Stabilizing the Layer-Structured Oxide Cathode by Modulating the Oxygen Redox Activity for Sodium Ion Batteries.

The layer-structured oxide cathode for sodium-ion batteries has attracted a widespread attention due to the unique redox properties and the anionic redox activity providing additional capacity. Nevertheless, such excessive oxygen redox reactions will lead to irreversible oxygen release, resulting in a rapid deterioration of the cycling stability. Herein, sulfur ion is successfully introduced to the O3-NaNi0.3Mn0.5Cu0.1Ti0.05W0.05O2 material through high-temperature quenching, thereby developing a novel Na2S-modified O3/P2-NaNi0.3Mn0.5Cu0.1Ti0.05W0.05O2 composite with extended cycling life. The S2- is analyzed for the ability to enhance the reversibility of oxidation-reduction reactions under high voltage and suppress the loss of lattice oxygen during cycling. The stable S─O covalent bonds are found to inhibit the oxygen generation and release within the structure. Benefiting from these improvements, the Na2S-modified O3/P2-NaNi0.3Mn0.5Cu0.1Ti0.05W0.05O2 exhibited a high reversible capacity of 173.1 mA h g-1 over a wide voltage range of 1.5-4.3 V under test conditions at 0.1 C and 81.5% capacity retention after 120 cycles at 1 C. The Na2S-modified O3/P2-NaNi0.3Mn0.5Cu0.1Ti0.05W0.05O2 demonstrates the excellent rate capability with the reversible capacities of 173.1,137.0,114.7,96.7, and 80.1 mA h g-1 at 0.1, 0.2, 0.5, 1, and 2 C.

Synergistic Effect of Co-Mo Pinning in Lay-Structured Oxide Cathode for Enhancing Stability toward Potassium-Ion Batteries.

Owing to the high economic efficiency and energy density potential, manganese-based layer-structured oxides have attracted great interests as cathode materials for potassium ion batteries. In order to alleviate the continuous phase transition and K+ re-embedding from Jahn-Teller distortion, the [Mn-Co-Mo]O6 octahedra are introduced into P3-K0.45MnO2 herein to optimize the local electron structure. Based on the experimental and computational results, the octahedral center metal molybdenum in [MoO6] octahedra proposes a smaller ionic radius and higher oxidation state to induce second-order JTE (pseudo-JTE) distortion in the adjacent [MnO6] octahedra. This distortion compresses the [MnO6] octahedra along the c-axis, leading to an increased interlayer spacing in the K+ layer. Meanwhile, the Mn3+/Mn4+ is balanced by [CoO6] octahedra and the K+ diffusion pathway is optimized as well. The proposed P3-K0.45Mn0.9Co0.05Mo0.05O2 cathode material shows an enhanced cycling stability and rate performance. It demonstrates a high capacity of 80.2 mAh g-1 at 100 mAh g-1 and 77.3 mAh g-1 at 500 mAh g-1. Furthermore, it showcases a 2000 cycles stability with a 59.6% capacity retention. This work presents a promising solution to the challenges faced by manganese-based layered oxide cathodes and offers a deep mechanism understanding and improved electrochemical performance.

Generalization of diffusion magnetic resonance imaging-based brain age prediction model through transfer learning.

Brain age prediction models using diffusion magnetic resonance imaging (dMRI) and machine learning techniques enable individual assessment of brain aging status in healthy people and patients with brain disorders. However, dMRI data are notorious for high intersite variability, prohibiting direct application of a model to the datasets obtained from other sites. In this study, we generalized the dMRI-based brain age model to different dMRI datasets acquired under different imaging conditions. Specifically, we adopted a transfer learning approach to achieve domain adaptation. To evaluate the performance of transferred models, brain age prediction models were constructed using a large dMRI dataset as the source domain, and the models were transferred to three target domains with distinct acquisition scenarios. The experiments were performed to investigate (1) the tuning data size needed to achieve satisfactory performance for brain age prediction, (2) the feature types suitable for different dMRI acquisition scenarios, and (3) performance of the transfer learning approach compared with the statistical covariate approach. By tuning the models with relatively small data size and certain feature types, optimal transferred models were obtained with significantly improved prediction performance in all three target cohorts (p â€‹< â€‹0.001). The mean absolute error of the predicted age was reduced from 13.89 to 4.78 years in Cohort 1, 8.34 to 5.35 years in Cohort 2, and 8.74 to 5.64 years in Cohort 3. The test-retest reliability of the transferred model was verified using dMRI data acquired at two timepoints (intraclass correlation coefficient â€‹= â€‹0.950). Clinical sensitivity of the brain age prediction model was investigated by estimating the brain age in patients with schizophrenia. The prediction made by the transferred model was not significantly different from that made by the reference model. Both models predicted significant brain aging in patients with schizophrenia as compared with healthy controls (p â€‹< â€‹0.001); the predicted age difference of the transferred model was 4.63 and 0.26 years for patients and controls, respectively, and that of the reference model was 4.39 and -0.09 years, respectively. In conclusion, transfer learning approach is an efficient way to generalize the dMRI-based brain age prediction model. Appropriate transfer learning approach and suitable tuning data size should be chosen according to different dMRI acquisition scenarios.

