Uptake and cellular responses of Microcystis aeruginosa to PFOS in various environmental conditions.

Although PFOS has been banned as a persistent organic pollutant, it still exists in large quantities within the environment, thus impacting the health of aquatic ecosystems. Previous studies focused solely on high PFOS concentrations, disregarding the connection with environmental factors. To gain a more comprehensive understanding of the PFOS effects on aquatic ecosystems amidst changing environmental conditions, this study investigated the cellular responses of Microcystis aeruginosa to varying PFOS concentrations under heatwave and nutrient stress conditions. The results showed that PFOS concentrations exceeding 5.0 µg/L had obvious effects on multiple physiological responses of M. aeruginosa, resulting in the suppression of algal cell growth and the induction of oxidative damage. However, PFOS concentration at levels below 20.0 µg/L has been found to enhance the growth of algal cells and trigger significant oxidative damage under heatwave conditions. Heatwave conditions could enhance the uptake of PFOS in algal cells, potentially leading to heightened algal growth when PFOS concentration was equal to or less than 5.0 µg/L. Conversely, deficiency or limitation of nitrogen and phosphorus significantly decreased algal abundance and chlorophyll content, inducing severe oxidative stress that could be mitigated by exposure to PFOS. This study holds significance in managing the impact of PFOS on algal growth across diverse environmental conditions.

Drivers of change in China's energy-related CO2 emissions.

CO2 emissions are of global concern because of climate change. China has become the largest CO2 emitter in the world and presently accounts for 30% of global emissions. Here, we analyze the major drivers of energy-related CO2 emissions in China from 1978 when the reform and opening-up policy was launched. We find that 1) there has been a 6-fold increase in energy-related CO2 emissions, which was driven primarily (176%) by economic growth followed by population growth (16%), while the effects of energy intensity (-79%) and carbon intensity (-13%) slowed the growth of carbon emissions over most of this period; 2) energy-related CO2 emissions are positively related to per capita gross domestic product (GDP), population growth rate, carbon intensity, and energy intensity; and 3) a portfolio of command-and-control policies affecting the drivers has altered the total emission trend. However, given the major role of China in global climate change mitigation, significant future reductions in China's CO2 emissions will require transformation toward low-carbon energy systems.

A climate-water quality assessment framework for quantifying the contributions of climate change and human activities to water quality variations.

Water quality safety has attracted global attention and is closely related to the development of the social economy and human health. It is widely recognized that climate change and human activities significantly affect water quality changes. Therefore, quantifying the contributions of factors that drive long-term water quality changes is crucial for effective water quality management. Here, we built a climate-water quality assessment framework (CWQAF) based on climate-water quality response coefficients and trend analysis methods, to achieve this goal. Our results showed that the water quality improved significantly by 4.45%-20.54% from 2011 to 2020 in the Minjiang River basin (MRB). Human activities (including the construction of ecological projects, stricter discharge measures, etc.) were the main driving factors contributing 65%-77% of the improvement effect. Notably, there were differences in the contributions of human activities to water quality parameter changes, such as DO (increase (I): 0.12 mg/L, human contribution (HC): 66.8%), CODMn (decrease (D): 0.71 mg/L, HC: 67.2%), BOD5 (D: 1.10 mg/L, HC: 77.7%), CODCr (D: 4.20 mg/L, HC: 81.2%), TP (D: 0.13 mg/L,HC: 72.8%) and NH3-N (D: 0.40 mg/L, HC: 63.0%). Climate change explained 23%-35% of the variation in water quality. The water quality response to climate change was relatively significant with precipitation. For example, the downstream region was more susceptible to climate change than was the upstream region, as the downstream movement of precipitation centers strengthened the process of climatic factors affecting water quality changes in the MRB. Generally, although human activities were the main driving factor of water quality changes at the basin scale, the contribution of climate change could not be ignored. This study provided a manageable framework for the quantitative analysis of the influence of human activities and climate change on water quality to enable more precise and effective water quality management.

Greenhouse gas emissions from extractive industries in a globalized era.

