CIP2A deficiency promotes depression-like behaviors in mice through inhibition of dendritic arborization.

Major depressive disorder (MDD) is a severe mental illness. Decreased brain plasticity and dendritic fields have been consistently found in MDD patients and animal models; however, the underlying molecular mechanisms remain to be clarified. Here, we demonstrate that the deletion of cancerous inhibitor of PP2A (CIP2A), an endogenous inhibitor of protein phosphatase 2A (PP2A), leads to depression-like behaviors in mice. Hippocampal RNA sequencing analysis of CIP2A knockout mice shows alterations in the PI3K-AKT pathway and central nervous system development. In primary neurons, CIP2A stimulates AKT activity and promotes dendritic development. Further analysis reveals that the effect of CIP2A in promoting dendritic development is dependent on PP2A-AKT signaling. In vivo, CIP2A deficiency-induced depression-like behaviors and impaired dendritic arborization are rescued by AKT activation. Decreased CIP2A expression and impaired dendrite branching are observed in a mouse model of chronic unpredictable mild stress (CUMS). Indicative of clinical relevance to humans, CIP2A expression is found decreased in transcriptomes from MDD patients. In conclusion, we discover a novel mechanism that CIP2A deficiency promotes depression through the regulation of PP2A-AKT signaling and dendritic arborization.

Preparation and efficacy verification of three-dimensional printed partitioned multi-effect precision-care gel facial mask.

OBJECTIVE: A partition multi-effect precision-care gel facial mask conforming to facial skin characteristics was prepared using three-dimensional (3D) printing technology. METHODS: First, the hydrogel matrix and humectant of a 3D-printed gel for facial masks were screened, and three 3D-printed gels of arbutin, hexapeptide, and salicylic acid were prepared with whitening, wrinkle removal, and oil control functions, respectively. Skin irritation tests were performed on the gels. Physicochemical properties such as pH, heat and cold tolerance were evaluated. The efficacy of three 3D-printed gels was assessed by measuring melanin value, wrinkle depression score, and oil secretion. Finally, the facial mask model design and printing parameters were studied, and a partition multi-effect precision-care gel facial mask was printed in line with facial skin characteristics. RESULTS: For the 3D-printed facial mask, the gel prescription with 2% hydroxyethyl cellulose gel as matrix and 7% glycerol as humectant was the best. The prepared 3D-printed gel did not irritate the human skin, and its physicochemical properties met the Chinese facial mask industry standard (QB/T2872-2017). We showed that three types of 3D-printed gels containing arbutin, hexapeptide, and salicylic acid could be applied to the corresponding parts of the face to solve different problems, such as facial skin dullness, wrinkles, and oil secretion. Therefore, according to facial physiological characteristics, the facial mask model was designed for the forehead and nasolabial fold, which needs to be anti-wrinkled; the cheek, which needs to be whitened; and the nose and chin, which need oil control. The optimal printing parameters were 0.26 mm nozzle diameter, 90 mm/s printing speed, 30% filling density, 140% wire extrusion ratio, and 0.25 mm layer height. Different skin care effects can be achieved using a three-nozzle printer to print arbutin, hexapeptide, or salicylic acid gel on the mask's forehead and nasolabial fold, cheek, and nose and chin, respectively. CONCLUSION: The 3D-printed partition multi-effect care gel facial mask prepared according to the skin features of different parts of the face can overcome the problem of the single skincare effect of the mass-produced facial masks.

