RESUMO
Surface oxygen vacancy (OV) plays a pivotal role in the activation of molecular oxygen and separation of electrons and holes in photocatalysis. Herein, carbonaceous materials-modified MoO2 nanospheres with abundant surface OVs (MoO2/C-OV) were successfully synthesized via glucose hydrothermal processes. In situ introduction of carbonaceous materials triggered a reconstruction of the MoO2 surface, which introduced abundant surface OVs on the MoO2/C composites. The surface oxygen vacancies on the obtained MoO2/C-OV were confirmed via electron spin resonance spectroscopy (ESR) and X-ray photoelectron spectroscopy (XPS). The surface OVs and carbonaceous materials boosted the activation of molecular oxygen to singlet oxygen (1O2) and superoxide anion radical (â¢O2-) in selectively photocatalytic oxidation of benzylamine to imine. The conversion of benzylamine was 10 times that of pristine MoO2 nanospheres with a high selectivity under visible light irradiation at 1 atm air pressure. These results open an avenue to modify Mo-based materials for visible light-driven photocatalysis.
RESUMO
Proton-exchange membrane fuel cells (PEMFCs) are limited by their extreme sensitivity to trace-level CO impurities, thus setting a strict requirement for H2 purity and excluding the possibility to directly use cheap crude hydrogen as fuel. Herein, we report a proof-of-concept study, in which a novel catalyst comprising both Ir particles and Ir single-atom sites (IrNP @IrSA -N-C) addresses the CO poisoning issue. The Ir single-atom sites are found not only to be good CO oxidizing sites, but also excel in scavenging the CO molecules adsorbed on Ir particles in close proximity, thereby enabling the Ir particles to reserve partial active sites towards H2 oxidation. The interplay between Ir nanoparticles and Ir single-atom centers confers the catalyst with both excellent H2 oxidation activity (1.19â W cm-2 ) and excellent CO electro-oxidation activity (85â mW cm-2 ) in PEMFCs; the catalyst also tolerates CO in H2 /CO mixture gas at a level that is two times better than that of the current best PtRu/C catalyst.
RESUMO
The applications of the most promising Fe-N-C catalysts are prohibited by their limited intrinsic activities. Manipulating the Fe energy level through anchoring electron-withdrawing ligands is found effective in boosting the catalytic performance. However, such regulation remains elusive as the ligands are only uncontrollably introduced oweing to their energetically unstable nature. Herein, we report a rational manipulation strategy for introducing axial bonded O to the Fe sites, attained through hexa-coordinating Fe with oxygen functional groups in the precursor. Moreover, the O modifier is stabilized by forming the Fe-O-Fe bridge bond, with the approximation of two FeN4 sites. The energy level modulation thus created confers the sites with an intrinsic activity that is over 10 times higher than that of the normal FeN4 site. Our finding opens a novel strategy to manage coordination environments at an atomic level for high activity ORR catalysts.
RESUMO
Single-atom catalysts (SACs) are attracting widespread interest for the catalytic oxygen reduction reaction (ORR), with Fe-Nx SACs exhibiting the most promising activity. However, Fe-based catalysts suffer serious stability issues as a result of oxidative corrosion through the Fenton reaction. Herein, using a metal-organic framework as an anchoring matrix, we for the first time obtained pyrolyzed Cr/N/C SACs for the ORR, where the atomically dispersed Cr is confirmed to have a Cr-N4 coordination structure. The Cr/N/C catalyst exhibits excellent ORR activity with an optimal half-wave potential of 0.773â V versus RHE. More excitingly, the Fenton reaction is substantially reduced and, thus, the final catalysts show superb stability. The innovative and robust active site for the ORR opens a new possibility to circumvent the stability issue of the non-noble metal ORR catalysts.
