyne. This species is characterized by a conjugated B≡N─N≡B moiety, a structural feature that enables the controlled release of N2 when it is exposed to organic nitriles. Furthermore, the N2 unit in 1 could be reduced to an ammonium salt via cleavage of the BN triple bond. Our work shows a rare example of an unsaturated BN system, serving as a platform for both the release and reduction of N2. This discovery opens new pathways and holds substantial influence on the future design of functional main group N2 species.

Derivatization of an Alkylideneborane with B═C Bond Cleavage.

We present the synthesis, structural characterization, and reactivity of alkylideneborane 2, supported by π-donating N-heterocyclic imino and σ-donating N-heterocyclic carbene (NHC) ligands. The incorporation of these ligands effectively weakens the B═C bond strength, leading to enhanced reactivity. Consequently, selective cleavage of the B═C bond can be achieved using pyridine-N-oxide, sulfur, and selenium, resulting in the formation of 1,3-dioxa-2,4-diboretane 3, thioxoborane 4, and selenoborane 5, respectively. Furthermore, intriguing B═C bond insertions with CO2 and CS2 are observed, affording zwitterionic borenium/fluorenide 6 and dithiaboretane 7. The former species 6 is readily converted to transient oxoborane and imidazolium enolate, showcasing the bora-Wittig reaction of alkylideneborane. This investigation highlights the potential of alkylideneborane as a versatile building block for synthesizing novel organoboron compounds through unconventional transformations.

Near-Infrared Light-Activated Mesoporous Polydopamine for Temporomandibular Joint Osteoarthritis Combined Photothermal-Chemo Therapy.

The treatments generally employed for temporomandibular joint osteoarthritis (TMJOA) involve physical therapy and chemotherapy, etc., whose therapeutic efficacies are impaired by the side effects and suboptimal stimulus responsiveness. Although the intra-articular drug delivery system (DDS) has shown effectiveness in addressing osteoarthritis, there is currently little reported research regarding the use of stimuli-responsive DDS in managing TMJOA. Herein, we prepared a novel near-infrared (NIR) light-sensitive DDS (DS-TD/MPDA) by using mesoporous polydopamine nanospheres (MPDA) as NIR responders and drug carriers; diclofenac sodium (DS) as the anti-inflammatory medication; and 1-tetradecanol (TD) with a phase-inversion temperature of 39 °C as the drug administrator. Upon exposure to 808 nm NIR laser, DS-TD/MPDA could raise the temperature up to the melting point of TD through photothermal conversion, and intelligently trigger DS release. The resultant nanospheres exhibited an excellent photothermal effect and effectively controlled the release of DS through laser irradiation to accommodate the multifunctional therapeutic effect. More importantly, the biological evaluation of DS-TD/MPDA for TMJOA treatment was also performed for the first time. The experiments' results demonstrated that DS-TD/MPDA displayed a good biocompatibility in vitro and in vivo during metabolism. After injection into the TMJ of rats afflicted with TMJOA induced by unilateral anterior crossbite for 14 days, DS-TD/MPDA could alleviate the deterioration of TMJ cartilage, thus ameliorating osteoarthritis. Therefore, DS-TD/MPDA could be a promising candidate for photothermal-chemotherapy for TMJOA.

Multiple Color Emission of Mechanoluminescence and Photoluminescence from SrZnSO: Bi3+ for Multimode Anticounterfeiting.

Mechanoluminescence materials that emit light under mechanical stimulation have attracted widespread attention in sensing, anticounterfeiting, and imaging applications. In this study, a series of Sr1-xBixZnSO (0.001 ≤ x ≤ 0.1) samples was synthesized by the method of high temperature solid-state reaction. It is worth noting that the distortion degree of the SrO3S3 octahedron was increased with increasing Bi3+ concentration, and the color manipulated Sr1-xBixZnSO which can emit different photoluminescence (blue to dark blue and finally red) and mechanoluminescence (orange to red) colors is obtained. Moreover, the deep traps can stably store and provide electronic supplements in shallow traps released under mechanical stimulation. Therefore, devices made of SrZnSO:Bi3+ phosphor and polydimethylsiloxane (PDMS) can be used as thermo-mechano-opto three-mode anticounterfeiting. The ML intensity is linear to the external load and can be utilized for stress sensing or imaging.