Binder-Free and Carbon-Free 3D Porous Air Electrode for Li-O2 Batteries with High Efficiency, High Capacity, and Long Life.

Pt-Gd alloy polycrystalline thin film is deposited on 3D nickel foam by pulsed laser deposition method serving as a whole binder/carbon-free air electrode, showing great catalytic activity enhancement as an efficient bifunctional catalyst for the oxygen reduction and evolution reactions in lithium oxygen batteries. The porous structure can facilitate rapid O2 and electrolyte diffusion, as well as forming a continuous conductive network throughout the whole energy conversion process. It shows a favorable cycle performance in the full discharge/charge model, owing to the high catalytic activity of the Pt-Gd alloy composite and 3D porous nickel foam structure. Specially, excellent cycling performance under capacity limited mode is also demonstrated, in which the terminal discharge voltage is higher than 2.5 V and the terminal charge voltage is lower than 3.7 V after 100 cycles at a current density of 0.1 mA cm(-2) . Therefore, this electrocatalyst is a promising bifunctional electrocatalyst for lithium oxygen batteries and this depositing high-efficient electrocatalyst on porous substrate with polycrystalline thin film by pulsed laser deposition is also a promising technique in the future lithium oxygen batteries research.

A Metal-Free, Free-Standing, Macroporous Graphene@g-C3N4 Composite Air Electrode for High-Energy Lithium Oxygen Batteries.

The nonaqueous lithium oxygen battery is a promising candidate as a next-generation energy storage system because of its potentially high energy density (up to 2-3 kW kg(-1)), exceeding that of any other existing energy storage system for storing sustainable and clean energy to reduce greenhouse gas emissions and the consumption of nonrenewable fossil fuels. To achieve high energy density, long cycling stability, and low cost, the air electrode structure and the electrocatalysts play important roles. Here, a metal-free, free-standing macroporous graphene@graphitic carbon nitride (g-C3N4) composite air cathode is first reported, in which the g-C3N4 nanosheets can act as efficient electrocatalysts, and the macroporous graphene nanosheets can provide space for Li2O2 to deposit and also promote the electron transfer. The electrochemical results on the graphene@g-C3N4 composite air electrode show a 0.48 V lower charging plateau and a 0.13 V higher discharging plateau than those of pure graphene air electrode, with a discharge capacity of nearly 17300 mA h g(-1)(composite) . Excellent cycling performance, with terminal voltage higher than 2.4 V after 105 cycles at 1000 mA h g(-1)(composite) capacity, can also be achieved. Therefore, this hybrid material is a promising candidate for use as a high energy, long-cycle-life, and low-cost cathode material for lithium oxygen batteries.

Electron Sponge Effect by Dynamic-Regulated Electron Self-Flow toward Coupled Electrochemical Ammonia Synthesis.

A dynamic-regulated Pd-Fe-N electrocatalyst was effectively constructed with electron-donating and back-donating effects, which serves as an efficient engineering strategy to optimize the electrocatalytic activity. The designed PdFe3/FeN features a comprehensive electrocatalytic performance toward the nitrogen reduction reaction (NRR, yield rate of 29.94 µg h-1 mgcat-1 and FE of 38.43% at -0.2 V vs RHE) and oxygen evolution reaction (OER, 308 mV at 100 mA cm-2). Combining in situ ATR-FTIR, XAS, and DFT results, the role of the interstitial-N-dopant-induced electron sponge effect has been significantly elucidated in strengthening the electrocatalytic NRR process. Specifically, the introduction of a N dopant, an electron acceptor, initiates the generation of robust Lewis-acidic Fe sites, facilitating free N2 capture and bonding. Simultaneously, after NH3 adsorption, the N dopant can back-donate electrons to Fe sites, strengthening the NH3 deportation through weakening the Lewis acidity of Fe centers. Besides, the electron-deficient Fe sites contribute to the reconstruction of FeOOH, the real active species during the OER, which accelerates the four-electron reaction kinetics. This research offers a perspective on electrocatalyst design, potentially facilitating the evolution of advanced material engineering for efficient electrocatalytic synthesis and energy storage.