RESUMO
Galvanic replacement reaction (GRR) leverages the difference in metal reduction potentials to regulate the structure of nanomaterials. The crucial aspect of constructing highly active catalysts lies in the precise manipulation of both the oxidative dissolution of sacrificial template metals and reductive deposition of alternate metals. Herein, we investigated the morphological transformation of metal Ni as a sacrificial template in the presence of different amounts of H2PtCl6 solution and the Pt4+ substitution of Ni to achieve the redistribution of elements on the catalyst surface, which provides superior performance in both the methanol oxidation reaction (MOR) and hydrogen evolution reaction (HER). The uniform distribution of Pt on a three-dimensional transition metal Ni substrate allows for the complete exposure of the noble metal to the catalyst surface. This distribution increases the reaction area, facilitating easy access for reactants and promoting electron transfer. Meanwhile, Pt (1.39 Å) has a larger atomic radius compared to Ni (1.24 Å), and the substitution reaction in the transition metal phase induces strong compressive strain, which effectively regulates the electronic structure of Ni.
RESUMO
In ZnO gas sensors, donor defects (such as zinc interstitials and oxygen vacancies) are considered active sites for the chemical adsorption and ionization of oxygen on the surface of ZnO, which can significantly enhance the sensor's response. However, the influence of the surface microstructure and phase boundaries of ZnO nanoparticles on the chemical adsorption and ionization of surface oxygen has rarely been explored. In this study, we developed a mixed-phase ZnO nanoparticle gas sensor with a rich phase boundary showing 198-50 ppm improvement in response to triethylamine at 340 °C. This is attributed to the generation of defects originating from lattice mismatch at the ZnO - zincite phase boundaries, which providing more active sites for adsorption of oxygen and triethylamine molecules. This work demonstrates a feasible method of combining surface microstructure regulation with pyrolysis strategies to develop ZnO sensors with significantly enhanced gas response performance.
RESUMO
Engineering heterostructures with a unique surface/interface structure is one of the effective strategies to develop highly active noble-metal-free catalysts for the oxygen evolution reaction (OER), because the surface/interface of catalysts is the main site for the OER. Herein, we design a coralloid NiMo(Fe)-20 catalyst with a crystalline-amorphous interface through combining a hydrothermal method and an Fe-induced surface reconfiguration strategy. That is, after Fe3+ impregnation treatment, the Ni(OH)2-NiMoO4 pre-catalyst with a complete crystalline surface is restructured into a trimetallic heterostructure with a crystalline-amorphous interface, which facilitates mass diffusion and charge transfer during the OER. As expected, self-supported NiMo(Fe)-20 exhibits excellent electrocatalytic water oxidation performance (overpotential: η-10 = 220 mV, η-100 = 239 mV) in the alkaline electrolyte, and its electrocatalytic performance hardly changes after maintaining the current density of 50 mA cm-2 for 10 hours. Furthermore, nickel foam (NF) supported commercial Pt/C and self-supported NiMo(Fe)-20 served as the cathode and anode of the Pt/CâNiMo(Fe)-20 electrolyzer, respectively, which exhibits a lower cell voltage (E-100 = 1.53 V) than that of the Pt/CâRuO2 electrolyzer (E-100 = 1.58 V) assembled with noble metal-based catalysts. The enhanced electrocatalytic performance of the NiMo(Fe)-20 catalyst is mainly attributed to the synergistic effect between the crystalline-amorphous interface and the coralloid trimetallic heterostructure.
RESUMO
Proton exchange membrane fuel cells (PEMFCs) suffer extreme CO poisoning even at PPM level (<10 ppm), owning to the preferential CO adsorption and the consequential blockage of the catalyst surface. Herein, however, we report that CO itself can become an easily convertible fuel in PEMFC using atomically dispersed Rh catalysts (Rh-N-C). With CO to CO2 conversion initiates at 0 V, pure CO powered fuel cell attains unprecedented power density at 236 mW cm-2, with maximum CO turnover frequency (64.65 s-1, 363 K) far exceeding any chemical or electrochemical catalysts reported. Moreover, this feature enables efficient CO selective removal from H2 gas stream through the PEMFC technique, with CO concentration reduced by one order of magnitude through running only one single cell, while simultaneously harvesting electricity. We attribute such catalytic behavior to the weak CO adsorption and the co-activation of H2O due to the interplay between two adjacent Rh sites.