RESUMO
Many research efforts have focused on designing new inorganic phosphors to meet different application requirements. The structure-photoluminescence relationship between activator ions and the matrix lattice plays an irreparable role in designing target phosphors. Herein, a series of ABP2O7:Mn2+ (A = Ba/Sr; B = Mg/Zn) phosphors are prepared for a detailed study on the relationship between the luminescence performance and spatial structure and symmetry of the doping site of Mn2+. Due to the weak interaction between nearest B-B pairs, [BO5] is defined as an isolated coordination polyhedron whose structure and symmetry directly influence the photoluminescence of Mn2+. The emission wavelength of Mn2+ is â¼620 nm when it occupies the triangular bipyramid [MgO5] in BaMgP2O7. When Mn2+ occupies the quadrangular pyramid-typed [MgO5] or [ZnO5] in SrMgP2O7, SrZnP2O7, and BaZnP2O7, the emission wavelengths peak at â¼670 nm. We propose a conception of isolated coordination polyhedral confinement to clarify the luminescence performance of Mn2+ in the fivefold coordination configuration with different geometries, which has great theoretical research significance for designing inorganic phosphors.
RESUMO
Broadband ultraviolet (UV) excitation and red/far-red emission phosphors can effectively convert solar spectrum to enhance photosynthesis and promote morphogenesis in plants. Based on the above application requirements, Eu3+ single-doped LaAl1-yGayO3 solid solutions and Eu3+,Mn4+ codoped LaAl0.7Ga0.3O3 phosphors were designed and synthesized in this work. The LaAl0.7Ga0.3O3:0.05Eu3+ (LAG:Eu3+) phosphor exhibits a strong charge transfer band (CTB) excitation and characteristic 5D0 â 7F2 transition red emission (619 nm), which is very similar to the luminescence properties of Eu3+-organic ligand compound (EuL3). Rietveld refinement studies further revealed that the cation substitution disturbs the site symmetry. The optimal Eu3+, Mn4+ co-doped LaAl0.7Ga0.3O3 (LAG:Eu,Mn) phosphor possesses a dual-band excitation spectrum in broadband ultraviolet (UVA, UVB) area and a dual-band emission spectrum within red/far-red area. Under the sunlight radiation, the real-time spectrum of luminous laminated glasses fabricated by coating the LAG:Eu,Mn phosphor shows the percentage of radiant intensity in the red/far-red region significantly increases, suggesting that the phosphor can be a promising candidate for solar spectral conversion in plant cultivation. We believe this work provides a new idea for developing novel broadband ultraviolet excitation and red/far-red emission phosphors.
RESUMO
All-inorganic perovskite quantum dots (PQDs, CsPbX3, X = Cl, Br, and I) show outstanding application prospects in the field of photoelectric devices. In recent years, the development of PQDs has greatly improved their stability to water, oxygen, and light. However, thermal quenching of PQDs greatly limits their practical application. Herein, we embed PQDs into ATiO3 (A = Ca, Ba, and Sr) of three different mesoporous spherical structures to explore the effect on thermal quenching of PQDs. Because of the unique mesoporous hollow microsphere structure and low thermal conductivity of SrTiO3, it can effectively block the heat transfer and improve the thermal quenching of PQDs. The photoluminescence (PL) intensity of CsPbBr3@SrTiO3 composites is 72.6% of the initial intensity after heating to 120 °C. Moreover, the PL intensity of CsPbBr3@SrTiO3 composites remains about 80% of the initial value even when stored in air for 20 days or irradiated by 365 nm UV light for 48 h. A neutral white light-emitting diode is assembled by a blue chip, CsPbBr3@SrTiO3 composites, and red phosphor of K2SiF6:Mn4+, which has a color temperature of 5389 K and a color gamut covered 133% of National Television Standards Committee (NTSC).
