RESUMO
Chemical mechanical polishing (CMP) offers a promising pathway to smooth third-generation semiconductors. However, it is still a challenge to reduce the use of additional oxidants or/and energy in current CMP processes. Here, a new and green atomically smoothing method: Piezocatalytic-CMP (Piezo-CMP) is reported. Investigation shows that the Piezo-CMP based on tetragonal BaTiO3 (t-BT) can polish the rough surface of a reaction sintering SiC (RS-SiC) to the ultra-smooth surface with an average surface roughness (Ra) of 0.45 nm and the rough surface of a single-crystal 4H-SiC to the atomic planarization Si and C surfaces with Ra of 0.120 and 0.157 nm, respectively. In these processes, t-BT plays a dual role of piezocatalyst and abrasive. That is, it piezo-catalytically generates in-situ active oxygen species to selectively oxidize protruding sites of SiC surface, yielding soft SiO2, and subsequently, it acts as a usual abrasive to mechanically remove these SiO2. This mechanism is further confirmed by density functional theory (DFT) calculation and molecular simulation. In this process, piezocatalytic oxidation is driven only by the original pressure and friction force of a conventional polishing process, thus, the piezo-CMP process do not require any additional oxidant and energy, being a green and effective polishing method.
RESUMO
We have experimentally demonstrated the extraordinarily high resolving power of liquid chromatography (LC) using a narrow open tubular (OT) column. In this work, we show that we can further increase its efficiency, peak capacity, and separation speed by elevating the operation (or column) temperature; all of these three numbers can be improved without mutual compromises. We use a mixture of five amino acids as a sample and show that we can increase the efficiency by 34%-260% and the separation speeds by 7%-10% by raising the operation temperature from 30 to 70 °C. When we use a 2 µm i.d. × 80 cm in length OT column coated with OTMS at a temperature of 70 °C, we can frequently obtain peak capacities of 700-800 within 20-30 min for separating cytochrome C digests. By increasing the column length to 160 cm, we can obtain a peak capacity of 2720 within 143 min for separating a complex peptide sample. This peak capacity is the highest peak capacity to date for one-dimensional LC separations. Importantly, heating the column is easy to implement and does not cost much, and many commercial LC systems already have compartments to control column temperatures. Running LC using a narrow OT column at an elevated temperature should broaden the applications of OT-LC in chemical and biochemical analyses.
RESUMO
Traditional Chinese multi-herb-combined prescriptions usually show better performance than a single agent since a group of effective compounds interfere multiple disease-relevant targets simultaneously. Huang-Lian-Jie-Du decoction is a remedy made of four herbs that are widely used to treat oral ulcers, gingivitis, and periodontitis. However, the active ingredients and underlying mechanisms are not clear. To address these questions, we prepared a water extract solution of Huang-Lian-Jie-Du decoction (HLJDD), called it as WEH (Water Extract Solution of HLJDD), and used it to treat LPS-induced systemic inflammation in mice. We observed that WEH attenuated inï¬ammatory responses including reducing production of cytokines, chemokines and interferons (IFNs), further attenuating emergency myelopoiesis, and preventing mice septic lethality. Upon LPS stimulation, mice pretreated with WEH increased circulating Ly6C- patrolling and splenic Ly6C+ inflammatory monocytes. The acute myelopoiesis related transcriptional factor profile was rearranged by WEH. Mechanistically we confirmed that WEH interrupted LPS/TLR4/CD14 signaling-mediated downstream signaling pathways through its nine principal ingredients, which blocked LPS stimulated divergent signaling cascades, such as activation of NF-κB, p38 MAPK, and ERK1/2. We conclude that the old remedy blunts LPS-induced "danger" signal recognition and transduction process at multiple sites. To translate our findings into clinical applications, we refined the crude extract into a pure multicomponent drug by directly mixing these nine chemical entities, which completely reproduced the effect of protecting mice from lethal septic shock. Finally, we reduced a large number of compounds within a multi-herb water extract to seven-chemical combination that exhibited superior therapeutic efficacy compared with WEH.
