Iontophoresis on Porcine and Human Gingiva.

PURPOSE: Iontophoresis is a noninvasive method that enhances drug delivery using an electric field. This method can improve drug delivery to the tissues in the oral cavity. The effects of iontophoresis on gingival drug delivery have not been investigated. The objectives of this study were to (a) determine the flux enhancement of model permeants across porcine and human gingiva during iontophoresis, (b) examine the transport mechanisms of gingival iontophoresis, and (c) evaluate the potential of iontophoretically enhanced delivery for three model drugs lidocaine, ketorolac, and chlorhexidine. METHODS: Passive and iontophoretic fluxes were determined with porcine and human gingiva using a modified Franz diffusion cell and model drugs and permeants. To investigate the transport mechanisms of iontophoresis, the enhancement from the direct-field effect was determined by positively and negatively charged model permeants. The electroosmosis enhancement effect was determined with neutral permeants of different molecular weight. The alteration of the gingival barrier due to electropermeabilization was evaluated using electrical resistance measurements. RESULTS: Significant flux enhancement was observed during gingival iontophoresis. The direct-field effect was the major mechanism governing the iontophoretic transport of the charged permeants. Electroosmosis was from anode to cathode. The effective pore radius of the iontophoretic transport pathways in the porcine gingiva was ~0.68 nm. Irreversible electropermeabilization was observed after 2 and 4 h of iontophoresis under the conditions studied. CONCLUSION: Iontophoresis could enhance drug delivery and reduce transport lag time, showing promise for gingival drug delivery.

Effect of pH on Iontophoretic Transport of Pramipexole Dihydrochloride across Human Epidermal Membrane.

PURPOSE: Drugs with higher molecular charges generally show higher flux enhancement when electromigration is the main mechanism in transdermal iontophoresis. This study evaluated the effect of decreasing the formulation pH to increase the positive charges of pramipexole dihydrochloride (PXCl) on its iontophoretic transport across skin. METHODS: In vitro transdermal iontophoresis of PXCl in buffer solution isotonized with either sodium chloride or mannitol were performed in a pH range of 3.0-7.0. Experiments of iontophoresis under symmetric condition with respect to donor and receiver pH and passive transport of the drugs after pretreatment with iontophoresis were conducted to investigate the transport mechanism involved. RESULTS: Iontophoretic permeation of PXCl was pH-dependent in drug solution isotonized with mannitol. The iontophoretic flux of PXCl with valence z = +2 at pH 3.0 was half of that of PXCl with z = +1 at pH 7.0. The results suggest that the decrease in PXCl delivery at higher valence at pH 3 was mainly due to pH-dependent selectivity of PX ion permeation across the skin and not electroosmosis. CONCLUSIONS: Skin permselectivity is a significant factor for iontophoretic transport of PXCl, and reducing formulation pH to increase the positive charges on PX ions did not enhance PXCl delivery.

Effect of Pulsed Direct Current on Iontophoretic Delivery of Pramipexole across Human Epidermal Membrane In Vitro.

PURPOSE: Pulsed direct current (PDC) iontophoresis, by allowing skin depolarization, was suggested to provide more efficient ion transport, but the extent of its enhancement effect was unclear. PDC could also offer electric-customized drug delivery. This study examined the effect of PDC iontophoresis on transdermal delivery of pramipexole dihydrochloride (PXCl). METHODS: Iontophoretic delivery of PXCl across human epidermal membrane from pH 7.0 solution was conducted in vitro using continuous direct current (DC) and 6- and 12-cycle PDC iontophoresis (0.5 mA/cm2 and total applied duration of 6 h). Different parameters of PDC iontophoresis were studied, including current density (0.1, 0.2 and 0.5 mA/cm2) and on-off current dosing pattern (1 h/3 h, 0.5 h/3.5 h, and 0.2 h/3.8 h). RESULTS: Both 6- and 12-cycle PDC iontophoresis protocols provided modulation of the permeation profile but delivered smaller amounts of PXCl (396 and 400 µg/cm2, respectively) as compared with continuous DC iontophoresis (482 µg/cm2) at 24 h after 0.5 mA/cm2 and 180 mA/cm2 × min current dose application. Increasing applied current density from 0.1 to 0.5 mA/cm2 increased the PDC iontophoretic flux of PXCl linearly from 5.3 to 14.6 µg/cm2·h (R2 = 0.887). Varying the current level and duration but at the same applied current dose (36 mA/cm2 × min), the total amount of PXCl delivered by PDC iontophoresis at 24 h was independent of the on-off dosing pattern studied (114-128 µg/cm2). CONCLUSIONS: The results indicate that PDC iontophoresis can benefit transdermal delivery of PXCl in terms of controlling its permeation but does not enhance iontophoretic transport compared to continuous DC iontophoresis under the conditions studied.