OBJECTIF: Un masque facial de soin de précision en gel à effets multiples, adapté aux caractéristiques de la peau du visage, a été préparé à l'aide de la technologie d'impression tridimensionnelle (3D). MÉTHODES: Tout d'abord, la matrice d'hydrogel et l'humectant d'un gel imprimé en 3D pour les masques faciaux ont été sélectionnés, et trois gels imprimés en 3D d'arbutine, d'hexapeptide et d'acide salicylique ont été préparés avec des fonctions de blanchiment, d'élimination des rides et de contrôle du sébum, respectivement. Des tests d'irritation cutanée ont été réalisés sur les gels. Les propriétés physicochimiques telles que le pH et la tolérance à la chaleur et au froid ont été évaluées. L'efficacité des trois gels imprimés en 3D a été évaluée en mesurant la valeur de la mélanine, le score de dépression des rides et la sécrétion de sébum. Enfin, la conception du modèle de masque facial et les paramètres d'impression ont été étudiés, et un masque facial de gel de soin de précision à effets multiples a été imprimé en fonction des caractéristiques de la peau du visage. RÉSULTATS: Pour le masque facial imprimé en 3D, la prescription de gel avec 2 % de gel d'hydroxyéthylcellulose comme matrice et 7 % de glycérol comme humectant était la meilleure. Le gel imprimé en 3D n'a pas irrité la peau humaine et ses propriétés physicochimiques sont conformes à la norme industrielle chinoise relative aux masques faciaux (QB/T2872­2017). Nous avons montré que trois types de gels imprimés en 3D contenant de l'arbutine, de l'hexapeptide et de l'acide salicylique pouvaient être appliqués aux parties correspondantes du visage pour résoudre différents problèmes, tels que l'aspect terne de la peau du visage, les rides et la sécrétion de sébum. Par conséquent, en fonction des caractéristiques physiologiques du visage, le modèle de masque facial a été conçu pour le front et le sillon nasogénien, qui doivent être antirides, la joue, qui doit être blanchie, et le nez et le menton, qui ont besoin d'un contrôle du sébum. Les paramètres d'impression optimaux étaient les suivants : diamètre de buse de 0,26 mm, vitesse d'impression de 90 mm/s, densité de remplissage de 30 %, rapport d'extrusion du fil de 140 % et hauteur de couche de 0,25 mm. Différents effets de soin de la peau peuvent être obtenus en utilisant une imprimante à trois buses pour imprimer de l'arbutine, de l'hexapeptide ou du gel d'acide salicylique sur le front et le sillon nasogénien, la joue, le nez et le menton du masque, respectivement. CONCLUSION: Le masque facial en gel de soin à effets multiples imprimé en 3D et préparé en fonction des caractéristiques de la peau des différentes parties du visage peut résoudre le problème de l'effet de soin unique des masques faciaux produits en masse.

Smart Phototheranostics based on Carbon Nanohorns for Precise Imaging-Guided Post-PDT toward Residual Tumor Cells after Initial Phototherapy.

As promising photonic material, phototheranostics can be activated in the laser irradiation range of tumor with sensitivity and spatiotemporal precision. However, it is difficult to completely eradicate solid tumors due to their irregularity and limited laser irradiation area. Herein, multi-stimulus responsive HA-Ce6@SWNHs were constructed with single-walled carbon nanohorns (SWNHs) and chlorine e6 (Ce6) modified hyaluronic acid (HA) via non-covalent binding. This SWNHs-based phototheranostics not only exhibited water dispersion but also could target tumor and be activated by near-infrared light for photodynamic therapy (PDT) and photothermal therapy (PTT). Additionally, HA-Ce6@SWNHs could be degraded by hyaluronidase in residual tumor cells, causing HA-Ce6 to fall off the SWNHs surfaces to restore autofluorescence, thus precisely guiding the programmed photodynamic treatments for residual tumor cells after the initial phototherapy. Thus, this work provides a rationally designed multiple-stimulus-response strategy to develop smart SWNHs-based phototheranostics for precise PDT/PTT and post-treatment imaging-guided PDT of residual tumor cells.

Active Ensembles in Methane Dehydroaromatization over Molybdenum/ZSM-5 Zeolite Identified by 2D 1 H-95 Mo Magic Angle Spinning Nuclear Magnetic Resonance Correlation Spectroscopy.

