RESUMO
The bicyclic 1,2-substituted, 1,3-diene monomer nopadiene (1R,5S)-2-ethenyl-6,6-dimethylbicyclo[3.1.1]hept-2-ene was successfully polymerized by anionic and catalytic polymerization. Nopadiene is produced either through a facile one-step synthesis from myrtenal via Wittig-olefination or via a scalable two-step reaction from nopol (10-hydroxymethylene-2-pinene). Both terpenoids originate from the renewable ß-pinene. The living anionic polymerization of nopadiene in apolar and polar solvents at 25 °C using organolithium initiators resulted in homopolymers with well-controlled molar masses in the range of 5.6-103.4 kg·mol-1 (SEC, PS calibration) and low dispersities (D) between 1.06 and 1.18. By means of catalytic polymerization with Me4CpSi(Me)2NtBuTiCl2 and (Flu)(Pyr)CH2Lu(CH2TMS)2(THF), the 1,4 and 3,4- microstructures of nopadiene are accessible in excellent selectivity. In pronounced contrast to other 1,3-dienes, the rigid polymers of the sterically demanding nopadiene showed an elevated glass temperature, Tg,∞ = 160 °C (in the limit of very high molar mass, Mn). ABA triblock copolymers with a central polymyrcene block and myrcene content of 60-75 mol %, with molar masses of 100-200 kg/mol were prepared by living anionic polymerization of the pinene-derivable monomers nopadiene and myrcene. This diene copolymerization resulted in thermoplastic elastomers displaying nanophase separation at different molar ratios (DSC, SAXS) and an upper service temperature about 30 K higher than that for traditional petroleum-derived styrenic thermoplastic elastomers due to the high glass temperature of polynopadiene. The materials showed good thermal stability at elevated temperatures under nitrogen (TGA), promising tensile strength and ultimate elongation of up to 1600%.
RESUMO
The concept of hierarchical bottom-up structuring commonly encountered in natural materials provides inspiration for the design of complex artificial materials with advanced functionalities. Natural processes have achieved the orchestration of multicomponent systems across many length scales with very high precision, but man-made self-assemblies still face obstacles in realizing well-defined hierarchical structures. In particle-based self-assembly, the challenge is to program symmetries and periodicities of superstructures by providing monodisperse building blocks with suitable shape anisotropy or anisotropic interaction patterns ('patches'). Irregularities in particle architecture are intolerable because they generate defects that amplify throughout the hierarchical levels. For patchy microscopic hard colloids, this challenge has been approached by using top-down methods (such as metal shading or microcontact printing), enabling molecule-like directionality during aggregation. However, both top-down procedures and particulate systems based on molecular assembly struggle to fabricate patchy particles controllably in the desired size regime (10-100 nm). Here we introduce the co-assembly of dynamic patchy nanoparticles--that is, soft patchy nanoparticles that are intrinsically self-assembled and monodisperse--as a modular approach for producing well-ordered binary and ternary supracolloidal hierarchical assemblies. We bridge up to three hierarchical levels by guiding triblock terpolymers (length scale â¼10 nm) to form soft patchy nanoparticles (20-50 nm) of different symmetries that, in combination, co-assemble into substructured, compartmentalized materials (>10 µm) with predictable and tunable nanoscale periodicities. We establish how molecular control over polymer composition programs the building block symmetries and regulates particle positioning, offering a route to well-ordered mixed mesostructures of high complexity.
RESUMO
Polycations are popular agents for nonviral delivery of DNA to mammalian cells. Adding hydrophobic, biodegradable, or cell-penetrating functions could help to improve their performance, which at present is below that of viral agents. A crucial first step in gene delivery is the complexation of the DNA. The characteristics of these "polyplexes" presumably influence or even determine the subsequent steps of membrane passage, intracellular traveling/DNA release, and nuclear uptake. Herein, polyplexes formed with linear poly(ethylenimine) (l-PEI) are compared to complexes generated with functionalized diblock copolymers. While l-PEI interacts only electrostatically with the DNA, interaction in the case of the diblock polymers may be mixed-mode. In certain cases, transfection efficiency improved when the polyplexes were formed in hypertonic solution. Moreover, whereas conventional PEI-based polyplexes enter the cells via endocytosis, at least one of the diblock agents seemed to promote entry via transient destabilization of the plasma membrane.