Assuntos
Medicamentos de Ervas Chinesas/uso terapêutico , Inflamação/tratamento farmacológico , Monócitos/efeitos dos fármacos , Extratos Vegetais/uso terapêutico , Fatores de Transcrição/efeitos dos fármacos , Animais , Reprogramação Celular/efeitos dos fármacos , Coptis chinensis , Medicamentos de Ervas Chinesas/administração & dosagem , Citometria de Fluxo , Regulação da Expressão Gênica/efeitos dos fármacos , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Microscopia de Fluorescência , Extratos Vegetais/administração & dosagem , Células RAW 264.7/efeitos dos fármacos , Fatores de Transcrição/metabolismoRESUMO
Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.
Assuntos
Impressão Molecular , Polímeros/análise , Extração em Fase Sólida , HumanosRESUMO
In many areas of application, key objectives of chemical separation and analysis are to minimize the sample quantity while maximizing the chemical information obtained. Increasing measurement sensitivity is especially critical for proteomics research, especially when processing trace samples and where multiple measurements are desired. A rich collection of technologies has been developed, but the resulting sensitivity remains insufficient for achieving in-depth coverage of proteomic samples as small as single cells. Here, we combine picoliter-scale liquid chromatography (picoLC) with mass spectrometry (MS) to address this issue. The picoLC employs a 2-µm-i.d. open tubular column to reduce the sample input needed to greatly increase the sensitivity achieved using electrospray ionization (ESI) with MS. With this picoLC-MS system, we show that we can identify â¼1000 proteins reliably using only 75 pg of tryptic peptides, representing a 10-100-fold sensitivity improvement compared with the state-of-the-art liquid chromatography (LC) or capillary electrophoresis (CE)-MS methods. PicoLC-MS extends the limit of separation science and is expected to be a powerful tool for single cell proteomics.
Assuntos
Peptídeos/análise , Proteômica , Cromatografia Líquida , Eletroforese Capilar , Células HeLa , Humanos , Espectrometria de Massas , Tamanho da Partícula , Análise de Célula Única , Propriedades de SuperfícieRESUMO
Separation speed and resolution are two important figures of merit in chromatography. Often, one gains the speed at the cost of the resolution, and vice versa. Scientists have employed short-packed columns for ultrafast separations but encountered challenges such as limited mobile phase velocity, extra-column effect caused band broadening, and column packing difficulty. We have recently demonstrated ultrahigh resolutions of narrow open tubular liquid chromatography (NOTLC); this allows us to trade some of the resolution for speed. In this work, we explored NOTLC for ultrafast LC separations. We used a 2.7 cm (effective length) narrow open tubular (NOT) column and showed a baseline separation of 6 amino acids in less than 700 ms. Ways to further increase the speed were discussed. Using short narrow open tubular (NOT) columns to perform ultrafast separation we overcame the challenges from using short packed columns. To demonstrate the feasibility of using this ultrafast separation technique for practical applications, we separated complex protein digests; peptides were nicely resolved in â¼1 min.
RESUMO
The advancements in life science research mandate effective tools capable of analyzing large numbers of samples with low quantities and high complexities. As an essential analytical tool for this research, liquid chromatography (LC) encounters an ever-increasing demand for enhanced resolving power, accelerated analysis speed, and reduced limit of detection. Although theoretical studies have indicated that open tubular (OT) columns can produce superior resolving power under comparable elution pressures and analysis times, ultrahigh-resolution and ultrahigh-speed open tubular liquid chromatography (OTLC) separations have never been reported. Here we present experimental results to demonstrate the predicted potential of this technique. We use a 2 µm i.d. × 75 cm long OT column coated with trimethoxy(octadecyl)silane for separating pepsin/trypsin digested E. coli lysates and routinely produce exceptionally high peak capacities (e.g., 1900-2000 in 3-5 h). We reduce the column length to 2.7 cm and exhibit the capability of OTLC for ultrafast separations. Under an elution pressure of 227.5 bar, we complete the separation of six amino acids in â¼800 ms and resolve these compounds within â¼400 ms. In addition, we show that OTLC has low attomole limits of detection (LOD) and each separation requires samples of only a few picoliters. Importantly, no ultrahigh elution pressures are required. With the ultrahigh resolution, ultrahigh speed, low LOD, and low sample volume requirement, OTLC can potentially be a powerful tool for biotech research, especially single cell analysis.
