Salt-Assisted Selective Growth of H-phase Monolayer VSe2 with Apparent Hole Transport Behavior.

Vanadium diselenide (VSe2) exhibits versatile electronic and magnetic properties in the trigonal prismatic (H-) and octahedral (T-) phases. Compared to the metallic T-phase, the H-phase with a tunable semiconductor property is predicted to be a ferrovalley material with spontaneous valley polarization. Herein we report an epitaxial growth of the monolayer 2D VSe2 on a mica substrate via the chemical vapor deposition (CVD) method by introducing salt in the precursor. Our first-principles calculations suggest that the monolayer H-phase VSe2 with a large lateral size is thermodynamically favorable. The honeycomb-like structure and the broken symmetry are directly observed by spherical aberration-corrected scanning transmission electron microscopy (STEM) and confirmed by giant second harmonic generation (SHG) intensity. The p-type transport behavior is further evidenced by the temperature-dependent resistance and field-effect device study. The present work introduces a new phase-stable 2D transition metal dichalcogenide, opening the prospect of novel electronic and spintronics device design.

China Medicinal Plants of the Ampelopsis grossedentata-A Review of Their Botanical Characteristics, Use, Phytochemistry, Active Pharmacological Components, and Toxicology.

Ampelopsis grossedentata (AG) is mainly distributed in Chinese provinces and areas south of the Yangtze River Basin. It is mostly concentrated or scattered in mountainous bushes or woods with high humidity. Approximately 57 chemical components of AG have been identified, including flavonoids, phenols, steroids and terpenoids, volatile components, and other chemical components. In vitro studies have shown that the flavone of AG has therapeutic properties such as anti-bacteria, anti-inflammation, anti-oxidation, enhancing immunity, regulating glucose and lipid metabolism, being hepatoprotective, and being anti-tumor with no toxicity. Through searching and combing the related literature, this paper comprehensively and systematically summarizes the research progress of AG, including morphology, traditional and modern uses, chemical composition and structure, and pharmacological and toxicological effects, with a view to providing references for AG-related research.

Unexpected low thermal expansion coefficients of pentadiamond.

A new carbon allotrope, pentadiamond, was recently reported in the literature. Herein, we investigate its thermal expansion and thermoelastic properties by first principles. It is observed that the bulk modulus and hardness of pentadiamond are far less than those of diamond, but the thermal expansion of pentadiamond is lower than that of diamond in the range of 0 K to 2000 K, and even negative in the temperature range of 0-190 K. The negative thermal expansion at low temperature originates from the transverse vibrations of the edge-shared atoms in the coplanar double-pentagon. The low thermal expansion at high temperature is contributed by the strong bonds in pentadiamond. Benefiting from the low thermal expansion, the elastic constants of pentadiamond decrease very slowly with respect to temperature compared with those of diamond. The low sensitivity of thermodynamic and thermoelastic properties to temperature makes pentadiamond a promising material for high anti-thermal-shock and accurate electronic device applications.

Preferential uptake of antibody targeted calcium phosphosilicate nanoparticles by metastatic triple negative breast cancer cells in co-cultures of human metastatic breast cancer cells plus bone osteoblasts.

Calcium phosphosilicate nanoparticles (CPSNPs) are bioresorbable nanoparticles that can be bioconjugated with targeting molecules and encapsulate active agents and deliver them to tumor cells without causing damage to adjacent healthy tissue. Data obtained in this study demonstrated that an anti-CD71 antibody on CPSNPs targets these nanoparticles and enhances their internalization by triple negative breast cancer cells in-vitro. Caspase 3,7 activation, DNA damage, and fluorescent microscopy confirmed the apoptotic breast cancer response caused by targeted anti-CD71-CPSNPs encapsulated with gemcitabine monophosphate, the active metabolite of the chemotherapeutic gemcitabine used to treat cancers including breast and ovarian. Targeted anti-CD71-CPSNPs encapsulated with the fluorophore, Rhodamine WT, were preferentially internalized by breast cancer cells in co-cultures with osteoblasts. While osteoblasts partially internalized anti-CD71-GemMP-CPSNPs, their cell growth was not affected. These results suggest that CPSNPs may be used as imaging tools and selective drug delivery systems for breast cancer that has metastasized to bone.

Control of Epitaxial BaFe2As2 Atomic Configurations with Substrate Surface Terminations.

