RESUMO
The interaction mechanism between trypsin and fulvic acid was analyzed by multispectral method and molecular docking simulation. The fluorescence spectra showed that fulvic acid induced static quenching of trypsin. The validity of this conclusion was further substantiated through the computation of the binding constants. The thermodynamic parameters show that the reaction is mainly controlled by van der Waals force and hydrogen bond force, and the reaction is spontaneous. In addition, based on the obtained binding distance, there may be a non-radiative energy transfer between the two. The ultraviolet spectrum showed that fulvic acid could shift the absorption peak of trypsin, indicating that fulvic acid had an effect on the secondary structure of trypsin. According to the synchronous fluorescence spectrum results, fulvic acid primarily interacts with tryptophan residues in trypsin and induces alterations in their microenvironment. Three-dimensional fluorescence spectrum and circular dichroism further proves this conclusion. The molecular docking simulation reveals that the interaction between the two groups primarily arises from hydrogen bonding and van der Waals forces. The findings suggest that FA has the ability to induce conformational changes in trypsin's secondary structure.
Assuntos
Benzopiranos , Simulação de Acoplamento Molecular , Tripsina/química , Tripsina/metabolismo , Ligação Proteica , Dicroísmo Circular , Termodinâmica , Espectrometria de Fluorescência , Sítios de Ligação , Ligação de HidrogênioRESUMO
The interaction between chloramphenicol (CHL) and pepsin (PEP), as well as the impact of CHL on PEP conformation, were investigated using spectroscopic techniques and molecular docking simulations in this study. The experimental results demonstrate that CHL exhibits a static quenching effect on PEP. The thermodynamic parameters indicate that the reaction between CHL and PEP is spontaneous, primarily driven by hydrogen bonding and van der Waals forces. Moreover, the binding distance of r<7â nm suggests the occurrence of Förster's non-radiative energy transfer between these two molecules. In the synchronous fluorescence spectrum, the maximum fluorescence intensity of PEP produced a redshift phenomenon, indicating that CHL was bound to tryptophan residues of PEP. The addition of CHL induces changes in the secondary structure of PEP, as confirmed by the observed alterations in peak values in three-dimensional fluorescence spectra. The UV spectra reveal a redshift of 3â nm in the maximum absorption peak, indicating a conformational change in the secondary structure of PEP upon addition of CHL. Circular dichroism analysis demonstrates significant alterations in the α-helix, ß-sheet, ß-turn, and random coil contents of PEP before and after CHL incorporation, further confirming its ability to modulate the secondary structure of PEP.
Assuntos
Antibacterianos , Cloranfenicol , Antibacterianos/farmacologia , Cloranfenicol/farmacologia , Espectrometria de Fluorescência , Pepsina A/química , Pepsina A/metabolismo , Simulação de Acoplamento Molecular , Termodinâmica , Dicroísmo Circular , Sítios de Ligação , Ligação ProteicaRESUMO
Humic acid is a type of polymeric, organic weak acid mixture with a core aromatic structure and main-component oxygen-containing functional group. Fulvic acid is a type of humic substance that can be dissolved in acid, alkali, or water. This study discusses the influence of different peptides on the molecular structure of fulvic acid, which was extracted from herbaceous, woody, and mossy peats using alkaline dissolution and acid precipitation methods. Analyses using infrared, UV-Vis, 13C-NMR, and X-ray photoelectron spectroscopies, as well as X-ray diffraction (XRD), were conducted to compare the effects of different peat types on the content and molecular structure of fulvic acid. The woody peat fulvic acid content was the highest among all peat fulvic acids (0.38%). However, the yield of fulvic acid from herbaceous peat was the highest (2.53%). Herbaceous peat fulvic acid contains significant quantities of carbonyl, amino, methylene, carboxyl, and phenolic hydroxyl groups and ether bonds. Woody peat fulvic acid contains carbonyl and methoxy groups, benzenes, aromatic carbons, aromatic ethers, and phenols. The degree of aromatization of woody peat fulvic acid was the highest. Mossy peat fulvic acid contains high levels of hydroxy, methyl, methylene, and phenol groups and aromatic ethers. The structural differences in fulvic acids in the different types of peat were primarily manifested in the content of functional groups, with little influence from the types of functional groups. XRD analysis of the different peats revealed that their structures all comprised benzene rings. However, mossy peat contained more C=O and -COOH groups, whereas herbaceous peat contained more C-O groups.