Assuntos
Aminoácidos/isolamento & purificação , Cromatografia Líquida de Alta Pressão/métodos , Escherichia coli/química , Peptídeos/isolamento & purificação , Cromatografia Líquida de Alta Pressão/instrumentação , Misturas Complexas/química , Limite de Detecção , Análise de Célula Única/instrumentação , Análise de Célula Única/métodos , Fatores de TempoRESUMO
Over the past few years, artificial enzymes have attracted enormous attention due to their high stabilities and cost-effective productions. In this work, metal-organic framework-derived SiW12@Co3O4 was synthesized in large quantities by stirring the mixture at ambient temperature and calcination. The obtained SiW12@Co3O4 exhibited a highly inherent peroxidase-like activity and excellent stability. Kinetic studies demonstrated that the synthesized SiW12@Co3O4 had a strong binding affinity to 3,3',5,5'-tetramethylbenzidine (TMB), stronger than HRP had. Specifically, the peroxidase-like activity of SiW12@Co3O4 in an aqueous solution was well maintained after incubation at an elevated temperature, at an extreme pH and for a long time. A SiW12@Co3O4-based method was further developed for H2O2 and one-pot glucose detection with good sensitivity and reliability. The facile synthesis approach is expected to facilitate the practical use of metal-organic frameworks and their derivatives as enzyme mimics in the future.
Assuntos
Glucose/análise , Peróxido de Hidrogênio/análise , Estruturas Metalorgânicas/química , Benzidinas/química , Colorimetria/métodos , Glucose/química , Glucose Oxidase/química , Peróxido de Hidrogênio/química , Limite de Detecção , Estruturas Metalorgânicas/síntese química , Oxirredução , Peroxidase/químicaRESUMO
We report that we can achieve extremely high separation efficiencies using a narrow, open, tubular (NOT) column for liquid-chromatographic separations, and we can carry out these separations under an elution pressure of no more than 50 bar. To improve the separation efficiency in packed-column liquid chromatography, one of the most effective approaches is to reduce the monodispersed-particle sizes. A direct consequence of reduced particle size is an increased elution pressure. High efficiencies have been obtained in ultrahigh-performance liquid chromatography (UPLC) using 1-2 µm or even submicron particles, and high elution pressures (greater than 1000 bar) are commonly used to carry out these separations. Open, tubular (OT) columns have been predicted to be the most efficient columns for high-efficiency liquid-chromatographic separations, as long as the column diameter is sufficiently small (1-2 µm). However, high efficiencies have not yet been publically reported, possibly because of the challenges (such as picoliter-volume detection, nanocapillary-column preparation, low sample loadability, etc.) of utilizing 1-2 µm diameter capillaries. In this paper, we show how we overcame these problems and achieved extremely high separation efficiencies using a 2 µm inner diameter capillary. We see 200+ apparent peaks with a peak capacity of 810 within 54 min when separating a sample from trypsin-digested cytochrome C, and we count 440 apparent peaks with a peak capacity of 1640 within 172 min when separating a sample from pepsin/trypsin-digested Escherichia coli cell lysate.
RESUMO
We report a great feature of open tubular liquid chromatography when it is run using an extremely narrow (e.g., 2 µm inner diameter) open tubular column: more than 10 million plates per meter can be achieved in less than 10 min and under an elution pressure of ca. 20 bar. The column is coated with octadecylsilane and both isocratic and gradient separations are performed. We reveal a focusing effect that may be used to interpret the efficiency enhancement. We also demonstrate the feasibility of using this technique for separating complex peptide samples. This high-resolution and fast separation technique is promising and can lead to a powerful tool for trace sample analysis.