Methane dehydroaromatization (MDA) over Mo-modified zeolite is a potential catalytic route for converting natural gas into valuable aromatics. However, the active species in this reaction are highly complex, involving diverse Mo species, acidic sites of zeolite, and organic molecules. Herein, we apply 1D 95 Mo NMR and 2D 1 H-95 Mo heteronuclear correlation solid-state NMR spectroscopy to directly observe the active ensembles in the confined channels of Mo/ZSM-5 zeolite during the MDA reaction. We monitor the evolution of the spatial correlations of Mo species with the Brønsted acid sites and organic products (olefins and aromatics) in the zeolite channels. We identified two kinds of MoOx Cy species, with the more carbidic one (MoOx Cy -II) exhibiting higher activity for methane activation and benzene formation. The strong spatial interactions between the active Mo species and the organic species in the Mo/ZSM-5 pores are related to the MDA activity.

Risk stratification of abdominal tumors in children with amide proton transfer imaging.

OBJECTIVES: To evaluate the potential of molecular amide proton transfer (APT) MRI for predicting the risk group of abdominal tumors in children, and compare it with quantitative T1 and T2 mapping. METHODS: This prospective study enrolled 133 untreated pediatric patients with suspected abdominal tumors from February 2019 to September 2020. APT-weighted (APTw) imaging and quantitative relaxation time mapping sequences were executed for each subject. The region of interest (ROI) was generated with automatic artifact detection and ROI-shrinking algorithms, within which the APTw, T1, and T2 indices were calculated and compared between different risk groups. The prediction performance of different imaging parameters was assessed with the receiver operating characteristics (ROC) analysis and Student's t-test. RESULTS: Fifty-seven patients were included in the final analysis, including 24 neuroblastomas (NB), 18 Wilms' tumors (WT), and 15 hepatoblastomas (HB). The APTw signal was significantly (p < .001) higher in patients with high-risk NB than those with low-risk NB, while the difference between patients with low-risk and high-risk WT (p = .69) or HB (p = .35) was not statistically significant. The associated areas under the curve (AUC) for APT to differentiate low-risk and high-risk NB, WT, and HB were 0.93, 0.58, and 0.71, respectively. The quantitative T1 and T2 values generated AUCs of 0.61-0.70 for the risk stratification of abdominal tumors. CONCLUSIONS: APT MRI is a potential imaging biomarker for stratifying the risk group of pediatric neuroblastoma in the abdomen preoperatively and provides added value to structural MRI. KEY POINTS: • Amide proton transfer (APT) imaging showed significantly (p < .001) higher values in pediatric patients with high-risk neuroblastoma than those with low-risk neuroblastoma, but did not demonstrate a significant difference in patients with Wilms' tumor (p = .69) or hepatoblastoma (p = .35). • The associated areas under the curve (AUC) for APT to differentiate low-risk and high-risk neuroblastoma, Wilms' tumor, and hepatoblastoma were 0.93, 0.58, and 0.71, respectively. • The quantitative T1 and T2 indices generated AUCs of 0.61-0.70 for dichotomizing the risk group of abdominal tumors.

A Novel Preparation Method for Effervescent Tablets of Xianganfang Containing Fresh Juice using a Semi-Solid Extrusion 3D Printer with Three Cartridge Holders.