The extractive industry consumes vast amounts of energy and is a major contributor to greenhouse gas (GHG) emissions. However, its climatic impacts have not yet been fully accounted for. In this study, we estimated the GHG emissions from extractive activities globally with a focus on China, and assessed the main emission drivers. In addition, we predicted the Chinese extractive industry emissions in the context of global mineral demand and cycling. As of 2020, GHG emissions from the global extractive industry had reached 7.7 billion tons of CO2 equivalents (CO2e), accounting for approximately 15.0% of the global anthropogenic GHG emissions (excluding GHG emissions from land use, land-use change, and forestry activities (LULUCF), with China being the largest emitter, accounting for 3.5% of global emissions. Extractive industry GHG emissions are projected to peak by 2030 or even earlier to achieve low-carbon peak targets. The most critical pathway for reducing GHG emissions in the extractive industry is to control emissions from coal mining. Therefore, reducing methane emissions from mining and washing coal (MWC) should be prioritized.

Total-factor energy efficiency of ten major global energy-consuming countries.

Improving energy efficiency is regarded as a key path to tackling global warming and achieving the Sustainable Development Goals (SDGs). In 2020, the energy consumption of the world's ten major energy-consuming countries accounted for 66.8% of the global total. This paper applied data envelopment analysis (DEA) to calculate these ten major energy-consuming countries' total-factor energy efficiency (TFEE) at national and sectoral levels from 2001-2020, and explored the influencing factors of total-factor energy efficiency with the Tobit regression model. The results showed significant difference in the ten countries' energy efficiency. The United States and Germany topped the list for total-factor energy efficiency, while China and India were at the bottom. Meanwhile, the energy efficiency of the industrial subsector has increased significantly over the past two decades, while that of the other subsectors has been relatively flat. The industrial structure upgrading, per capita GDP, energy consumption structure, and foreign direct investment had significant impacts on energy efficiency with national heterogeneity. Energy consumption structure and GDP per capita were determinative factors of energy efficiency.

First report of perfluoroalkyl acids (PFAAs) in the Indus Drainage System: Occurrence, source and environmental risk.

Perfluoroalkyl acids (PFAAs) are of global interest due to their persistence in the aquatic environment. This study assessed the occurrence of PFAAs in the Indus Drainage System and discerned their potential sources and environmental risks for the first time in Pakistan. 13 perfluoroalkyl carboxylic acids (PFCAs) and 4 perfluoroalkyl sulfonates (PFSAs) were analyzed to verify the dominant prevalence of short-chain PFAAs in the environment since the phase-out of long-chain perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). A significant variation (p ≤ 0.05) of individual PFAAs between the monitoring sites was confirmed by data normality tests Kolmogorov-Smirnov and Shapiro-Wilk, suggesting that different locations contribute differently to individual PFAAs concentrations. ΣPFAAs concentrations in riverine water and sediments ranged from 2.28 to 221.75 ng/L and 0.78-29.19 ng/g dw, respectively. PFBA, PFPeA, and PFHxA were the most abundant PFAAs, and on average accounted for 14.64, 13.75, and 12.97 ng/L of ∑PFAAs in riverine water and 0.34, 0.64, and 0.79 ng/g dw of ∑PFAAs in sediments. ΣPFAAs mean contamination in the drainage was significantly (p < 0.05) high in River Chenab followed by River Indus > Soan > Ravi > Kabul > Swat with more prevalence of short-chain (C4-C7) PFCAs followed by PFOA, PFBS, PFOS, PFNA, PFDA, PFHxS, PFUnDA, and PFDoDA. The correlation analysis determined the PFAAs' fate and distribution along the drainage, indicating that PFAAs with carbon chains C4-C12, except for PFSAs with carbon chains C6-C8, were most likely contaminated by the same source, the values of Kd and Koc increased linearly with the length of the perfluoroalkyl carbon chain, better understand the transport and partitioning of individual PFAAs between riverine water and sediments, where the HCA and PCA discerned industrial/municipal wastewater discharge, agricultural and surface runoff from nearby fields, and urban localities as potential sources of PFAAs contamination. The collective mass flux of short-chain (C4-C7) PFCAs was 5x higher than that of PFOS + PFOA, suggesting a continuous shift in the production and usage of fluorinated replacements for long-chain PFAAs with short-chain homologs. In terms of risk, individual PFAAs pollution in the drainage was within the world's risk thresholds for human health, with the exception of PFBA, PFPeA, PFHpA, PFHxA, PFOA, PFNA, and PFBS, whereas for ecology, the concentrations of individual PFAAs did not exceed the ecological risk thresholds of the United States of America, Canada, European Union (EU), Italy, Australia, and New Zealand, with the exception of PFSAs, whose detected individual concentrations were significantly higher than the EU, Australian and New Zealander PFSAs guidelines of 0.002 µg/L, 0.00047 µg/L, 0.00065 µg/L, 0.00013 µg/L, and 0.00023 µg/L, respectively, which may pose chronic risks to the regional ecosystem and population.

