Glucose Sensing by Skeletal Myocytes Couples Nutrient Signaling to Systemic Homeostasis.

Skeletal muscle is a major site of postprandial glucose disposal. Inadequate insulin action in skeletal myocytes contributes to hyperglycemia in diabetes. Although glucose is known to stimulate insulin secretion by ß cells, whether it directly engages nutrient signaling pathways in skeletal muscle to maintain systemic glucose homeostasis remains largely unexplored. Here we identified the Baf60c-Deptor-AKT pathway as a target of muscle glucose sensing that augments insulin action in skeletal myocytes. Genetic activation of this pathway improved postprandial glucose disposal in mice, whereas its muscle-specific ablation impaired insulin action and led to postprandial glucose intolerance. Mechanistically, glucose triggers KATP channel-dependent calcium signaling, which promotes HDAC5 phosphorylation and nuclear exclusion, leading to Baf60c induction and insulin-independent AKT activation. This pathway is engaged by the anti-diabetic sulfonylurea drugs to exert their full glucose-lowering effects. These findings uncover an unexpected mechanism of glucose sensing in skeletal myocytes that contributes to homeostasis and therapeutic action.

Omeprazole taken once every other day can effectively prevent aspirin-induced gastrointestinal mucosal damage in rats.

BACKGROUND: Proton-pump inhibitors (PPIs) prevent aspirin-associated gastric and duodenal mucosal damage. However, long-term use of PPIs can lead to various adverse reactions, such as gastric polyps and enterochromaffin-like cell hyperplasia. Current research indicates that the abovementioned adverse reactions are mainly related to hypergastrinemia. We investigated whether low-frequency administration of omeprazole could effectively repair aspirin-induced mucosal damage and reduce the increase in gastrin levels associated with long-term use of PPIs. METHODS: Sprague‒Dawley rats were divided into four treatment groups: daily aspirin, daily aspirin and omeprazole once every day (qd), daily aspirin and omeprazole once every other day (qod), and daily aspirin and omeprazole once every three days (1/d3). After 15 days of feeding, blood samples were collected, and the stomachs of sacrificed rats were subjected to macroscopic, histological, and immunohistochemical studies. Moreover, in clinical practice, patients with peptic ulcers caused by aspirin took a standard dose of omeprazole (20 mg) every other day. Two months later, gastroscopy was performed to examine the healing of the ulcers. RESULTS: Both the omeprazole qd and omeprazole qod administrations effectively prevented aspirin-induced gastric peptic ulcers, with no significant difference between the two groups in the inhibition of parietal cell secretion of gastric acid and cell apoptosis. However, omeprazole 1/d3 failed to completely prevent aspirin-induced gastric mucosal injury. Notably, the gastrin levels, cell proliferation ability and cholecystokinin B receptor expression of the omeprazole qd group were significantly higher than those of the omeprazole qod group. In clinical work, patients with peptic ulcers caused by aspirin were given a standard dose of omeprazole every other day, and their ulcers healed after 2 months, as observed by gastroscopy. CONCLUSIONS: Omeprazole administration once every other day can effectively prevent aspirin-induced peptic ulcers and reduce hypergastrinemia, which may reduce the long-term adverse effects of PPI treatment.

A Fast-Charge Graphite Anode with a Li-Ion-Conductive, Electron/Solvent-Repelling Interface.

Graphite has been serving as the key anode material of rechargeable Li-ion batteries, yet is difficultly charged within a quarter hour while maintaining stable electrochemistry. In addition to a defective edge structure that prevents fast Li-ion entry, the high-rate performance of graphite could be hampered by co-intercalation and parasitic reduction of solvent molecules at anode/electrolyte interface. Conventional surface modification by pitch-derived carbon barely isolates the solvent and electrons, and usually lead to inadequate rate capability to meet practical fast-charge requirements. Here we show that, by applying a MoOx-MoNx layer onto graphite surface, the interface allows fast Li-ion diffusion yet blocks solvent access and electron leakage. By regulating interfacial mass and charge transfer, the modified graphite anode delivers a reversible capacity of 340.3 mAh g-1 after 4000 cycles at 6 C, showing promises in building 10-min-rechargeable batteries with a long operation life.

Key Roles of Interfacial OH- ion Distribution on Proton Coupled Electron Transfer Kinetics Toward Urea Oxidation Reaction.