Polymetal-Chelated Fabrication of Bimetallic Nanophosphides as Electrocatalysts for Zinc-Air Batteries.

Bimetallic phosphides are considered as promising electrocatalysts for zinc-air batteries toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). To address the semi-conductor inherent low electronic conductivity and catalytic activity, a polymetal-chelated strategy is employed to in situ fabricate bimetallic nanophosphides within carbon matrix anchoring by chemical bonding. The employment of biomolecule polydopamine (PDA) efficiently anchors various transition metal ions due to its strong chelating capability via inherent functional groups. Furthermore, the chelation of multi-metal ion is proved to promote the formation of graphitic nitrogen. The bimetallic FexCoyP phosphides nanoparticles are intimately encapsulated in carbon matrix through in situ carbonization and phosphatization processes. When utilized in Zinc-air batteries, Fe0.20Co0.80P anchored within N, P co-doped sub-microsphere (Fe0.20Co0.80P /PNC) exhibit a maximum power density of 167 mW cm-2 and cycle life up to 270 cycles, with a round-trip voltage of 0.955 V. The mechanisms for catalytic activity passivation are ascribed to the etching of nitrogen and oxidation of phosphorus in carbon matrix, as well as the oxidation of the surface phosphide on the sub-microspheres. This study presents a promising candidate for advancing the further development of energy conversation catalysis.

Ambient Electrochemical Ammonia Synthesis: From Theoretical Guidance to Catalyst Design.

Ammonia, a vital component in the synthesis of fertilizers, plastics, and explosives, is traditionally produced via the energy-intensive and environmentally detrimental Haber-Bosch process. Given its considerable energy consumption and significant greenhouse gas emissions, there is a growing shift toward electrocatalytic ammonia synthesis as an eco-friendly alternative. However, developing efficient electrocatalysts capable of achieving high selectivity, Faraday efficiency, and yield under ambient conditions remains a significant challenge. This review delves into the decades-long research into electrocatalytic ammonia synthesis, highlighting the evolution of fundamental principles, theoretical descriptors, and reaction mechanisms. An in-depth analysis of the nitrogen reduction reaction (NRR) and nitrate reduction reaction (NitRR) is provided, with a focus on their electrocatalysts. Additionally, the theories behind electrocatalyst design for ammonia synthesis are examined, including the Gibbs free energy approach, Sabatier principle, d-band center theory, and orbital spin states. The review culminates in a comprehensive overview of the current challenges and prospective future directions in electrocatalyst development for NRR and NitRR, paving the way for more sustainable methods of ammonia production.

Layer-Structured Multitransition-Metal Oxide Cathode Materials for Potassium-Ion Batteries with Long Cycling Lifespan and Superior Rate Capability.

Manganese (Mn)-based layer-structured transition metal oxides are considered as excellent cathode materials for potassium ion batteries (KIBs) owing to their low theoretical cost and high voltage plateau. The energy density and cycling lifetime, however, cannot simultaneously satisfy the basic requirements of the market for energy storage systems. One of the primary causes results from the complex structural transformation and transition metal migration during the ion intercalation and deintercalation process. The orbital and electronic structure of the octahedral center metal element plays an important role for maintaining the octahedral structural integrity and improving the K+ diffusivity by the introduced heterogeneous [Me-O] chemical bonding. A multitransition metal oxide, P3-type K0.5Mn0.85Co0.05Fe0.05Al0.05O2 (KMCFAO), was synthesized and employed as a cathode material for KIBs. Beneficial from the larger layer spacing for K+ to better accommodate and effectively preventing the irreversible structural transformation in the insertion/extraction process, it can reach a superior capacity retention up to 96.8% after 300 cycles at a current density of 500 mA g-1. The full cell of KMCFAO//hard carbon exhibits an encouraging promising energy density of 113.8 W h kg-1 at 100 mA g-1 and a capacity retention of 72.6% for 500 cycles.

