C≡N stretching vibration of 5-cyanotryptophan as an infrared probe of protein local environment: what determines its frequency?

Recently it has been suggested that the C≡N stretching vibration of a tryptophan analog, 5-cyanotryptophan, could be used as an infrared probe of the local environment, especially the hydration status, of tryptophan residues in proteins. However, the factors that influence the frequency of this vibrational mode are not understood. To determine these factors, herein we carried out linear and nonlinear infrared measurements on the C≡N stretching vibration of the sidechain of 5-cyanotryptophan, 3-methyl-5-cyanoindole, in a series of protic and aprotic solvents. We found that while the C≡N stretching frequencies obtained in these solvents do not correlate well with any individual Kamlet-Taft solvent parameter, i.e., π* (polarizability), ß (hydrogen bond accepting ability), and α (hydrogen bond donating ability), they do however, collapse on a straight line when plotted against σ = π* + ß - α. This linear relationship provides a firm indication that both specific interactions, i.e., hydrogen-bonding interactions with the C≡N (through α) and indole N-H (through ß) groups, and non-specific interactions with the molecule (through π*) work together to determine the C≡N stretching frequency, thus laying a quantitative framework for applying 5-cyanotryptophan to investigate the microscopic environment of proteins in a site-specific manner. Furthermore, two-dimensional and pump-probe infrared measurements revealed that a significant portion (∼31%) of the ground state bleach signal has a decay time constant of ∼12.3 ps, due to an additional vibrational relaxation channel, making it possible to use 5-cyanotryptophan to probe dynamics occurring on a timescale on the order of tens of picoseconds.

Infrared and fluorescence assessment of the hydration status of the tryptophan gate in the influenza A M2 proton channel.

The M2 proton channel of the influenza A virus has been the subject of extensive studies because of its critical role in viral replication. As such, we now know a great deal about its mechanism of action, especially how it selects and conducts protons in an asymmetric fashion. The conductance of this channel is tuned to conduct protons at a relatively low biologically useful rate, which allows acidification of the viral interior of a virus entrapped within an endosome, but not so great as to cause toxicity to the infected host cell prior to packaging of the virus. The dynamic, structural and chemical features that give rise to this tuning are not fully understood. Herein, we use a tryptophan (Trp) analog, 5-cyanotryptophan, and various methods, including linear and nonlinear infrared spectroscopies, static and time-resolved fluorescence techniques, and molecular dynamics simulations, to site-specifically interrogate the structure and hydration dynamics of the Trp41 gate in the transmembrane domain of the M2 proton channel. Our results suggest that the Trp41 sidechain adopts the t90 rotamer, the χ2 dihedral angle of which undergoes an increase of approximately 35° upon changing the pH from 7.4 to 5.0. Furthermore, we find that Trp41 is situated in an environment lacking bulk-like water, and somewhat surprisingly, the water density and dynamics do not show a measurable difference between the high (7.4) and low (5.0) pH states. Since previous studies have shown that upon channel opening water flows into the cavity above the histidine tetrad (His37), the present finding thus provides evidence indicating that the lack of sufficient water molecules near Trp41 needed to establish a continuous hydrogen bonding network poses an additional energetic bottleneck for proton conduction.

Kinetics of peptide folding in lipid membranes.

Despite our extensive understanding of water-soluble protein folding kinetics, much less is known about the folding dynamics and mechanisms of membrane proteins. However, recent studies have shown that for relatively simple systems, such as peptides that form a transmembrane α-helix, helical dimer, or helix-turn-helix, it is possible to assess the kinetics of several important steps, including peptide binding to the membrane from aqueous solution, peptide folding on the membrane surface, helix insertion into the membrane, and helix-helix association inside the membrane. Herein, we provide a brief review of these studies and also suggest new initiation and probing methods that could lead to improved temporal and structural resolution in future experiments.

Aggregation gatekeeper and controlled assembly of Trpzip ß-hairpins.

Protein and peptide aggregation is an important issue both in vivo and in vitro. Herein, we examine the aggregation behaviors of two well-studied ß-hairpins, Trpzip1 and Trpzip2. Previous studies suggested that Trpzip2 remains monomeric up to a concentration of ~15 mM whereas Trpzip1 readily aggregates at micromolar concentrations at acidic or neutral pH. This disparity is puzzling considering that these two peptides differ only in their turn sequences (i.e., GN vs NG). We hypothesize that these peptides can aggregate from their folded states via native edge-to-edge interactions and that the Lys8 residue in Trpzip2 is a more effective aggregation gatekeeper, because of a more favorable orientation. In support of this hypothesis, we find that increasing the pH to 13 or replacing Lys8 with a hydrophobic and photolabile Lys analogue, Lys(nvoc), leads to a significant increase in the aggregation propensity of Trpzip2, and that the aggregation of this Trpzip2 mutant can be reversed upon restoring the native Lys side chain via photocleavage of the nvoc moiety. In addition, we find that while both Trpzip1 and Trpzip2 form parallel ß-sheet aggregates, the Lys(nvoc) Trpzip2 mutant forms antiparallel ß-sheets and more stable fibrils. Taken together, these findings provide another example showing how sensitive peptide and protein aggregation is to minor sequence variation and that it is possible to use a photolabile non-natural amino acid, such as Lys(nvoc), to tune the rate of peptide aggregation and to control fibrillar structure.

