Water-responsive supercontractile polymer films for bioelectronic interfaces.

Connecting different electronic devices is usually straightforward because they have paired, standardized interfaces, in which the shapes and sizes match each other perfectly. Tissue-electronics interfaces, however, cannot be standardized, because tissues are soft1-3 and have arbitrary shapes and sizes4-6. Shape-adaptive wrapping and covering around irregularly sized and shaped objects have been achieved using heat-shrink films because they can contract largely and rapidly when heated7. However, these materials are unsuitable for biological applications because they are usually much harder than tissues and contract at temperatures higher than 90 °C (refs. 8,9). Therefore, it is challenging to prepare stimuli-responsive films with large and rapid contractions for which the stimuli and mechanical properties are compatible with vulnerable tissues and electronic integration processes. Here, inspired by spider silk10-12, we designed water-responsive supercontractile polymer films composed of poly(ethylene oxide) and poly(ethylene glycol)-α-cyclodextrin inclusion complex, which are initially dry, flexible and stable under ambient conditions, contract by more than 50% of their original length within seconds (about 30% per second) after wetting and become soft (about 100 kPa) and stretchable (around 600%) hydrogel thin films thereafter. This supercontraction is attributed to the aligned microporous hierarchical structures of the films, which also facilitate electronic integration. We used this film to fabricate shape-adaptive electrode arrays that simplify the implantation procedure through supercontraction and conformally wrap around nerves, muscles and hearts of different sizes when wetted for in vivo nerve stimulation and electrophysiological signal recording. This study demonstrates that this water-responsive material can play an important part in shaping the next-generation tissue-electronics interfaces as well as broadening the biomedical application of shape-adaptive materials.

Closed-loop recyclable membranes enabled by covalent adaptable networks for water purification.

In the state-of-the-art membrane industry, membranes have linear life cycles and are commonly disposed of by landfill or incineration, sacrificing their sustainability. To date, little or no thought is given in the design phase to the end-of-life management of membranes. For the first time, we have innovated high-performance sustainable membranes, which can be closed-loop recycled after long-term usage for water purification. By synergizing membrane technology and dynamic covalent chemistry, covalent adaptable networks (CANs) with thermally reversible Diels-Alder (DA) adducts were synthesized and employed to fabricate integrally skinned asymmetric membranes via the nonsolvent-induced phase separation technique. Due to the stable and reversible features of CAN, the closed-loop recyclable membranes exhibit excellent mechanical properties and thermal and chemical stabilities as well as separation performance, which are comparable to or even higher than the state-of-the-art nonrecyclable membranes. Moreover, the used membranes can be closed-loop recycled with consistent properties and separation performance by depolymerization to remove contaminants, followed by refabrication into new membranes through the dissociation and reformation of DA adducts. This study may fill in the gaps in closed-loop recycling of membranes and inspire the advancement of sustainable membranes for a green membrane industry.

Recyclable, Malleable, and Strong Thermosets Enabled by Knoevenagel Adducts.

Plastic recycling is critical for waste management and achieving a circular economy, but it entails difficult trade-offs between performance and recyclability. Here, we report a thermoset, poly(α-cyanocinnamate) (PCC), synthesized using Knoevenagel condensation between terephthalaldehyde (TPA) and a triarm cyanoacetate star, that tackles this difficulty by harnessing its intrinsically conjugated and dynamic chemical characteristics. PCCs exhibit extraordinary thermal and mechanical properties with a typical Tg of ∼178 °C, Young's modulus of 3.8 GPa, and tensile strength of 102 MPa, along with remarkable flexibility and dimensional and chemical stabilities. Furthermore, end-of-life PCCs can be selectively degraded and partially recycled back into one starting monomer TPA for a new production cycle or reprocessed through dynamic exchange aided by cyanoacetate chain-ends. This study lays the scientific groundwork for the design of robust and recyclable thermosets, with transformative potential in plastic engineering.

Engineering High Voltage Aqueous Aluminum-Ion Batteries.

The energy transition to renewables necessitates innovative storage solutions beyond the capacities of lithium-ion batteries. Aluminum-ion batteries (AIBs), particularly their aqueous variants (AAIBs), have emerged as potential successors due to their abundant resources, electrochemical advantages, and eco-friendliness. However, they grapple with achieving their theoretical voltage potential, often yielding less than expected. This perspective article provides a comprehensive examination of the voltage challenges faced by AAIBs, attributing gaps to factors such as the aluminum reduction potential, hydrogen evolution reaction, and aluminum's inherent passivation. Through a critical exploration of methodologies, strategies, such as underpotential deposition, alloying, interface enhancements, tailored electrolyte compositions, and advanced cathode design, are proposed. This piece seeks to guide researchers in harnessing the full potential of AAIBs in the global energy storage landscape.

Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future.

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

Ionogels: recent advances in design, material properties and emerging biomedical applications.

Ionic liquid (IL)-based gels (ionogels) have received considerable attention due to their unique advantages in ionic conductivity and their biphasic liquid-solid phase property. In ionogels, the negligibly volatile ionic liquid is retained in the interconnected 3D pore structure. On the basis of these physical features as well as the chemical properties of well-chosen ILs, there is emerging interest in the anti-bacterial and biocompatibility aspects. In this review, the recent achievements of ionogels for biomedical applications are summarized and discussed. Following a brief introduction of the various types of ILs and their key physicochemical and biological properties, the design strategies and fabrication methods of ionogels are presented by means of different confining networks. These sophisticated ionogels with diverse functions, aimed at biomedical applications, are further classified into several active domains, including wearable strain sensors, therapeutic delivery systems, wound healing and biochemical detections. Finally, the challenges and possible strategies for the design of future ionogels by integrating materials science with a biological interface are proposed.

Lanthanide-Nucleotide Coordination Nanoparticles for STING Activation.

Activation of the stimulator of interferon genes (STING) is essential for blocking viral infections and eliciting antitumor immune responses. Local injection of synthetic STING agonists, such as 2'3'-cGAMP [cGAMP = cyclic 5'-guanosine monophosphate (cGMP)-adenosine monophosphate (AMP)], is a promising approach to enhance antiviral functions and cancer immunotherapy. However, the application of such agonists has been hindered by complicated synthetic procedures, high doses, and unsatisfactory systemic immune responses. Herein, we report the design and synthesis of a series of 2'3'-cGAMP surrogates in nanoparticle formulations formed by reactions of AMP, GMP, and coordinating lanthanides. These nanoparticles can stimulate the type-I interferon (IFN) response in both mouse macrophages and human monocytes. We further demonstrate that the use of europium-based nanoparticles as STING-targeted adjuvants significantly promotes the maturation of mouse bone-marrow-derived dendritic cells and major histocompatibility complex class I antigen presentation. Dynamic molecular docking analysis revealed that these nanoparticles bind with high affinity to mouse STING and human STING. Compared with soluble ovalbumin (OVA), subcutaneously immunized europium-based nanovaccines exhibit significantly increased production of primary and secondary anti-OVA antibodies (∼180-fold) in serum, as well as IL-5 (∼28-fold), IFN-γ (∼27-fold), and IFN-α/ß (∼4-fold) in splenocytes ex vivo. Compared with the 2'3'-cGAMP/OVA formulation, subcutaneous administration of nanovaccines significantly inhibits B16F10-OVA tumor growth and prolongs the survival of tumor-bearing mice in both therapeutic and protective models. Given the rich supramolecular chemistry with lanthanides, this work will enable a readily accessible platform for potent humoral and cellular immunity while opening new avenues for cost-effective, highly efficient therapeutic delivery of STING agonists.

Injectable Hybrid-Crosslinked Hydrogels as Fatigue-Resistant and Shape-Stable Skin Depots.

Injectable hydrogels have gained considerable attention, but they are typically mechanically weak and subject to repeated physiological stresses in the body. Herein, we prepared polyurethane diacrylate (EPC-DA) hydrogels, which are injectable and can be photocrosslinked into fatigue-resistant implants. The mechanical properties can be tuned by changing photocrosslinking conditions, and the hybrid-crosslinked EPC-DA hydrogels exhibited high stability and sustained release properties. In contrast to common injectable hydrogels, EPC-DA hydrogels exhibited excellent antifatigue properties with >90% recovery during cyclic compression tests and showed shape stability after application of force and immersion in an aqueous buffer for 35 days. The EPC-DA hydrogel formed a shape-stable hydrogel depot in an ex vivo porcine skin model, with establishment of a temporary soft gel before in situ fixing by UV crosslinking. Hybrid crosslinking using injectable polymeric micelles or nanoparticles may be a general strategy for producing hydrogel implants resistant to physiological stresses.

