Controlling the helicity of light by electrical magnetization switching.

Controlling the intensity of emitted light and charge current is the basis of transferring and processing information1. By contrast, robust information storage and magnetic random-access memories are implemented using the spin of the carrier and the associated magnetization in ferromagnets2. The missing link between the respective disciplines of photonics, electronics and spintronics is to modulate the circular polarization of the emitted light, rather than its intensity, by electrically controlled magnetization. Here we demonstrate that this missing link is established at room temperature and zero applied magnetic field in light-emitting diodes2-7, through the transfer of angular momentum between photons, electrons and ferromagnets. With spin-orbit torque8-11, a charge current generates also a spin current to electrically switch the magnetization. This switching determines the spin orientation of injected carriers into semiconductors, in which the transfer of angular momentum from the electron spin to photon controls the circular polarization of the emitted light2. The spin-photon conversion with the nonvolatile control of magnetization opens paths to seamlessly integrate information transfer, processing and storage. Our results provide substantial advances towards electrically controlled ultrafast modulation of circular polarization and spin injection with magnetization dynamics for the next-generation information and communication technology12, including space-light data transfer. The same operating principle in scaled-down structures or using two-dimensional materials will enable transformative opportunities for quantum information processing with spin-controlled single-photon sources, as well as for implementing spin-dependent time-resolved spectroscopies.

Capacitively and Inductively Coupled Excitons in Bilayer MoS_{2}.

The coupling of intralayer A and B excitons and interlayer excitons (IE) is studied in a two-dimensional semiconductor, homobilayer MoS_{2}. It is shown that the measured optical susceptibility reveals both the magnitude and the phase of the coupling constants. The IE and B excitons couple via a 0-phase (capacitive) coupling; the IE and A excitons couple via a π-phase (inductive) coupling. The IE-B and IE-A coupling mechanisms are interpreted as hole tunneling and electron-hole exchange, respectively. The couplings imply that even in a monolayer, the A and B excitons have mixed spin states. Using the IE as a sensor, the A-B intravalley exchange coupling is determined. Finally, we realize a bright and highly tunable lowest-energy momentum-direct exciton at high electric fields.

Monolayer Boron Nitride: Hyperspectral Imaging in the Deep Ultraviolet.

The optical response of 2D materials and their heterostructures is the subject of intense research with advanced investigation of the luminescence properties in devices made of exfoliated flakes of few- down to one-monolayer thickness. Despite its prevalence in 2D materials research, hexagonal boron nitride (hBN) remains unexplored in this ultimate regime because of its ultrawide bandgap of about 6 eV and the technical difficulties related to performing microscopy in the deep-ultraviolet domain. Here, we report hyperspectral imaging at wavelengths around 200 nm in exfoliated hBN at low temperature. In monolayer boron nitride, we observe direct-gap emission around 6.1 eV. In marked contrast to transition metal dichalcogenides, the photoluminescence signal is intense in few-layer hBN, a result of the near unity radiative efficiency in indirect-gap multilayer hBN.

Phonon-Assisted Photoluminescence from Indirect Excitons in Monolayers of Transition-Metal Dichalcogenides.

The photoluminescence (PL) spectrum of transition-metal dichalcogenides (TMDs) shows a multitude of emission peaks below the bright exciton line, and not all of them have been explained yet. Here, we study the emission traces of phonon-assisted recombinations of indirect excitons. To this end, we develop a microscopic theory describing simultaneous exciton, phonon, and photon interaction and including consistent many-particle dephasing. We explain the drastically different PL below the bright exciton in tungsten- and molybdenum-based materials as the result of different configurations of bright and momentum-dark states. In good agreement with experiments, our calculations predict that WSe2 exhibits clearly visible low-temperature PL signals stemming from the phonon-assisted recombination of momentum-dark K-K' excitons.

Electroluminescence from HgTe Nanocrystals and Its Use for Active Imaging.

Mercury telluride (HgTe) nanocrystals are among the most versatile infrared (IR) materials with the absorption of lowest energy optical absorption which can be tuned from the visible to the terahertz range. Therefore, they have been extensively considered as near IR emitters and as absorbers for low-cost IR detectors. However, the electroluminescence of HgTe remains poorly investigated despite its ability to go toward longer wavelengths compared to traditional lead sulfide (PbS). Here, we demonstrate a light-emitting diode (LED) based on an indium tin oxide (ITO)/zinc oxide (ZnO)/ZnO-HgTe/PbS/gold-stacked structure, where the emitting layer consists of a ZnO/HgTe bulk heterojunction which drives the charge balance in the system. This LED has low turn-on voltage, long lifetime, and high brightness. Finally, we conduct short wavelength infrared (SWIR) active imaging, where illumination is obtained from a HgTe NC-based LED, and demonstrate moisture detection.