Enhancing alkaline urea oxidation reaction (UOR) activity is essential to upgrade renewable electrolysis systems. As a core step of UOR, proton-coupled electron transfer (PCET) determines the overall performance, and accelerating its kinetic remains a challenge. In this work, a newly raised electrocatalyst of NiCoMoCuOx Hy with derived multi-metal co-doping (oxy)hydroxide species during electrochemical oxidation states is reported, which ensures considerable alkaline UOR activity (10/500 mA cm-2 at 1.32/1.52 V vs RHE, respectively). Impressively, comprehensive studies elucidate the correlation between the electrode-electrolyte interfacial microenvironment and the electrocatalytic urea oxidation behavior. Specifically, NiCoMoCuOx Hy featured with dendritic nanostructure creates a strengthened electric field distribution. This structural factor prompts the local OH- enrichment in electrical double layer (EDL), so that the dehydrogenative oxidation of the catalyst is directly reinforced to facilitate the subsequent PCET kinetics of nucleophilic urea, resulting in high UOR performance. In practical utilization, NiCoMoCuOx Hy -driven UOR coupled cathodic hydrogen evolution reaction (HER) and carbon dioxide reduction reaction (CO2 RR), and harvested high value-added products of H2 and C2 H4 , respectively. This work clarifies a novel mechanism to improve electrocatalytic UOR performance through structure-induced interfacial microenvironment modulation.

Assessing reliability and validity of the Chinese version of the Crown-Crisp Experience Index and its application in pneumoconiosis patients.

In China, among all patients with occupational diseases, 90% have pneumoconiosis. The disease, which leads to psychological problems, seriously affects patients' lives. The Crown-Crisp Experience Index (CCEI) is a multidimensional questionnaire to assess patients' psychological conditions. Yet there is no Chinese version of CCEI. This study, therefore, aims to develop a Chinese CCEI, in line with standard localization procedures, by translating, back-translating, and culturally adapting the original English version. The final Chinese version comprises 47 items in six dimensions. The reliability and validity of the Chinese CCEI were tested by analyzing the data collected from 1,000 pneumoconiosis patients from an occupational disease prevention and treatment hospital. A rank sum test was carried out to compare the phobic anxiety (PHO) between pneumoconiosis patients and retired miners. The results of exploratory factor analysis show six principal components, which explain a total of 78.246% variances. Confirmatory factor analysis shows that the Chi-square freedom ratio (χ2/df) were less than 3, the root mean square error approximation (RMSEA) were less than 0.05, comparative fit Index(CFI) and incremental fit index (IFI) were greater than 0.9, average variance extracted(AVE) in six dimensions were less than 0.5, residual variances(CR) were greater than 0.8, Cronbach's alpha coefficient 0.839, Omega ω coefficient 0.889, and S-CVI 0.88. The PHO of pneumoconiosis patients was significantly higher than that of retired miners exemplified by a statistical difference (P < 0.05). The study shows that the Chinese version of CCEI enjoys a high degree of reliability and validity and thus can be used as a screening tool for measuring patients' anxiety and fear levels.

The Adsorption Behaviors of CO and H2 to FeO onto CaO Surfaces: A Density Functional Theory Study.

The adsorption behaviors of CO and H2 to FeO onto CaO surfaces have been studied using the density functional theory (DFT) to determine the reactions of FeO by CO and H2. The adsorption mechanisms of FeO clusters on the CaO(100) and CaO(110) surfaces were calculated first. The structure of the Ca(110) surface renders it highly chemically reactive compared with the Ca(100) surface because of low coordination. After gas adsorption, CO bonds to the O atom of FeO, forming CO2 compounds in both configurations through the C atom. H2 favors the O atom of FeO, forming H2O compounds and breaking the Fe-O bond. Comparing the adsorption behavior of two reducing gases to FeO on the Ca surface, the reaction of the CO molecule being adsorbed to generate CO2 compounds is exothermic. The reaction of H2 molecule adsorption to generate H2O compounds is endothermic. This property is essential for the inertial-collision stage of the reduction. However, the dissociation of the CO2 compound from the reaction interface will overcome a high energy barrier and slow down the reduction. The H2O compound dissociates from the surface more easily, which can accelerate the reduction.

Urinary concentrations of metals before and after volcanic eruption: a natural experiment surrounding the eruption of Volcán de Fuego, 2018.

