Influence of wavelength, linewidth, and temperature on second harmonic generation of a superfluorescent fiber source.

Low-coherence tunable visible light sources have a wide range of applications in imaging, spectroscopy, medicine, and so on. Second harmonic generation (SHG) based on a superfluorescent fiber source (SFS) can produce high-brightness visible light while retaining most of the characteristics of superfluorescent sources, such as low coherence, low intensity noise and flexible tunability. However, due to the limitations in phase matching conditions, SHG based on SFS is difficult to reach an equilibrium between high efficiency and robustness of phase matching to temperature variation. In this paper, based on a spectral tunable SFS, we provide a comprehensive analysis, both experimental and theoretical, of the impact of wavelength, linewidth, and temperature on the output performance of SHG. Our findings indicate that broader linewidths adversely affect conversion efficiency, yet they enhance the capacity to withstand temperature variations and central wavelength detuning, which is an advantage that traditional SHG methods do not possess. This work may pave the way for utilizing low-coherence visible light in domains and extreme environments where robust output stability becomes imperative.

Phosphorus-doped fiber for flat octave spanning supercontinuum generation.

In a fiber supercontinuum (SC) source, the Raman scattering effect plays a significant role in extending the spectrum into a longer wavelength. Here, by using a phosphorus-doped fiber with a broad Raman gain spectrum as the nonlinear medium, we demonstrate flat SC generation spanning from 850 to 2150 nm. Within the wavelength range of 1.1-2.0 µm, the spectral power density fluctuation is less than 7 dB. Compared to a similar SC source based on a germanium-doped fiber with narrower Raman gain spectrum, the wavelength span is 300 nm broader, and the spectral power density fluctuation is 5 dB lower. This work demonstrates the phosphorus-doped fiber's great advantage in spectrally flat SC generation, which is of great significance in many applications such as optical coherence tomography, absorption spectroscopy, and telecommunication.

Broadband tunable Raman fiber laser with monochromatic pump.

Raman fiber laser (RFL) has been widely adopted in astronomy, optical sensing, imaging, and communication due to its unique advantages of flexible wavelength and broadband gain spectrum. Conventional RFLs are generally based on silica fiber. Here, we demonstrate that the phosphosilicate fiber has a broader Raman gain spectrum as compared to the common silica fiber, making it a better choice for broadband Raman conversion. By using the phosphosilicate fiber as gain medium, we propose and build a tunable RFL, and compare its operation bandwidth with a silica fiber-based RFL. The silica fiber-based RFL can operate within the Raman shift range of 4.9 THz (9.8-14.7 THz), whereas in the phosphosilicate fiber-based RFL, efficient lasing is achieved over the Raman shift range of 13.7 THz (3.5-17.2 THz). The operation bandwidths of the two RFLs are also calculated theoretically. The simulation results agree well with experimental data, where the operation bandwidth of the phosphosilicate fiber-based RFL is more than twice of that of the silica fiber-based RFL. This work reveals the phosphosilicate fiber's unique advantage in broadband Raman conversion, which has great potential in increasing the reach and capacity of optical communication systems.

A Frequency Up-Conversion Piezoelectric Energy Harvester Shunted to a Synchronous Electric Charge Extraction Circuit.

A frequency up-conversion piezoelectric energy harvester (FUC-PEH) consists of a force amplifier, a piezoelectric stack, a low-frequency oscillator (LFO), and a stop limiter. The force amplifier generates the amplification of stress on the piezoelectric stack. The LFO, comprising a spring and a mass block, impacts the stop limiter during vibration to induce high-frequency oscillations within the piezoelectric stack. In this paper, we represent and simplify the FUC-PEH as a lumped-parameter model based on piezoelectric material constitutive equations and structural dynamic theories. Using the electromechanical analogy, we developed an equivalent circuit model (ECM) of the FUC-PEH. A parametric study was performed to investigate the impact of system parameters, such as spring stiffness and concentrated mass, on the FUC-PEH performance. The collision-induced amplitude truncation (AT) effect enlarges the operation bandwidth. ECM simulations show that low-frequency input excitation is converted into a high-frequency output response, enhancing the energy conversion efficiency. Furthermore, we aimed to improve the FUC-PEH's performance using a synchronous electric charge extraction (SECE) circuit. Using the ECM approach, we established a system-level model that considers the electromechanical coupling behavior. The simulation results provide insights into the performance of FUC harvesters with SECE circuits and offer valuable design guidance.