New Phosphate Zn2Fe(PO4)2 Cathode Material for Nonaqueous Zinc Ion Batteries with Long Life Span.

Phosphate-based cathode materials attract much more attention and are widely used as energy storage materials based on their high economic efficiency and eco-friendly property, their stable potential plateau, and their high thermodynamic stability. A new phosphate family member, Zn2Fe(PO4)2 (ZFP), was successfully explored and synthesized by the scalable high-temperature annealing method, followed by coating a thin carbon layer to optimize the electrotonic conductivity. This obtained ZFP featuring with a tunnel structure can be utilized as a cathode material for Zn2+ ion extraction and insertion, in which Zn2+ ion diffusion behaviors primarily contribute the specific capacity. Based on the actual reversible capacity of ZFP@C of 73 mA h g-1, the application for zinc ion batteries (ZIBs) has potential due to its long life span. The electrochemical performance is primarily contributed from the high Zn2+ ion diffusion rate and low apparent activation energy. This new explored ZFP can accelerate the development of realizing ZIBs with long life span.

A strategy for anode modification for future zinc-based battery application.

In the past several years, rechargeable zinc batteries, featuring the merits of low cost, environmental friendliness, easy manufacturing, and enhanced safety, have, attracted much attention. Zinc (Zn) anodes for zinc metal batteries play an important role. In this review, the fundamental understanding of these batteries and modification strategies to deal with the problematic issues for Zn anodes, including dendrite growth, corrosion, and the hydrogen evolution phenomenon will be summarized. The practical application of Zn anodes can still lead to Zn dendrites, various side reactions, and serious safety risks. Therefore, metal-free anodes for "rocking chair" zinc ion batteries to replace Zn anodes are systemically reviewed. The performance and the zinc storage mechanism of metal-free anodes will be discussed. Subsequently, a "rocking chair" zinc ion battery prototype selected as a recent example is assessed to explore the merits and demerits of Zn anodes and metal-free anodes. To conclude, a perspective on the future of zinc metal batteries and "rocking chair" zinc ion batteries is presented. It is hoped that this review may provide for further improvement of commercial rechargeable zinc batteries.

Metallic-State MoS2 Nanosheets with Atomic Modification for Sodium Ion Batteries with a High Rate Capability and Long Lifespan.

Exploring active materials with a high rate capability and long lifespan for sodium ion batteries attracts much more attention and plays an important role in realizing clean energy storage and conversion. The strategy of optimizing the electronic structure by atomic element substitution within MoS2 layers was employed to change the inherent physical property. The enhanced electronic conductivity from a decreased bandgap and increased surface Na+ adsorption energy can efficiently and dramatically optimize the electrochemical performance for sodium storage. Attempting to limit the large volume variation and avoid MoS2 nanosheet stacking and restacking, numerous nanosheets are in situ grown into a designed hierarchical mesopore carbon matrix. This structure can tightly capture the nanosheets to prevent them from aggregating and offer a sufficient buffer zone for alleviating severe volume changes during the discharging/charging process, contributing remarkably to the structural integrity and superior rate performance of electrodes.

The Current Process for the Recycling of Spent Lithium Ion Batteries.

With the development of electric vehicles involving lithium ion batteries as energy storage devices, the demand for lithium ion batteries in the whole industry is increasing, which is bound to lead to a large number of lithium ion batteries in the problem of waste, recycling and reuse. If not handled properly, it will certainly have a negative impact on the environment and resources. Current commercial lithium ion batteries mainly contain transition metal oxides or phosphates, aluminum, copper, graphite, organic electrolytes containing harmful lithium salts, and other chemicals. Therefore, the recycling and reuse of spent lithium ion batteries has been paid more and more attention by many researchers. However, due to the high energy density, high safety and low price of lithium ion batteries have great differences and diversity, the recycling of waste lithium ion batteries has great difficulties. This paper reviews the latest development of the recovery technology of waste lithium ion batteries, including the development of recovery process and products. In addition, the challenges and future economic and application prospects are described.

Bimetallic Sulfide Sb2S3@FeS2 Hollow Nanorods as High-Performance Anode Materials for Sodium-Ion Batteries.