Influencing factors on gelatin matrix for chlorhexidine delivery.

OBJECTIVE: The objective was to evaluate the influencing factors in the fabrication of gelatin matrix (gelatin chips) for drug delivery. The attributes affecting drug release characteristics of the gelatin products were examined. SIGNIFICANCE: Understanding the attributes that affect drug release from gelatin matrix could provide the knowledge base for the development, manufacturing, and performance evaluation of gelatin-based drug products for sustained drug delivery. METHODS: Chlorhexidine (CHX) was the model drug in the gelatin-product testing. The gelatin products were fabricated by two methods: a single-pot mixing of all the components and a two-step gelatin crosslinking followed by drug loading. Different gelatin types (Type A porcine and Type B bovine), glutaraldehyde (GTA) crosslinking conditions, glycerin concentration, and CHX concentration in drug loading and loading time were used to fabricate the products. The cumulative amounts of CHX release from the gelatin products were determined using in vitro release testing (IVRT). RESULTS: The attributes affecting CHX release from the gelatin products were gelatin type, GTA crosslinking, and CHX loading concentration. The fabrication methods (two-step method of gelatin crosslinking and drug loading by equilibration vs. direct mixing of the components) also affected CHX release. Other attributes such as glycerin and CHX loading time did not show significant effects on drug release under the conditions studied. In addition, the results in the two IVRT methods employed in this study were comparable. CONCLUSION: Gelatin products of qualitative (Q1) and quantitative (Q2) differences could lead to different drug release behaviors. Drug release was also affected by the ingredient mixing steps during gelatin chip fabrication.

In Vitro Penetration of Petrolatum in Stratum Corneum from Bodywash Formulation.

Petrolatum is a mixture of hydrocarbons that is widely used as a moisturizer. It is incorporated in bodywash formulations to help hydrate and maintain healthy skin appearance. The aim of this study was to investigate skin deposition and penetration of petrolatum from an experimental bodywash system consisting of petrolatum in vitro. Experiments were performed using cadaver split-thickness skin and Franz diffusion cells. Radiolabeled 14C-dotriacontane (C32-alkane) was used as a model permeant for petrolatum. The bodywash was applied on the skin and subsequently rinsed. At predetermined time points, the skin was wiped to remove the residual material on the surface, and tape-stripping was performed. Petrolatum was observed to deposit from the bodywash when applied on split-thickness skin with simulated rinsing. Petrolatum then penetrated into the stratum corneum and was detected at the depth of 12 tape-stripping and in the epidermis. The bodywash formulation could provide significant deposition and penetration of petrolatum into the stratum corneum at 1-72 hours postapplication.

Characterization of Temperature Profiles in Skin and Transdermal Delivery System When Exposed to Temperature Gradients In Vivo and In Vitro.

PURPOSE: Performance of a transdermal delivery system (TDS) can be affected by exposure to elevated temperature, which can lead to unintended safety issues. This study investigated TDS and skin temperatures and their relationship in vivo, characterized the effective thermal resistance of skin, and identified the in vitro diffusion cell conditions that would correlate with in vivo observations. METHODS: Experiments were performed in humans and in Franz diffusion cells with human cadaver skin to record skin and TDS temperatures at room temperature and with exposure to a heat flux. Skin temperatures were regulated with two methods: a heating lamp in vivo and in vitro, or thermostatic control of the receiver chamber in vitro. RESULTS: In vivo basal skin temperatures beneath TDS at different anatomical sites were not statistically different. The maximum tolerable skin surface temperature was approximately 42-43°C in vivo. The temperature difference between skin surface and TDS surface increased with increasing temperature, or with increasing TDS thermal resistance in vivo and in vitro. CONCLUSIONS: Based on the effective thermal resistance of skin in vivo and in vitro, the heating lamp method is an adequate in vitro method. However, the in vitro-in vivo correlation of temperature could be affected by the thermal boundary layer in the receiver chamber.