Discovery of Welcome Biopolymers in Surface Water: Improvements in Drinking Water Production.

The presence of biopolymers in surface waters and their significance for potable water supply have received little attention previously owing to their low concentrations. In this paper, we present the results of an extensive study that has investigated the role and benefits of biopolymers during the purification of surface water with reference to their specific biological and physico-chemical properties. Using samples collected from two representative surface waters in China and the United Kingdom, macromolecular biopolymers were separated and concentrated for subsequent investigation of their role in coagulation, metal ion adsorption, and membrane separation. Our results show that biopolymers significantly improve the antifouling capability of membrane nanofiltration, in combination with the enhanced conventional coagulation performance and additional security against several unhealthy metal pollutants (e.g., Fe, Al, and Cr). We believe this is the first study that reveals the versatile benefits and the fate of natural biopolymers in surface water purification processes.

A SPE-HPLC-MS/MS method for the simultaneous determination of prioritised pharmaceuticals and EDCs with high environmental risk potential in freshwater.

This work describes the development, optimisation and validation of an analytical method for the rapid determination of 17 priority pharmaceutical compounds and endocrine disrupting chemicals (EDCs). Rather than studying compounds from the same therapeutic class, the analyses aimed to determine target compounds with the highest risk potential (with particular regard to Scotland), providing a tool for further monitoring in different water matrices. Prioritisation was based on a systematic environmental risk assessment approach, using consumption data; wastewater treatment removal efficiency; environmental occurrence; toxicological effects; and pre-existing regulatory indicators. This process highlighted 17 compounds across various therapeutic classes, which were then quantified, at environmentally relevant concentrations, by a single analytical methodology. Analytical determination was achieved using a single-step solid phase extraction (SPE) procedure followed by high-performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS). The fully optimised method performed well for the majority of target compounds, with recoveries >71% for 15 of 17 analytes. The limits of quantification for most target analytes (14 of 17) ranged from 0.07 ng/L to 1.88 ng/L in river waters. The utility of this method was then demonstrated using real water samples associated with a rural hospital/setting. Eight compounds were targeted and detected, with the highest levels found for the analgesic, paracetamol (at up to 105,910 ng/L in the hospital discharge). This method offers a robust tool to monitor high priority pharmaceutical and EDC levels in various aqueous sample matrices.

Hydrogeochemistry and quality of surface water and groundwater in the drinking water source area of an urbanizing region.

The water quality in drinking water source area is essential for human health. Due to rapid urbanization and industrialization, the pollutants, especially trace elements, are continuously discharged into aquatic environment and pose a risk to human health. An extensive investigation was carried out in drinking water source area in highly urbanized Tianjin of China. Long-term monitoring data of the water body was collected on conventional physical and chemical parameters (pH, ions, TOC etc.) and metallic elements (Hg, As Cd, Pb, Co, U etc.) from 2005 to 2017. Our results showed that CaMg-Cl-SO4 and CaMg-HCO3 were the two prominent hydrochemical materials, implying that the pollution of aquatic system was mainly caused by anthropogenic activities and mineral dissolution within terms of drinking water guidelines (national and international standards), the concentrations of arsenic (As) and iron (Fe) were beyond the quality standards. Multivariate statistical approaches were applied to assess the origins of the elements. The results showed that human activities, as well as endogenous release, contributed significantly to appearance of trace elements. A transformation from low-trophic state to high-trophic state was in progress from 2005 to 2017 in Yuqiao reservoir, and most of the water was not heavily polluted by trace elements. The health risk assessment suggested that As had the potential to cause carcinogenic harm to the local residents, with daily dietary ingestion as the most predominant pathway.

