RESUMO
The Z-scan technique, using femtosecond (fs) laser pulses at 1480 nm laser pulses, was used to measure the nonlinear optical properties of gold (Au) nanoparticle (NP) films made by both nanosecond (ns) and fs pulsed laser deposition (PLD) in vacuum. At irradiance levels of 1×1012 Wm-2, the ns-PLD films displayed induced absorption with ß=4×10-5 mW-1, and a negative lensing effect with n2=-4.7×10-11 m2 W-1 with somewhat smaller values for the fs-PLD films. These values of n2 imply an unphysically large change in the real part of the refractive index, demonstrating the need to take account of nonlinear changes of the Fresnel coefficients and multiple beam interference in Z-scan measurements on nanoscale films. Following this approach, the Z-scan observations were analyzed to determine the effective complex refractive index of the NP film at high irradiance. It appears that at high irradiance the NP film behaves as a metal, while at low irradiance it behaves as a low-loss dielectric. Thus, it is conjectured that, for high irradiance near the waist of the Z-scan laser beam, laser driven electron tunneling between NPs gives rise to metal-like optical behavior.
RESUMO
A new method for pulsed laser deposition of plasmonic silver nanoparticle (NP) films in flowing gas at atmospheric pressure is described. The ablation was done using an excimer laser at 248 nm. Fast optical imaging shows that the ablation plume is captured by the flowing gas, and is expected to form a NP aerosol, which is carried 5-20 mm to the substrate. The dependence of the deposition rate on laser fluence, gas flow velocity, and target-substrate distance was investigated using electron microscopy and absorption spectroscopy of the deposited films. The NP films were annealed in argon and hydrogen at 400 °C, and in air for temperatures in the range 200 °C-900 °C, leading to strong enhancement, and narrowing of the surface plasmon resonance. The films were used for surface enhanced Raman spectroscopy of a 10-5 molar solution of Rhodamine 6G; films annealed in air at 400 °C were five times more sensitive than the as-deposited films.
RESUMO
Conical diffraction is observed in biaxial materials when a beam of light is directed along one of the two optic axis directions. When the beam is directed close to but not along an optic axis, a rich interference pattern is observed beyond the material. We observe some of the previously predicted low intensity interference patterns, representing a qualitatively new optical phenomenon in biaxial materials.
RESUMO
The phenomenon of internal conical diffraction has been studied extensively for the case of laser beams with Gaussian intensity profiles incident along an optic axis of a biaxial material. This work presents experimental images for a top-hat input beam and offers a theoretical model which successfully describes the conically diffracted intensity profile, which is observed to differ qualitatively from the Gaussian case. The far-field evolution of the beam is predicted to be particularly interesting with a very intricate structure, and this is confirmed experimentally.
RESUMO
Nanoparticle (NP) films of silver were prepared using nanosecond (ns) and femtosecond (fs) pulsed laser deposition (PLD) in vacuum. The flux and energy distribution of the ions in the plasma part of the ablation plume were measured using a Langmuir ion probe. The deposition energy efficiencies of ns and fs silver PLD were also compared. For equivalent thickness up to â¼3 nm the NPs made by ns-PLD are well separated and roughly circular, but for higher thicknesses the NPs begin to coalesce. For equivalent thickness up to 7 nm the fs films are comprised of well separated NPs, though the mean NP size and the surface coverage increase with equivalent thickness. The mean Feret diameter for both ns- and fs-PLD films increases with increasing equivalent solid-density thickness. The surface plasmon resonance peak was observed to red shift for both ns- and fs-PLD films as the equivalent solid-density thickness was increased from 1 nm to 7 nm.
RESUMO
Conical diffraction occurs when light is incident along the optic axis of a biaxial crystal. The light spreads out into a hollow cone inside the crystal, emerging as a hollow cylinder. The intensity distribution beyond the crystal is described using an adapted paraxial wave dispersion model. We show, experimentally and theoretically, how this results in a transition from conical diffraction for wavelengths at which the crystal is aligned to double refraction for misaligned wavelengths when using a white light source. The radius of the ring and location of the focal image plane (FIP) are also observed to have a wavelength dependency. The evolution of the conically diffracted beam beyond the FIP into the far field is studied and successfully described using a theoretical model.
RESUMO
Cascade conical refraction occurs when a beam of light travels through two or more biaxial crystals arranged in series. The output beam can be altered by varying the relative azimuthal orientation of the two biaxial crystals. For two identical crystals, in general the output beam comprises a ring beam with a spot at its centre. The relative intensities of the spot and ring can be controlled by varying the azimuthal angle between the refracted cones formed in each crystal. We have used this beam arrangement to trap one microsphere within the central spot and a second microsphere on the ring. Using linearly polarized light, we can rotate the microsphere on the ring with respect to the central sphere. Finally, using a half wave-plate between the two crystals, we can create a unique beam profile that has two intensity peaks on the ring, and thereby trap two microspheres on diametrically opposite points on the ring and rotate them around the central sphere. Such a versatile optical trap should find application in optical trapping setups.
RESUMO
Internal conical diffraction by biaxial crystals with aligned optic axes, known as cascade conical diffraction is investigated. Formulae giving the intensity distributions for a cascade conically diffracted Gaussian beam are shown to compare well with experiment for the cases of two biaxial crystals with the same and different lengths and with the second crystal rotated with respect to the first. The effects of placing half wave-plates between crystals are also investigated.
RESUMO
Using a combination of internal conical diffraction and Mach-Zehnder interferometry we have theoretically and experimentally demonstrated an efficient new technique for the conversion of a linearly polarized Gaussian laser beam to one with radial polarization. These methods that can be adapted to yield either ring-shaped or first order Bessel beams which are radially polarized.