Volcanic eruptions increase environmental heavy metal concentrations, yet little research has been performed on their extrapulmonary human health effects. We fortuitously collected biological samples in a cohort of Guatemalan sugarcane cutters in the area surrounding Volcán de Fuego before and after the June 2018 eruption. We sought to determine whether stratovolcanic activity was associated with changes in urinary concentrations of heavy metals in a cohort of sugarcane workers. In this exploratory analysis, we found significant increases in urinary arsenic, (ß = 1.46, P < 0.0001), cadmium (ß = 1.03, P < 0.0001), and lead (ß = 0.87, P = 0.003) in participants with residential proximity to Volcán de Fuego as compared to participants farther away, suggesting that volcanic activity could be associated with acute heavy metal exposures. This natural experiment is, to our knowledge, the first of its kind and suggests a need for more research into heavy metal exposure-related health impacts of volcanic eruptions.

Reconstruction of Solid Electrolyte Interphase with SrI2 Reactivates Dead Li for Durable Anode-Free Li-Metal Batteries.

Without excess Li, anode-free Li-metal batteries (AFLMBs) have been proposed as the most likely solution to realizing highly-safe and cost-effective Li-metal batteries. Nevertheless, short cyclic life puzzles conventional AFLMBs due to anodic dead Li accumulation with a local current concentration induced by irreversible electrolyte depletion, insufficient active Li reservoir and slow Li+ transfer at the solid electrolyte interphase (SEI). Herein, SrI2 is introduced into carbon paper (CP) current collector to effectively suppress dead Li through synergistic mechanisms including reversible I- /I3 - redox reaction to reactivate dead Li, dielectric SEI surface with SrF2 and LiF to prevent electrolyte decomposition and highly ionic conductive (3.488 mS cm-1 ) inner layer of SEI with abundant LiI to enable efficient Li+ transfer inside. With the SrI2 -modified current collector, the NCM532/CP cell delivers unprecedented cyclic performances with a capacity of 129.2 mAh g-1 after 200 cycles.

Design and analysis of three-dimensional printing of a porous titanium scaffold.

OBJECTIVE: Mechanic strength, pore morphology and size are key factors for the three-dimensional (3D) printing of porous titanium scaffolds, therefore, developing optimal structure for the 3D printed titanium scaffold to fill bone defects in knee joints is instructive and important. METHODS: Structural models of titanium scaffolds with fifteen different pore unit were designed with 3D printing computer software; five different scaffold shapes were designed: imitation diamond-60°, imitation diamond-90°, imitation diamond-120°, regular tetrahedron and regular hexahedron. Each structural shape was evaluated with three pore sizes (400, 600 and 800 µm), and fifteen types of cylindrical models (size: 20 mm; height: 20 mm). Autodesk Inventor software was used to determine the strength and safety of the models by simulating simple strength acting on the knee joints. We analyzed the data and found suitable models for the design of 3D printing of porous titanium scaffolds. RESULTS: Fifteen different types of pore unit structural models were evaluated under positive pressure and lateral pressure; the compressive strength reduced when the pore size increased. Under torsional pressure, the strengths of the imitation diamond structure were similar when the pore size increased, and the strengths of the regular tetrahedron and regular hexahedron structures reduced when the pore size increased. In each case, the compressive strength of the regular hexahedron structure was highest, that of the regular tetrahedron was second highest, and that of the imitation diamond structure was relatively low. Fifteen types of cylindrical models under a set force were evaluated, and the sequence of comprehensive compressive strength, from strong to weak was: regular hexahedron > regular tetrahedron > imitation diamond-120° > imitation diamond-90° > imitation diamond-60°. The compressive strength of cylinder models was higher when the pore size was smaller. CONCLUSION: The pore size and pore morphology were important factors influencing the compressive strength. The strength of each structure reduced when the pore size (400, 600 and 800 µm) increased. The models of regular hexahedron, regular tetrahedron and imitation diamond-120°appeared to meet the conditions of large pore sizes and high compressive strength.

Pristimerin inhibits neuronal inflammation and protects cognitive function in mice with sepsis-induced brain injuries by regulating PI3K/Akt signalling.