Amide I Band and Photoinduced Disassembly of a Peptide Hydrogel.

Peptide hydrogels are promising candidates for a wide range of medical and biotechnological applications. To further expand the potential utility of peptide hydrogels, herein we demonstrate a simple yet effective strategy to render peptide hydrogels photodegradable, making controlled disassembly of the gel structure of interest feasible. In addition, we find that the high-frequency amide I' component (i.e., the peak at ~1685 cm-1) of the photodegradable peptide hydrogel studied shows an unusually large enhancement, in comparison to that of other peptide fibrils consisting of antiparallel ß-sheets, making it a good model system for further study of the coupling-structure relationship.

Utility of 5-Cyanotryptophan Fluorescence as a Sensitive Probe of Protein Hydration.

Tryptophan (Trp) fluorescence has been widely used to interrogate the structure, dynamics, and function of proteins. In particular, it provides a convenient and site-specific means to probe a protein's hydration status and dynamics. Herein, we show that a tryptophan analogue, 5-cyanotryptophan (TrpCN), can also be used for this purpose, but with the benefit of enhanced sensitivity to hydration. This conclusion is reached based on measurements of the static and time-resolved fluorescence properties of 5-cyanoindole, TrpCN, and TrpCN-containing peptides in different solvents, which indicate that upon dehydration the fluorescence quantum yield (QY) and lifetime (τF) of TrpCN undergo a much greater change in comparison to those of Trp. For example, in H2O the QY of TrpCN is less than 0.01, which increases to 0.11 in 1,4-dioxane. Consistently, the fluorescence decay kinetics of TrpCN in H2O are dominated by a 0.4 ns component, whereas in 1,4-dioxane the kinetics are dominated by a 6.0 ns component. The versatile utility of TrpCN as a sensitive fluorescence reporter is further demonstrated in three applications, where we used it (1) to probe the solvent property of a binary mixture consisting of dimethyl sulfoxide and H2O, (2) to monitor the binding interaction of an antimicrobial peptide with lipid membranes, and (3) to differentiate two differently hydrated environments in a folded protein.

Tightening up the structure, lighting up the pathway: Application of molecular constraints and light to manipulate protein folding, self-assembly and function.

Chemical cross-linking provides an effective avenue to reduce the conformational entropy of polypeptide chains and hence has become a popular method to induce or force structural formation in peptides and proteins. Recently, other types of molecular constraints, especially photoresponsive linkers and functional groups, have also found increased use in a wide variety of applications. Herein, we provide a concise review of using various forms of molecular strategies to constrain proteins, thereby stabilizing their native states, gaining insight into their folding mechanisms, and/or providing a handle to trigger a conformational process of interest with light. The applications discussed here cover a wide range of topics, ranging from delineating the details of the protein folding energy landscape to controlling protein assembly and function.

How quickly can a ß-hairpin fold from its transition state?

Understanding the structural nature of the free energy bottleneck(s) encountered in protein folding is essential to elucidating the underlying dynamics and mechanism. For this reason, several techniques, including Φ-value analysis, have previously been developed to infer the structural characteristics of such high free-energy or transition states. Herein we propose that one (or few) appropriately placed backbone and/or side chain cross-linkers, such as disulfides, could be used to populate a thermodynamically accessible conformational state that mimics the folding transition state. Specifically, we test this hypothesis on a model ß-hairpin, Trpzip4, as its folding mechanism has been extensively studied and is well understood. Our results show that cross-linking the two ß-strands near the turn region increases the folding rate by an order of magnitude, to about (500 ns)(−1), whereas cross-linking the termini results in a hyperstable ß-hairpin that has essentially the same folding rate as the uncross-linked peptide. Taken together, these findings suggest that cross-linking is not only a useful strategy to manipulate folding free energy barriers, as shown in other studies, but also, in some cases, it can be used to stabilize a folding transition state analogue and allow for direct assessment of the folding process on the downhill side of the free energy barrier. The calculated free energy landscape of the cross-linked Trpzip4 also supports this picture. An empirical analysis further suggests, when folding of ß-hairpins does not involve a significant free energy barrier, the folding time (τ) follows a power law dependence on the number of hydrogen bonds to be formed (n(H)), namely, τ = τ(0)n(H)(α), with τ(0) = 20 ns and α = 2.3.

Assessment of local friction in protein folding dynamics using a helix cross-linker.

Internal friction arising from local steric hindrance and/or the excluded volume effect plays an important role in controlling not only the dynamics of protein folding but also conformational transitions occurring within the native state potential well. However, experimental assessment of such local friction is difficult because it does not manifest itself as an independent experimental observable. Herein, we demonstrate, using the miniprotein trp-cage as a testbed, that it is possible to selectively increase the local mass density in a protein and hence the magnitude of local friction, thus making its effect directly measurable via folding kinetic studies. Specifically, we show that when a helix cross-linker, m-xylene, is placed near the most congested region of the trp-cage it leads to a significant decrease in both the folding rate (by a factor of 3.8) and unfolding rate (by a factor of 2.5 at 35 °C) but has little effect on protein stability. Thus, these results, in conjunction with those obtained with another cross-linked trp-cage and two uncross-linked variants, demonstrate the feasibility of using a nonperturbing cross-linker to help quantify the effect of internal friction. In addition, we estimate that a m-xylene cross-linker could lead to an increase in the roughness of the folding energy landscape by as much as 0.4-1.0k(B)T.