Atomic layer controlled growth of epitaxial thin films of unconventional superconductors opens the opportunity to discover novel high temperature superconductors. For instance, the interfacial atomic configurations may play an important role in superconducting behavior of monolayer FeSe on SrTiO3 and other Fe-based superconducting thin films. Here, we demonstrate a selective control of the atomic configurations in Co-doped BaFe2As2 epitaxial thin films and its strong influence on superconducting transition temperatures by manipulating surface termination of (001) SrTiO3 substrates. In a combination of first-principles calculations and high-resolution scanning transmission electron microscopy imaging, we show that Co-doped BaFe2As2 on TiO2-terminated SrTiO3 is a tetragonal structure with an atomically sharp interface and with an initial Ba layer. In contrast, Co-doped BaFe2As2 on SrO-terminated SrTiO3 has a monoclinic distortion and a BaFeO3- x initial layer. Furthermore, the superconducting transition temperature of Co-doped BaFe2As2 ultrathin films on TiO2-terminated SrTiO3 is significantly higher than that on SrO-terminated SrTiO3, which we attribute to shaper interfaces with no lattice distortions. This study allows the design of the interfacial atomic configurations and the effects of the interface on superconductivity in Fe-based superconductors.

Tuning Phase Transitions in 1T-TaS2 via the Substrate.

Phase transitions in 2D materials can lead to massive changes in electronic properties that enable novel electronic devices. Tantalum disulfide (TaS2), specifically the "1T" phase (1T-TaS2), exhibits a phase transition based on the formation of commensurate charge density waves (CCDW) at 180 K. In this work, we investigate the impact of substrate choice on the phase transitions in ultrathin 1T-TaS2. Doping and charge transfer from the substrate has little impact on CDW phase transitions. On the contrary, we demonstrated that substrate surface roughness is a primary extrinsic factor in CCDW transition temperature and hysteresis, where higher roughness leads to smaller transition hysteresis. Such roughness can be simulated via surface texturing of SiO2/Si substrates, which controllably and reproducibly induces periodic strain in the 1T-TaS2 and thereby enables the potential for engineering CDW phase transitions.

A hybrid functional study of native point defects in Cu2SnS3: implications for reducing carrier recombination.

The native point defects in the earth-abundant solar material Cu2SnS3 are studied using the hybrid functional. To generate more accurate formation energies of defects, the extended Freysoldt, Neugebauer, and Van de Walle (FNV) method is used for finite-size corrections in the charged supercell calculations. According to the calculated defect energetics, it is found that the usual experimental conditions can lead to abundant deep centers that deteriorate solar cell performance. To reduce the carrier recombination caused by the deep centers, Sn-rich and S-poor conditions should be attempted. The present calculations also give satisfactory explanations for a recent experimental work on the defect levels in Cu2SnS3.

Lateral Versus Vertical Growth of Two-Dimensional Layered Transition-Metal Dichalcogenides: Thermodynamic Insight into MoS2.

Unprecedented interest has been spurred recently in two-dimensional (2D) layered transition metal dichalcogenides (TMDs) that possess tunable electronic and optical properties. However, synthesis of a wafer-scale TMD thin film with controlled layers and homogeneity remains highly challenging due mainly to the lack of thermodynamic and diffusion knowledge, which can be used to understand and design process conditions, but falls far behind the rapidly growing TMD field. Here, an integrated density functional theory (DFT) and calculation of phase diagram (CALPHAD) modeling approach is employed to provide thermodynamic insight into lateral versus vertical growth of the prototypical 2D material MoS2. Various DFT energies are predicted from the layer-dependent MoS2, 2D flake-size related mono- and bilayer MoS2, to Mo and S migrations with and without graphene and sapphire substrates, thus shedding light on the factors that control lateral versus vertical growth of 2D islands. For example, the monolayer MoS2 flake in a small 2D lateral size is thermodynamically favorable with respect to the bilayer counterpart, indicating the monolayer preference during the initial stage of nucleation; while the bilayer MoS2 flake becomes stable with increasing 2D lateral size. The critical 2D flake-size of phase stability between mono- and bilayer MoS2 is adjustable via the choice of substrate. In terms of DFT energies and CALPHAD modeling, the size dependent pressure-temperature-composition (P-T-x) growth windows are predicted for MoS2, indicating that the formation of MoS2 flake with reduced size appears in the middle but close to the lower T and higher P "Gas + MoS2" phase region. It further suggests that Mo diffusion is a controlling factor for MoS2 growth owing to its extremely low diffusivity compared to that of sulfur. Calculated MoS2 energies, Mo and S diffusivities, and size-dependent P-T-x growth windows are in good accord with available experiments, and the present data provide quantitative insight into the controlled growth of 2D layered MoS2.