CONTEXT: Sepsis is a systemic inflammatory disease; pristimerin exhibits strong antibacterial, anti-inflammatory and antioxidant properties. OBJECTIVES: We explored whether pristimerin protected against cognitive dysfunction and neuroinflammation in C57BL/6 J mice with sepsis-induced brain injuries. MATERIALS AND METHODS: Sepsis was induced by intraperitoneal administration of 2 mg/kg lipopolysaccharide (LPS). C57BL/6 J mice were separated into four groups (n = 10 per group): positive control, negative control, pristimerin 10 mg/kg and pristimerin 100 mg/kg. Pristimerin was administered orally for 28 days prior to LPS administration and for six days thereafter. Behavioural changes were assessed one day after LPS administration using the Morris water maze and via neurological dysfunction scoring. Molecular pathogenesis was explored by measurement of malondialdehyde, superoxide dismutase, reactive oxygen species and inflammatory cytokine levels in mouse brains. Neuronal apoptosis was evaluated using the TUNEL assay. The levels of p-Akt/Akt, p-PI3K/PI3K, mTOR, Bax, Bcl-2 and caspase-3 proteins were determined via Western blotting. RESULTS: Pristimerin improved cognitive function and reduces the neurological score to 1.15 ± 0.03. Pristimerin significantly reduced all cytokine levels: TNF-α by 18 ± 0.6 pg/mg, IL-1ß by 43 ± 1.3 pg/mg and IL-6 by 34 ± 1.12 pg/mg. There was significant (p < 0.01) improvement in PI3K/Akt signalling and histopathological changes in the brain tissue of sepsis induced brain injured rats. CONCLUSIONS: Pristimerin ameliorated neuronal injury by regulating PI3K/Akt signalling in mice with sepsis-induced brain injuries. Pristimerin may merit further development for clinical applications.

High magnesium prevents matrix vesicle-mediated mineralization in human bone marrow-derived mesenchymal stem cells via mitochondrial pathway and autophagy.

Magnesium, as a physiological calcium antagonist, plays a vital role in the bone metabolism and the balance between magnesium and calcium is crucial in bone physiology. We recently demonstrated that matrix mineralization in human bone marrow-derived mesenchymal stem cells (hBMSCs) can be suppressed by high Mg2+ . However, a complete understanding of the mechanisms involved still remains to be elucidated. As mitochondrial calcium phosphate granules depletion manifests concurrently with the appearance of matrix vesicles (MVs) and autophagy are associated with matrix mineralization, we studied the effect of high extracellular Mg2+ on these pathways. Our results first demonstrated that high Mg2+ has a significant inhibitory effect on the generalization of extracellular mineral aggregates and the expression of collagen 1 along which the mineral crystals grow. Transmission electron microscope results showed that less amount of MVs were observed inside hBMSCs treated with high Mg2+ and high Mg2+ inhibited the release of MVs. In addition, high Mg2+ significantly suppressed mitochondrial Ca2+ accumulation. Autophagy is promoted as a response to osteogenesis of hBMSCs. High Mg2+ inhibited the level of autophagy upon osteogenesis and autophagy inhibitor 3-MA significantly suppressed mineralization. Exogenous ATP can reverse the inhibitory effect of high Mg2+ by increasing the level of autophagy. Taken together, our results indicate that high Mg2+ may modulate MVs-mediated mineralization via suppressing mitochondrial Ca2+ intensity and regulates autophagy of hBMSCs upon osteogenesis, resulting in decreased extracellular mineralized matrix deposition. Our results contribute to the understanding of the role of magnesium homeostasis in osteoporosis and the design of magnesium alloys.

RNAi as a tool to control the sex ratio of mouse offspring by interrupting Zfx/Zfy genes in the testis.