This study aimed to prepare effervescent tablets of traditional Chinese medicine Xianganfang with fresh juice using a semi-solid 3D printer with three cartridge holders to seperate acid and alkali source by drug paste through model design to avoid sticking impact and premature effervescence during the tableting in the conventional preparation process. The powder of Xianganfang including fresh juice of Phyllanthus emblica and licorice extract was obtained by vacuum freeze-drying with 50% mannitol as cryoprotectant. Then, the formulation of 3D-printed effervescent tablets was investigated. Further 5% HPMC hydroalcoholic gel was mixed with sodium bicarbonate and freeze-dried Xianganfang powder to prepare alkali source and drug paste respectively while 30% PVP ethanol solution was mixed with tartaric acid to prepare acid source paste; these three pastes had good printability. The pastes of drug, acid, and alkali were loaded into three syringe cartridges separately and numbered as "3," "5," and "7," according to cartridge holders of the 3D printer, and printed in the order of "537,353,735" for separating acid and alkali by drug to avoid premature effervescence. And the basic printing parameters were optimized. The tablets were evaluated by the appearance, tablet weight variation, hardness, disintegration time, friability, pH, and stability. The physicochemical properties all conformed to the Chinese Pharmacopoeia 2020 edition. The content of the active ingredient gallic acid was 0.769 ± 0.019 mg/g. This study provided a new method to prepare effervescent tablets of traditional Chinese medicine with fresh juice using 3D printing technology.

[Progress in Precision Medicine of Radiomics in Abdominal Tumors Practice].

With the advent of the era of artificial intelligence, as an emerging technology, radiomics can extract a large amount of quantitative information describing the physiological condition and phenotypic characteristics of tumors with high throughput from the massive data of CT, MRI and other imaging tomography, and analyze these high-dimensional imaging omics features containing disease pathophysiological information can be used to accurately determine tumor differentiation, staging, and predict tumor behavior, which has broad application prospects. This article aims to introduce the technical principles of radiomics and its abdominal tumor application status, and to prospect its application prospects in pediatric abdominal neuroblastoma.

Establishment of a regression model of bone metabolism markers for the diagnosis of bone metastases in lung cancer.

BACKGROUND: The aim of this study was to establish a regression equation model of serum bone metabolism markers. We analyzed the diagnostic value of bone metastases in lung cancer and provided laboratory evidence for the early clinical treatment of bone metastases in lung cancer. METHODS: A total of 339 patients with non-metastatic lung cancer, patients with lung cancer with bone metastasis, and patients with benign lung disease who were treated in our hospital from July 2012 to October 2015 were included. A total of 103 patients with lung cancer in the non-metastatic group, 128 patients with lung cancer combined with bone metastasis group, and 108 patients with benign lung diseases who had nontumor and nonbone metabolism-related diseases were selected as the control group. Detection and analysis of type I collagen carboxyl terminal peptide ß-special sequence (ß-CTX), total type I procollagen amino terminal propeptide (TPINP), N-terminal-mid fragment of osteocalcin (N-MID), parathyroid hormone (PTH), vitamin D (VitD3), alkaline phosphatase (ALP), calcium (CA), phosphorus (P), cytokeratin 19 fragment (F211), and other indicators were performed. Four multiple regression models were established to determine the best diagnostic model for lung cancer with bone metastasis. RESULTS: Analysis of single indicators of bone metabolism markers in lung cancer was performed, among which F211, ß-CTX, TPINP, and ALP were significantly different (P < 0.05). The ROC curve of each indicator was less than 0.712. Based on the multiple regression models, the fourth model was the best and was much better than a single indicator with an AUC of 0.856, a sensitivity of 70.0%, a specificity of 91.0%, a positive predictive value of 82.5%, and a negative predictive value of 72.0%. CONCLUSION: Multiple regression models of bone metabolism markers were established. These models can be used to evaluate the progression of lung cancer and provide a basis for the early treatment of bone metastases.

Case report of Langerhans cell histiocytosis in a fetus detected by magnetic resonance imaging.