Unveiling Hetero-Enyne Reactivity of Aryliminoboranes: Dearomative Hetero-Diels-Alder-Like Reactions.

Being isoelectronic with alkynes, iminoboranes with a polar B≡N triple bond have been exclusively investigated as a potent 1,2-dipole in synthetic chemistry. Herein, we disclose the unprecedented reactivity of aryliminoboranes via the BNCC π conjugation, namely hetero-enyne behavior. This allows for facile dearomative Diels-Alder-like reactions of aryliminoboranes with aldehydes. This cycloaddition features mild conditions, is catalyst-free, and has a broad substrate scope and good functional group tolerance. Kinetic and computational studies reveal its second-order reaction and concerted cyclization mechanism. This report unveils new synthetic application of iminoboranes beyond their classical reaction patterns.

Crystalline Neutral Diboron Analogues of Cyclopropanes.

Although Schleyer's computations in 1979 predicted that the ground state of the parent diborirane features a planar-tetracoordinate carbon atom (anti van't Hoff-Le Bel geometry), this work demonstrates that substitution of C coupled with N-heterocyclic carbene (NHC) coordination provides access to isolable diborirane derivatives 3 and 4 with van't Hoff-Le Bel geometry. Species 3 and 4 are isoelectronic with cyclopropane and the highly strained B2 C rings feature 2c-2e bent σ bonds. Consequently, the B-B and B-C bonds in 3 are cleaved in the presence of hydride, proton, and chalcogens. The former two reactions gave NHC-coordinated fluorenyldihydridoborane 5 and dichlorofluorenylborane 6, respectively, whereas the latter transformations afforded novel thiaborirane 8 and selenaborirane 9. In addition, transfer hydrogenation of 3 with ammonia borane (H3 N⋅BH3 ) led to the formation of (µ-hydrido)diborane 7 via selective cleavage of the B-B bond. These reactivities show potential for their future application in organic synthesis.

Boraiminolithium: An Iminoborane-Transfer Reagent.

BN/CC isosterism can give rise to attractive molecules with unique physical or chemical properties. We report here the synthesis, characterization, and reactivities of the boraiminolithium species 2, a room-temperature-stable crystalline solid accessible through a facile dehydrohalogenation/deprotonation reaction. This species, bearing a polarized B≡N triple bond and an anionic N center, is the first example of a BN analogue to the well-known alkynyllithium molecules (lithium acetylides). It has demonstrated a remarkable ability for iminoborane-transfer reactions, which allows for the isolation of a series of unprecedented N-functionalized iminoboranes as well as novel main-group heterocycles. Stable boraiminolithium reagents may become powerful tools in the exploration of new BN-containing building blocks for synthetic chemistry and materials science.

Performance of a CsI(Tl) scintillation screen with a dual-periodic structure based on an oxidized silicon micropore array template in X-ray imaging.

To address the reduction in the detection efficiency of a structured CsI(Tl) scintillation screen when its structure period reaches the order of microns, a dual-periodic structure of the screen is proposed. The special feature of the dual structure is that each unit of the primary structure is divided equally into either four or nine square column-shaped scintillation sub-units. The sub-units are separated only by SiO2 layers to form a secondary structure. The results show that the performance of a dual-structure CsI(Tl) screen in X-ray imaging is much better than that of a corresponding single-structure screen.

Facile Access to Alkylideneborane and Diborabutadiene N-Heterocyclic Carbene Complexes.