The objective of this study was to explore a novel method to alter the sex-ratio balance of mouse offspring by silencing the paralogous genes Zfx/Zfy (Zinc finger X/Y-chromosomal transcription factor gene) during spermatogenesis. Four recombined vectors PRZ1, PRZ2, PRZ3, and PRZ4 (RNAi-Ready-pSIREN-RetroQ-ZsGreen) were constructed for interrupting the Zfx gene. Additionally, a recombined vector Psilencer/Zfy-shRNA was constructed for interrupting the Zfy gene. Male mice were randomly divided into 8 groups, with 20 animals per group. Five groups of mice were injected with PRZ1, PRZ2, PRZ3, PRZ4, and Psilencer/Zfy-shRNA vectors, respectively. The three control groups were injected with an equal volume of physiological saline, empty RNAi-Ready-pSIREN-RetroQ-ZsGreen vector, and empty Psilencer/Zfy-shRNA vector, respectively. All groups were injected every 7 days for a total of four injections. Fourteen days after the fourth injection, 10 male mice from each group were mated individually with 10 females. Testicular tissue of 10 male mice in each group was collected, and the expression level of Zfx/Zfy mRNA was determined by qRT-PCR. Results showed that, compared with the empty RNAi-Ready-pSIREN-RetroQ-ZsGreen vector and the physiological saline group, expression of Zfx mRNA decreased significantly after injection of PRZ1 (p < 0.01), PRZ3 (p < 0.01), and PRZ4 (p < 0.01), and 78.75 ± 7.50% of the offspring were male in PRZ4 group, significantly higher than the offspring derived from the empty RNAi-Ready-pSIREN-RetroQ-ZsGreen vector and physiological saline group (p < 0.01). In the PRZ1 group, the expression of Zfx mRNA was also significantly lower (p < 0.01), but the male rate of offspring was not different (p > 0.05). Conversely, the expression of Zfy mRNA decreased significantly after injection of Psilencer/Zfy-shRNA (p < 0.01) and 31.00 ± 11.00% of the offspring were male, significantly lower than in the physiological saline group (p < 0.01). In conclusion, our findings show that RNAi-mediated disruption of Zfx/Zfy in mouse testis affected X/Y spermatogenesis. Additionally, results suggest that the paralogous genes Zfx/Zfy play an important role in the process of X and Y sperm development. The individual interference of Zfx/Zfy may predict the outcome of X and Y haploid sperms. Presented herein is an advanced method developed to control mouse X/Y spermatogenesis and sex ratio of offspring.

What Do Colorado Adults Know About Legal Use of Recreational Marijuana After a Media Campaign?

BACKGROUND: Colorado is among the first states to legalize the recreational sale of marijuana and therefore among the first to develop regulations outlining the purchase, possession, consumption, and enforcement, and penalties. Colorado legislators set aside funds for a statewide informational media campaign to educate Colorado residents on legal use of marijuana. METHOD: This study evaluated the effectiveness of the mass media campaign to increase awareness of the law through a prospective cohort surveyed before and 6 months after the launch of the campaign ( n = 798). RESULTS: A total of 28.0% reported recall of the Good to Know campaign. There was a significant positive change in accurate knowledge of marijuana laws from baseline to follow-up for each of the four primary indicators of knowledge of the marijuana laws. Among those who had inaccurate knowledge of the laws at baseline, those who reported seeing the campaign at least once or more were 2.53 (95% confidence interval = 1.29-4.95) times as likely to report accurate knowledge of the laws at follow-up compared with those who did not recall seeing the campaign, particularly among marijuana users. CONCLUSIONS: Those individuals who reported recall of the campaign were more likely to increase their accurate knowledge of marijuana laws.

Magnesium inhibits the calcification of the extracellular matrix in tendon-derived stem cells via the ATP-P2R and mitochondrial pathways.

Tendon calcification has been widely regarded by researchers to result from the osteogenic differentiation of Tendon-Derived Stem Cells (TDSCs) and ectopic mineralization caused by the calcification of cellular matrix. Recent studies have revealed a correlation between the Mg(2+)/Ca(2+) balance and the degeneration or calcification of tendon tissues. Furthermore, the ATP-P2X/P2Y receptor pathway has been shown to play a decisive role in the process of calcification, with calcium exportation from mitochondria and calcium oscillations potentially representing the cohesive signal produced by this pathway. Our previous study demonstrated that matrix calcification is inhibited by magnesium. In this study, we examined the effects of extracellular Mg(2+) on the deposition of calcium phosphate matrix and cellular pathways in TDSCs. The suppression of the export of calcium from mitochondria has also been detected. We found that a high concentration of extracellular Mg(2+) ([Mg(2+)]e) inhibited the mineralization of the extracellular matrix in TDSCs and that 100 µM ATP reversed this inhibitory effect in vitro. In addition, the spontaneous release of ATP was inhibited by high [Mg(2+)]e levels. A high [Mg(2+)]e suppressed the expression of P2X4, P2X5 and P2X7 and activated the expression of P2Y1, P2Y2, P2Y4 and P2Y14. The interaction between Mg(2+) and Ca(2+) is therefore contradictory, Mg(2+) inhibits mitochondrial calcium concentrations, meanwhile it reverses the opening of mPTP that is induced by Ca(2+). JC-1 staining verified the protective effect of Mg(2+) on mitochondrial membrane potential and the decrease induced by Ca(2+). Taken together, these results indicate that high [Mg(2+)]e interferes with the expression of P2 receptors, resulting in decreased extracellular mineralization. The balance between Mg(2+) and Ca(2+) influences mitochondrial calcium exportation and provides another explanation for the mechanism underlying matrix calcification in TDSCs.