Langerhans cell histiocytosis (LCH) is a rare disease, and the diagnosis of LCH is mainly based on clinical manifestation, imaging and pathological examinations. But during pregnancy, imaging examinations especially play an important role in the diagnosis and prognostic assessment of fetal LCH. Up to now, there has been no report about magnetic resonance imaging (MRI) features of fetal LCH. We reported a 32-year-old woman at 36 weeks' gestation took fetal MRI because of fetal anomalies diagnosed by ultrasonography. On the fetus's MR images, the thymus was slightly enlarged with smooth or lobulated contour in supra anterior mediastinum, displayed heterogeneous signals and contained multiple small cysts on T2WI. Innumerable irregular nodules and patchy shadows were present throughout both lungs. Pulmonary lesions were bilateral and diffuse with relative sparing of the costophrenic angles. The margins of these lesions were fluffy and indistinct. These lesions showed heterogeneous signals on T2WI. MRI showed no lesions in skin region. After birth, lots of round or oval skin lesions distributed all over the baby's body presenting as ulcerated or blister-like rashes. The chest computer tomography (CT) showed punctate calcification and heterogeneous enhancement in the thymus and bilateral diffuse reticular or reticulonodular opacities in both lungs with fluffy and indistinct margins. Pathological finding was consistent with LCH. Through reporting MRI features of LCH in one fetus, this study aims to improve awareness of fetal LCH in radiologists and clinicians, to improve the prenatal diagnostic rate of this disorder.

Increasing Quantum Correlations Based on Measurement-Induced Disturbance via a Swapping Procedure with Two-Qubit Mixed States.

In this paper, quantum correlation (QC) swapping for certain separable two-qubit mixed states is treated. A QC quantifier, measurement-induced disturbance (MID) (Luo in Phys Rev A 77:022301, 2008), is employed to characterize and quantify QCs in the relevant states. Properties of all QCs in the swapping process are revealed. Particularly, it is found that MID can be increased through QC swapping for certain separable two-qubit mixed states.

Etiology and genetic evolution of canine coronavirus circulating in five provinces of China, during 2018-2019.

As the outbreaks of COVID-19 in worldwide, coronavirus has once again caught the attention of people. Canine coronavirus is widespread among dog population, and sometimes causes even fatal cases. Here, to characterize the prevalence and evolution of current circulating canine coronavirus (CCoV) strains in China, we collected 213 fecal samples from diarrheic pet dogs between 2018 and 2019. Of the 213 samples, we found 51 (23.94%) were positive for CCoV. Co-infection with canine parvovirus (CPV), canine astrovirus (CaAstV), canine kobuvirus (CaKV), Torque teno canis virus (TTCaV) were ubiquitous existed. Mixed infection of different CCoV subtypes exists extensively. Considering the limited sequences data in recent years, we sequenced 7 nearly complete genomes and 10 complete spike gene. Phylogenetic analysis of spike gene revealed a new subtype CCoV-II Variant and CCoV-IIa was the most prevalent subtype currently circulating. Moreover, we identified strain B906_ZJ_2019 shared 93.24% nucleotide identifies with previous strain A76, and both of them clustered with CCoV-II Variant, which were not well clustered with the known subtypes. Recombination analysis of B906_ZJ_2019 indicated that strain B906_ZJ_2019 may a recombinant variant between CCoV-I and CCoV-II, which is consistent with strain A76. Furthermore, amino acid variations widely existed among current CCoV-IIa strains circulating in China and the classic CCoV-IIa strains, in spite of the unknown functions. In a word, we report a useful information as to the etiology and evolution of canine coronavirus in China based on the available sequences, which is urgent for the devise of future effective disease prevention and control strategies.

Natural Polyphenol-Vanadium Oxide Nanozymes for Synergistic Chemodynamic/Photothermal Therapy.