A facile route to synthesis of B═C double-bonded systems has been developed. Specifically, both dibromofluorenylborane (FluH-BBr2) and a 1,1-dibromo-2,2-difluorenyldiborane/dimethyl sulfide adduct [(FluH)2B-BBr2(SMe2)] could be smoothly dehydrobrominated and subsequently coordinated by N-heterocyclic carbenes (NHCs) with formation of the respective alkylideneborane 1 and diborabutadiene 3. The electronic structures of 1 and 3 are interrogated and compared with those of base-free counterparts through density functional theory calculations.

Computational and Experimental Investigations of the Fe2(µ-S2)/Fe2(µ-S)2 Equilibrium.

Density functional theory (DFT) calculations on Fe2S2(CO)6-2n(PMe3)2n for n = 0, 1, and 2 reveal that the most electron-rich derivatives (n = 2) exist as diferrous disulfides lacking an S-S bond. The thermal interconversion of the FeII2(S)2 and FeI2(S2) valence isomers is symmetry-forbidden. Related electron-rich diiron complexes [Fe2S2(CN)2(CO)4]2- of an uncertain structure are implicated in the biosynthesis of [FeFe]-hydrogenases. Several efforts to synthesize electron-rich derivatives of Fe2(µ-S2)(CO)6 (1) are described. First, salts of iron persulfido cyanides [Fe2(µ-S2)(CO)5(CN)]- and [Fe2(µ-S2)(CN)(CO)4(PPh3)]- were prepared by the reactions of NaN(tms)2 with 1 and Fe2(µ-S2)(CO)5(PPh3), respectively. Alternative approaches to electron-rich diiron disulfides targeted Fe2(µ-S2)(CO)4(diphosphine). Whereas the preparation of Fe2(µ-S2)(CO)4(dppbz) was straightforward, that of Fe2(µ-S2)(CO)4(dppv) required an indirect route involving the oxidation of Fe2(µ-SH)2(CO)4(dppv) (dppbz = C6H4-1,2-(PPh2)2, dppv = cis-C2H2(PPh2)2). DFT calculations indicate that the oxidation of Fe2(µ-SH)2(CO)4(dppv) produces singlet diferrous disulfide Fe2(µ-S)2(CO)4(dppv), which is sufficiently long-lived as to be trapped by ethylene. The reaction of 1 and dppv mainly afforded Fe2(µ-SCH=CHPPh2)(µ-SPPh2)(CO)5, implicating a S-centered reaction.

Hybrid Oxford unicompartmental knee arthroplasty has lower residual cement extrusion than cemented arthroplasty in treating end-stage unicompartmental knee osteoarthritis.

BACKGROUND: Hybrid Oxford unicompartmental knee arthroplasty (OUKA) consists of cementless femoral prostheses and cemented tibial prostheses. Although a hybrid OUKA has been used in clinical practice, the clinical outcome has not been reported. The purpose of this study was to compare the short-term clinical outcomes and rate of residual bone cement extrusion between hybrid and cemented prostheses and analyse the possible reasons for differences between outcomes. METHODS: A total of 128 knees (118 patients) with end-stage osteoarthritis were included in this study, of which underwent consecutive operations using unicondylar Oxford phase 3 implants from July 2017 and September 2019 in our centre. Follow-up was performed at 6 weeks, 3 and 6 months, 1 year and every year after operation, and complications and changes in the Oxford knee score (OKS) were recorded. The OKS of the two groups was analysed by the generalized estimating equation approach. Prosthesis-based standard fluoroscopy was performed in a timely manner after each operation, and the rate of residual cement extrusion of the two groups was estimated using T-tests and a multivariate regression analysis. RESULTS: Excluding the cases that lost follow-up, a total of 120 knees (65 in hybrid group and 55 in cemented group) were included in the analysis. There was no statistically significant difference in patient characteristics between the two groups (p > 0.05). The average follow-up time was 23.4 months (and ranged from 12 to 38 months). As of the last follow-up, there were no complications, such as dislocation, fracture, prosthesis loosening and subsidence, but one patient in the cemented group experienced symptoms caused by residual loose cement. Postoperative OKS in both groups improved significantly (p < 0.001). There was no significant difference in the OKS at any point during the follow-up or in the improvement of the OKS between the two groups (p > 0.05). Residual cement was mainly extruded behind the tibial prosthesis. The rate of hybrid periprosthetic residual cement extrusion was significantly lower in the hybrid group than in the cemented group, and the difference was statistically significant (OR = 3.38; p = 0.014). CONCLUSIONS: Hybrid OUKA is as effective as cemented OUKA in the short term after operation and can significantly reduce the residual cement extrusion rate around the tibial prosthesis.