Assuntos
DNA/química , Plasmídeos/química , Polietilenoimina/química , Animais , Materiais Biocompatíveis/química , Células CHO , Linhagem Celular , Cricetulus , Endocitose/efeitos dos fármacos , Técnicas de Transferência de Genes , Células HEK293 , Humanos , Interações Hidrofóbicas e Hidrofílicas , Camundongos , Tamanho da Partícula , Poliaminas/química , Polieletrólitos , Eletricidade Estática , TransfecçãoRESUMO
A block copolymer-based assembly approach for the creation of nano-patterned polyelectrolyte multilayers over cm2-scale areas is presented. Up to 5 bi-layers were selectively assembled on top of specific nano-domains featuring different morphologies. The successful isolation of nanoscale objects corresponding in shape to the template features is also demonstrated. This methodology is applicable to different types of polyelectrolytes, and opens up a new dimension for layer-by-layer construction.
RESUMO
Nano-patterned materials are beneficial for applications such as solar cells, opto-electronics, and sensing owing to their periodic structure and high interfacial area. Here, we present a non-lithographic approach for assembling polyelectrolytes into periodic nanoscale patterns over cm(2)-scale areas. Chemically modified block copolymer thin films featuring alternating charged and neutral domains are used as patterned substrates for electrostatic self-assembly. In-depth characterization of the deposition process using spectroscopy and microscopy techniques, including the state-of-the-art scanning transmission X-ray microscopy (STXM), reveals both the selective deposition of the polyelectrolyte on the charged copolymer domains as well as gradual changes in the film topography that arise from further penetration of the solvent molecules and possibly also the polyelectrolyte into these domains. Our results demonstrate the feasibility of creating nano-patterned polyelectrolyte layers, which opens up new opportunities for structured functional coating fabrication.
RESUMO
The formation of copper nanoparticles (Cu-NPs) in irradiated aqueous solutions of star-shaped poly(acrylic acid) (PAA) were studied at two pH values. Transmission electron microscopy (TEM) demonstrates that the star-shaped macromolecules loaded with Cu(2+) ions can act as individual nanosized containers providing a perfect control over the size and size distribution of Cu-NPs. Electron paramagnetic resonance (EPR) and optical spectroscopy show a transformation of mechanisms controlling the reduction of Cu(2+) ions and the further formation of Cu-NPs. At pH 2.9, Cu-NPs are formed from the aquacomplexes of Cu(2+) ions through homogeneous nucleation. At pH 4.3, the formation of Cu-NPs occurs inside macromolecular containers loaded with Cu(2+) ions, which are bound to carboxylic groups of the polyelectrolyte. In the latter case, Cu-NPs apparently ripen from preformed hydrated Cu2O seeds, which are thought to result from the ultrasmall (Cu(2+))m(OH(-))k(COO(-))n species, thus implying a heterogeneous nucleation.