The selection of suitable nanozymes with easy synthesis, tumor specificity, multifunction, and high therapeutics is meaningful for tumor therapy. Herein, a facile one-step assembly approach was employed to successfully prepare a novel kind of natural polyphenol tannic acid (TA) hybrid with mixed valence vanadium oxide nanosheets (TA@VOx NSs). In this system, VOx is assembled with TA through metal-phenolic coordination interaction to both introduce superior peroxidase-like activity and high near infrared (NIR) absorption owing to partial reduction of vanadium from V5+ to V4+ . The presence of mixed valence vanadium oxide in TA@VOx NSs is proved to be the key for the catalytic reaction of hydrogen peroxide (H2 O2 ) to . OH, and the corresponding catalytic mechanism of H2 O2 by TA@VOx NSs is proposed. Benefitting from such peroxidase-like activity of TA@VOx NSs, the overproduced H2 O2 of the tumor microenvironment allows the realization of tumor-specific chemodynamic therapy (CDT). As a valid supplement to CDT, the NIR absorption enables TA@VOx NSs to have NIR light-mediated conversion ability for photothermal therapy (PTT) of cancers. Furthermore, in vitro and in vivo experiments confirmed that TA@VOx NSs can effectively inhibit the growth of tumors by synergistic CDT/PTT. These results offer a promising way to develop novel vanadium oxide-based nanozymes for enhanced synergistic tumor-specific treatment.

Fast start-up strategies of MBBR for mariculture wastewater treatment.

Moving bed biofilm reactor (MBBR) is widely used for ammonia removal in saline recirculating aquaculture systems but often faces a slow start-up problem. The aim of this study was to develop a strategy for the rapid start-up of MBBR treating synthetic mariculture wastewater. Changes in nitrification performance, biofilm characteristics and bacterial community were assessed in response to various start-up strategies: R1 as the control; R2 with step-decrease of inlet NH4+-N; R3 with step-increase of inlet salinity; R4 added with particulate organic matter (POM) and R5 inoculated with nitrifying bacteria. Results show that nitrification was completed on day 63 for R3, 16-18 days faster than the other strategies. The highest protein (28.2 ±â€¯5.1 mg/g·VS) and polysaccharide (59.4 ±â€¯0.4 mg/g·VS) contents were observed in R3, likely linked to the faster biofilm formation. Fourier Transform infrared spectroscopy (FTIR) analysis confirmed the typical constituents of carbohydrates, proteins, lipids and DNA in biofilms. Moreover, along with the biofilm development in R3, the intensity of the peak at 1400 cm-1 (assigned to specific amides) decreased. Pyrosequencing of 16s rRNA revealed that Gammaproteobacteria was the predominating microbial community at class level (35.6%) in R3. qPCR analysis further verified the significantly higher gene copies of amoA (1.57 × 104 copies/µL) and nxrB (5.51 × 103 copies/µL) in R3. Results obtained make the elevated salinity strategy a promising alternative for the rapid nitrification start-up of saline wastewater.

Novel birefringence interrogation for Sagnac loop interferometer sensor with unlimited linear measurement range.

A novel demodulation method for Sagnac loop interferometer based sensor has been proposed and demonstrated, by unwrapping the phase changes with birefringence interrogation. A temperature sensor based on Sagnac loop interferometer has been used to verify the feasibility of the proposed method. Several tests with 40 °C temperature range have been accomplished with a great linearity of 0.9996 in full range. The proposed scheme is universal for all Sagnac loop interferometer based sensors and it has unlimited linear measurable range which overwhelming the conventional demodulation method with peak/dip tracing. Furthermore, the influence of the wavelength sampling interval and wavelength span on the demodulation error has been discussed in this work. The proposed interrogation method has a great significance for Sagnac loop interferometer sensor and it might greatly enhance the availability of this type of sensors in practical application.

Precise Brillouin gain and phase spectra measurements in coherent BOTDA sensor with phase fluctuation cancellation.

In order to cancel phase fluctuation induced Brillouin gain spectrum (BGS) and Brillouin phase spectrum (BPS) distortions, a new scheme with phase fluctuation cancellation (PFC) is proposed to realize precise BGS and BPS measurements in coherent BOTDA sensors. We present comprehensive and theoretical analysis about the effect of phase fluctuation on the shape of BGS and BPS, and further design a new experimental setup to fully cancel phase fluctuation induced measurement errors. In our new scheme, the two signals sent into the in-phase/quadrature (I/Q) demodulator are almost the same except for the additional amplitude amplification and phase shift induced by Brillouin gain, thus a strict phase synchronization between them has been realized (i.e., PFC). Experimental results show that the biggest BFS decoding error induced by phase fluctuation is reduced from 4.9MHz to 0.4MHz over a 40-km sensing fiber.