Optomechanical Measurement of Thermal Transport in Two-Dimensional MoSe2 Lattices.

Nanomechanical resonators have emerged as sensors with exceptional sensitivities. These sensing capabilities open new possibilities in the studies of the thermodynamic properties in condensed matter. Here, we use mechanical sensing as a novel approach to measure the thermal properties of low-dimensional materials. We measure the temperature dependence of both the thermal conductivity and the specific heat capacity of a transition metal dichalcogenide monolayer down to cryogenic temperature, something that has not been achieved thus far with a single nanoscale object. These measurements show how heat is transported by phonons in two-dimensional systems. Both the thermal conductivity and the specific heat capacity measurements are consistent with predictions based on first-principles.

Electrical Initialization of Electron and Nuclear Spins in a Single Quantum Dot at Zero Magnetic Field.

The emission of circularly polarized light from a single quantum dot relies on the injection of carriers with well-defined spin polarization. Here we demonstrate single dot electroluminescence (EL) with a circular polarization degree up to 35% at zero applied magnetic field. The injection of spin-polarized electrons is achieved by combining ultrathin CoFeB electrodes on top of a spin-LED device with p-type InGaAs quantum dots in the active region. We measure an Overhauser shift of several microelectronvolts at zero magnetic field for the positively charged exciton (trion X+) EL emission, which changes sign as we reverse the injected electron spin orientation. This is a signature of dynamic polarization of the nuclear spins in the quantum dot induced by the hyperfine interaction with the electrically injected electron spin. This study paves the way for electrical control of nuclear spin polarization in a single quantum dot without any external magnetic field.

Chemical insights into the formation of Cu2ZnSnS4 films from all-aqueous dispersions for low-cost solar cells.

Cu2ZnSnS4 (CZTS) shows great potential for photovoltaic application because of its non-toxic earth-abundant components and good optoelectronic properties. Combining low-cost and environmentally friendly routes would be the most favorable approach for the development of CZTS solar cells. In this context, development of Cu2ZnSnS4 (CZTS) films from all-aqueous CZTS nanocrystals inks represents an interesting challenge. Here, we have highlighted a condensation regulation by the alkali ion size observed in the alkali series Li+ < Na+ < K+ < Rb+ < Cs+, and demonstrated the chemical stability of Cu2ZnSnS4 surfaces in basic aqueous dispersions. Data such as optimal nanocrystal size, critical cracking thickness and average thickness to fabricate micron crack-free films from all-aqueous chalcogenide nanocrystals dispersions were determined. From these results, a proof of concept for the formation of a crack-free film of 2.2 µm formed from an all-aqueous CZTS nanocrystals ink is given. When employing low-cost materials, removal of carbon impurities represents another important challenge. With the objective to fabricate residue-free films, a specific annealing strategy is proposed involving a high temperature purification step under Se partial pressure. Carbon removal is thus achieved via the CSe2 gas formation, simultaneously to the amorphous domains crystallization as demonstrated by Raman spectroscopy. These source data favoring the formation of residue-free, crack-free, annealed films should assist the large scale development of CZTS solar cells from low-cost and environmentally friendly, all -aqueous inks.

Domain Architectures and Grain Boundaries in Chemical Vapor Deposited Highly Anisotropic ReS2 Monolayer Films.

Recent studies have shown that vapor phase synthesis of structurally isotropic two-dimensional (2D) MoS2 and WS2 produces well-defined domains with clean grain boundaries (GBs). This is anticipated to be vastly different for 2D anisotropic materials like ReS2 mainly due to large anisotropy in interfacial energy imposed by its distorted 1T crystal structure and formation of signature Re-chains along [010] b-axis direction. Here, we provide first insight on domain architecture on chemical vapor deposited (CVD) ReS2 domains using high-resolution scanning transmission electron microscopy, angle-resolved nano-Raman spectroscopy, reflectivity, and atomic force microscopy measurements. Results provide ways to achieve crystalline anisotropy in CVD ReS2, establish domain architecture of high symmetry ReS2 flakes, and determine Re-chain orientation within subdomains. Results also provide a first atomic resolution look at ReS2 GBs, and surprisingly we find that cluster and vacancy defects, formed by collusion of Re-chains at the GBs, dramatically impact the crystal structure by changing the Re-chain direction and rotating Re-chains 180° along their b-axis. Overall results not only shed first light on domain architecture and structure of anisotropic 2D systems but also allow one to attain much desired crystalline anisotropy in CVD grown ReS2 for the first time for tangible applications in photonics and optoelectronics where direction-dependent dichroic and linearly polarized material properties are required.

Quantum interference between dark-excitons and zone-edged acoustic phonons in few-layer WS2.