Understanding the formidable nail barrier: A review of the nail microstructure, composition and diseases.

The topical treatment of nail fungal infections has been a focal point of nail research in the past few decades as it offers a much safer and focused alternative to conventional oral therapy. Although the current focus remains on exploring the ways of enhancing permeation through the formidable nail barrier, the understanding of the nail microstructure and composition is far from complete. This article reviews our current understanding of the nail microstructure, composition and diseases. A few of the parameters affecting the nail permeability and potential causes of the recurrence of fungal nail infection are also discussed.

Characterization of silicone pressure-sensitive adhesive episcleral implant for drug delivery.

The development of an effective sustained ocular drug delivery system remains a challenging task. The objective of the present study was to characterize a silicone pressure sensitive adhesive (PSA) episcleral implant system for transscleral drug delivery. Silicone PSA implants for dexamethasone, atenolol, and bovine serum albumin (BSA) were prepared at different polymer-to-drug mass ratios. Implant adhesion to human cadaver sclera was measured. Drug release experiments were conducted in well-stirred containers in vitro. The results were then analyzed using a pharmacokinetic model and in vitro-in vivo data comparison from previous studies. The silicone PSA episcleral implants in the present study had an average diameter of 3.5 mm and a thickness of 0.8 mm. Drug release from the silicone PSA implants was influenced by drug solubility, implant polymer content, and implant coating. Drug release from the implants was observed to follow the receding boundary release mechanism and was solubility dependent with the higher water solubility drug showing higher release rate than the low-solubility drug. Increasing polymer content in the implants led to a significant decrease in the drug release rate. Coated implants reduced the initial burst effect and provided lower release rates than the uncoated implants. These implants provided sustained drug release that could last up to several months in vitro and demonstrated the potential to offer drug delivery for chronic ocular diseases via the transscleral route.

Diffusion of uncharged solutes through human nail plate.

Passive diffusion data for uncharged solutes in hydrated human nail plate are collected and compared to the predictions of two theories for diffusion of uncharged solutes in dense keratin matrices. Quantitative agreement between the experimental data and the theories examined is poor. Concerns with both the experiments and the theories are identified and discussed. It is evident from the analysis that magnitude of the experimental nail permeability data may be questioned, as may the extrapolation procedures used to estimate the properties of dense fiber arrays from more dilute systems. Despite these caveats, it can be inferred that the microstructure of the nail plate is more complex than that assumed in the described models. The influence of residual lipids is implicated. More rigorous experiments and theoretical analysis of mass transport in the nail plate system are warranted. Successful completion of these tasks could lead not only to better predictions of transungual drug delivery, but also to better models of skin permeability, if hydrated nail plate can indeed serve as a model for the corneocyte phase of (partially hydrated) stratum corneum.

Ocular delivery of pRNA nanoparticles: distribution and clearance after subconjunctival injection.

PURPOSE: RNA nanoparticles derived from the three-way junction (3WJ) of the pRNA of bacteriophage phi29 DNA packaging motor were previously found to be thermodynamically stable. As the nanoparticles could have potential in ocular drug delivery, the objectives in the present study were to investigate the distribution of pRNA nanoparticles after subconjunctival injection and examine the feasibility to deliver the nanoparticles to the cells of cornea and retina. METHODS: Alexa647-labeled pRNA nanoparticles (pRNA-3WJ and pRNA-X) and double-stranded RNA (dsRNA) were administered via subconjunctival injection in mice. Alexa647 dye was a control. Topical administration was performed for comparison. Ocular clearance of pRNA nanoparticles and dsRNA after the injection was assessed using whole-body fluorescence imaging of the eyes. The numbers of cells in the ocular tissues with nanoparticle cell internalization were determined in fluorescence microscopy of dissected eye tissues. RESULTS: After subconjunctival injection, pRNA nanoparticles and dsRNA were observed to distribute into the eyes and cleared through the lymph. pRNA-3WJ, pRNA-X, and dsRNA were found in the cells of the conjunctiva, cornea, and sclera, but only pRNA-X was in the cells of the retina. Topical administration was not effective in delivering the nanoparticles to the eye. CONCLUSIONS: The pRNA nanoparticles were delivered to the cells in the eye via subconjunctival injection, and cell internalization was achieved in the cornea with pRNA-3WJ and pRNA-X and in the retina with pRNA-X. Only the X-shape pRNA-X could enter the retina.