RESUMO
Single-cell analysis has attracted increasing attention because of cell heterogeneities. Various strategies have been developed for analyzing single cells, but most of these analytical processes kill the cells. Tools that can qualitatively and quantitatively measure the cellular contents without killing the cell are highly demanding because they enable us to conduct single-cell time-course studies (e.g., to examine how a cell responds to a therapy before, during, and after a treatment). Here we develop a femto-liter (fL) pipet to serve this purpose. To ensure that we can accurately and precisely pipet fL solutions, we fill all conduits with liquid and use an electroosmotic pump (EOP) as the driving force to facilitate withdrawal of cellular contents from single cells. We tentatively term this device an EOP-driven pipette or EDP. We characterize the EDP for accurately and precisely withdrawing solution from â¼250 fL to 80 nL; a volume range that covers the applications for most types of cells. To demonstrate the feasibility of utilizing the EDP for a single-cell time-course study, we utilize the EDP to take the cellular contents out at different times during the course of a zebrafish embryo development for cholesterol measurements. More than 50% of the embryos survive after each pipetting and analysis step, and this number will increase considerably as we improve our cell manipulation skills and reduce the pipet-tip diameter. We expect this EDP to become an effective tool for single-cell time-course studies.
Assuntos
Colesterol/análise , Eletro-Osmose/métodos , Embrião não Mamífero/metabolismo , Animais , Eletro-Osmose/instrumentação , Análise de Célula Única , Peixe-ZebraRESUMO
We discuss the construction and performance of a high-performance liquid chromatography cartridge that we developed that resulted from a culmination of previous research. We have recently developed an innovative approach to creating gradient elutions using dual electroosmotic pumps and a series of three valves. This method has been proved to be the most reproducible and robust in producing gradients compared to our previously tested methods. Using this approach, we have assembled a high-performance liquid chromatography cartridge powered and controlled via a computer. We have successfully coupled the cartridge with an ultraviolet absorbance detector and a mass spectrometer for separating complex protein/peptide samples. The cartridge is readily coupled with other detectors such as electrochemical detector and laser-induced fluorescence detector.
Assuntos
Cromatografia Líquida de Alta Pressão , Espectrometria de Massas , Peptídeos/análise , Proteínas/análise , Espectrofotometria Ultravioleta , Eletro-OsmoseRESUMO
In this paper, we develop a simple electrokinetic means for fractionating protein samples according to their pI values without using ampholytes. The method uses inexpensive equipment, and its consumables are primarily ammonium acetate buffers. A key component of its apparatus is a dialysis membrane interface that eliminates electrolysis-caused protein oxidation/reduction and constrains proteins in the desired places. We demonstrate its feasibility for fractionating standard proteins and real-world samples. With the elimination of ampholytes, we can analyze the fractionated proteins directly by a matrix assisted laser desorption/ionization time-of-flight mass spectrometer. Important experimental parameters are also discussed in order to obtain good fractionation results.
Assuntos
Focalização Isoelétrica/instrumentação , Proteínas/isolamento & purificação , Acetatos/química , Fracionamento Químico/instrumentação , Fracionamento Químico/métodos , Desenho de Equipamento , Células HeLa , Humanos , Focalização Isoelétrica/métodos , Ponto Isoelétrico , OxirreduçãoRESUMO
Multiplex polymerase chain reaction (PCR) has been widely utilized for high-throughput pathogen identification. Often, a dye is used to intercalate the amplified DNA fragments, and identifications of the pathogens are carried out by DNA melting curve analysis or gel electrophoresis. Integrating DNA amplification and identification is a logic path toward maximizing the benefit of multiplex PCR. Although PCR and gel electrophoresis have been integrated, replenishing the gels after each run is tedious and time-consuming. In this technical note, we develop an approach to address this issue. We perform multiplex PCR inside a capillary, transfer the amplified fragments to a bare narrow capillary, and measure their lengths online using bare narrow capillary-hydrodynamic chromatography (BaNC-HDC), a new technique recently developed in our laboratory for free-solution DNA separation. To intercalate the DNA with YOYO-1 (a fluorescent dye) for BaNC-HDC, we flush the capillary column with a YOYO-1 solution; positively charged YOYO-1 is adsorbed (or charged) onto the negatively charged capillary wall. As DNA molecules are driven down the column for separation, they react with the YOYO-1 stored on the capillary wall and are online-intercalated with the dye. With a single YOYO-1 charging, the column can be used for more than 40 runs, although the fluorescence signal intensities of the DNA peaks decrease gradually. Although the dye-DNA intercalation occurs during the separation, it does not affect the retention times, separation efficiencies, or resolutions.