PLA-lignin nanofibers as antioxidant biomaterials for cartilage regeneration and osteoarthritis treatment.

BACKGROUND: Osteoarthritis (OA) is common musculoskeletal disorders associated with overgeneration of free radicals, and it causes joint pain, inflammation, and cartilage degradation. Lignin as a natural antioxidant biopolymer has shown its great potential for biomedical applications. In this work, we developed a series of lignin-based nanofibers as antioxidative scaffolds for cartilage tissue engineering. RESULTS: The nanofibers were engineered by grafting poly(lactic acid) (PLA) into lignin via ring-opening polymerization and followed by electrospinning. Varying the lignin content in the system was able to adjust the physiochemical properties of the resulting nanofibers, including fiber diameters, mechanical and viscoelastic properties, and antioxidant activity. In vitro study demonstrated that the PLA-lignin nanofibers could protect bone marrow-derived mesenchymal stem/stromal cells (BMSCs) from oxidative stress and promote the chondrogenic differentiation. Moreover, the animal study showed that the lignin nanofibers could promote cartilage regeneration and repair cartilage defects within 6 weeks of implantation. CONCLUSION: Our study indicated that lignin-based nanofibers could serve as an antioxidant tissue engineering scaffold and facilitate the cartilage regrowth for OA treatment.

Paper-based device for the selective determination of doxycycline antibiotic based on the turn-on fluorescence of bovine serum albumin-coated copper nanoclusters.

An enhanced ratiometric fluorescence sensor was built for on-site visual detection of doxycycline (DOX) through the interaction with bovine serum albumin on the surface of red emissive copper nanoclusters. Upon the addition of weakly fluorescent DOX, the red fluorescence from copper nanoclusters gradually decreased through the inner-filter effect (IFE), while a green fluorescence appears and significantly increases, forming an interesting fluorescent isosbestic point, which was assigned to DOX due to sensitization effect of bovine serum albumin. On the basis of this ratiometric fluorescence, the system possessed good limit of detection (LOD) of 45 nM and excellent selectivity for DOX over other tetracyclines. Based on these findings, a paper-based sensor has been fabricated for distinct visual detection of trace DOX and combined with smartphone color recognizer for quantitative detection of DOX (LOD = 83 nM). This method shows broad application prospects in environmental monitoring and food safety.

Using Artificial Skin Devices as Skin Replacements: Insights into Superficial Treatment.

Artificial skin devices are able to mimic the flexibility and sensory perception abilities of the skin. They have thus garnered attention in the biomedical field as potential skin replacements. This Review delves into issues pertaining to these skin-deep devices. It first elaborates on the roles that these devices have to fulfill as skin replacements, and identify strategies that are used to achieve such functionality. Following which, a comparison is done between the current state of these skin-deep devices and that of natural skin. Finally, an outlook on artificial skin devices is presented, which discusses how complementary technologies can create skin enhancements, and what challenges face such devices.

Polymeric Janus Nanoparticles: Recent Advances in Synthetic Strategies, Materials Properties, and Applications.

Polymeric Janus nanoparticles with two sides of incompatible chemistry have received increasing attention due to their tunable asymmetric structure and unique material characteristics. Recently, with the rapid progress in controlled polymerization combined with novel fabrication techniques, a large array of functional polymeric Janus particles are diversified with sophisticated architecture and applications. In this review, the most recently developed strategies for controlled synthesis of polymeric Janus nanoparticles with well-defined size and complex superstructures are summarized. In addition, the pros and cons of each approach in mediating the anisotropic shapes of polymeric Janus particles as well as their asymmetric spatial distribution of chemical compositions and functionalities are discussed and compared. Finally, these newly developed structural nanoparticles with specific shapes and surface functions orientated applications in different domains are also discussed, followed by the perspectives and challenges faced in the further advancement of polymeric Janus nanoparticles as high performance materials.

pH-Responsive Poly(dimethylsiloxane) Copolymer Decorated Magnetic Nanoparticles for Remotely Controlled Oil-in-Water Nanoemulsion Separation.