Assuntos
Pontos Quânticos , Calefação , Temperatura Alta , Oxigênio , TemperaturaRESUMO
The tetravalent-state stability of manganese is of primary importance for Mn4+ luminescence. Double perovskite-structured A2B'Bâ³O6:Mn4+ has been recently prevalent, and the manganese ions are assumed to substitute for the Bâ³(IV-VI)O6 site to stabilize at the tetravalent charge state to generate far-red emissions. However, some Mn-doped A2B'Bâ³O6-type materials show no or weak luminescence such as typical Ca2MgWO6:Mn. In this work, a cation-pair co-substitution strategy is proposed to replace 2Ca2+ by Na+-La3+ to form Ca2-2xNaxLaxMgWO6:Mn. The significant structural distortion appears in the solid solution lattices with the contraction of [MgO6] but enlargement of [WO6] octahedron. We hypothesize that the site occupancy preference of Mn migrates from Mg2+ to W6+ sites. As a result, the effective Mn4+/Mn2+ concentration enhances remarkably to regulate nonluminescence to highly efficient Mn4+-related far-red emission. The optimal CaNa0.5La0.5MgWO6:0.9%Mn4+ shows an internal quantum efficiency of 94% and external quantum efficiency of 82%, reaching up to the top values in Mn4+-doped oxide phosphors. This work may provide a new perspective for the rational design of Mn4+-activated red phosphors, primarily considering the site occupancy modification and tetravalent-state stability of Mn.
RESUMO
Phosphors with high quantum efficiency and thermal stability play a key role in improving the performance of phosphor-converted white light-emitting diodes (pc-WLEDs). A near-UV-pumped LED shows a great advantage due to its reduction of the negative effect of blue light on human health. In this work, we propose a series of near-UV excitable cyan-emitting Eu2+-activated phosphors with a nominal composition of Na2-2xAl11O17+a:xEu2+ (x = 0.01-0.40), which crystallize in a sodium ß-alumina phase with a composition close to Na1.22Al11O17.11. An excess amount of the sodium carbonate raw material makes up the volatile Na during the high-temperature process. The noninteger stoichiometric composition promotes the rigidity of the crystal structure with a slight excess of Na insertion into layers between spinel blocks of the NaAl11O17 matrix. The nonequivalent substitution of Na+ by Eu2+ generates intrinsic defects acting as carrier traps. As a result, the phosphor with an optimal nominal composition Na1.6Al11O17+a:0.20Eu2+, under the excitation at 365 nm, shows an asymmetric cyan emission band at 468 nm with internal and external quantum efficiencies of 81.3 and 56.9%, respectively. Remarkably, the phosphor exhibits antithermal quenching within 200 °C. A pc-WLED with a high color rendering index (87.2) suggests great potential of the phosphor in pc-WLEDs. Therefore, a combination of a rigid structure and deep trap level is an effective way in exploring new phosphors with high quantum efficiency and thermal stability.
RESUMO
Photoluminescence quantum efficiency (QE) and thermal stability are important for phosphors used in phosphor-converted light-emitting diodes (pc-LEDs). Hydroxyapatite, Ca5(PO4)3OH, is generally not used as host for phosphors, because the OH- group in the host will lead to a high vibrational frequency around the activators and reduces the luminescent efficiency or even quenches the emission. In this work, strong blue emission at 450 nm appears after introducing boron atoms into Ce3+-doped hydroxyapatite under excitation of a UV light. Analyses suggest that B atoms enter into the host structure, which lead to the modification of crystal structure and the formation of vacancies of O and H to compensate charge mismatch. The decrease of OH- groups around Ce3+ ion on Ca (3) site is responsible for the appearance of strong blue emission. The absolute QE value of the best blue-emitting phosphor is â¼92%, and the emission intensity at 150 °C remains 81% of that at room temperature. The emission peak and International Commission on Illumination (CIE) coordinates hardly change upon increasing temperature. The results suggest that boron-modified hydroxyapatite phosphor could be a candidate for UV-LED-pumped white phosphor-converted LEDs. This strategy may provide a new insight into the exploration of phosphors' hosts and other functional materials.
RESUMO
Intrinsic defect-related luminescence has recently been attracting more research interest for the modification of phosphors. However, the connection between defect formation and crystal structure has never been considered. In this work, we report that in the absence of an impurity activator, under a reducing atmosphere, apatite-type compound M5(PO4)3X (M = Ca, Sr, or Ba; X = F, Cl, or Br) can emit tunable colors ranging from blue to orange depending on the content of M and X. To better understand the cause, Ba5- mSr m(PO4)3Br (BSPOB; m = 0-5) solid solutions were analyzed in detail. The dependency of self-activated luminescence on atmospheric conditions and solid solution compositions was investigated by combining experimental characterizations and theoretical calculations using density functional theory. Crystal structures of these solid solutions were verified by X-ray diffraction patterns as well as Rietveld refinements. With the defect formation energy and electron paramagnetic resonance measurement, we propose that an oxygen vacancy (VO) should be mainly responsible for the peculiar super wide band emission. Moreover, the enhanced distortion of solid solution crystal structures augments VO concentrations and leads to luminescence intensities in solid solutions that are higher than that in end point compounds. Variations of the electronic structure of BSPOB matrices with gradual tuning of the Sr/Ba ratio were also investigated. As a result, the introduction of VO defect levels within the band gap leads to the formation of donors and acceptors, allowing for a modulation of the photoluminescence throughout the visible part of the spectrum. As the first report in the literature to demonstrate fine-tunable emissions over a wide wavelength range as a consequence of native defective levels in a series of continuous apatite-type solid solutions, our results illustrate the feasibility of defect-meditated systems by carefully tailoring defect chemistry and nonstoichiometric chemical composition under controlled conditions to engineer phosphor properties.