Assuntos
Benzoxazóis/química , Eletrocromatografia Capilar/instrumentação , DNA/análise , Corantes Fluorescentes/química , Substâncias Intercalantes/química , Reação em Cadeia da Polimerase Multiplex/instrumentação , Compostos de Quinolínio/química , Desenho de Equipamento , HidrodinâmicaRESUMO
High-performance liquid chromatography (HPLC) plays an important role in biotechnology, and a majority of chromatographic separations use gradient elution. While gradient generators can be built in different formats, binary pumps or quaternary pumps are most frequently used for gradient generator constructions. We have recently developed a high-pressure electroosmotic pump (EOP); the pump can be manufactured at a cost of a few hundred dollars. However, it is challenging to use this pump to deliver a gradient eluent directly. In this study, we first improve the monolith preparation by applying a pressure to the monomer solution during polymerization. We assemble a binary EOP gradient generator and discuss the relationship between the gradient profile and voltage applied to the EOP. We demonstrate the feasibility of the binary EOP gradient generator for generating a smooth and reproducible nanoflow gradient. After integration of the gradient generator into a miniaturized HPLC system, we use the HPLC system for separating peptide mixtures from trypsin-digested proteins. The performance comparison between the above miniaturized HPLC system and an Agilent 1200 HPLC system exhibits comparable efficiencies, resolutions, and peak capacities.
RESUMO
Here, we construct an open-channel on-chip electroosmotic pump capable of generating pressures up to â¼170 bar and flow rates up to â¼500 nL/min, adequate for high performance liquid chromatographic (HPLC) separations. A great feature of this pump is that a number of its basic pump units can be connected in series to enhance its pumping power; the output pressure is directly proportional to the number of pump units connected. This additive nature is excellent and useful, and no other pumps can work in this fashion. We demonstrate the feasibility of using this pump to perform nanoflow HPLC separations; tryptic digests of bovine serum albumin (BSA), transferrin factor (TF), and human immunoglobulins (IgG) are utilized as exemplary samples. We also compare the performance of our electroosmotic (EO)-driven HPLC with Agilent 1200 HPLC; comparable efficiencies, resolutions, and peak capacities are obtained. Since the pump is based on electroosmosis, it has no moving parts. The common material and process also allow this pump to be integrated with other microfabricated functional components. Development of this high-pressure on-chip pump will have a profound impact on the advancement of lab-on-a-chip devices.
Assuntos
Eletro-Osmose/métodos , Dispositivos Lab-On-A-Chip , Nanotecnologia/métodos , Animais , Bovinos , Cromatografia Líquida de Alta Pressão/instrumentação , Cromatografia Líquida de Alta Pressão/métodos , Eletro-Osmose/instrumentação , Humanos , Imunoglobulina G/análise , Nanotecnologia/instrumentação , Soroalbumina Bovina/análiseRESUMO
Determining the sizes and measuring the quantities of DNA molecules are fundamental tasks in molecular biology. DNA sizes are usually evaluated by gel electrophoresis, but this method cannot simultaneously size and quantitate a DNA at low zeptomole (zmol) levels of concentration. We have recently developed a new technique, called bare-narrow-capillary/hydrodynamic-chromatography or BaNC-HDC, for resolving DNA based on their sizes without using any sieving matrices. In this report, we utilize BaNC-HDC for measuring the sizes and quantities of DNA fragments at zmol to several-molecule levels of concentration. DNA ranging from a few base pairs to dozens of kilo base pairs are accurately sized and quantitated at a throughput of 15â samples per hour, and each sample contains dozens of DNA strands of different lengths. BaNC-HDC can be a cost-effective means and an excellent tool for high-throughput DNA sizing and quantitation at extremely low quantity level.