A smart and recyclable oil absorber based on pH-responsive block copolymer modified magnetic nanoparticles is constructed for effective separation of oil-in-water emulsions. Superparamagnetic iron(III) oxide (Fe3 O4 ) nanoparticles are designed as the core materials for providing the separation force, and surface modification with poly(4-vinylpyridine-b-dimethyl siloxane-b-4-vinylpyridine) (P4VP-PDMS-P4VP) block copolymer is performed to supply switchable oil wettability. The mean hydrodynamic radius of the nanoparticles increases from 43.8 ± 3.6 to 75.2 ± 5.3 nm when the neutral pH is reduced to 3, due to the protonation and subsequent swelling of P4VP segments at lower pH. The nanoparticles show excellent separation performance and can absorb octadecene up to 78.2 times of their own weight, simply by switching the pH of the oil-in-water emulsion treated with the nanoparticles and using a magnetic field. The different dipole of P4VP-PDMS-P4VP and protonated P4VP-PDMS-P4VP, as confirmed by density functional theory calculations, is responsible for the different oil miscibility and wettability of the nanoparticles.

Targeted and Sustained Corelease of Chemotherapeutics and Gene by Injectable Supramolecular Hydrogel for Drug-Resistant Cancer Therapy.

Coadministration of chemotherapeutics as well as therapeutic gene could play a synergistic effect on cancer treatment. It is noteworthy that targeted and sustained codelivery of chemotherapeutic and therapeutic gene was rarely achieved in previous reports, while it might serve as an important platform for treating solid tumor with possible surrounding lesions. Herein, an injectable supramolecular hydrogel formed by α-cyclodextrin (α-CD) and cationic amphiphilic copolymer made of methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone)-b-poly(ethylene imine) with folic acid targeted group (MPEG-PCL-PEI-FA), is rationally designed to achieve sustained codelivery of chemotherapeutic paclitaxel (PTX) and B-cell lymphoma-2 (Bcl-2) conversion gene Nur77 in the form of nanocomplex up to 7 days, to effectively inhibit the growth of folate receptor overexpressing H460/Bcl-2 therapeutic-resistant tumors (induced by overexpression of anti-apoptotic Bcl-2 protein), with peritumoral injection rather than direct intratumoral injection of hydrogel. To the best of our knowledge, this is a pioneer report on injectable MPEG-PCL-PEI-FA/α-CD supramolecular hydrogel with the ability to codeliver and sustainedly release PTX and Nur77 gene to combat Bcl-2 overexpressed therapeutic-resistant tumors in a targeted manner, which might be beneficial for further design in personalized medicine.

Precise Synthesis of PS-PLA Janus Star-Like Copolymer.

In this work, an efficient strategy is designed for the precise synthesis of novel Janus star-like copolymer (polystyrene)8 -b-(poly(l-lactide))8 , (PLLA)8 -b-(PS)8 , consisting of two types of chemically distinct polymer arms, PS and PLLA, in an asymmetric structure. During the synthesis, PLLA hemisphere carrying protected hydroxyl groups at the focal point was first synthesized via a combined reactions of esterification, light-induced "Click" chemistry, and ring opening polymerization (ROP) using a specially designed dendron as initiator. After removing the protecting moiety, the terminal hydroxyl groups on the dendron segment is increased fourfold and further modified into bromopropionate-based macroinitiator through a two-step end group transformation reaction, followed by atom transfer radical polymerization (ATRP) of styrene to obtain the desired (PLLA)8 -b-(PS)8 Janus star-like copolymer. The versatility and efficiency of the designed synthetic strategy are demonstrated by the well-defined molecular characteristics and high yields of the targeted product. In addition to the controlled degradation behavior of the PLLA segments, the remaining bromide groups located at the distal end of PS arms could allow for further fabrication of diverse building blocks through consecutive ATRP of various monomers. This work signifies the first time for facile and precise synthesis of Janus star-like copolymer with unique biphasic structure and function control.

Cyclodextrin-Based Star-Like Amphiphilic Cationic Polymer as a Potential Pharmaceutical Carrier in Macrophages.

Effective delivery of therapeutic genes or small molecular drugs into macrophages is important for cell based immune therapy, but it remains a challenge due to the intracellular reactive oxygen species and endosomal degradation of therapeutics inside immune cells. In this report, the star-like amphiphilic biocompatible ß-cyclodextrin-graft-(poly(ε-caprolactone)-block-poly(2-(dimethylamino) ethyl methacrylate)x (ß-CD-g-(PCL-b-PDMAEMA)x ) copolymer, consisting of a biocompatible cyclodextrin core, hydrophobic poly(ε-caprolactone) PCL segments and hydrophilic PDMAEMA blocks with positive charge, is optimized to achieve high efficiency gene transfection with enhanced stability, due to the micelle formation by hydrophobic PCL segments. In comparison with lipofetamine, a currently popular nonviral gene carrier, ß-CD-g-(PCL-b-PDMAEMA)x copolymer, shows better transfection efficiency of plasmid desoxyribose nucleic acid in RAW264.7 macrophages. More interestingly, this delivery platform by ß-CD-g-(PCL-b-PDMAEMA)x not only shows low toxicity but also better dexamethasone delivery efficiency, which might indicate its great potential in immunotherapy.