Extended reach OFDM-PON using super-Nyquist image induced aliasing.

We investigate a novel dispersion compensating technique in double sideband (DSB) modulated and directed-detected (DD) passive optical network (PON) systems using super-Nyquist image induced aliasing. We show that diversity is introduced to the higher frequency components by deliberate aliasing using the super-Nyquist images. We then propose to use fractional sampling and per-subcarrier maximum ratio combining (MRC) to harvest this diversity. We evaluate the performance of conventional orthogonal frequency division multiplexing (OFDM) signals along with discrete Fourier transform spread (DFT-S) OFDM and code-division multiplexing OFDM (CDM-OFDM) signals using the proposed scheme. The results show that the DFT-S OFDM signal has the best performance due to spectrum spreading and its superior peak-to-average power ratio (PAPR). By using the proposed scheme, the reach of a 10-GHz bandwidth QPSK modulated OFDM-PON can be extended to around 90 km. We also experimentally show that the achievable data rate of the OFDM signals can be effectively increased using the proposed scheme when adaptive bit loading is applied, depending on the transmission distance. A 10.5% and 5.2% increase in the achievable bit rate can be obtained for DSB modulated OFDM-PONs in 48.3-km and 83.2-km standard single mode fiber (SSMF) transmission cases, respectively, without any modification on the transmitter. A 40-Gb/s OFDM transmission over 83.2-km SSMF is successfully demonstrated.

Sciatic nerve course in adult patients with unilateral developmental dysplasia of the hip: implications for hip surgery.

BACKGROUND: Sciatic nerve injury is a disastrous adverse complication of surgery and can cause debilitating pain, functional impairment and poor quality of life. Patients with developmental dysplasia of the hip (DDH) have a high incidence of sciatic nerve injury after total hip arthroplasty (THA). A better understanding of the course of the sciatic nerve in patients with DDH may help minimise the risk of sciatic nerve injury after THA. METHODS: A total of 35 adult patients with unilateral DDH were enrolled in this retrospective study. We reviewed the patients' computed tomography (CT) scans, which included the area from the iliac crest to below the lesser trochanter. The distance between the sciatic nerve and regional anatomic landmarks in four different sections on CT scans was measured to identify the course of the sciatic nerve. RESULTS: The distance from the sciatic nerve to the spine's midline was shorter on the affected side than on the healthy side (p < 0.05); the same difference was also detected in the distance to the ilium/ischium outside the true pelvis (p < 0.05). The distance to the greater trochanter was longer on the affected side (p < 0.05). However, the two sides showed no significant difference in the distance from the sciatic nerve to the lesser trochanter (p > 0.05). CONCLUSIONS: For patients with unilateral DDH, the sciatic nerve was located near the ischium and ilium but relatively far from the femur of the affected hip joint, compared to its location on the healthy side. These findings reveal that sciatic nerve becomes shorter in the affected low-limb and is relatively unlikely to be directly injuried using the posterolateral approach in patients with unilateral DDH.

Manuka honey as a non-antibiotic alternative against Staphylococcus spp. and their small colony variant (SCVs) phenotypes.