Assuntos
Cobre/química , Nanopartículas Metálicas/química , Polímeros/química , Eletrólitos/química , Tamanho da Partícula , Soluções , Propriedades de Superfície , Água/químicaRESUMO
The morphologies and corona compositions in aggregates of mixtures of PS-b-PAA and PS-b-P4VP diblock copolymers are influenced by controllable assembly parameters such as water content, block copolymer molar ratios, and solvent effects as well as the hydrophilic block lengths and block length ratios. All these factors can affect the morphology of the aggregates as well as their corona composition, the latter especially in vesicles, where two interfaces are involved. The morphologies and corona compositions of the aggregates were investigated by transmission electron microscopy and electrophoretic mobility, respectively. They depend, to a large extent, on the solubility of P4VP and PAA in the given organic solvent (e.g., DMF, THF, or dioxane), which influences the coil dimensions of the hydrophilic chains. The water content affects both the size and the shape of the block copolymer aggregates as well as the corona composition. Water acts as a precipitant for the hydrophobic block in the common solvent and, therefore, its progressive addition to the solution changes the interaction parameter with the hydrophobic block. The block copolymer molar ratio has an effect on both the morphology and the corona composition of the aggregates. With increasing PS-b-P4VP content in the mixture, the morphology transforms gradually from large compound micelles (LCMs), through coexistence of LCMs and small spherical micelles (SSMs), and eventually to vesicles. As expected, the corona composition of the aggregates is also affected by the block copolymer molar ratio, and changes progressively from pure PAA to a mixture of PAA and P4VP and to pure P4VP with increasing PS-b-P4VP content. It is clear that the use of mixtures of the soluble chains offers the opportunity of fine-tuning the corona composition in block copolymer aggregates under assembly conditions.
RESUMO
The corona compositions and morphologies in aggregates of mixtures of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA) and polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymers are influenced by controllable assembly parameters such as the hydrophilic block length and solution pH. The morphologies and corona compositions of the aggregates were investigated by transmission electron microscopy and electrophoretic mobility, respectively. When mineral acids or bases are present during aggregate formation, they can exert a strong influence on the corona composition. Morphology changes were also seen with changing pH, as well as changes in corona composition, specifically for vesicles. Because of complications introduced by the presence of ions, the general hypothesis that the external corona of the vesicles is composed of the longer chains, while the shorter chains form the inner corona, which is valid only in mixtures containing only nonionic chains without any additives (no acids or bases) or within a well-defined narrow pH range. In addition to the numerical block lengths and the pH, the solubility of the hydrophilic blocks can also influence the morphology and as well as the interfacial composition of vesicles; as the numerically longer chains become less soluble, they can contract and move to the interior, while the numerically shorter but more soluble chains go to the external corona. A remarkable morphological feature of the pH continuum is that for some compositions vesicles are observed in four distinct pH regions, separated by pH ranges in which other morphologies dominate. The effect of pH and microion content on coil dimensions of the PVP and PAA chains in the block copolymers is most likely responsible for the observed behavior.
RESUMO
The synthesis of well-defined cylindrical polymer brushes (CPBs) from a linear polymer backbone with a high density of RAFT functionalities ("grafting from" approach) is challenging when the chain transfer agent (CTA) is attached to the backbone via its R-group. It is proposed that the difficulties of the R-group approach in controlling the grafting polymerization are induced by the "entrapment" of active free radicals within individual growing CPBs. A facile "CTA-shuttled" R-group approach overcoming this entrapment effect is developed, and used to synthesize well-defined CPBs with polystyrene or poly(tert-butyl acrylate) branches and core-shell CPBs with polystyrene-block-poly(N-isopropylacrylamide) branches. The polydispersity index (PDI = 1.23) of the obtained CPBs with polystyrene branches is much lower than that from the conventional R-group approach (PDI = 2.18). Monte Carlo simulations confirm that the advantage of the "CTA-shuttled" R-group approach consists in the release of the active radicals from the trapping CPB systems.
Assuntos
Polímeros/química , PolimerizaçãoRESUMO
Imitating the natural "energy cascade" architecture, we present a single-molecular rod-like nano-light harvester (NLH) based on a cylindrical polymer brush. Block copolymer side chains carrying (9,9-diethylfluoren-2-yl)methyl methacrylate units as light absorbing antennae (energy donors) are tethered to a linear polymer backbone containing 9-anthracenemethyl methacrylate units as emitting groups (energy acceptors). These NLHs exhibit very efficient energy absorption and transfer. Moreover, we manipulate the energy transfer by tuning the donor-acceptor distance.