Mild Hypothermia Protects Pigs' Gastric Mucosa After Cardiopulmonary Resuscitation via Inhibiting Interleukin 6 (IL-6) Production.

BACKGROUND The purpose of this study was to determine the effect of mild hypothermia therapy on gastric mucosa after cardiopulmonary resuscitation (CPR) and the underlying mechanism. MATERIAL AND METHODS Ventricular fibrillation was induced in pigs. After CPR, the surviving pigs were divided into mild hypothermia-treated and control groups. The changes in vital signs and hemodynamic parameters were monitored before cardiac arrest and at intervals of 0.5, 1, 2, 4, 6, 12, and 24 h after restoration of spontaneous circulation. Serum IL-6 was determined at the same time, and gastroscopy was performed. The pathologic changes were noted, and the expression of IL-6 was determined by hematoxylin and eosin (HE) staining and immunohistochemistry under light. RESULTS The heart rate, mean arterial blood pressure, and cardiac output in both groups did not differ significantly. The gastric mucosa ulcer index evaluated by gastroscopy 2 h and 24 h after restoration of spontaneous circulation (ROSC) in the mild hypothermic group was lower than that the control group (P<0.05). The inflammatory pathologic score of gastric mucosa in the mild hypothermic group 6-24 h after ROSC was lower than that in the control group (P<0.05). Serum and gastric mucosa IL-6 expression 0.5-4 h and 6, 12, and 24 h after ROSC was lower in the mild hypothermic group than in the control group (P<0.05). CONCLUSIONS Mild hypothermia treatment protects gastric mucosa after ROSC via inhibiting IL-6 production and relieving the inflammatory reaction.

Improved Bending Strength and Thermal Conductivity of Diamond/Al Composites with Ti Coating Fabricated by Liquid-Solid Separation Method.

In response to the rapid development of high-performance electronic devices, diamond/Al composites with high thermal conductivity (TC) have been considered as the latest generation of thermal management materials. This study involved the fabrication of diamond/Al composites reinforced with Ti-coated diamond particles using a liquid-solid separation (LSS) method. The interfacial characteristics of composites both without and with Ti coatings were evaluated using SEM, XRD, and EMPA. The results show that the LSS technology can fabricate diamond/Al composites without Al4C3, hence guaranteeing excellent mechanical and thermophysical properties. The higher TC of the diamond/Al composite with a Ti coating was attributed to the favorable metallurgical bonding interface compounds. Due to the non-wettability between diamond and Al, the TC of uncoated diamond particle-reinforced composites was only 149 W/m·K. The TC of Ti-coated composites increased by 85.9% to 277 W/m·K. A simultaneous comparison and analysis were performed on the features of composites reinforced by Ti and Cr coatings. The results suggest that the application of the Ti coating increases the bending strength of the composite, while the Cr coating enhances the TC of the composite. We calculate the theoretical TC of the diamond/Al composite by using the differential effective medium (DEM) and Maxwell prediction model and analyze the effect of Ti coating on the TC of the composite.

A carboxylate linker strategy mediated densely accessible Fe-N4 sites for enhancing oxygen electroreduction in Zn-air batteries.

Iron-nitrogen-carbon single-atom catalysts derived from zeolitic-imidazolate-framework-8 (ZIF-8) have presented its great potential for the oxygen reduction reaction (ORR) in Zn-air batteries (ZABs). However, due to insufficient active Fe-N sites, its ORR activity is inferior to Pt-based catalysts. Herein, a carboxylate (OAc) linker strategy is proposed to design a ZIF-8-derived FeNCOAc catalyst with abundant accessible Fe-N4 single-atom sites. Except that imidazole groups can coordinate with Fe ions, the OAc linker on the unsaturated coordination Zn nodes can anchor and coordinate with more Fe ions, resulting in a significant increase in Fe-N4 site density. Meanwhile, the corrosion of carbon skeleton by OAc oxidation during heat-treatment leads to improved porosity of catalyst. Benefitting from the highly dense Fe-N4 sites and hierarchical pores, the FeNCOAc endows superior performance in alkaline medium (E1/2 = 0.906 V), which is confirmed by density functional theory calculation results. Meanwhile, the assembled liquid ZAB delivers a favorable peak power density of 173.9 mW cm-2, and a high specific capacity of 770.9 mAh g-1 as well as outstanding durability. Besides, the solid-state ZAB also shows outstanding discharge performance.