Occurrence, sources and health risk of polyfluoroalkyl substances (PFASs) in soil, water and sediment from a drinking water source area.

Polyfluoroalkyl substances (PFASs) enter into environmental metric via various pathways in the process of manufacturing and consuming the products containing PFASs. Yuqiao reservoir (YQR) is a major drinking water source in Tianjin of China, where little attention was given to PFASs. To explore the occurrence, source and risk of 17 PFASs, multi-media environmental including soil, water, and sediment were sampled from this water source area. The ∑PFASs concentrations of surface water, groundwater, soil and sediment ranged from 5.839 to 120.885 ng/L, 1.426 to 17.138 ng/L, 0.622 to 5.089 µg/kg dw, and 0.240 to 1.210 µg/kg dw respectively. Some short-chained (C4-C8) PFASs were detected widely such as PFOA, PFBA, PFHxA, PFBS, PFHpA and PFPeA in surface water and groundwater, with the detection frequency of ＞78%, and PFBA and PFOA dominated in the 17 PFASs. In addition, the correlations between total PFASs and TOC were significant at 0.05 level, especially in surface water with R2 = 0.9165 (p = 0.011). In terms of vertical distribution characteristics of ∑PFASs, the ∑PFASs in four sediment cores showed a decreasing trend at first, and then an increasing trend from the bottom to the top associated with TOC. PFBA/PFOA and PFHpA/PFOA showed better linear correlations with R2 of 0.5541 (p = 0.039), and for PFNA/PFOA and PFHpA/PFOA with R2 of 0.6312 (p = 0.032) at the 0.05 level in the surface water, which indicated that sewage and atmospheric precipitation were the major sources. Though the RQ results based on the measured concentrations and reference values in environmental media revealed lower risks, the potential hazard may occur due to accumulation characteristics and long-distance transmission capability of PFASs. Hence, the corresponding management strategies should be taken, such as control over emission at source, product substitution and strengthening legislation, to eliminate potential risks to human health.

Mortality, growth and metabolic responses by 1H-NMR-based metabolomics of earthworms to sodium selenite exposure in soils.

The rapid development of selenium-enriched agriculture leads to the accumulation of selenium in the soil, which has an adverse impact on terrestrial ecosystems. In the present study, the mortality, growth inhibition rate and metabolism of earthworms were examined to investigate the toxicological effects of sodium selenite (Na2SeO3) on earthworms (Eisenia fetida) after exposuring for 14 days (d). We used 1H-NMR-based metabolomics to identify sensitive biomarkers and explored the metabolic responses of earthworms exposed to Na2SeO3. The mortality and growth inhibition rate of earthworms exposed to 70 and 90 mg/kg Na2SeO3 were significantly higher than the rate of control group. The LC50 (the median lethal concentration) of Na2SeO3 was 57.4 mg/kg in this artificial soil test of E. fetida exposed to Na2SeO3 for 14 d. However, there was no significant differences when earthworms were exposed to different concentrations of Na2SeO3. The selected metabolic markers were ATP, lactic acid, leucine, alanine, valine, glycine, glutamic acid, lysine, α-glucose and betaine. Na2SeO3 affected the metabolic level of earthworms, as the percentage of metabolic markers in the earthworm changes when exposed to different concentrations of Na2SeO3. The metabolic disturbances were greater with increasing concentrations of Na2SeO3. The differential metabolic markers were significantly changed when exposed to Na2SeO3 comparing to those in the control group, affecting the tricarboxylic acid cycle process and breaking the metabolic balance. This study showed that Na2SeO3 had toxic effect on the growth and development of earthworms. In addition, this study provided a biochemical insights for the development of selenium-enriched agriculture.

Urban-rural gradients of polycyclic aromatic hydrocarbons in soils at a regional scale: Quantification and prediction.