Mode division multiplexing reconstructive spectrometer with an all-fiber photonics lantern.

This study presents a high-accuracy, all-fiber mode division multiplexing (MDM) reconstructive spectrometer (RS). The MDM was achieved by utilizing a custom-designed 3 × 1 mode-selective photonics lantern to launch distinct spatial modes into the multimode fiber (MMF). This facilitated the information transmission by increasing light scattering processes, thereby encoding the optical spectra more comprehensively into speckle patterns. Spectral resolution of 2 pm and the recovery of 2000 spectral channels were accomplished. Compared to methods employing single-mode excitation and two-mode excitation, the three-mode excitation method reduced the recovered error by 88% and 50% respectively. A resolution enhancement approach based on alternating mode modulation was proposed, reaching the MMF limit for the 3 dB bandwidth of the spectral correlation function. The proof-of-concept study can be further extended to encompass diverse programmable mode excitations. It is not only succinct and highly efficient but also well-suited for a variety of high-accuracy, high-resolution spectral measurement scenarios.

High power tunable Raman fiber laser at 1.2 µm waveband.

Development of a high power fiber laser at special waveband, which is difficult to achieve by conventional rare-earth-doped fibers, is a significant challenge. One of the most common methods for achieving lasing at special wavelength is Raman conversion. Phosphorus-doped fiber (PDF), due to the phosphorus-related large frequency shift Raman peak at 40 THz, is a great choice for large frequency shift Raman conversion. Here, by adopting 150 m large mode area triple-clad PDF as Raman gain medium, and a novel wavelength-selective feedback mechanism to suppress the silica-related Raman emission, we build a high power cladding-pumped Raman fiber laser at 1.2 µm waveband. A Raman signal with power up to 735.8 W at 1252.7 nm is obtained. To the best of our knowledge, this is the highest output power ever reported for fiber lasers at 1.2 µm waveband. Moreover, by tuning the wavelength of the pump source, a tunable Raman output of more than 450 W over a wavelength range of 1240.6-1252.7 nm is demonstrated. This work proves PDF's advantage in high power large frequency shift Raman conversion with a cladding pump scheme, thus providing a good solution for a high power laser source at special waveband.

IntelliSense Bio-Ionotronics Battery for Early Warning of Geological Seepage.

Water seepage-induced geological hazards (SIGHs), including landslides, collapse, debris flow, and ground fissures, often cause substantial human mortality, economic losses, and environmental damage. However, an early warning of geological water seepage remains a significant challenge. A self-powered, cost-effective, reliable, and susceptible SIGH early warning system (SIGH-EWS) is reported herein. This system designed the all-solid, sustainable, fire retardant, and safe-to-use bio-ionotronic batteries to provide a stable power supply for Internet of Things chipsets. Furthermore, the batteries' outstanding humidity and water sensitivity allow sensing of the water seepage emergence. Integrating energy management and wireless communication systems, the SIGH-EWS realizes timely alerts for early water seepage in different water and soil environments with a time resolution in seconds. Based on these merits, the SIGH-EWS demonstrates promising application prospects for early warning of geological disasters and corresponding design strategies that can potentially guide the designs of next-generation geological hazard alarm systems.

Circuit Techniques for High Efficiency Piezoelectric Energy Harvesting.