Biomimetic short fiber reinforced 3-dimensional scaffold for bone tissue regeneration.

Bone defects caused by diseases and trauma are considered serious clinical challenges. Autologous and allogeneic transplantations are the most widely used methods to mitigate bone defects. However, transplantation poses risks such as secondary trauma, immune rejection, and disease transmission to patients. Preparing a biologically active bone tissue engineering scaffold as a bone substitute can overcome this problem. In the current study, a PLGA/gelatin (Gel) short fiber-reinforced composite three-dimensional (3D) scaffold was fabricated by electrospinning for bone tissue defect repair. A hybrid scaffold adding inorganic materials hydrotalcite (CaAl-LDH) and osteogenic factors deferoxamine (DFO) based on PLGA and Gel composite filaments was prepared. The structure, swelling, drug release, and compressive resilience performance of the 3D scaffolds in a wet state were characterized and the osteogenic effect of the crosslinked scaffold (C-DLPG) was also investigated. The scaffold has shown the optimum physicochemical attributes which still has 380 kPa stress after a 60% compression cycle and sustainedly released the drug for about twenty days. Moreover, a promisingIn vivoosteogenic performance was noted with better tissue organization. At 8 weeks after implantation, the C-DLPG scaffold could fill the bone defect site, and the new bone area reached 19 mm2. The 3D microfiber scaffold, in this study, is expected to be a promising candidate for the treatment of bone defects in the future.

High selective electrocatalytic reduction of carbon dioxide to ethylene enabled by regulating the microenvironment over Cu-Ag nanowires.

Copper-based tandem catalysts are effective candidates for yielding multi-carbon (C2+) products in electrochemical reduction of carbon dioxide (CO2RR). However, these catalysts still face a significant challenge regarding in the low selectivity for the production of a specific product. In this study, we report a high selectivity of 77.8 %±2 % at -1.0 V (vs RHE) for the production of C2H4 by using a Cu88Ag12NW catalyst which is primarily prepared through a combined Cu-Ag co-deposition and wet chemical method, employing an attractive strategy focused on regulating the microenvironment over Cu-Ag nanowires. The experimental and computational studies show that the higher *CO coverage and lower intermediate adsorption energy are important reasons for achieving the high C2H4 selectivity of Cu88Ag12NW catalyst. Comsol simulation results indicate that dense nanowires exhibit a nano-limiting effect on OH- ions, thereby leading to an increase in local pH and promoting coupling reactions. The catalyst demonstrates no noticeable decrease in current density or selectivity even after 12 h of continuous operation. The Cu-Ag nanowire composite exhibits remarkable catalytic activity, superior faradaic efficiency, excellent stability, and easy synthesis, which highlights its significant potential for electro-reducing carbon dioxide into valuable products.

All-Fluorinated Electrolyte Engineering Enables Practical Wide-Temperature-Range Lithium Metal Batteries.

The development of lithium metal batteries (LMBs) is severely hindered owing to the limited temperature window of the electrolyte, which renders uncontrolled side reactions, unstable electrolyte/electrode interface (EEI) formation, and sluggish desolvation kinetics for wide temperature operation condition. Herein, we developed an all-fluorinated electrolyte composed of lithium bis(trifluoromethane sulfonyl)imide, hexafluorobenzene (HFB), and fluoroethylene carbonate, which effectively regulates solvation structure toward a wide temperature of 160 °C (-50 to 110 °C). The introduction of thermostable HFB induces the generation of EEI with a high LiF ratio of 93%, which results in an inhibited side reaction and gas generation on EEI and enhanced interfacial ion transfer at extreme temperatures. Therefore, an unparalleled capacity retention of 88.3% after 400 cycles at 90 °C and an improved cycling performance at -50 °C can be achieved. Meanwhile, the practical 1.3 Ah-level pouch cell delivers high energy density of 307.13 Wh kg-1 at 60 °C and 277.99 Wh kg-1 at -30 °C after 50 cycles under lean E/C ratio of 2.7 g/Ah and low N/P ratio of 1.2. This work not only offers a viable strategy for wide-temperature-range electrolyte design but also promotes the practicalization of LMBs.