Evaluation of intratympanic formulations for inner ear delivery: methodology and sustained release formulation testing.

A convenient and efficient in vitro diffusion cell method to evaluate formulations for inner ear delivery via the intratympanic route is currently not available. The existing in vitro diffusion cell systems commonly used to evaluate drug formulations do not resemble the physical dimensions of the middle ear and round window membrane. The objectives of this study were to examine a modified in vitro diffusion cell system of a small diffusion area for studying sustained release formulations in inner ear drug delivery and to identify a formulation for sustained drug delivery to the inner ear. Four formulations and a control were examined in this study using cidofovir as the model drug. Drug release from the formulations in the modified diffusion cell system was slower than that in the conventional diffusion cell system due to the decrease in the diffusion surface area of the modified diffusion cell system. The modified diffusion cell system was able to show different drug release behaviors among the formulations and allowed formulation evaluation better than the conventional diffusion cell system. Among the formulations investigated, poly(lactic-co-glycolic acid)-poly(ethylene glycol)-poly(lactic-co-glycolic acid) triblock copolymer systems provided the longest sustained drug delivery, probably due to their rigid gel structures and/or polymer-to-cidofovir interactions.

Silicone adhesive matrix of verapamil hydrochloride to provide pH-independent sustained release.

Providing pH-independent oral release of weakly basic drugs with conventional matrix tablets can be challenging because of the pH-dependent solubility characteristics of the drugs and the changing pH environment along the gastrointestinal tract. The aim of the present study was to use a hydrophobic polymer to overcome the issue of pH-dependent release of weakly basic model drug verapamil hydrochloride from matrix tablets without the use of organic buffers in the matrix formulations. Silicone pressure-sensitive adhesive (PSA) polymer was evaluated because of its unique properties of low surface energy, hydrophobicity, low glass transition temperature, high electrical resistance, and barrier to hydrogen ion diffusion. Drug release, hydrogen ion diffusion, tablet contact angle, and internal tablet microenvironment pH with matrix tablets prepared using PSA were compared with those using water-insoluble ethyl cellulose (EC). Silicone PSA films showed higher resistance to hydrogen ion diffusion compared with EC films. Verapamil hydrochloride tablets prepared using silicone PSA showed higher hydrophobicity and lower water uptake than EC tablets. Silicone PSA tablets also showed pH-independent release of verapamil and decreased in dimensions during drug dissolution. By contrast, verapamil hydrochloride tablets prepared using EC did not achieve pH-independent release.

Dose-dependent effect on skin permeation of polar and non-polar compounds.

The study of the relationship between the amount of drug applied to the skin and fraction of drug absorbed can improve our understanding of finite-dose percutaneous absorption in the development of topical products and risk assessment of hazardous chemical exposure. It has been previously shown that an increase in the dose applied to the skin leads to a decrease in the fraction of drug permeated the skin (dose-dependent effect). The objective of this research was to examine the dose-dependent effect using permeants of varying physiochemical properties. The dose-dependent effect was studied using human epidermal membrane under finite dose conditions in Franz diffusion cell with model permeants at doses ranging from 0.1 to 200 µg. The dose-dependent effect was evident with model permeants caffeine, corticosterone, dexamethasone, and estradiol, consistent with the relationship of decreasing fraction of dose permeated the skin at increasing the applied dose. However, no significant dose-dependent effect was observed for the polar model permeants urea, mannitol, tetraethyl ammonium, and ethylene glycol, suggesting different transport mechanisms for these permeants. It was also found that, at relatively high doses, estradiol, dexamethasone, and corticosterone could increase the permeation of polar and lipophilic permeants, which could counter the dose-dependent effect under the conditions studied.

Effect of Receptor Solution in Studies of In Vitro Permeation Test (IVPT).