RESUMO
Eu2+-activated Ba2ZnS3 has been reported as a red phosphor with a broad emission band peaking at 650 nm under blue excitation for white-LED. In this study, Ba2ZnS3:Eu2+, X- (X = F, Cl, Br, I) phosphors doped with halide ions were prepared by traditional high-temperature solid-state reaction. Phase identification of powders was performed by X-ray powder diffraction analysis, confirming the existence of single-phase Ba2ZnS3 crystals without dopant. The corresponding excitation spectra showed an additional broad band in the green region peaking at 550 nm when the phosphor was halogenated except by the smallest F-. It was proved that the green-excitation efficiency successively strengthened from Cl-, to Br-, to I-, which suggested larger halide ions made a greater contribution to the further splitting of the t2g energy level of the doped Eu2+ ions in the host Ba2ZnS3, and the optimized formula Ba1.995ZnS2.82:Eu2+0.005, I-0.18 showed a potential application in solar spectral conversion for agricultural greenhouse and solar cell. Defect chemistry theory and crystal field theory provided insights into the key role of halide ions in enhancing green-excitation efficiency.
RESUMO
A series of color-tunable Ce3+ single-doped and Ce3+, Mn2+ codoped Ca2.5Sr0.5Al2O6 phosphors were synthesized by a high-temperature solid-state reaction. The crystal structure, luminescent properties, and energy transfer were studied. For Ca2.5Sr0.5Al2O6:Ce3+ phosphors obtained with Al(OH)3 as the raw material, three emission profiles were observed. The peak of photoluminescence (PL) spectra excited at â¼360 nm shifts from 470 to 420 nm, while that of the PL spectra excited at 305 nm stays unchanged at 470 nm with the increase of Ce3+ content. Furthermore, the peak of PL spectra is situated at 500 nm under excitation at â¼400 nm. The relationship between the luminescent properties and crystal structure was studied in detail. Ce3+, Mn2+ codoped Ca2.5Sr0.5Al2O6 phosphors also showed interesting luminescent properties when focused on the PL spectra excited at 365 nm. Obvious different decreasing trends of blue and cyan emission components were observed in Ca2.5Sr0.5Al2O6:0.11Ce3+,xMn2+ phosphors with the increase in Mn2+ content, suggesting different energy transfer efficiencies from blue- and cyan-emitting Ce3+ to Mn2+. Phosphors with high color-rendering index (CRI) values are realized by adjusting the doping content of both Ce3+ and Mn2+. Studies suggest that the Ca2.5Sr0.5Al2O6:Ce3+,Mn2+ phosphor is a promising candidate for near UV-excited w-LEDs.
RESUMO
The red-emitting phosphor Ca0.8 Zn0.2 TiO3 :Pr3+ was synthesized using an ethylene glycol (EG)-assisted hydrothermal method. The effects of additional amounts of and order of adding EG, plus hydrothermal temperature, time, and pH on the composition, morphology and optical properties of the titanate phosphors were studied. The crystalline phases of the titanate phosphors were confirmed to be constituted of a series of co-existing CaTiO3 , Zn2 TiO4 and Ca2 Zn4 Ti16 O38 compounds in various proportions that were visualized using an X-ray diffractometer (XRD). The optical properties of the phosphors were studied using photoluminescence spectra and UV-visible spectroscopy. The results show that the impurities Zn2 TiO4 :Pr3+ and Ca2 Zn4 Ti16 O38 :Pr3+ significantly contributed to the enhancement of an absorption band around 380 nm. The optimum Ca0.8 Zn0.2 TiO3 :Pr3+ phosphor consisting of appropriate amounts of CaTiO3 , Ca2 Zn4 Ti16 O38 and Zn2 TiO4 in three phases was achieved by controlling the hydrothermal conditions, and the obtained red phosphor exhibited the highest red emission (1 D2 â 3 H4 transition of Pr3+ ) with an ideal chromaticity coordinate located at (x = 0.667, y = 0.332) under 380 nm excitation.