Assuntos
Luz , Nanotecnologia , Transferência de Energia , Polímeros/química , Análise Espectral/métodosRESUMO
We investigate the self-assembly behavior of Janus particles with different geometries at a liquid-liquid interface. The Janus particles we focus on are characterized by a phase separation along their major axis into two hemicylinders of different wettability. We present a combination of experimental and simulation data together with detailed studies elucidating the mechanisms governing the adsorption process of Janus spheres, Janus cylinders, and Janus discs. Using the pendant drop technique, we monitor the assembly kinetics following changes in the interfacial tension of nanoparticle adsorption. According to the evolution of the interfacial tension and simulation data, we will specify the characteristics of early to late stages of the Janus particle adsorption and discuss the effect of Janus particle shape and geometry. The adsorption is characterized by three adsorption stages which are based on the different assembly kinetics and different adsorption mechanisms depending on the particle shape.
Assuntos
Tolueno/química , Água/química , Adsorção , Nanopartículas/química , Tamanho da Partícula , Propriedades de Superfície , MolhabilidadeRESUMO
Monodisperse, magnetic nanoparticles as vectors for gene delivery were successfully synthesized via the grafting-from approach. First, oleic acid stabilized maghemite nanoparticles (γ-Fe2O3) were encapsulated with silica utilizing a reverse microemulsion process with simultaneous functionalization with initiating sites for atom transfer radical polymerization (ATRP). Polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the core-shell nanoparticles led to core-shell-corona hybrid nanoparticles (γ-Fe2O3@silica@PDMAEMA) with an average grafting density of 91 polymer chains of DP(n) = 540 (PDMAEMA540) per particle. The permanent attachment of the arms was verified by field-flow fractionation. The dual-responsive behavior (pH and temperature) was confirmed by dynamic light scattering (DLS) and turbidity measurements. The interaction of the hybrid nanoparticles with plasmid DNA at various N/P ratios (polymer nitrogen/DNA phosphorus) was investigated by DLS and zeta-potential measurements, indicating that for N/P ≥ 7.5 the complexes bear a positive net charge and do not undergo secondary aggregation. The hybrids were tested as transfection agents under standard conditions in CHO-K1 and L929 cells, revealing transfection efficiencies >50% and low cytotoxicity at N/P ratios of 10 and 15, respectively. Due to the magnetic properties of the hybrid gene vector, it is possible to collect most of the cells that have incorporated a sufficient amount of magnetic material by using a magnetic activated cell sorting system (MACS). Afterward, cells were further cultivated and displayed a transfection efficiency of ca. 60% together with a high viability.
Assuntos
Separação Celular/métodos , Compostos Férricos/química , Metacrilatos/química , Nanopartículas/química , Ácidos Polimetacrílicos/síntese química , Animais , Células CHO , Sobrevivência Celular/efeitos dos fármacos , Cricetinae , Cricetulus , Concentração de Íons de Hidrogênio , Dose Letal Mediana , Fenômenos Magnéticos , Camundongos , Nanopartículas/toxicidade , Tamanho da Partícula , Polimerização , Ácidos Polimetacrílicos/química , Transfecção/métodosRESUMO
Interpolyelectrolyte complexes (IPECs) are typically formed when two polyelectrolytes of opposite charge are mixed together in solution. We present an overview of different strategies for the preparation of micellar IPECs, i.e., structures where such IPEC domains form the core or the shell of micelles. In addition, vesicular architectures are considered, where the IPEC domain forms a membrane layer. One intriguing feature of IPECs is that their formation can be directed, their stability towards changes in pH or ionic strength can (to a certain extent) be predicted, and their size can be controlled. Especially the use of ionic/non-ionic block copolymers offers unique potential for the preparation of well-defined and sophisticated nanostructured materials. We also discuss possible applications, especially in the field of life sciences, including biocompatibility, the controlled uptake/release of guest substances, the immobilization of enzymes, or the controlled formation of inorganic/organic hybrid materials.