Visible-Light-Promoted Cascade Radical Cyclization: Synthesis of Chroman-4-ones and Dihydroquinolin-4-ones.

A novel visible-light photoredox catalysis protocol for the effective and efficient synthesis of 3-substituted chroman-4-ones and 2,3-dihydroquinolin-4(1H)-ones via tandem radical addition/cyclization of alkenyl aldehydes has been described. This reaction features a broad substrate scope, mild reaction conditions, and good functional group tolerance character.

Improved Phase Stability and Enhanced Luminescence of Calcite Phase LuBO3:Ce3+ through Ga3+ Incorporation.

The application of LuBO3:Ce3+ (LBO:Ce) crystal as an excellent scintillation material has been limited due to its poor phase stability at high temperature or high pressure, so improving the phase stability is essential for promoting its development. Ga stabilized LuBO3:Ce3+ (LGBO:Ce) is synthesized by solid-state reaction at 1200 °C. Powder X-ray diffraction patterns and Raman spectra at ambient pressure show that all the samples are pure calcite phase. In situ high-pressure synchrotron radiation XRD patterns illustrate that calcite phase LGBO:Ce exhibits more excellent phase stability than that of LBO:Ce under high pressure due to the superior compressibility of the [GaO6] octahedral unit. The optical band gap of LGBO decreases from 5.58 to 4.64 eV after introducing 10% Ga, which leads to the decreased nonradiative transition and about double luminescence intensity as expected. More interestingly, the charge transition from O2- to Ce4+ is observed at about 290 nm in the absorption spectra. The X-ray photoelectron spectroscopy spectra indicate the ratio of Ce4+/Ce3+ increases with increasing concentration of Ga3+, which can be attributed to the variation of energy separation between the 4f ground state of Ce3+ and the Fermi energy level position. In contrast to the enhancement of PL intensity, the integrated X-ray excited luminescence intensity decreases after Ga3+ incorporation attributing to the result of both decreased effective atomic number and ionization energy between 5d1 level and conduction band. The thermal luminescence spectra show that after the incorporation of Ga3+ the oxygen vacancy and intrinsic defects in LBO remain unchanged but that the concentration of oxygen vacancy significantly reduces. The mechanism of Ga3+ incorporation on phase stability and luminescence properties of LBO:Ce has been proposed and discussed systematically.

Application of computational fluid dynamics models for the evaluation of salivary flow patterns and related bacterial accumulation around orthodontic brackets.

OBJECTS: To simulate and compare salivary flow patterns over a tooth surface bonded with different orthodontic appliances using computational fluid dynamics (CFD) and investigate the impact of bracket design on salivary flow in relation to peri-bracket bacterial accumulation. SETTING AND SAMPLE POPULATION: The models were constructed using computed tomography (CT) data of 81 patients scheduled for fixed orthodontic treatment: 27 patients (10 males, 17 females) for the metal Victory MBT™ bracket; 27 patients (seven males, 20 females) for the ceramic Clarity MBT™ bracket; 27 patients (15 males, 12 females) for the Mini Uni-Twin (MUT) bracket. METHODS: The salivary flow patterns were simulated by CFD and compared between the groups and the model predictions were validated using a bacteriological experiment. RESULTS: The MUT bracket was associated with the greatest number of low salivary velocity areas, as it is designed with a connector between double tie wings and a right contact angle between tooth surface and bracket base. After archwire placement, the centred slot in the bracket and the bilateral sites around the bracket had higher bacterial retention and needed special oral hygiene measures. The obtuse contact angle of the ceramic bracket formed a pocket structure in the tie-wing area, retarding salivary flow and contributing to bacteria retention. CONCLUSION: With the evaluation of CFD models, we demonstrate that salivary flow patterns over a tooth surface with a bracket vary with bracket designs and further promote bacterial retention in specific locations, suggesting the need for additional oral hygiene measures for specific bracket types.