Assuntos
Cromatografia/instrumentação , DNA/análise , Cromatografia/economia , Desenho de Equipamento , HidrodinâmicaRESUMO
Large-size spherical sorbents with particle size of 10-50 µm are widely applied in separation fields, however it is still a great challenge to synthesize such large-size spherical covalent organic framework (COF). In this work, a type of large-size porous 3D COF was size-controablly synthesized via a two-step strategy, in which a large-size porous 3D spherical polymer was prepared first through a Pickering emulsion polymerization using nano silica as the stabilizer, and subsequently it was converted into porous spherical 3D COF by a solvothermal method. The as-prepared porous spherical COF (COF-320 as a model) showed size-controllable uniform spherical morphology within 15-45 µm, large specific surface area, fine crystalline structure, and good chemical stability. When used as the sorbent for dispersive solid-phase extraction (d-SPE) of bisphenol F (BPF), the porous spherical COF-320 (15 µm) displayed high adsorption capacity (Qmax = 335.6 mg/g), high enrichment factor (80 folds), and good reusability (at least five cycles). By coupling the d-SPE method to HPLC, a new analytical approach was developed and successfully applied to the determination of trace BPF in two water samples, an orange juice and a standard sample with recoveries of 96.0-102.2 % (RSD = 1.1-1.5 %), 95.7-97.4 % (RSD = 1.4-4.4 %) and 98.7 % (RSD = 2.3 %), respectively. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were 0.1 and 0.3 ng/mL, respectively. The new synthesis strategy opens a viable way to prepare large-size porous spherical COFs, and the developed analytical method can be potentially applied to sensitively detect the trace BPF in water samples and beverages.
RESUMO
BACKGROUND: Covalent organic frameworks (COFs) have found promising applications in separation fields due to their large surface area and high adsorption capacity, but the exiting COFs can not be directly used as the packing materials of on-line solid-phase extraction (SPE) coupled to HPLC and HPLC because their nano/submicron size or irregular shapes might cause ultrahigh column back pressure and low column efficiency. To synthesize the large-size spherical COFs larger than 3 µm as sorbents might be able to address these problems, however it is still a great challenge till now. RESULTS: In this work, two large-size spherical 3D COFs (COF-320 and COF-300) were size-controllably synthesized within 10-90 µm via a two-step strategy. These two spherical COFs showed large surface area, fine crystallinity, good chemical/mechanical stability, and good reproducibility. As an application case, when used as the on-line SPE sorbents coupled to HPLC, the large-size spherical COF-320 displayed high binding capacity for bisphenol F (Qmax of 452.49 mg/g), low column back pressure (6-8 psi at flow rate of 1 mL/min), and good reusability (at least 30 cycles). The developed on-line-SPE-HPLC-UV method presented good analytical performance with enrichment factor of 667 folds, linear range of 1.0-400 ng/mL, limit of detection (LOD, S/N = 3) of 0.3 ng/mL, limit of quantification (LOQ, S/N = 10) of 1.0 ng/mL, and recoveries of 100.3-103.2 % (RSDs of 2.0-3.5 %) and 95.2-97.0 % (RSDs of 4.3-5.6 %) for tap water and lake water samples, respectively. SIGNIFICANCE: This is the first case to synthesize the large-size spherical COFs within 10-90 µm, and this work made it possible to directly use COFs as the filling materials of on-line SPE coupled to HPLC and HPLC. The developed analytical method can be potentially applied to the rapid and sensitive detection of trace bisphenol F in environmental water samples.
RESUMO
In this technical note, we design and fabricate a novel rotary valve and demonstrate its feasibility for performing isoelectric focusing and simultaneous fractionation of proteins, followed by sodium dodecyl-polyacrylamide gel electrophoresis. The valve has two positions. In one position, the valve routes a series of capillary loops together into a single capillary tube where capillary isoelectric focusing (CIEF) is performed. By switching the valve to another position, the CIEF-resolved proteins in all capillary loops are isolated simultaneously, and samples in the loops are removed and collected in vials. After the collected samples are briefly processed, they are separated via sodium dodecyl-polyacrylamide gel electrophoresis (SDS-PAGE, the second-D separation) on either a capillary gel electrophoresis instrument or a slab-gel system. The detailed valve configuration is illustrated, and the experimental conditions and operation protocols are discussed.