RESUMO
Nanostructured inverse hexagonal polyoxometalate composite films were cast directly from solution using poly(butadiene-block-2-(dimethylamino)ethyl methacrylate) (PB-b-PDMAEMA) diblock copolymers as structure directing agents for phosphomolybdic acid (H(3)[PMo(12)O(40)], H(3)PMo). H(3)PMo units are selectively incorporated into the PDMAEMA domains due to electrostatic interactions between protonated PDMAEMA and PMo(3-) anions. Long solvophilic PB chains stabilized the PDMAEMA/H(3)PMo aggregates in solution and reliably prevented macrophase separation. The choice of solvent is crucial. It appears that all three components, both blocks of the diblock copolymer as well as H(3)PMo, have to be soluble in the same solvent which turned out to be tetrahydrofuran, THF. Evaporation induced self-assembly resulted in highly ordered inverse hexagonal nanocomposite films as observed from transmission electron microscopy and small-angle X-ray scattering. This one-pot synthesis may represent a generally applicable strategy for integrating polyoxometalates into functional architectures and devices.
Assuntos
Butadienos/síntese química , Elastômeros/síntese química , Metacrilatos/síntese química , Nanocompostos/química , Nanocompostos/ultraestrutura , Nylons/síntese química , Ácidos Fosfóricos/síntese química , Butadienos/química , Técnicas de Química Sintética/métodos , Elastômeros/química , Metacrilatos/química , Modelos Moleculares , Molibdênio/química , Nylons/química , Ácidos Fosfóricos/química , Espalhamento a Baixo Ângulo , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
We present a novel, versatile, and simple solution-based routine to produce soft, nanosized Janus particles with tunable structural and physical properties at high volume yield. This process is based on the cross-linking of compartments within precisely defined multicompartment micelles (MCMs), which are themselves formed by the self-assembly of ABC triblock terpolymers. Therein, the C blocks form the stabilizing corona emanating from B compartments, which in turn reside on an A core. Cross-linking of the B compartments allows to permanently fixate the phase-separated state and dissolution in a good solvent for all blocks breaks up the MCMs into single Janus particles. They now consist of a core of cross-linked B blocks and two phase-separated hemispheres of A and C. The process gives access to unprecedented structural features such as tunable core diameter and control over the Janus balance ranging from dominant A side to equal hemispheres to dominant C side. We demonstrate that this simple one-pot approach can be extended to a range of triblock terpolymers with different block lengths and block chemistries to furnish a library of tailor-made Janus particles with widely tunable physical properties. Such a diversity and simplicity has remained unreachable with our previously developed approach using the controlled cross-linking of bulk morphologies. We show that this new synthetic route can be upscaled to a high volume yield of 10 wt %, thereby enabling large-scale applications. We further demonstrate the effect of the Janus balance on colloidal self-assembly. Janus particles with a dominant hydrophobic and a small hydrophilic patch aggregate into large clusters in water, but merely di- or trimerize in chloroform.
RESUMO
High-aspect-ratio rutile and anatase hybrid nanowires are produced via a template-directed process using a novel cylindrical polyelectrolyte brush template. Loading the highly negatively charged 1D templates with pre-synthesized TiO(2) nanocrystals, results in the fabrication of soluble crystalline TiO(2) hybrid nanowires.
RESUMO
Delivery of polynucleotides such as plasmid DNA (pDNA) and siRNA to nondividing and primary cells by nonviral vectors presents a considerable challenge. In this contribution, we introduce a novel type of PDMAEMA-based star-shaped nanoparticles that (i) are efficient transfection agents in clinically relevant and difficult-to-transfect human cells (Jurkat T cells, primary T lymphocytes) and (ii) can efficiently deliver siRNA to human primary T lymphocytes resulting to more than 40% silencing of the targeted gene. Transfection efficiencies achieved by the new vectors in serum-free medium are generally high and only slightly reduced in the presence of serum, while cytotoxicity and cell membrane disruptive potential at physiological pH are low. Therefore, these novel agents are expected to be promising carriers for nonviral gene transfer. Moreover, we propose a general design principle for the construction of polycationic nanoparticles capable of delivering nucleic acids to the above-mentioned cells.