In Vitro Permeation Test (IVPT) is commonly used to evaluate skin penetration of chemicals and performance of dermatological products. For a permeant with low aqueous solubility, an additive that is expected not to alter the skin barrier can be used in the receptor solution to improve permeant solubility. The objective of this study was to (a) evaluate the effects of these additives in IVPT receptor solution on skin permeability of model permeants and skin electrical resistance and (b) determine the solubility of the permeants in these receptor solutions. Bovine serum albumin (BSA), 2-hydroxypropyl-beta-cyclodextrin (HPCD), ethanol, nonionic surfactant Brij-98, and propylene glycol were the additives, and phosphate buffered saline (PBS) was the control. Steady-state skin permeability coefficients and resistances were determined. The receptor solutions examined in this study did not cause a significant increase in skin permeability or decrease in resistance (less than 40 % changes) except 25 % ethanol. The receptor solution containing 25 % ethanol induced an approximately twofold average increase in skin permeability and reduced skin electrical resistance by approximately threefold. The receptor solution of 2.5 % HPCD provided the highest levels of solubility for the model lipophilic permeants, while 0.2 % Brij-98 and 5 % ethanol showed the lowest solubility enhancement from those in PBS.

Posterior eye delivery of angiogenesis-inhibiting RNA nanoparticles via subconjunctival injection.

Neovascularization contributes to various posterior eye segment diseases such as age-related macular degeneration and diabetic retinopathy. RNA nanoparticles were demonstrated previously to enter the corneal and retinal cells after subconjunctival injection for ocular delivery. In the present study, antiangiogenic aptamers (anti-vascular endothelial growth factor (VEGF) and anti-angiopoietin-2 (Ang2) aptamers) were conjugated to RNA nanoparticles. The objectives were to investigate the clearance and distribution of these angiogenesis-inhibiting RNA nanoparticles after subconjunctival injection in vivo and their antiangiogenic effects for inhibiting ocular neovascularization in vitro. The results in the whole-body fluorescence imaging study showed that the clearance of RNA nanoparticles was size-dependent with no significant differences between RNA nanoparticles with and without the aptamers except for pRNA-3WJ. The distribution study of RNA nanoparticles by confocal microscopy of the dissected eye tissues in vivo indicated cell internalization of the larger RNA nanoparticles in the retina and retinal pigment epithelium after subconjunctival injection, and the larger nanoparticles with aptamers showed higher levels of cell internalization than those without. In the cell proliferation assay in vitro, RNA nanoparticles with multiple aptamers had higher antiangiogenic effects. With both longer retention time and high antiangiogenic effect, SQR-VEGF-Ang2 could be a promising RNA nanoparticle for posterior eye delivery.

Cracking the Code: Enhancing Molecular Tools for Progress in Nanobiotechnology.

Nature continually refines its processes for optimal efficiency, especially within biological systems. This article explores the collaborative efforts of researchers worldwide, aiming to mimic nature's efficiency by developing smarter and more effective nanoscale technologies and biomaterials. Recent advancements highlight progress and prospects in leveraging engineered nucleic acids and proteins for specific tasks, drawing inspiration from natural functions. The focus is developing improved methods for characterizing, understanding, and reprogramming these materials to perform user-defined functions, including personalized therapeutics, targeted drug delivery approaches, engineered scaffolds, and reconfigurable nanodevices. Contributions from academia, government agencies, biotech, and medical settings offer diverse perspectives, promising a comprehensive approach to broad nanobiotechnology objectives. Encompassing topics from mRNA vaccine design to programmable protein-based nanocomputing agents, this work provides insightful perspectives on the trajectory of nanobiotechnology toward a future of enhanced biomimicry and technological innovation.

Evaluation of skin permeation of ß-blockers for topical drug delivery.

PURPOSE: ß-Blockers have recently become the main form of treatment of infantile hemangiomas. Due to the potential systemic adverse effects of ß-blockers, topical skin treatment of the drugs is preferred. However, the effect and mechanism of dosage form pH upon skin permeation of these weak bases is not well understood. To develop an effective topical skin delivery system for the ß-blockers, the present study evaluated skin permeation of ß-blockers propranolol, betaxolol, timolol, and atenolol. METHODS: Experiments were performed in side-by-side diffusion cells with human epidermal membrane (HEM) in vitro to determine the effect of donor solution pH upon the permeation of the ß-blockers across HEM. RESULTS: The apparent permeability coefficients of HEM for the ß-blockers increased with their lipophilicity, suggesting the HEM lipoidal pathway as the main permeation mechanism of the ß-blockers. The pH in the donor solution was a major factor influencing HEM permeation for the ß-blockers with a 2- to 4-fold increase in the permeability coefficient per pH unit increase. This permeability versus pH relationship was found to deviate from theoretical predictions, possibly due to the effective stratum corneum pH being different from the pH in the donor solution. CONCLUSIONS: The present results suggest the possibility of topical treatment of hemangioma using ß-blockers.

