RESUMO
The study utilized transition metal chalcogenide, molybdenum diselenide (MoSe2), for application in the field of bioelectrochemical sensing. The MoSe2was combined with carbon nanotubes (CNTs) by chemical vapor deposition to enhance the specific surface area and improve the detection sensitivity. To further increase the contact area between the electrolyte and the electrode, photolithography techniques were employed to fabricate hive-shaped CNTs, thereby enhancing the specific surface area. Next, cholesterol oxidase (ChOx) was coated onto the electrode material, creating a cholesterol biosensor. Cyclic voltammetry was utilized to detect the concentration of cholesterol. The experiment involved segmented testing for cholesterol concentrations ranging from 0µM to 10 mM. Excellent sensitivity, low detection limits, and high accuracy were achieved. In the cholesterol concentration range of 0µM-100µM, the experiment achieved the highest sensitivity of 4.44µAµMâ cm-2. Consequently, all data indicated that ChOx/MoSe2/CNTs functioned as an excellent cholesterol sensor in the study.
Assuntos
Técnicas Biossensoriais , Colesterol Oxidase , Colesterol , Técnicas Eletroquímicas , Molibdênio , Nanotubos de Carbono , Nanotubos de Carbono/química , Colesterol/análise , Colesterol/química , Técnicas Biossensoriais/métodos , Molibdênio/química , Técnicas Eletroquímicas/métodos , Colesterol Oxidase/química , Colesterol Oxidase/metabolismo , Limite de Detecção , Eletrodos , Enzimas Imobilizadas/químicaRESUMO
In developing a daylighting system, the overall system efficiency is crucial. In the daylighting system, whether the light propagates parallel strongly affects the efficiency. In this paper, we simulate a multicurvature lens to collimate rays propagated from different angles. We describe a method based on a freeform microlens array, which increases transmission efficiency. Results show that with the freeform microlens array collimator, the light propagates provide at least 50.26% parallel and the efficiency increases by 24.76%, enhancing the core values of the daylighting system in building illumination.
RESUMO
We present a method, the bacterial mineral excretion (BME), for synthesizing two kinds of microcapsules, sodium tungstate and sodium molybdate, and the two metal oxides' corresponding nanoparticles-the former being as small as 22 nm and the latter 15 nm. We fed two strains of bacteria, Shewanella algae and Pandoraea sp., with various concentrations of tungstate or molybdate ions. The concentrations of tungstate and molybdate were adjusted to make microcapsules of different length-to-diameter ratios. We found that the higher the concentration the smaller the nanoparticles were. The nanoparticles came in with three length-to-diameter ratios: 10:1, 3:1 and 1:1, which were achieved by feeding the bacteria respectively with a low concentration, a medium concentration, and a high concentration. The images of the hollow microcapsules were taken via the scanning electron microsphere (SEM). Their crystal structures were verified by X-ray diffraction (XRD)-the crystal structure of molybdate microcapsules is Na2MoO4 and that of tungstate microcapsules is Na2WO4 with Na2W2O7. These syntheses all were accomplished under a near ambient condition.
Assuntos
Burkholderiaceae/metabolismo , Molibdênio/metabolismo , Shewanella/metabolismo , Compostos de Tungstênio/metabolismo , Cápsulas , Molibdênio/química , Nanopartículas/química , Nanopartículas/metabolismo , Compostos de Tungstênio/químicaRESUMO
In this study, we performed thermal chemical vapor deposition for growing vertically aligned carbon nanotube (VACNT) bundles for a field emitter and applied photolithography for defining the arrangement pattern to simultaneously compare square and hexagonal arrangements by using two ratios of the interbundle distance to the bundle height (R) of field emitters. The hexagon arrangement with R = 2 had the lowest turn-on electric field (E to) and highest enhancement factor, whereas the square arrangement with R = 3 had the most stable field emission (FE) characteristic. The number density can reveal the correlation to the lowest E to and highest enhancement factor more effectively than can the R or L. The fluorescent images of the synthesized VACNT bundles manifested the uniformity of FE currents. The results of our study indicate the feasibility of applying the VACNT field emitter arrangement to achieve optimal FE performance.