Assuntos
Európio/química , Substâncias Luminescentes/química , Praseodímio/química , Titânio/química , Zinco/química , Luminescência , Substâncias Luminescentes/síntese química , Medições Luminescentes , TemperaturaRESUMO
In this work, we report a simple yet robust strategy for eliminating surface defects in red-emitting fluorides through solid-liquid interface friction under elevated temperature and high pressure. This method is minimally dependent on the solvent type and especially excels at stripping away the abundant surface defects caused by mechanical crushing.
RESUMO
Although the acidic oxygen evolution reaction (OER) plays a crucial role in proton-exchange membrane water electrolysis (PEMWE) devices, challenges remain owing to the lack of efficient and acid-stable electrocatalysts. Herein, we present a low-iridium electrocatalyst in which tensile-strained iridium atoms are localized at manganese-oxide surface cation sites (TS-Ir/MnO2) for high and sustainable OER activity. In situ synchrotron characterizations reveal that the TS-Ir/MnO2 can trigger a continuous localized lattice oxygen-mediated (L-LOM) mechanism. In particular, the L-LOM process could substantially boost the adsorption and transformation of H2O molecules over the oxygen vacancies around the tensile-strained Ir sites and prevent further loss of lattice oxygen atoms in the inner MnO2 bulk to optimize the structural integrity of the catalyst. Importantly, the resultant PEMWE device fabricated using TS-Ir/MnO2 delivers a current density of 500 mA cm-2 and operates stably for 200 h.
RESUMO
Mixed-valence Eu2+/3+-activated phosphors have attracted wide attention due to their excellent luminescence tunability. Steady control of the Eu2+/Eu3+ ratio is the key to achieving reproducible Eu2+/3+ co-doped materials. In this work, BaMgP2O7:xEu2+/3+ (BMPO:Eu, x = 0.001-0.20) was successfully prepared by the traditional solid-state method in air. Eu3+ undergoes selective self-reduction at Ba2+ sites surrounded by a [P2O7] framework, leading to quantitive Eu2+/Eu3+. The phosphors exhibit a blue-violet emission band at â¼410 nm due to 5d-4f transitions of Eu2+ and a group of red emission peaks from 5D0-7FJ of Eu3+. Controllable multicolor emissions are realized by regulating the Eu content and excitations. A linear response of overall luminescence intensity to irradiation dose makes the phosphor appropriate for X-ray detection. The combination of UV-blue excitation-dependent color evolution and X-ray luminescence qualifies the phosphors with great potential for multi-level anti-counterfeiting. In addition, Eu3+ presents abnormal anti-thermal quenching, so that the fluorescence intensity ratio (FIR) of Eu2+/Eu3+ changes in the temperature range of 300-520 K, suggesting a promising application in optical thermometry. Therefore, selectively partial self-reduction in a multi-cationic host is an effective strategy to design mixed-valence co-doped materials, providing a multiplicity of applications.
RESUMO
Eu2+,Pb2+-doped core-shell-structured CaS@CaZnOS phosphors were synthesized by a two-step high-temperature solid-phase method. The as-synthesized CaS:Eu2+,Pb2+@CaZnOS:Pb2+ phosphors possess excellent dual-excitation and dual-emission (DE2) luminescent properties, which give rise to red emission peaking at 650 nm under green excitation, derived from the core CaS:Eu2+,Pb2+, and blue emission peaking at 424 nm, originating from the shell CaZnOS:Pb2+, under ultraviolet (UV) excitation. In addition, tunable red/blue emission can be achieved by changing the doping concentration of Pb2+ in the CaZnOS shell. The red/blue dual emission of core-shell DE2 phosphors under excitation of UV and green light significantly matches with the absorption spectrum of chlorophyll (a, b); hence, the as-prepared phosphors are excellent solar spectral conversion (SSC) auxiliaries of plastic films or laminated glass for greenhouses and provide ideas for creating more efficient and practically valuable SSC auxiliaries. The DE2 properties are described, and the energy transfer mechanism from Pb2+ to Eu2+ in the core is proposed and discussed in detail.
Assuntos
Materiais Biocompatíveis/química , Cálcio/química , Transferência de Energia , Európio/química , Chumbo/química , Medições Luminescentes , Teste de Materiais , Oxigênio/química , Tamanho da Partícula , Processos Fotoquímicos , Enxofre/química , Zinco/químicaRESUMO
In this study, we used HF (as good solvent) to dissolve K2GeF6 and K2MnF6 and added ethanol (as poor solvent) to cause ultrafast self-crystallization of K2GeF6:Mn4+ crystals, which had an unprecedentedly high external quantum efficiency that reached 73%. By using the red phosphor, we achieved a high-quality warm white light-emitting diode with color-rendering index of Ra = 94, R9 = 95, luminous efficacy of 150 lm W-1, and correlated color temperature at 3652 K. Furthermore, the good-poor solvent strategy can be used to fast synthesize other fluorides.