Redox and "Antioxidant" Properties of Fe2(µ-SH)2(CO)4(PPh3)2.

The chemistry of Fe2(µ-SH)2(CO)4(PPh3)2 (2HH) is described with attention to S-S coupling reactions. Produced by the reduction of Fe2(µ-S2)(CO)4(PPh3)2 (2), 2HH is an analogue of Fe2(µ-SH)2(CO)6 (1HH), which exhibits well-behaved S-centered redox. Both 2HH and the related 2MeH exist as isomers that differ with respect to the stereochemistry of the µ-SR ligands (R = H, Me). Compounds 2HH, 2MeH, and 2 protonate to give rare examples of Fe-SH and Fe-S2 hydrides. Salts of [H2]+, [H2HH]+, and [H2MeH]+ were characterized crystallographically. Complex 2HH reduces O2, H2O2, (PhCO2)2, and Ph2N2, giving 2. Related reactions involving 1HH gave uncharacterizable polymers. The differing behaviors of 2HH and 1HH reflect stabilization of the ferrous intermediates by the PPh3 ligands. When independently generated by the reaction of 2HH with 2,2,6,6-tetramethyl-1-piperidinyloxy, 2* quantitatively converts to 2 or, in the presence of C2H4, is trapped as the ethanedithiolate Fe2(µ-S2C2H4)(CO)4(PPh3)2. Evidence is presented that the Hieber-Gruber synthesis of 1 involves polysulfido intermediates [Fe2(µ-S n)2(CO)6]2- ( n > 1). Two relevant experiments are as follows: (i) protonation of [Fe4(µ-S)2(µ-S2)CO)12]2- gives 1 and 1HH, and (ii) oxidation of 1HH by sulfur gives 1.

Development of ZnO-based nanorod arrays as scintillator layer for ultrafast and high-spatial-resolution X-ray imaging system.

Under excitation of high-energy and low-flux density of X-ray beam, a 1-µm system spatial resolution was initially achieved by using an 18-µm thickness ZnO nanorod array as the scintillator layer in X-ray imaging beamline at Shanghai Synchrotron Radiation Facility. The decay time measurements indicated the ultraviolet and visible emissions of the arrays were subnanosecond and nanosecond, respectively. Through hydrogen annealing treatment, the ultraviolet luminescence was intensively enhanced and the visible luminescence was remarkably suppressed simultaneously. In conclusion, it can be determined that the ZnO-based nanorod arrays are the decent candidates for applications in ultrafast and high-spatial-resolution X-ray imaging systems.

Electron-Rich, Diiron Bis(monothiolato) Carbonyls: C-S Bond Homolysis in a Mixed Valence Diiron Dithiolate.