Fano resonance which describes a quantum interference between continuum and discrete states, provides a unique method for studying strongly interacting physics. Here, we report a Fano resonance between dark excitons and zone-edged acoustic phonons in few-layer WS2 by using the resonant Raman technique. The discrete phonons with large momentum at the M-point of the Brillouin zone and the continuum dark exciton states related to the optically forbidden transition at K and Q valleys are coupled by the exciton-phonon interactions. We observe rich Fano resonance behaviors across layers and modes defined by an asymmetry-parameter q: including constructive interference with two mirrored asymmetry Fano peaks (weak coupling, q > 1 and q < - 1), and destructive interference with Fano dip (strong coupling, ∣q∣ < < 1). Our results provide new insight into the exciton-phonon quantum interference in two-dimensional semiconductors, where such interferences play a key role in their transport, optical, and thermodynamic properties.

Kapitza-resistance-like exciton dynamics in atomically flat MoSe2-WSe2 lateral heterojunction.

Being able to control the neutral excitonic flux is a mandatory step for the development of future room-temperature two-dimensional excitonic devices. Semiconducting Monolayer Transition Metal Dichalcogenides (TMD-ML) with extremely robust and mobile excitons are highly attractive in this regard. However, generating an efficient and controlled exciton transport over long distances is a very challenging task. Here we demonstrate that an atomically sharp TMD-ML lateral heterostructure (MoSe2-WSe2) transforms the isotropic exciton diffusion into a unidirectional excitonic flow through the junction. Using tip-enhanced photoluminescence spectroscopy (TEPL) and a modified exciton transfer model, we show a discontinuity of the exciton density distribution on each side of the interface. We introduce the concept of exciton Kapitza resistance, by analogy with the interfacial thermal resistance referred to as Kapitza resistance. By comparing different heterostructures with or without top hexagonal boron nitride (hBN) layer, we deduce that the transport properties can be controlled, over distances far greater than the junction width, by the exciton density through near-field engineering and/or laser power density. This work provides a new approach for controlling the neutral exciton flow, which is key toward the conception of excitonic devices.

Mitigation of Edge and Surface States Effects in Two-Dimensional WS2 for Photocatalytic H2 Generation.

Large scale development of the 2D transition metal di-chalcogenides (TMDC) relies on landmark improvement in performance, which could emerge from nanostructuration. Using p-WS2 nanoflakes with different degrees of exfoliation and fracturing, perspectives were provided to develop high-surface-area 2D p-WS2 films for the photocatalytic hydrogen generation. The critical role of inter-nanoflakes contacts within high-surface-area 2D films was demonstrated, highlighting the benefit of plane/plane versus edge/plane contacts. Evidence of the high density of surface states displayed by these 2D films was provided through electrochemical measurements. In addition to operating as recombination centers, the surface states were shown to give rise to deleterious Fermi-level pinning (FLP), which dramatically decreased the efficiency of charge carrier separation. Lastly, promising strategies yielding FLP suppression via surface states modification were proposed. In particular, use of a multifunctional ultrathin film displaying healing, catalytic, and n-type semiconduction properties was shown to greatly enhance charge carrier separation and transport to the photo-electrode/electrolyte interface. When the 2D photoelectrodes were fabricated with the above prerequisites (i. e., a high proportion of plane/plane contacts and a successful surface states chemical modification), a photocurrent up to 4.5 mA cm-2 was achieved for the first time on 2D p-WS2 photocathodes for hydrogen generation.

Chemical Vapor Deposition of High-Optical-Quality Large-Area Monolayer Janus Transition Metal Dichalcogenides.

One-pot chemical vapor deposition (CVD) growth of large-area Janus SeMoS monolayers is reported, with the asymmetric top (Se) and bottom (S) chalcogen atomic planes with respect to the central transition metal (Mo) atoms. The formation of these 2D semiconductor monolayers takes place upon the thermodynamic-equilibrium-driven exchange of the bottom Se atoms of the initially grown MoSe2 single crystals on gold foils with S atoms. The growth process is characterized by complementary experimental techniques including Raman and X-ray photoelectron spectroscopy, transmission electron microscopy, and the growth mechanisms are rationalized by first principle calculations. The remarkably high optical quality of the synthesized Janus monolayers is demonstrated by optical and magneto-optical measurements which reveal the strong exciton-phonon coupling and enable an exciton g-factor of -3.3.

Efficient phonon cascades in WSe2 monolayers.