Polyester elastomers for soft tissue engineering.

Polyester elastomers are soft, biodegradable and biocompatible and are commonly used in various biomedical applications, especially in tissue engineering. These synthetic polyesters can be easily fabricated using various techniques such as solvent casting, particle leaching, molding, electrospinning, 3-dimensional printing, photolithography, microablation etc. A large proportion of tissue engineering research efforts have focused on the use of allografts, decellularized animal scaffolds or other biological materials as scaffolds, but they face the major concern of triggering immunological responses from the host, on top of other issues. This review paper will introduce the recent developments in elastomeric polyesters, their synthesis and fabrication techniques, as well as their application in the biomedical field, focusing primarily on tissue engineering in ophthalmology, cardiac and vascular systems. Some of the commercial and near-commercial polyesters used in these tissue engineering fields will also be described.

Supramolecular hydrogels for antimicrobial therapy.

The emergence of drug-resistant microbes has become a threat to global health, and microbial infections severely limit the use of healthcare materials. To achieve efficient antimicrobial therapy, supramolecular hydrogels demonstrate unprecedented advantages in medical applications due to the tunable and reversible nature of their supramolecular interactions and the capability of hydrogels to incorporate various therapeutic agents. Herein, antimicrobial hydrogels are categorized according to their inherent antimicrobial properties or based on their roles in encapsulating antimicrobial materials. Moreover, strategies to further enhance the antimicrobial efficacy of hydrogels are highlighted, such as the incorporation of antifouling agents or the enabling of response towards physiological cues. We envision that supramolecular hydrogels, in combination with modern medical technology and devices, will contribute to the development of efficient and safe systems for antimicrobial therapy.

Dominant Albumin-Surface Interactions under Independent Control of Surface Charge and Wettability.

Understanding protein adsorption behaviors on solid surfaces constitutes an important step toward development of efficacious and biocompatible medical devices. Both surface charge and wettability have been shown to influence protein adsorption attributes, including kinetics, quantities, deformation, and reversibility. However, determining the dominant interaction in these surface-induced phenomena is challenging because of the complexity of inter-related mechanisms at the liquid/solid interface. Herein, we reveal the dominant interfacial forces in these essential protein adsorption attributes under the influence of a combination of surface charge and wettability, using quartz crystal microbalance with dissipation monitoring and atomic force microscopy-based force spectroscopy on a series of model surfaces. These surfaces were fabricated via layer-by-layer assembly, which allowed two-dimensional control of surface charge and wettability with minimal cross-parameter dependency. We focused on a soft globular protein, bovine serum albumin (BSA), which is prone to conformational changes during adsorption. The information obtained from the two techniques shows that both surface charge and hydrophobicity can increase the protein-surface interaction forces and the adsorbed amount. However, surface hydrophobicity triggered a greater extent of deformation in the adsorbed BSA molecules, leading to more dehydration, spreading, and resistance to elution by ionic strength changes regardless of the surface charge. The role played by the surface charge in the adsorbed protein conformation and extent of desorption induced by changes in the ionic strength is secondary to that of surface hydrophobicity. These findings advance the understanding of how surface chemistry and properties can be tailored for directing protein-substrate interactions.

A Recent Perspective on Noncovalently Formed Polymeric Hydrogels.

Chemically crosslinked covalent hydrogels form a permanent and often strong network, and have been extensively used so far in drug delivery and tissue engineering. However, it is more difficult to induce dynamic and highly tunable changes in these hydrogels. Noncovalently formed hydrogels show promise as inherently reversible systems with an ability to change in response to dynamic environments, and have garnered strong interest recently. In this Personal Account, we elucidate a few key attractive properties of noncovalent hydrogels and describe recent developments in hydrogels crosslinked using various different noncovalent interactions. These hydrogels offer huge control for modulating material properties and could be more relevant mimics for biological systems.