The antibiotic resistance (ABR) crisis is an urgent global health priority. Staphylococci are among the problematic bacteria contributing to this emergency owing to their recalcitrance to many clinically important antibiotics. Staphylococcal pathogenesis is further complicated by the presence of small colony variants (SCVs), a bacterial subpopulation displaying atypical characteristics including retarded growth, prolific biofilm formation, heightened antibiotic tolerance, and enhanced intracellular persistence. These capabilities severely impede current chemotherapeutics, resulting in chronic infections, poor patient outcomes, and significant economic burden. Tackling ABR requires alternative measures beyond the conventional options that have dominated treatment regimens over the past 8 decades. Non-antibiotic therapies are gaining interest in this arena, including the use of honey, which despite having ancient therapeutic roots has now been reimagined as an alternative treatment beyond just traditional topical use, to include the treatment of an array of difficult-to-treat staphylococcal infections. This literature review focused on Manuka honey (MH) and its efficacy as an anti-staphylococcal treatment. We summarized the studies that have used this product and the technologies employed to study the antibacterial mechanisms that render MH a suitable agent for the management of problematic staphylococcal infections, including those involving staphylococcal SCVs. We also discussed the status of staphylococcal resistance development to MH and other factors that may impact its efficacy as an alternative therapy to help combat ABR.

Association between triglyceride glucose index and all-cause mortality in patients with cerebrovascular disease: a retrospective study.

BACKGROUND: Triglyceride glucose (TyG) is associated with stroke, atherosclerosis, and adverse clinical outcomes. However, its correlation with cerebrovascular disease (CVD) mortality remains unclear. This study aimed to investigate the relationship between TyG index and mortality in patients with CVD. METHODS: Patient data sourced from the Medical Information Mart for Intensive Care -IV database were categorized based on TyG quartiles. Kaplan-Meier survival analysis was used to estimate survival disparities among the TyG subgroups. Cox proportional risk modeling was used to examine the association between the TyG index and mortality. Generalized summation models were applied to fit the smoothed curves. log-likelihood ratio test were used to analyze the non-linear relationship. RESULTS: The study comprised 1,965 patients (50.18% were male). The 28-day and 90-day mortality rates were 20.10% and 24.48%, respectively. The TyG index exhibited a linear relationship with the 28-day mortality (Hazards ratio (HR), 1.16; 95% confidence interval (CI), 0.99-1.36) and the 90-day mortality (HR, 1.18; 95% CI, 1.02-1.37). In the TyG Q4 group, each 1 mg/dl increase was linked to a 35% rise in the risk of 28-day mortality and a 38% increase in the risk of 90-day mortality. Subgroup analyses highlighted a more substantial association between TyG index and 90-day mortality in the diabetic group. CONCLUSION: Our findings underscore the positive association between TyG and the 28- and 90-day mortality rates in patients with CVD. This insight may prove pivotal for identifying at-risk populations and enhancing risk prediction in the clinical management of CVD.

Frontiers and hotspots in hand, foot, and mouth disease research during 2006 to 2023: A bibliometric and visual analysis.

BACKGROUND: Enteroviruses-infected hand, foot, and mouth disease (HFMD) seriously threatens human health. This study aimed to analyze the research status, hotspots, and frontiers of HFMD. METHODS: Publications on HFMD between January 1, 2006, and January 31, 2023, were retrieved from the Web of Science Core database. Bibliometric tools, including CiteSpace, VOSviewer, R package "Bibiometrix," SCImago Graphica, and Charticulator, were utilized to analyze and visualize the data. RESULTS: A total of 1860 articles from 424 journals, involving 8815 authors from 64 countries and 1797 institutions were analyzed. The number of studies on HFMD has shown an increasing trend over the past 18 years, with an annual increase observed since 2006, which is particularly prominent after 2010. Research in this field has centered on the Asian region. Notably, the research hotspots were mainly focused on vaccines, epidemiology, and pathogenesis of HFMD. Among the researchers in this field, Zhang Yong emerged as the most prolific author, while Xu Wenbo had the most significant influence. The Chinese Academy of Sciences was the most productive institution, and China was the most productive country for HFMD research. CONCLUSION: By bibliometric analysis, researchers in the HMFD field can efficiently identify and visually represent their research focus and limitations. In the future, it is crucial to maintain ongoing surveillance of HFMD outbreaks and their pathogenic changes. Additionally, future research should extensively explore the molecular mechanisms underlying Enteroviruses-induced HFMD with a focus on developing vaccines and therapies.