Lateral Transport During Membrane Permeation in Diffusion Cell: In Silico Study on Edge Effect and Membrane Blocking.

Membrane transport in diffusion cell studies is not one-dimensional from the donor to the receptor. Lateral diffusion within the membrane into the surrounding clamped region can lead to edge effect. Lateral diffusion can also affect the impact of an object blocking the membrane in a diffusion cell. The effects of lateral transport on permeation across a two-layer membrane in diffusion cells were investigated in this study under edge effect and membrane blocking conditions that could be encountered in previous gingiva and hypothetical skin permeation studies. Model simulations of time-dependent and steady-state transport were performed using COMSOL Multiphysics. The simulations indicated edge effect could increase the steady-state flux across the membrane up to 35% with a relatively thick membrane and small diffusion cell opening (e.g., gingiva study). The edge effect decreased when the relative thickness and permeability of the major barrier (top layer in the two-layer membrane) decreased. When the membrane was partially blocked by an object, lateral diffusion within the membrane could mitigate its impact: e.g., when the object was in the receptor, the impact caused by membrane blocking was reduced more than half. Therefore, membrane lateral transport should be considered under certain circumstances in permeation studies using diffusion cells.

Characterization of Porcine Gingiva for Drug Absorption.

Gingiva or gum is a part of the periodontium that surrounds the tooth. Its main function is to provide an effective barrier to both mechanical trauma and bacterial invasion. Gingiva is the target site for some topical drugs. The most common disease in gingiva is periodontal diseases (gum infections). Understanding the gingiva barrier properties could provide insights into approaches to effective drug delivery for the gingiva. Porcine gingiva was chosen as the model in the present membrane transport study. The permeability coefficients of gingiva were determined using a modified Franz diffusion cell with small diffusional area (0.03 cm2) and 12 model permeants with different physicochemical properties. The influences of edge effect and aqueous boundary layers were not observed in the modified diffusion cell setup for the small pieces of gingiva tissue samples. Lipophilic permeants exhibit higher permeability coefficients than hydrophilic permeants. A correlation was observed between the Log permeability coefficient (Log P) and Log octanol-water distribution coefficient (Log Dow) in the analysis. The permeant molecular weight (MW) was also a factor in the Log P vs. Log Dow relationship. The coefficient of Log Dow in this three-factor relationship (0.42) suggested that the gingiva barrier was less lipophilic than octanol.

Permeability of Fresh and Frozen Porcine and Human Gingiva and the Effect of Storage Duration.

The gingiva is the target site for some topical drugs, but the permeability of human gingiva has not been systematically evaluated. Pigs are a common animal model for in vitro membrane transport studies. The objectives of this study were to: (a) determine the permeability coefficients of freshly excised human gingiva using model permeants, (b) compare the permeability coefficients of fresh human gingiva with those of fresh porcine gingiva, (c) evaluate the effect of freezing duration on the permeability of porcine gingiva, and (d) compare the permeability coefficients of fresh and cadaver (frozen) human gingiva. A goal was to examine the feasibility of using porcine gingiva as a surrogate for human gingiva. The potential of using frozen tissues in permeability studies of gingiva was also examined. Fresh and frozen porcine gingiva, fresh human gingiva, and frozen cadaver human gingiva were compared in the transport study with model polar and lipophilic permeants. The fresh porcine and human tissues showed similarities in the "permeability coefficient vs. octanol-water distribution coefficient" relationship. The porcine gingiva had a lower permeability than that of the human, with a moderate correlation between the permeability of the fresh porcine and fresh human tissues. The permeability of the porcine tissues for the model polar permeants increased significantly after the tissues were frozen in storage. Moreover, the frozen human cadaver tissue could not be utilized due to the high and indiscriminating permeability of the tissue for the permeants and large tissue sample-to-sample variabilities.