Constructing a heterojunction and introducing an interfacial interaction by designing ideal structures have the inherent advantages of optimizing electronic structures and macroscopic mechanical properties. An exquisite hierarchical heterogeneous structure of bimetal sulfide Sb2S3@FeS2 hollow nanorods embedded into a nitrogen-doped carbon matrix is fabricated by a concise two-step solvothermal method. The FeS2 interlayer expands in situ grow on the interface of hollow Sb2S3 nanorods within the nitrogen-doped graphene matrix, forming a delicate heterostructure. Such a well-designed architecture affords rapid Na+ diffusion and improves charge transfer at the heterointerfaces. Meanwhile, the strongly synergistic coupling interaction among the interior Sb2S3, interlayer FeS2, and external nitrogen-doped carbon matrix creates a stable nanostructure, which extremely accelerates the electronic/ion transport and effectively alleviates the volume expansion upon long cyclic performance. As a result, the composite, as an anode material for sodium-ion batteries, exhibits a superior rate capability of 537.9 mAh g-1 at 10 A g-1 and excellent cyclic stability with 85.7% capacity retention after 1000 cycles at 5 A g-1. Based on the DFT calculation, the existing constructing heterojunction in this composite can not only optimize the electronic structure to enhance the conductivity but also favor the Na2S adsorption energy to accelerate the reaction kinetics. The outstanding electrochemical performance sheds light on the strategy by the rational design of hierarchical heterogeneous nanostructures for energy storage applications.

Surface Stabilization of O3-type Layered Oxide Cathode to Protect the Anode of Sodium Ion Batteries for Superior Lifespan.

Even though the energy density of O3-type layer-structured metal oxide cathode can fully reach the requirement for large-scale energy storage systems, the cycling lifespan still cannot meet the demand for practical application once it is coupled with a non-sodium-metal anode in full-cell system. Transition metal dissolution into the electrolyte occurs along with continuous phase transformation and accelerates deterioration of the crystal structure, followed by migration and finally deposition on the anode to form a vicious circle. Surface engineering techniques are employed to modify the interface between active materials and the electrolyte by coating them with a thin layer of AlPO4 ion conductor. This stable thin layer can stabilize the surface crystal structure of the cathode material by avoiding element dissolution. Meanwhile, it can protect the anode from increased resistance by suppressing the dissolution-migration-deposition process. This technique is a promising method to improve the lifetime for the future commercialization.

Binder-Free 3D Integrated Ni@Ni3Pt Air Electrode for Zn-Air Batteries.

Developing an air electrode with high efficiency and stable performance is essential to improve the energy conversion efficiency and lifetime of zinc-air battery. Herein, Ni3Pt alloy is deposited on 3D nickel foam by a pulsed laser deposition method, working as a stable binder-free air electrode for rechargeable zinc-air batteries. The polycrystalline Ni3Pt alloy possesses high oxygen-conversion catalytic activity, which is highly desirable for the charge and discharge process in zinc-air battery. Meanwhile, this sample technique constructs an integrated and stable electrode structure, which not only has a 3D architecture of high conductivity and porosity but also produces a uniform Ni3Pt strongly adhering to the substrate, favoring rapid gas and electrolyte diffusion throughout the whole energy conversion process. Employed as an air electrode in zinc-air batteries, it exhibits a small charge and discharge gap of below 0.62 V at 10 mA cm-2, with long cycle life of 478 cycles under 10 min per cycle. Furthermore, benefitting from the structural advantages, a flexible device exhibits similar electrochemical performance even under the bending state. The high performance resulting from this type of integrated electrode in this work paves the way of a promising technique to fabricate air electrodes for zinc-air batteries.

Metallic-State SnS2 Nanosheets with Expanded Lattice Spacing for High-Performance Sodium-Ion Batteries.

Metallic-state 2D SnS2 nanosheets with expanded lattice spacing and a defect-rich structure were synthesized by the intercalation of Ni into the van der Waals gap of SnS2 . The expanded lattice spacing efficiently enhanced the electrochemical performance of the SnS2 for sodium-ion batteries owing to the change electron state density and energy band structure. In operando synchrotron XRD and theoretical calculations were used to gain insight into the influence of foreign metal-ion doping and its location. The optimized architecture obtained by in situ uniform growth of nanosheets on carbon fibers significantly enhanced the electrochemical performance. The inherent advantages of this architecture are shorter paths for ion insertion and extraction, larger contact area for more sodium diffusion pathways, and superior electrolyte penetration. Benefiting from the Ni intercalated SnS2 bilayer, the internal adjustment of the electronic state and the enlarged interlayer spacing significantly enhanced the electron transport kinetics, which can be explained by the metallic-state properties. The integrated electrode exhibited an initial high reversible capacity of 795 mAh g-1 at 0.1 A g-1 , with a stable capacity retention of 666 mAh g-1 after 100 cycles. Good rate capability was also exhibited with specific capacities of 691, 564, 437 mAh g-1 at current densities of 200, 500, and 1000 mA g-1 , respectively.

