Engineering Cell Adhesion and Orientation via Ultrafast Laser Fabricated Microstructured Substrates.

Cell responses depend on the stimuli received by the surrounding extracellular environment, which provides the cues required for adhesion, orientation, proliferation, and differentiation at the micro and the nano scales. In this study, discontinuous microcones on silicon (Si) and continuous microgrooves on polyethylene terephthalate (PET) substrates were fabricated via ultrashort pulsed laser irradiation at various fluences, resulting in microstructures with different magnitudes of roughness and varying geometrical characteristics. The topographical models attained were specifically developed to imitate the guidance and alignment of Schwann cells for the oriented axonal regrowth that occurs in nerve regeneration. At the same time, positive replicas of the silicon microstructures were successfully reproduced via soft lithography on the biodegradable polymer poly(lactide-co-glycolide) (PLGA). The anisotropic continuous (PET) and discontinuous (PLGA replicas) microstructured polymeric substrates were assessed in terms of their influence on Schwann cell responses. It is shown that the micropatterned substrates enable control over cellular adhesion, proliferation, and orientation, and are thus useful to engineer cell alignment in vitro. This property is potentially useful in the fields of neural tissue engineering and for dynamic microenvironment systems that simulate in vivo conditions.

Sub-ps Pulsed Laser Deposition of Boron Films for Neutron Detector Applications.

In view of the demand for high-quality thermal neutron detectors, boron films have recently attracted widespread research interest because of their special properties. In this work, we report on the deposition of boron films on silicon substrates by sub-picosecond pulsed laser deposition (PLD) at room temperature. Particular emphasis was placed on the investigation of the effect of the laser energy density (fluence) on the ablation process of the target material, as well as on the morphological properties of the resulting films. In addition, based on the study of the ablation and deposition rates as a function of the fluence, the ablation/deposition mechanisms are discussed. We show that well-adherent and stable boron films, with good quality surfaces revealing a good surface flatness and absence of cracks, can be obtained by means of the PLD technique, which proves to be a reliable and reproducible method for the fabrication of thick boron coatings that are suitable for neutron detection technology.

Residual Right-to-Left-Shunt Following Transcatheter Patent Foramen Ovale Closure: The Role of Antithrombotic Treatment.

BACKGROUND: Transcatheter closure of patent foramen ovale (PFO) is a highly effective therapy for patients with left circulation thromboembolism, not attributable to other conditions. OBJECTIVES: This retrospective cohort study investigates the impact of baseline foramen ovale anatomy on the severity of the postclosure shunt. METHODS: Patients with PFO, who underwent percutaneous closure, were followed up for at least 5 years postimplantation. Patients were classified into two groups based on the presence of high-risk features of the baseline PFO anatomy. At the follow-up follow-up, residual right-to-left shunt was assessed for the high and non-highrisk anatomy groups, via transcranial Doppler at rest and after performing the Valsalva maneuver, with the injection of agitated saline. RESULTS: 38 patients were examined after a mean follow-up period of 9 ± 3 years after implantation. After retrospective evaluation of the baseline transthoracic and transesophageal echo studies, 14 patients with high-risk PFO anatomy were identified. The degree of the residual right-to-left shunt, as assessed by the number of microbubbles was higher in the high-risk PFO anatomy group compared to the non-high-risk group, both at rest [1.50 (IQR: 0.00-3.25) vs. 0.00 (IQR: 0.00-0.00), p < 0.001] and post-Valsalva maneuver [7.50 (IQR: 1.50- 10.25) vs. 0.00 (IQR: 0.00-3.75), p = 0.003]. Furthermore, in the high-risk group, more microbubbles were detected at rest (p = 0.008) and post-Valsalva (p = 0.002) in subjects without antiplatelet treatment compared to subjects on prolonged antiplatelet therapy. CONCLUSION: Baseline PFO anatomy affects the severity of the residual right-to-left shunt. Prolonged antiplatelet therapy may benefit patients with high-risk anatomical features.

Obtaining Nanostructured ZnO onto Si Coatings for Optoelectronic Applications via Eco-Friendly Chemical Preparation Routes.

Although the research on zinc oxide (ZnO) has a very long history and its applications are almost countless as the publications on this subject are extensive, this semiconductor is still full of resources and continues to offer very interesting results worth publishing or warrants further investigation. The recent years are marked by the development of novel green chemical synthesis routes for semiconductor fabrication in order to reduce the environmental impacts associated with synthesis on one hand and to inhibit/suppress the toxicity and hazards at the end of their lifecycle on the other hand. In this context, this study focused on the development of various kinds of nanostructured ZnO onto Si substrates via chemical route synthesis using both classic solvents and some usual non-toxic beverages to substitute the expensive high purity reagents acquired from specialized providers. To our knowledge, this represents the first systematic study involving common beverages as reagents in order to obtain ZnO coatings onto Si for optoelectronic applications by the Aqueous Chemical Growth (ACG) technique. Moreover, the present study offers comparative information on obtaining nanostructured ZnO coatings with a large variety of bulk and surface morphologies consisting of crystalline nanostructures. It was revealed from X-ray diffraction analysis via Williamson-Hall plots that the resulting wurtzite ZnO has a large crystallite size and small lattice strain. These morphological features resulted in good optical properties, as proved by photoluminescence (PL) measurements even at room temperature (295 K). Good optical properties could be ascribed to complex surface structuring and large surface-to-volume ratios.