Bonding charge density from atomic perturbations.

Charge transfer among individual atoms is the key concept in modern electronic theory of chemical bonding. In this work, we present a first-principles approach to calculating the charge transfer. Based on the effects of perturbations of an individual atom or a group of atoms on the electron charge density, we determine unambiguously the amount of electron charge associated with a particular atom or a group of atoms. We computed the topological electron loss versus gain using ethylene, graphene, MgO, and SrTiO3 as examples. Our results verify the nature of chemical bonds in these materials at the atomic level.

Atomic-Level Mechanisms of Nucleation of Pure Liquid Metals during Rapid Cooling.

To obtain a material with the desired performance, the atomic-level mechanisms of nucleation from the liquid to solid phase must be understood. Although this transition has been investigated experimentally and theoretically, its atomic-level mechanisms remain debatable. In this work, the nucleation mechanisms of pure Fe under rapid cooling conditions are investigated. The local atomic packing stability and liquid-to-solid transition-energy pathways of Fe are studied using molecular dynamics simulations and first-principle calculations. The results are expressed as functions of cluster size in units of amorphous clusters (ACs) and body-centered cubic crystalline clusters (BCC-CCs). We found the prototypes of ACs in supercooled liquids and successfully divided these ACs to three categories according to their transition-energy pathways. The information obtained in this study could contribute to our current understanding of the crystallization of metallic melts during rapid cooling.

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system.

A thermodynamic database for the Al-Co-Cr-Ni system is built via the Calphad method by extrapolating re-assessed ternary subsystems. A minimum number of quaternary parameters are included, which are optimized using experimental phase equilibrium data obtained by electron probe micro-analysis and x-ray diffraction analysis of NiCoCrAlY alloys spanning a wide compositional range, after annealing at 900 °C, 1100 °C and 1200 °C, and water quenching. These temperatures are relevant to oxidation and corrosion resistant MCrAlY coatings, where M corresponds to some combination of nickel and cobalt. Comparisons of calculated and measured phase compositions show excellent agreement for the ß-γ equilibrium, and good agreement for three-phase ß-γ-σ and ß-γ-α equilibria. An extensive comparison with existing Ni-base databases (TCNI6, TTNI8, NIST) is presented in terms of phase compositions.

Anti-inflammatory properties of kaempferol via its inhibition of aldosterone signaling and aldosterone-induced gene expression.

Osteopontin (OPN), also called cytokine Eta-1, is a pro-inflammatory cytokine. Recent studies have shown that aldosterone increases OPN gene expression in endothelial cells. As a flavonoid compound, kaempferol has potent anti-inflammatory properties, but whether kaempferol regulates aldosterone signaling and aldosterone-induced gene expression is still unknown. Human umbilical vein endothelial cells (HUVECs) were pretreated with kaempferol (0, 1, 3, or 10 µmol/L) for 1 h prior to exposure to aldosterone (10(-6) mol/L) for 24 h. Aldosterone induced generation of reactive oxygen species; OPN and cluster of differentiation 44 gene expression; phospho-p38 MAPK and NF-κB binding activity. The effect of aldosterone was abrogated by kaempferol and spironolactone (10(-6) mol/L). The present results suggest that kaempferol exerts its anti-inflammatory properties via its inhibition of aldosterone signaling and aldosterone-induced gene expression in HUVECs.

Seroprevalence and molecular detection of porcine sapovirus in symptomatic suckling piglets in Guangdong Province, China.

The seroprevalence and genetic identification of sapovirus (SaV) in symptomatic suckling piglets were investigated in Guangdong Province, China, between November 2011 and April 2013. Serum (n = 960) and diarrheic fecal (n = 101) samples collected from symptomatic suckling piglets in Guangdong Province were evaluated for antibodies against SaV using indirect enzyme-linked immunosorbent assay (iELISA). The overall seroprevalence of SaV in symptomatic suckling piglets was 61.9 % (594/960). Positive animals were found in all regions with seroprevalence ranging from 52 to 67.8 %, but the difference was not statistically significant (P > 0.05). In addition, RNA of SaV was extracted from diarrheic fecal samples, and the partial polymerase gene was amplified by RT-PCR and then sequenced. Seven of 101 (6.9 %) samples were found to contain porcine SaV. Phylogenetic analysis showed that all the porcine SaV isolates belong to the porcine SaV genogroup III (GIII). This is the first report of SaV seroprevalence in symptomatic pigs in China.