RESUMO
Heavy metal pollution caused by industrial wastewater such as mining and metallurgical wastewater is a major global concern. Therefore, this study used modified lignite as a low-cost adsorbent for heavy metal ions. Pingzhuang lignite was dissolved and modified using Fusarium lignite B3 to prepare a biotransformed-lignite adsorbent (BLA). The O, H, and N contents of the BLA increased after transformation, and the specific surface area increased from 1.81 to 5.66 m2·g-1. Various adsorption properties were investigated using an aqueous solution of Cu(â ¡). The kinetic and isothermal data were well-fitted by pseudo-second-order and Langmuir models, respectively. The Langmuir model showed that the theoretical Cu(II) adsorption capacity was 71.47 mg·g-1. Moreover, large particles and a neutral pH were favorable for the adsorption of heavy metal ions. The adsorption capacities of raw lignite and BLA were compared for various ions. Microbial transformation greatly improved the adsorption capacity, and the BLA had good adsorption and passivation effects with Cu(II), Mn(II), Cd(II), and Hg(II). Investigation of the structural properties showed that the porosity and specific surface area increased after biotransformation, and there were more active groups such as -COOH, Ar-OH, and R-OH, which were involved in the adsorption performance.
Assuntos
Mercúrio , Metais Pesados , Poluentes Químicos da Água , Carvão Mineral , Águas Residuárias , Metais Pesados/análise , Água , Íons , Adsorção , Cinética , Poluentes Químicos da Água/química , Concentração de Íons de HidrogênioRESUMO
In the current study, the interaction of minocycline hydrochloride (MC) and trypsin (TRP) was studied using fluorescence spectroscopy, synchronous fluorescence spectroscopy, three-dimensional fluorescence spectroscopy, UV-Vis spectroscopy, and molecular docking simulation techniques. The results show that the fluorescence quenching of trypsin at different degrees can be caused by minocycline hydrochloride at different temperatures. According to the Stern-Volmer equation, the fluorescence quenching type was static quenching. By calculating critical distance, we concluded that there is a possibility of non-radiative energy transfer between minocycline hydrochloride and trypsin. The effect of minocycline hydrochloride on the secondary structure of trypsin was demonstrated using ultraviolet spectroscopy. Synchronous fluorescence spectroscopy showed that minocycline hydrochloride could bind to tryptophan residues in trypsin, resulting in corresponding changes in the secondary structure of trypsin. Three-dimensional fluorescence spectroscopy showed that minocycline hydrochloride had a particular effect on the microenvironment of trypsin that led to changes in the secondary structure of trypsin. The molecular docking technique demonstrated that the binding of minocycline hydrochloride and trypsin was stable. Circular dichroism showed that the secondary structure of trypsin could be changed by minocycline hydrochloride.
Assuntos
Minociclina , Simulação de Acoplamento Molecular , Tripsina/química , Ligação Proteica , Espectrofotometria Ultravioleta , Termodinâmica , Dicroísmo Circular , Espectrometria de Fluorescência , Sítios de LigaçãoRESUMO
Drying operation is beneficial to the preservation and transportation of microbial ecological agents. In this study, drying kinetics and water distribution variations in solid biomass medium during hot air drying (HAD) and vacuum freeze drying (VFD) were systematically investigated. Meanwhile, the effects of different drying strategies on the sporulation of Bacillus subtilis and the titer of microbial ecological agents were compared. The results showed that both HAD and VFD induced rapid water removal from the solid biomass medium. VFD retained bound water and maintained the porous structure of the solid medium. Both HAD and VFD induced sporulation. The expression level of sporulation-regulatory genes spo0A, sigF, and sigE followed the order 80°C-HAD > 60°C-HAD > VFD. The spore number in the medium after 80°C-HAD drying for 6 h was 0.72 × 1010/g dry medium, which was 9.1 and 12.5% larger than that of the medium with 60°C-HAD and VFD, respectively. Therefore, 80°C-HAD is an effective drying strategy for promoting sporulation, which improves the titer of microbial ecological agents with B. subtilis.
RESUMO
Currently, biomethane obtained from coal resources, such as lignite and peat, serves as a sustainable biofuel urgently needed by the energy economy. To improve biomethane yield from lignite, the effects of different concentrations of benzyl alcohol, a degraded product of humic acid, on a biomethanation fermentation system were analyzed. The total biomethane yield, daily biomethane yield, coenzyme F420, VFA (volatile fatty acids) concentration, alkalinity, and pH were used to determine the optimal benzyl alcohol concentration. The biomethanation fermentation system with 2000 mg/L benzyl alcohol produced up to 4.03 mL/g of biomethane, which was 1.15 times that produced from the control group. The coenzyme F420, VFA, alkalinity, and pH of the system after adding 2000 mg/L benzyl alcohol were more preferable after adding other concentrations during the lignite biomethanation process. In summary, 2000 mg/L benzyl alcohol had a significantly positive effect on the lignite biomethanation fermentation system. When benzyl alcohol is added to the fermentation system, it accelerates the tricarboxylic acid cycle, which in turn produces more biomethane. Additionally, the self-supply of lignite microbial transformation nutrients from the perspective of chemical composition was explored as a novel approach in solving the common problem of low biomethane yield from a single lignite raw material. This also laid a foundation for subsequent steps through the adjustment of pretreatment conditions to ensure that the lignite pretreatment liquid contained increased benzyl alcohol, and a greater yield of biomethane can be produced after activated sludge addition.