RESUMO
Photoluminescence quantum efficiency (QE) and thermal stability are important for phosphors used in phosphor-converted light-emitting diodes (pc-LEDs). Li4Sr1+xCa0.97-x(SiO4)2:0.03Ce3+ (-0.7 ≤ x ≤ 1.0) phosphors were designed from the initial model of Li4SrCa(SiO4)2:Ce3+, and their single-phased crystal structures were found to be located in the composition range of -0.4 ≤ x ≤ 0.7. Depending on the substitution of Sr2+ for Ca2+ ions, the absolute QE value of blue-emitting composition-optimized Li4Sr1.4Ca0.57(SiO4)2:0.03Ce3+ reaches â¼94%, and the emission intensity at 200 °C remains 95% of that at room temperature. Rietveld refinements and Raman spectral analyses suggest the increase of crystal rigidity, increase of force constant in CeO6, and decrease of vibrational frequency by increasing Sr2+ content, which are responsible for the enhanced quantum efficiency and thermal stability. The present study points to a new strategy for future development of the pc-LEDs phosphors based on local structures correlation via composition screening.
RESUMO
Ce(3+)/Eu(2+), Tb(3+) and Mn(2+) co-doping in single-phase hosts is a common strategy to achieve white-light phosphors via energy transfer, which provides a high color rendering index (CRI) value and good color stability. However, not all hosts are suitable for white-light phosphors due to inefficient energy transfer. In this study, the site-sensitive energy transfer from different crystallographic sites of Ce(3+) to Tb(3+)/Mn(2+) in Ca3Al2O6 has been investigated in detail. The energy transfer from purplish-blue Ce(3+) to Tb(3+) is an electric dipole-dipole mode, and the calculated critical distance (Rc) suggests the existence of purplish-blue Ce(3+)-Tb(3+) clusters. No energy transfer is observed from purplish-blue Ce(3+) to Mn(2+). In co-doped phosphors based on greenish-blue Ce(3+), however, the radiative mode dominates the energy transfer from Ce(3+) to Tb(3+), and an electric dipole-quadrupole interaction is responsible for the energy transfer from Ce(3+) to Mn(2+). A detailed discussion on the site-sensitive energy transfer modes might provide a new aspect to discuss and understand the possibilities and mechanisms of energy transfer, according to certain crystallographic sites in a complex host with different cation sites, as well as provide a possible approach in searching for single-phase white-light-emitting phosphors.
Assuntos
Compostos de Alumínio/química , Compostos de Cálcio/química , Césio/química , Manganês/química , Térbio/química , Transferência de Energia , Luz , Teoria Quântica , Espectrofotometria , TemperaturaRESUMO
A distinct way to target long-lasting phosphors (LLPs) is disclosed. This new material is a metal-organic framework featuring a 1D zig-zag chain and 3D hydrogen bonded PtS net with three-fold interpenetration. It exhibits persistent luminescence lasting about 1 s which can be traced by the naked eye. The green persistent luminescence is exclusively due to emission from multiple triplet excited states. In this way, LLP can be easily achieved by using a simple hydrothermal synthesis without any codopant that in nature is responsible for well-known inorganic LLPs.
RESUMO
Density functional theory has been widely used to investigate the structural and electronic properties of heme-containing proteins such as cytochrome P450. Nevertheless, recent studies have shown that approximate exchange-correlation energy density functionals can incorrectly predict the stability order of spin states in, for instance, iron-containing pyridine and imidazole systems. This raises questions about the validity of earlier theoretical studies. In this work, we systematically investigate a few typical inorganic and organic iron-containing complexes and try to understand the performance difference of various density functionals. Two oxidation states of iron, Fe(II) and Fe(III), with different spin states and both adiabatic and vertical structures are considered. A different description of the outmost molecular orbital is found to play the crucial role. Local density and generalized gradient based functionals bias the lower spin state and produce a more localized frontier orbital that is higher in energy than the hybrid functionals. Energy component analysis has been performed, together with comparison of numerous structural and electronic properties. Implications of the present work to the theoretical study of heme-containing biological molecules and other spin-related systems are discussed.