The quantitative study of urban-rural gradients for persistent organic pollutants (POPs) is extremely important to understand the behavior of POPs as well as for ecological risk assessment and management. In this study, a practical urban-rural gradient model (URGM) was developed using atmospheric point source diffusion combined with a fugacity approach to test potential mathematical relationships among urban and rural soils. The mean value of polycyclic aromatic hydrocarbons (PAHs) for urban soils (0-2-km sites) was 570.80 ng/g, and was approximately 3.5 times higher than rural soils (30-50 km sites). Significant linear correlations were found between the amounts of PAHs in the surface soil and the city population and between the soil concentration and artificial surface area. Urban-rural PAH concentrations were simulated by the URGM and calibrated by city population and land-cover data, with average relative errors of 12.84%. The results showed that the URGM was suitable for simulating urban-rural PAH concentrations at a regional scale. The combustion of fossil fuels, biomass, and coal was the main source of soil PAHs in the study area, and the characteristic ratios of PAHs indicated a transition trend from pyrogenic to petrogenic sources along the urban-rural transects. This study thus provides a combined method for quantifying urban-rural gradients of PAHs and can thereby promote quantitative research on coupling among land cover, socio-economic data, and POP concentrations.

Climate change induced eutrophication of cold-water lake in an ecologically fragile nature reserve.

Aquatic ecosystem sustainability around the globe is facing crucial challenges because of increasing anthropogenic and natural disturbances. In this study, the Tianchi Lake, a typical cold-water lake and a UNESCO/MAB (Man and Biosphere) nature reserve located in high latitude and elevation with the relatively low intensity of human activity was chosen as a system to examine the linkages between climate change and eutrophication. As a part of the UNESCO Bogda Man and Biosphere Reserve, Tianchi Lake has been well preserved for prevention from human intervention, but why has it been infected with eutrophication recent years? Our results show that climate change played a significant role in the eutrophication in the Tianchi Lake. Increased temperature, changed precipitation pattern and wind-induced hydrodynamic fluctuations in the summer season were suggested to make a major contribution to the accelerated eutrophication. The results also showed that the local temperature and precipitation changes were closely linked to the large-scale atmospheric circulation, which opens the door for the method to be applied in other regions without local climatic information. This study suggests that there is an urgent need to take into consideration of climate change adaptation into the conservation and management of cold-water lakes globally.

Sublethal or not? Responses of multiple biomarkers in Daphnia magna to single and joint effects of BDE-47 and BDE-209.

Polybrominated diphenyl ethers (PBDEs) are extremely incessant anthropogenic contaminants found in the environment, with dreadful risk to aquatic ecosystems. However, there is a limited amount of data concerning their impacts on freshwater organisms. 2,2',3,3',4,4',5,5',6,6'-decabromodiphenyl ether (BDE-209) and 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) are significant components of total PBDEs in water. The sublethal effects of BDE-47, BDE-209 and their binary mixtures on the aquatic organism Daphnia magna were investigated in acute and chronic exposure experiments. Immobilization and heartbeat were studied in daphnids after 48 h of exposure. Mortality rate, breed number, Cholinesterase (ChE), Glutathione S-transferases (GST) and Catalase (CAT) activities were evaluated after 21 days of exposure. The results showed that at 100 and 200 µg/L concentration of BDE-47, immobilization rate of daphnids were inhibited by 44.0 ±â€¯16.7% and 88.0 ±â€¯10.9%, respectively. The binary mixture of BDE-47 and BDE-209 had uncongenial effects on immobilization of D. magna under acute toxicity test. BDE-209 significantly increased the heartbeat rate of daphnids, which increased even further when combined with BDE-47. After 21 days of exposure, daphnids exposed to single BDE-47 were physiologically altered. The combination of BDE-47 with BDE-209 significantly decreased the mortality rate of daphnids. Irrespective of the concentration, higher numbers of offsprings were produced in the mixtures compared to BDE-47 treatment alone. ChE activities significantly (p < 0.05) decreased at concentrations of 2 and 4 µg/L in single BDE-47 treatment, while GST activity significantly (p < 0.05) decreased at 0.5 µg/L. CAT activities significantly increased with BDE-47 treatments in all the tested concentrations (p < 0.05). The mixtures significantly affect ChE (p < 0.05), GST (p < 0.05) and CAT activities (p < 0.05). The results illustrated that the toxicity of the mixture of PBDE congeners exposed to aquatic organisms may have antagonistic effects. The 21 days chronic test in this study suggests that acute toxicity tests, i.e. 48-h tests, using Daphnia may lead to underestimation of risks associated with PBDEs, especially, BDE-209. Hence, there is a necessity to re-examine PBDE congeners' environmental risk in aquatic organisms.