RESUMO
Aerogels are nanoporous materials with excellent properties, especially super thermal insulation. However, owing to their serious high brittleness, the macroscopic forms of aerogels are not sufficiently rich for the application in some fields, such as thermal insulation clothing fabric. Recently, freeze spinning and wet spinning have been attempted for the synthesis of aerogel fibers. In this study, robust fibrous silica-bacterial cellulose (BC) composite aerogels with high performance were synthesized in a novel way. Silica sol was diffused into a fiber-like matrix, which was obtained by cutting the BC hydrogel and followed by secondary shaping to form a composite wet gel fiber with a nanoscale interpenetrating network structure. The tensile strength of the resulting aerogel fibers reached up to 5.4 MPa because the quantity of BC nanofibers in the unit volume of the matrix was improved significantly by the secondary shaping process. In addition, the composite aerogel fibers had a high specific area (up to 606.9 m2/g), low density (less than 0.164 g/cm3), and outstanding hydrophobicity. Most notably, they exhibited excellent thermal insulation performance in high-temperature (210 °C) or low-temperature (-72 °C) environments. Moreover, the thermal stability of CAFs (decomposition temperature was about 330 °C) was higher than that of natural polymer fiber. A novel method was proposed herein to prepare aerogel fibers with excellent performance to meet the requirements of wearable applications.
RESUMO
Silica aerogels can be strengthened by forming a nanoscale interpenetrating network (IPN) comprising a silica gel skeleton and a cellulose nanofiber network. Previous studies have demonstrated the effectiveness of this method for improving the mechanical properties and drying of aerogels. However, the preparation process is generally tedious and time-consuming. This study aims to streamline the preparation process of these composite aerogels. Silica alcosols were directly diffused into cellulose wet gels with loose, web-like microstructures, and an IPN structure was gradually formed by regulating the gelation rate. Supercritical CO2 drying followed to obtain composite aerogels. The mechanical properties were further enhanced by a simple secondary regulation process that increased the quantity of bacterial cellulose (BC) nanofibers per unit volume of the matrix. This led to the production of aerogels with excellent bendability and a high tensile strength. A maximum breaking stress and tensile modulus of 3.06 MPa and 46.07 MPa, respectively, were achieved. This method can be implemented to produce robust and bendable silica-based composite aerogels (CAs).
RESUMO
Levulinic acid production, directly from lignocellulosic biomass, resulted in low yields due to the poor substrate accessibility and occurrence of side reactions. The effects of reaction conditions, enzymatic pretreatment, and inhibitor addition on the conversion of steam-exploded rice straw (SERS) short fiber to levulinic acid catalyzed by solid superacid were investigated systematically. The results indicated that the optimal reaction conditions were temperature, time, and solid superacid concentration combinations of 200 °C, 15 min, and 7.5 %. Enzymatic pretreatment improved the substrate accessibility to solid superacid catalyst, and p-hydroxyanisole inhibitor reduced the side reactions during reaction processes, which helped to increase levulinic acid yield. The levulinic acid yield reached 25.2 % under the optimal conditions, which was 61.5 % higher than that without enzymatic pretreatment and inhibitor addition. Therefore, enzymatic pretreatment coupled with the addition of p-hydroxyanisole increased levulinic acid production effectively, which contributed to the value-added utilization of lignocellulosic biomass.
Assuntos
Anisóis/farmacologia , Celulase/metabolismo , Ácidos Levulínicos/metabolismo , Oryza/química , Vapor , Resíduos , Biocatálise/efeitos dos fármacos , Biomassa , Lignina/metabolismo , Oryza/efeitos dos fármacos , Temperatura , Fatores de TempoRESUMO
OBJECTIVE: To analyze the genetic polymorphism of 5 short tandem repeat(STR) loci in Hui population in Ningxia area. METHODS: The genetic polymorphisms of five selected STR loci(D11S1984, D14S306, D14S617, D17S1290 and D19S433) in chromosomes 11, 14, 17 and 19 in 144 unrelated individuals in Hui population in Ningxia area were analyzed by PCR amplification, denaturing polyacrylamide gel electrophoresis(PAGE) and silver staining. RESULTS: 10, 8, 11, 13 and 8 alleles, 30, 25, 33, 40 and 23 genotypes of the 5 STR loci in Hui population in Ningxia were detected. The measured values of the heterozygosity of the 5 STR loci were 0.8413, 0.8033, 0.8331, 0.8369 and 0.7703; of the polymorphism information content were 0.8217, 0.7746, 0.8121, 0.8174 and 0.7332; of the discrimination power (DP) were 0.9516, 0.9257, 0.9611, 0.9660 and 0.9135. The calculated discrimination power was 0.9999995. The measured values of paternity exclusion were 0.7046, 0.6367, 0.6911, 0.7012 and 0.5801; the calculated paternity exclusion was 0.9958. The genotype distributions were in accordance with Hardy-Weinberg equilibrium. CONCLUSION: The 5 STR loci have better polymorphism in Hui population in the Ningxia area, and thus could serve as useful markers for population genetics research and for individual identification and paternity test in forensic medicine.