Quantitative predictive theories through integrating quantum, statistical, equilibrium, and nonequilibrium thermodynamics.

Today's thermodynamics is largely based on the combined law for equilibrium systems and statistical mechanics derived by Gibbs in 1873 and 1901, respectively, while irreversible thermodynamics for nonequilibrium systems resides essentially on the Onsager Theorem as a separate branch of thermodynamics developed in 1930s. Between them, quantum mechanics was invented and quantitatively solved in terms of density functional theory (DFT) in 1960s. These three scientific domains operate based on different principles and are very much separated from each other. In analogy to the parable of the blind men and the elephant articulated by Perdew, they individually represent different portions of a complex system and thus are incomplete by themselves alone, resulting in the lack of quantitative agreement between their predictions and experimental observations. Over the last two decades, the author's group has developed a multiscale entropy approach (recently termed as zentropy theory) that integrates DFT-based quantum mechanics and Gibbs statistical mechanics and is capable of accurately predicting entropy and free energy of complex systems. Furthermore, in combination with the combined law for nonequilibrium systems presented by Hillert, the author developed the theory of cross phenomena beyond the phenomenological Onsager Theorem. The zentropy theory and theory of cross phenomena jointly provide quantitative predictive theories for systems from electronic to any observable scales as reviewed in the present work.

Decarboxylative Aminomethylation of Indole-3-carboxylic Acids via Strain Release-Driven Ring Opening of 1,2-Oxazetidines.

A copper-catalyzed decarboxylative aminomethylation of indole-3-carboxylic acids with 1,2-oxazetidines has been developed, enabling the rapid synthesis of structurally diverse 3-aminomethylindoles in good to excellent yields. Remarkably, an unprecedented decarboxylative aminomethylation/cyclization cascade was further achieved by a combination of copper and iron salts to construct complex γ-carbolines with high efficiency. It is worth noting that one of the obtained products proved to be a good dual-emissive luminogen, exhibiting both aggregation-caused quenching and aggregation-induced emission.

Electronic-grade epitaxial (111) KTaO3 heterostructures.

KTaO3 heterostructures have recently attracted attention as model systems to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating heterostructure interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on high-quality epitaxial (111) KTaO3 thin films using an adsorption-controlled hybrid PLD to overcome the vapor pressure mismatch. Electrical and structural characterizations reveal that the higher-quality heterostructure interface between amorphous LaAlO3 and KTaO3 thin films supports a two-dimensional electron gas with substantially higher electron mobility, superconducting transition temperature, and critical current density than that in bulk single-crystal KTaO3-based heterostructures. Our hybrid approach may enable epitaxial growth of other alkali metal-based oxides that lie beyond the capabilities of conventional methods.

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange.

The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development.

BiFeO3 domain wall energies and structures: a combined experimental and density functional theory+U study.

We determined the atomic structures and energies of 109°, 180°, and 71° domain walls in BiFeO3, combining density functional theory+U calculations and aberration-corrected transmission electron microscopy images. We find a substantial Bi sublattice shift and a rather uniform Fe sublattice across the walls. The calculated wall energies (γ) follow the sequence γ109<γ180<γ71 for the 109°, 180°, and 71° walls. We attribute the high 71° wall energy to an opposite tilting rotation of the oxygen octahedra and the low 109° wall energy to the opposite twisting rotation of the oxygen octahedra across the domain walls.

Radical Phosphorylation of Aliphatic C-H Bonds via Iron Photocatalysis.

The synthesis of tertiary phosphines(III) has been a long-standing challenge in synthetic chemistry because of inevitable issues including harsh conditions, sensitive organometallic reagents, and prefunctionalized substrates in traditional synthesis. Herein, we report a strategically novel C(sp3)-H bond phosphorylation that enables the assembly of structurally diverse tertiary phosphines(III) from industrial phosphine(III) sources under mild photocatalytic conditions. The merger of ligand-to-metal charge transfer (LMCT) of FeCl3 with the hydrogen atom-transfer (HAT) process is the key for the generation of alkyl radicals from hydrocarbons. Strikingly, this catalytic system can be successfully applied for the polymerization of electron-deficient alkenes.