Energy relaxation of photo-excited charge carriers is of significant fundamental interest and crucial for the performance of monolayer transition metal dichalcogenides in optoelectronics. The primary stages of carrier relaxation affect a plethora of subsequent physical mechanisms. Here we measure light scattering and emission in tungsten diselenide monolayers close to the laser excitation energy (down to ~0.6 meV). We reveal a series of periodic maxima in the hot photoluminescence intensity, stemming from energy states higher than the A-exciton state. We find a period ~15 meV for 7 peaks below (Stokes) and 5 peaks above (anti-Stokes) the laser excitation energy, with a strong temperature dependence. These are assigned to phonon cascades, whereby carriers undergo phonon-induced transitions between real states above the free-carrier gap with a probability of radiative recombination at each step. We infer that intermediate states in the conduction band at the Λ-valley of the Brillouin zone participate in the cascade process of tungsten diselenide monolayers. This provides a fundamental understanding of the first stages of carrier-phonon interaction, useful for optoelectronic applications of layered semiconductors.

Interlayer exciton mediated second harmonic generation in bilayer MoS2.

Second-harmonic generation (SHG) is a non-linear optical process, where two photons coherently combine into one photon of twice their energy. Efficient SHG occurs for crystals with broken inversion symmetry, such as transition metal dichalcogenide monolayers. Here we show tuning of non-linear optical processes in an inversion symmetric crystal. This tunability is based on the unique properties of bilayer MoS2, that shows strong optical oscillator strength for the intra- but also interlayer exciton resonances. As we tune the SHG signal onto these resonances by varying the laser energy, the SHG amplitude is enhanced by several orders of magnitude. In the resonant case the bilayer SHG signal reaches amplitudes comparable to the off-resonant signal from a monolayer. In applied electric fields the interlayer exciton energies can be tuned due to their in-built electric dipole via the Stark effect. As a result the interlayer exciton degeneracy is lifted and the bilayer SHG response is further enhanced by an additional two orders of magnitude, well reproduced by our model calculations. Since interlayer exciton transitions are highly tunable also by choosing twist angle and material combination our results open up new approaches for designing the SHG response of layered materials.

Large Perpendicular Magnetic Anisotropy in Ta/CoFeB/MgO on Full-Coverage Monolayer MoS2 and First-Principles Study of Its Electronic Structure.

A perpendicularly magnetized spin injector with a high Curie temperature is a prerequisite for developing spin optoelectronic devices on two-dimensional (2D) materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with large perpendicular magnetic anisotropy (PMA) on full-coverage monolayer (ML) molybdenum disulfide (MoS2). A large perpendicular interface anisotropy energy of 0.975 mJ/m2 has been obtained at the CoFeB/MgO interface, comparable to that observed in magnetic tunnel junction systems. It is found that the insertion of MgO between the ferromagnetic (FM) metal and the 2D material can effectively prevent the diffusion of the FM atoms into the 2D material. Moreover, the MoS2 ML favors a MgO(001) texture and plays a critical role in establishing the large PMA. First-principles calculations on a similar Fe/MgO/MoS2 structure reveal that the MgO thickness can modify the MoS2 band structure, from a direct band gap with 3ML-MgO to an indirect band gap with 7 ML-MgO. The proximity effect induced by Fe results in splitting of 10 meV in the valence band at the Γ point for the 3ML-MgO structure, while it is negligible for the 7 ML-MgO structure. These results pave the way to develop RT spin optoelectronic devices based on 2D transition-metal dichalcogenide materials.

Spin/valley pumping of resident electrons in WSe2 and WS2 monolayers.

Monolayers of transition metal dichalcogenides are ideal materials to control both spin and valley degrees of freedom either electrically or optically. Nevertheless, optical excitation mostly generates excitons species with inherently short lifetime and spin/valley relaxation time. Here we demonstrate a very efficient spin/valley optical pumping of resident electrons in n-doped WSe2 and WS2 monolayers. We observe that, using a continuous wave laser and appropriate doping and excitation densities, negative trion doublet lines exhibit circular polarization of opposite sign and the photoluminescence intensity of the triplet trion is more than four times larger with circular excitation than with linear excitation. We interpret our results as a consequence of a large dynamic polarization of resident electrons using circular light.

Filtering the photoluminescence spectra of atomically thin semiconductors with graphene.

Atomically thin semiconductors made from transition metal dichalcogenides (TMDs) are model systems for investigations of strong light-matter interactions and applications in nanophotonics, optoelectronics and valleytronics. However, the photoluminescence spectra of TMD monolayers display a large number of features that are particularly challenging to decipher. On a practical level, monochromatic TMD-based emitters would be beneficial for low-dimensional devices, but this challenge is yet to be resolved. Here, we show that graphene, directly stacked onto TMD monolayers, enables single and narrow-line photoluminescence arising solely from TMD neutral excitons. This filtering effect stems from complete neutralization of the TMD by graphene, combined with selective non-radiative transfer of long-lived excitonic species to graphene. Our approach is applied to four tungsten- and molybdenum-based TMDs and establishes TMD/graphene heterostructures as a unique set of optoelectronic building blocks that are suitable for electroluminescent systems emitting visible and near-infrared photons at near THz rate with linewidths approaching the homogeneous limit.