The synthesis and redox properties are presented for the electron-rich bis(monothiolate)s Fe2(SR)2(CO)2(dppv)2 for R = Me ([1]0), Ph ([2]0), CH2Ph ([3]0). Whereas related derivatives adopt C2-symmetric Fe2(CO)2P4 cores, [1]0-[3]0 have Cs symmetry resulting from the unsymmetrical steric properties of the axial vs equatorial R groups. Complexes [1]0-[3]0 undergo 1e- oxidation upon treatment with ferrocenium salts to give the mixed valence cations [Fe2(SR)2(CO)2(dppv)2]+. As established crystallographically, [3]+ adopts a rotated structure, characteristic of related mixed valence diiron complexes. Unlike [1]+ and [2]+ and many other [Fe2(SR)2L6]+ derivatives, [3]+ undergoes C-S bond homolysis, affording the diferrous sulfido-thiolate [Fe2(SCH2Ph)(S)(CO)2(dppv)2]+ ([4]+). According to X-ray crystallography, the first coordination spheres of [3]+ and [4]+ are similar, but the Fe-sulfido bonds are short in [4]+. The conversion of [3]+ to [4]+ follows first-order kinetics, with k = 2.3 × 10-6 s-1 (30 °C). When the conversion is conducted in THF, the organic products are toluene and dibenzyl. In the presence of TEMPO, the conversion of [3]+ to [4]+ is accelerated about 10×, the main organic product being TEMPO-CH2Ph. DFT calculations predict that the homolysis of a C-S bond is exergonic for [Fe2(SCH2Ph)2(CO)2(PR3)4]+ but endergonic for the neutral complex as well as less substituted cations. The unsaturated character of [4]+ is indicated by its double carbonylation to give [Fe2(SCH2Ph)(S)(CO)4(dppv)2]+ ([5]+), which adopts a bioctahedral structure.

Comparison of Class II open bite correction by temporomandibular joint prostheses or bimaxillary orthognathic surgery.

INTRODUCTION: The aim of this study was to evaluate the outcome of skeletal Class II and anterior open bite patients who received simultaneous Le fort I osteotomies with temporomandibular joint (TMJ) prostheses or bimaxillary orthognathic surgery. MATERIALS AND METHODS: Patients with condylar resorption (CR) were treated by TMJ prostheses and orthognathic surgery and divided into two groups. Cephalometric radiographs were obtained before and after operation to find out the surgical alteration by comparing measures at different time points. RESULTS: 23 patients were included. Mean overbite of the patients was increased by 3.39 mm in TMJ prostheses group and 3.24 mm in orthognathic group. Occlusal plane angle was averagely rotated -6.06° and 1.31°; mandibular plane counterclockwise rotated 12.23° and 5.81°, respectively. The increase of ramus height in TMJ prostheses group were significantly greater than orthognathic surgery group (8.02 ± 1.96 mm vs. -0.09 ± 1.29 mm). The overall treatment effect was stable in both groups during the 1-year follow up. DISCUSSION: Two surgical plans seem to be reliable treatments of anterior open bite and mandibular retrognathism caused by temporomandibular disease. TMJ prostheses with simultaneous Le fort I osteotomies close open bite by lengthening the height of ramus and rotating maxillo-mandibular complex counterclockwise, while bimaxillary orthognathic surgery by rotating maxilla clockwise and mandible counterclockwise without rebuilding ramus.

Spectrally Tunable Lead-Free Perovskite Rb2ZrCl6:Te for Information Encryption and X-ray Imaging.

A series of lead-free Rb2ZrCl6:xTe4+ (x = 0%, 0.1%, 0.5%, 1.0%, 2.0%, 3.0%, 5.0%, 10.0%) perovskite materials were synthesized through a hydrothermal method in this work. The substitution of Te4+ for Zr in Rb2ZrCl6 was investigated to examine the effect of Te4+ doping on the spectral properties of Rb2ZrCl6 and its potential applications. The incorporation of Te4+ induced yellow emission of triplet self-trapped emission (STE). Different luminescence wavelengths were regulated by Te4+ concentration and excitation wavelength, and under a low concentration of Te4+ doping (x ≤ 0.1%), different types of host STE emission and Te4+ triplet state emission could be achieved through various excitation energies. These luminescent properties made it suitable for applications in information encryption. When Te4+ was doped at high concentrations (x ≥ 1%), yellow triplet state emission of Te4+ predominated, resulting in intense yellow emission, which stemmed from strong exciton binding energy and intense electron-phonon coupling. In addition, a Rb2ZrCl6:2%Te4+@RTV scintillating film was fabricated and a spatial resolution of 3.7 lp/mm was achieved, demonstrating the potential applications of Rb2ZrCl6:xTe4+ in nondestructive detection and bioimaging.