Prevalent fecal contamination in drinking water resources and potential health risks in Swat, Pakistan.

Fecal bacteria contaminate water resources and result in associated waterborne diseases. This study assessed drinking water quality and evaluated their potential health risks in Swat, Pakistan. Ground and surface drinking water were randomly collected from upstream to downstream in the River Swat watershed and analyzed for fecal contamination using fecal indicator bacteria (Escherichia coli) and physiochemical parameters (potential of hydrogen, turbidity, temperature, electrical conductivity, total dissolved solid, color, odor and taste). The physiochemical parameters were within their safe limits except in a few locations, whereas, the fecal contaminations in drinking water resources exceeded the drinking water quality standards of Pakistan Environmental Protection Agency (Pak-EPA), 2008 and World Health Organization (WHO), 2011. Multivariate and univariate analyses revealed that downstream urbanization trend, minimum distance between water sources and pit latrines/sewerage systems, raw sewage deep well injection and amplified urban, pastures and agricultural runoffs having human and animal excreta were the possible sources of contamination. The questionnaire survey revealed that majority of the local people using 10-20years old drinking water supply schemes at the rate of 73% well supply, 13% hand pump supply, 11% spring supply and 3% river/streams supply, which spreads high prevalence of water borne diseases including hepatitis, intestinal infections and diarrhea, dysentery, cholera, typhoid fever, jaundice and skin diseases in children followed by older and younger adults.

Determination of water environment standards based on water quality criteria in China: Limitations and feasibilities.

There is a need to formulate water environment standards (WESs) from the current water quality criteria (WQC) in China. To this end, we briefly summarize typical mechanisms applied in several countries with longer histories of developing WESs, and three limitations to formulating WESs in China were identified. After analyzing the feasibility factors including economic development, scientific support capability and environmental policies, we realized that China is still not ready for a complete change from its current nation-wide unified WES system to a local-standard-based system. Thus, we proposed a framework for transformation from WQC to WESs in China. The framework consists of three parts, including responsibilities, processes and policies. The responsibilities include research authorization, development of guidelines, and collection of information, at both national and local levels; the processes include four steps and an impact factor system to establish water quality standards; and the policies include seven specific proposals.

Urban and rural transport of semivolatile organic compounds at regional scale: A multimedia model approach.

Urban areas are generally regarded as major sources of some semivolatile organic compounds and other persistent organic pollutants (POPs) to the surrounding regions. Huge differences in contaminant emissions between urban and rural areas directly affect their fate in environmental media. Little is known about POPs behavior between urban and rural areas at a regional scale. A spatially resolved Berkeley-Trent-Urban-Rural Fate Model (BETR-UR) was designed by coupling land cover information to simulate the transport of POPs between urban and rural areas, and the Bohai Rim was used as a case study to estimate Polycyclic Aromatic Hydrocarbon (PAH) fate. The processes of contaminant fate including emission, inter-compartmental transfer, advection and degradation in urban and rural areas were simulated in the model. Simulated PAH concentrations in environmental media of urban and rural areas were very close to measured values. The model accuracy was highly improved, with the average absolute relative error for PAH concentrations reduced from 37% to 3% compared with unimproved model results. PAH concentrations in urban soil and air were considerably higher than those in rural areas. Sensitivity analysis showed temperature was the most influential parameter for Phen rather than for Bap, whose fate was more influenced by emission rate, compartment dimension, transport velocity and chemical persistence. Uncertainty analysis indicated modeled results in urban media had higher uncertainty than those in rural areas due to larger variations of emissions in urban areas. The differences in urban and rural areas provided us with valuable guidance on policy setting for urban-rural POP control.