Targeting human 8-oxoguanine DNA glycosylase to mitochondria protects cells from high glucose-induced apoptosis.

PURPOSE: Diabetic retinopathy (DR) is a major vision threatening disease mainly induced by high glucose. Despite great efforts were made to explore the etiology of DR, the exact mechanism responsible for its pathogenesis remains elusive. METHODS: In our study, we constructed diabetic rats via Streptozotocin (STZ) injection. TUNEL assay was employed to examine retinal cell apoptosis. The levels of mitochondrial membrane potential (MMP) and reactive oxygen species (ROS) were analyzed via flow cytometry. The mRNA and protein levels of mitochondrial respiratory chain were investigated by RT-qPCR and western blot. RESULTS: Compared with normal rats, the retinal cell apoptosis rate in diabetic rats was significantly upregulated. What's more, the signals of 8-OHdG and the levels of Cytochrome C in diabetic rats were enhanced; however, the MnSOD signals and NADPH-1 levels were reduced. We investigated the effect of mitochondrialy targeted hOGG1 (MTS-hOGG1) on the primary rRECs under high glucose. Compared with vector-transfected cells, MTS-hOGG1-expressing cells blocked high glucose-induced cell apoptosis, the loss of MMP and the overproduction of ROS. In addition, under high glucose, MTS-hOGG1 transfection blocked the expression of Cytochrome C, but enhanced the expression of cytochrome c oxidase subunit 1 and NADPH-1. CONCLUSIONS: These findings indicated that high glucose induced cell apoptosis by causing the loss of MMP, the overproduction of ROS and mtDNA damage. Targeting DNA repair enzymes hOGG1 in mitochondria partly mitigated the high glucose-induced consequences, which shed new light for DR therapy.

Three-Dimensional Array of TiN@Pt3Cu Nanowires as an Efficient Porous Electrode for the Lithium-Oxygen Battery.

The nonaqueous lithium-oxygen battery is a promising candidate as a next-generation energy storage system because of its potentially high energy density (up to 2-3 kW kg-1), exceeding that of any other existing energy storage system for storing sustainable and clean energy to reduce greenhouse gas emissions and the consumption of nonrenewable fossil fuels. To achieve high round-trip efficiency and satisfactory cycling stability, the air electrode structure and the electrocatalysts play important roles. Here, a 3D array composed of one-dimensional TiN@Pt3Cu nanowires was synthesized and employed as a whole porous air electrode in a lithium-oxygen battery. The TiN nanowire was primarily used as an air electrode frame and catalyst support to provide a high electronic conductivity network because of the high-orientation one-dimensional crystalline structure. Meanwhile, deposited icosahedral Pt3Cu nanocrystals exhibit highly efficient catalytic activity owing to the abundant {111} active lattice facets and multiple twin boundaries. This porous air electrode comprises a one-dimensional TiN@Pt3Cu nanowire array that demonstrates excellent energy conversion efficiency and rate performance in full discharge and charge modes. The discharge capacity is up to 4600 mAh g-1 along with an 84% conversion efficiency at a current density of 0.2 mA cm-2, and when the current density increased to 0.8 mA cm-2, the discharge capacity is still greater than 3500 mAh g-1 together with a nearly 70% efficiency. This designed array is a promising bifunctional porous air electrode for lithium-oxygen batteries, forming a continuous conductive and high catalytic activity network to facilitate rapid gas and electrolyte diffusion and catalytic reaction throughout the whole energy conversion process.

[Discussion on logarithmic visual acuity chart and five grade notation].

To explore the scientific aspect of logarithmic visual acuity chart and five grade notation, a visual test-type ten times large as the test-type of 4.0 grade was put 0.5 m before the eye, if the eye saw it, then the visual acuity was 2.0 grade (visual angle 1000' = 16.67 degrees). If moving this test-type to 0.05 m before the eye, 1.0 grade (visual angle 10 000' = 166.7 degrees) was obtained. They are more scientific than original records: hand movement for 2.0 grade and light perception for 1.0 grade. These test-type theoretically satisfy the demand of 5 grade notation. Logarithmic visual acuity chart and 5 grade notation is more superior subject created in China.