Biomimetic surface structuring using cylindrical vector femtosecond laser beams.

We report on a new, single-step and scalable method to fabricate highly ordered, multi-directional and complex surface structures that mimic the unique morphological features of certain species found in nature. Biomimetic surface structuring was realized by exploiting the unique and versatile angular profile and the electric field symmetry of cylindrical vector (CV) femtosecond (fs) laser beams. It is shown that, highly controllable, periodic structures exhibiting sizes at nano-, micro- and dual- micro/nano scales can be directly written on Ni upon line and large area scanning with radial and azimuthal polarization beams. Depending on the irradiation conditions, new complex multi-directional nanostructures, inspired by the Shark's skin morphology, as well as superhydrophobic dual-scale structures mimicking the Lotus' leaf water repellent properties can be attained. It is concluded that the versatility and features variations of structures formed is by far superior to those obtained via laser processing with linearly polarized beams. More important, by exploiting the capabilities offered by fs CV fields, the present technique can be further extended to fabricate even more complex and unconventional structures. We believe that our approach provides a new concept in laser materials processing, which can be further exploited for expanding the breadth and novelty of applications.

Comparative study of stromal bed of LASIK flaps created with femtosecond lasers (IntraLase FS150, WaveLight FS200) and mechanical microkeratome.

BACKGROUND/AIM: To compare stromal bed smoothness in LASIK flaps created with two different femtosecond lasers (IntraLase FS150 and WaveLight FS200) and a mechanical microkeratome (MMK) (Carriazo-Pendular microkeratome). METHODS: Sixty freshly enucleated porcine eyes were used for the study. Twenty flaps were created and constitute each of the following three groups: IntraLase FS150 (IFS group), WaveLight FS200 (WFS group) and MMK (MMK group). In each of the three groups, 10 flaps were created with intended thickness of 110 µm and another 10 flaps with 130 µm. Images were assessed with light microscopy and scanning electron microscopy. Qualitative surface roughness grading of the images was performed by five masked observers and statistical comparisons of scores were made between groups. RESULTS: The results of qualitative surface roughness grading demonstrated that there was no significant difference between the two femtosecond (FS) lasers when comparing the subgroups with the same flap thickness (p>0.05 in both comparisons, Mann-Whitney U test). In addition, there was no statistically significant difference (p>0.05) in each flap maker group between different thickness subgroups. However, the scores of the FS laser subgroups were significantly better than the scores of the MMK subgroups with corresponding flap thicknesses (p<0.05, Mann-Whitney U test). CONCLUSIONS: Our study demonstrates that the IntraLase FS150 and the WaveLight FS200 had a similar performance and provided flaps with smooth surfaces. In comparison to the MMK, the studied femtosecond laser systems had a superior performance in terms of smoothness.

Analytical study of the chemical and physical changes induced by KrF laser cleaning of tempera paints.

The cleaning of paintings using UV lasers is a growing field of interest in the practice of conservation. In this work, we have studied the chemical and physical changes induced by KrF excimer laser at 248 nm of tempera paint dosimeter systems. The changes have been evaluated by using a range of analytical techniques. These include profilometry; colorimetry; optical and vibrational spectroscopies, such as laser-induced fluorescence (LIF), laser-induced breakdown spectroscopy (LIBS), Fourier transform Raman (FTR), and infrared (FT-IR); and analytical mass spectrometric techniques, such as direct-temperature-resolved mass spectrometry (DTMS) and matrix-assisted laser desorption and ionization mass spectrometry (MALDI-MS). Integration of the results obtained by these techniques allowed the investigation of the nature and degree of change of the irradiated paint systems. Direct laser irradiation induces various degrees of discoloration that depend strongly on the nature of the pigment. This effect takes place mainly on the surface layer of the sample. Degradation of the binding medium occurs in the presence of inorganic pigments, and in some cases, evidence of alterations in the molecular composition of the pigment has been obtained. Varnished systems do not display this discoloration when a thin protective layer is left on the paint. A laser cleaning strategy for varnished paintings should be based on the partial removal of the varnish, leaving a residual layer that shields the underlying pigments from direct laser exposure.