This brief presents a tutorial on multifaceted techniques for high efficiency piezoelectric energy harvesting. For the purpose of helping design piezoelectric energy harvesting system according to different application scenarios, we summarize and discuss the recent design trends and challenges. We divide the design focus into the following three categories, namely, (1) AC-DC rectifiers, (2) CP compensation circuits, (3) maximum power point tracking (MPPT) circuits. The features, problems encountered, and suitable systems of various AC-DC rectifier topologies are introduced and compared. The important role of non-linear methods for piezoelectric energy harvesting is illustrated from the perspective of impedance matching. Energy extraction techniques and voltage flipping techniques based on inductors, capacitors, and hybrid structures are analyzed. MPPT techniques with different features and targets are discussed.

Phosphosilicate Fiber-Based Low Quantum Defect Raman Fiber Laser with Ultrahigh Spectral Purity.

The phosphosilicate fiber-based Raman fiber laser (RFL) has great potential in achieving low-quantum defect (QD) high-power laser output. However, the laser's performance could be seriously degraded by the Raman-assisted four-wave mixing (FWM) effect and spontaneous Raman generation at 14.7 THz. To find possible ways to suppress the Raman-assisted FWM effect and spontaneous Raman generation, here, we propose a revised power-balanced model to simulate the nonlinear process in the low-QD RFL. The power evolution characteristics in this low-QD RFL with different pump directions are calculated. The simulation results show that, compared to the forward-pumped low-QD RFL, the threshold powers of spontaneous Raman generation in the backward-pumped RFL are increased by 40% and the Raman-assisted FWM effect is well suppressed. Based on the simulation work, we change the pump direction of a forward-pumped low-QD RFL into backward pumping. As a result, the maximum signal power is increased by 20% and the corresponding spectral purity is increased to 99.8%. This work offers a way for nonlinear effects controlling in low-QD RFL, which is essential in its further performance scaling.

AlN MEMS filters with extremely high bandwidth widening capability.

This paper presents radio frequency (RF) microelectromechanical system (MEMS) filters with extremely high bandwidth widening capability. The proposed filtering topologies include hybrid configurations consisting of piezoelectric MEMS resonators and surface-mounted lumped elements. The MEMS resonators set the center frequency and provide electromechanical coupling to construct the filters, while the lumped-element-based matching networks help widen the bandwidth (BW) and enhance the out-of-band rejection. Aluminum nitride (AlN) S0 Lamb wave resonators are then applied to the proposed filtering topologies. AlN S0 first- and second-order wideband filters are studied and have shown prominent performance. Finally, the AlN S0 first-order wideband filter is experimentally implemented and characterized. The demonstrated first-order filter shows a large fractional bandwidth (FBW) of 5.6% (achieved with a resonator coupling of 0.94%) and a low insertion loss (IL) of 1.84 dB. The extracted bandwidth widening factor (BWF) is 6, which is approximately 12 times higher than those of the current ladder or lattice filtering topologies. This impressive bandwidth widening capability holds great potential for satisfying the stringent BW requirements of bands n77, n78, and n79 of 5G new radio (NR) and will overcome an outstanding technology hurdle in placing 5G NR into the marketplace.

Phase-Separation-Induced PVDF/Graphene Coating on Fabrics toward Flexible Piezoelectric Sensors.

Clothing-integrated piezoelectric sensors possess great potential for future wearable electronics. In this paper, we reported a phase-separation approach to fabricate flexible piezoelectric sensors based on poly(vinylidene fluoride) (PVDF)/graphene composite coating on commercially available fabrics (PVDF/graphene@F). The structural units of -CH2- and -CF2- of PVDF chains were arranged directionally due to the structural induction of graphene and water during phase separation, which is the key for electroactive phase enrichment. In optimized case, integrating into fabric substrates endows the phase-out PVDF/graphene composite coating 4 times higher voltage output than its film counterpart. Piezoelectric sensor based on PVDF/graphene@F exhibits a sensitivity of 34 V N-1, which is higher than many reports. It also shows low detecting threshold (0.6 mN), which can be applied to distinguish the voices or monitor the motion of body. This simple and effective approach toward PVDF/graphene@F with excellent flexibility provides a promising route toward the development of wearable piezoelectric sensors.