RESUMO
Internal conical diffraction produces a superposition of orthogonally polarised zero- and first-order Bessel like beams from an incident circularly polarised Gaussian beam. For right-circularly polarised light, the first-order beam has an optical vortex of charge -1. Upon propagation of the first-order beam through a second biaxial crystal, a process which is termed cascade conical refraction, the generated beam is a superposition of orthogonally polarised fields of charge 0 and -1 or 0 and -2. This spin to orbital angular momentum conversion provides a new method for the generation and annihilation of optical vortices in an all-optical arrangement that is solely dependent on the incident polarisation and vortex handedness.
Assuntos
Modelos Estatísticos , Refratometria/métodos , Simulação por Computador , Luz , Dinâmica não Linear , Espalhamento de RadiaçãoRESUMO
Conical diffraction of linearly polarised light in a biaxial crystal produces a beam with a crescent-shaped intensity profile. Rotation of the plane of polarisation produces the unique effect of spatially moving the crescent-shaped beam around a ring. We use this effect to trap microspheres and white blood cells and to position them at any angular position on the ring. Continuous motion around the circle is also demonstrated. This crescent beam does not require an interferometeric arrangement to form it, nor does it carry optical angular momentum. The ability to spatially locate a beam and an associated trapped object simply by varying the polarisation of light suggests that this optical process should find application in the manipulation and actuation of micro- and nano-scale physical and biological objects.
Assuntos
Eritrócitos/fisiologia , Eritrócitos/efeitos da radiação , Micromanipulação/instrumentação , Pinças Ópticas , Refratometria/instrumentação , Células Cultivadas , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , Luz , Espalhamento de RadiaçãoRESUMO
When a left-circularly polarised Gaussian light beam, which has spin angular momentum (SAM) J(sp) = sigmah = 1h per photon, is incident along one of the optic axes of a slab of biaxial crystal it undergoes internal conical diffraction and propagates as a hollow cone of light in the crystal. The emergent beam is a superposition of equal amplitude zero and first order Bessel like beams. The zero order beam is left-circularly polarised with zero orbital angular momentum (OAM) J(orb) = [see text]h = 0, while the first order beam is right-circularly polarized but carries OAM of J(orb) = 1h per photon. Thus, taken together the two beams have zero SAM and J(orb) = (1/2)h per photon. In this paper we examine internal conical diffraction of an elliptically polarised beam, which has fractional SAM, and demonstrate an all-optical process for the generation light beams with fractional OAM up to +/- 1h.
Assuntos
Simulação por Computador , Transferência de Energia , Luz , Pinças Ópticas , Refratometria/métodos , Espalhamento de Radiação , Distribuição NormalRESUMO
The manipulation of a Gaussian laser beam using conical diffraction in a high optical quality biaxial crystal of KGd(WO(4))(2) has been examined in detail with emphasis on the experimental techniques involved and intuitive explanations of the notable features. Two different optical arrangements were used to form the Pogendorff double-ring light pattern in the focal image plane. The formation of both diverging and non-diverging zeroth and first order Bessel beams was investigated. The various intensity distributions and polarization properties were measured and compared with the predictions of well-established theory.
RESUMO
The design and implementation of a pulsed magnetic induction device used to heat and focus a laser produced plasma in vacuum is described. Imaging of the plasma light emission and optical spectroscopy show that the UV/visible light emission is strongly enhanced, and the degree of ionization is increased. The plasma focusing is confirmed by contraction of the deposits formed by the plasma transmitted through the induction coil. The operation of the device can be described in the framework of resistive magnetohydrodynamics, where the induced currents heat the plasma and focus the plasma via the Lorentz interaction with the magnetic field.
RESUMO
We report the growth of carbon nanotubes on the size controlled iron catalytic nanoparticles. The nanotubes were grown by thermal chemical vapour deposition (CVD) in the temperature range 600-850 degrees C. The Fe films were deposited on silicon by pulsed laser deposition in vacuum. Atomic force microscopy measurements were performed on the catalytic nanoparticles. The topography of the catalytic nanoparticles shows the homogenous distribution of Fe catalyst. We observe the nanotubes are produced only at temperatures between 650 and 800 degrees C, and within this narrow temperature regime the yield of nanotubes reaches a maximum around 750 degrees C and then declines. Raman measurements illustrate a high G/D peak ratio indicating good nanotube quality. By further defining the size of the catalyst the diameter of these carbon nanotubes can be controlled.
Assuntos
Cristalização/métodos , Ferro/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Nanotecnologia/métodos , Silício/química , Catálise , Lasers , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Axi-symmetric compression and focusing of a low temperature laser produced copper plasma with an electrostatic plasma optical system was investigated for the first time. The degree of plasma concentration was quantified using Langmuir ion measurements of the ion flow and optical measurements of the thickness distributions of copper depositions on glass substrates. Both the ion flow and the deposition measurements showed strong concentration of the ion-plasma flow towards the axis. The ion current density at the focus was compressed by a factor up to 9. The on-axis deposition rate was increased by about the same factor.
RESUMO
Room-temperature ferromagnetism is observed in (110) oriented ZnO films made from targets containing 5 at. % of Sc, Ti, V, Fe, Co, or Ni, but not Cr, Mn, or Cu ions. There are large moments, 2.6 micro(B) and 0.5 micro(B)/dopant atom for Co- and Ti-containing oxides, respectively. There is also a moment of 0.3 micro(B)/Sc. Magnetization is very anisotropic, with variations of up to a factor of 3 depending on the orientation of the applied field relative to the substrate. Results are interpreted in terms of a spin-split donor impurity-band model, which can account for ferromagnetism in insulating or conducting high-k oxides with concentrations of magnetic ions that lie far below the percolation threshold. Magnetic moments are associated with two-electron defects in the films as well as unpaired electrons of the 3d ions.