Assuntos
Técnicas de Transferência de Genes , Vetores Genéticos , Plasmídeos/genética , RNA Interferente Pequeno/genética , Linfócitos T/citologia , Animais , Antígenos CD4/análise , Antígenos CD4/genética , Células CHO , Diferenciação Celular , Células Cultivadas , Cricetinae , Expressão Gênica , Células HEK293 , Humanos , Células Jurkat , Camundongos , Nanopartículas , Ácidos Nucleicos/química , Polimerização , Interferência de RNA , TransfecçãoRESUMO
We present the synthesis of dual-responsive (pH and temperature) magnetic core-shell nanoparticles utilizing the grafting-from approach. First, oleic acid stabilized superparamagnetic maghemite (γ-Fe(2)O(3)) nanoparticles (NPs), prepared by thermal decomposition of iron pentacarbonyl, were surface-functionalized with ATRP initiating sites bearing a dopamine anchor group via ligand exchange. Subsequently, 2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized from the surface by ATRP, yielding dual-responsive magnetic core-shell NPs (γ-Fe(2)O(3)@PDMAEMA). The attachment of the dopamine anchor group on the nanoparticle's surface is shown to be reversible to a certain extent, resulting in a grafting density of 0.15 chains per nm(2) after purification. Nevertheless, the grafted NPs show excellent long-term stability in water over a wide pH range and exhibit a pH- and temperature-dependent reversible agglomeration, as revealed by turbidimetry. The efficiency of γ-Fe(2)O(3)@PDMAEMA hybrid nanoparticles as a potential transfection agent was explored under standard conditions in CHO-K1 cells. Remarkably, γ-Fe(2)O(3)@PDMAEMA led to a 2-fold increase in the transfection efficiency without increasing the cytotoxicity, as compared to polyethyleneimine (PEI), and yielded on average more than 50% transfected cells. Moreover, after transfection with the hybrid nanoparticles, the cells acquired magnetic properties that could be used for selective isolation of transfected cells.
Assuntos
Proliferação de Células , Compostos Férricos/química , Técnicas de Transferência de Genes , Magnetismo , Metacrilatos/química , Nanopartículas/química , Nylons/química , Polímeros/química , Animais , Células CHO , Separação Celular , Cricetinae , Dopamina/administração & dosagem , Dopaminérgicos/administração & dosagem , Concentração de Íons de Hidrogênio , Nucleosídeos , Tamanho da Partícula , Polietilenoimina/química , Pirazóis , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Temperatura , TransfecçãoRESUMO
One-dimensional (1D) magnetic inorganic-organic hybrid nanomaterials bear both the intrinsic magnetic properties of the inorganic components and the functionality and responsiveness of their organic part. In this tutorial review, we first emphasize various synthetic strategies for this type of materials: (i) template-directed synthesis employs different preformed templates such as channels in solids, mesostructures self-assembled from block copolymers, cylindrical polymer brushes, 1D biological templates and other existing 1D templates; (ii) electrospinning, which provides a simple and efficient technique that can lead to a potential large-scale production; (iii) 1D conjugation of building blocks which combines the physical attraction of magnetic nanoparticles in a magnetic field with chemical crosslinking and stabilization. The properties, functions and the future trends of these materials are also briefly introduced. It is foreseeable that these hybrid materials will play more and more important roles in the ever-advancing miniaturization of functional devices.
RESUMO
This paper reports on the highly ordered and tunable inner structure of poly(ionic liquid) nanoparticles, which formed spontaneously by precipitation polymerization from water. Without added stabilizer, these "latexes" are much smaller (20-40 nm in diameter) than usual polymer latexes and exhibit either multilamellar or unilamellar vesicular morphology, depending on the tail length of the quaternizing alkyl chains. The simplicity in the synthesis and composition and the high complexity of the ordered structures that resemble liposomes expand the classical profile of homopolymer self-assembly. In addition, unidirectional superassembly to a nanoworm mesostructure is found at elevated concentrations, indicating that the ionic liquid liposomes are apt to integrate into further hierarchical assembly schemes.