Parameters influencing auditory fatigue among professionals working in the amplified music sector: noise exposure and individual factors.

OBJECTIVE: Hearing disorders are common among music professionals, as they are frequently exposed to sound levels exceeding 100 dB(A). By assessing auditory fatigue, situations that are deleterious for hearing could be identified, allowing the deployment of preventive measures before permanent impairment occurs. However, little is known about the factors contributing to auditory fatigue. The objective is to determine the exposure parameters most influencing auditory fatigue during occupational exposure to amplified music. DESIGN: Auditory fatigue was defined as variations of both pure tone auditory (ΔPTA) and efferent reflex thresholds (ΔER) during the workday. Noise exposure was monitored and information on the volunteers was gathered using a questionnaire. STUDY SAMPLE: The population consisted of 43 adult volunteers exposed to amplified music (sound, light or stage technicians, security agents, barmen) and 24 unexposed administrative agents. RESULTS: ΔPTA and ΔER were positively correlated with the energy of noise exposure and its stability over time, i.e a steady noise tends to create more auditory fatigue. CONCLUSION: In addition to a global decrease of music levels and a systematic use of hearing protection, our results advocate for the provision of quiet periods within noise exposures as they reduce auditory fatigue accumulation and long-term risks for hearing.

Structure and Dynamics of the Central Lipid Pool and Proteins of the Bacterial Holo-Translocon.

The bacterial Sec translocon, SecYEG, associates with accessory proteins YidC and the SecDF-YajC subcomplex to form the bacterial holo-translocon (HTL). The HTL is a dynamic and flexible protein transport machine capable of coordinating protein secretion across the membrane and efficient lateral insertion of nascent membrane proteins. It has been hypothesized that a central lipid core facilitates the controlled passage of membrane proteins into the bilayer, ensuring the efficient formation of their native state. By performing small-angle neutron scattering on protein solubilized in "match-out" deuterated detergent, we have been able to interrogate a "naked" HTL complex, with the scattering contribution of the surrounding detergent micelle rendered invisible. Such an approach has allowed the confirmation of a lipid core within the HTL, which accommodates between 8 and 29 lipids. Coarse-grained molecular dynamics simulations of the HTL also demonstrate a dynamic, central pool of lipids. An opening at this lipid-rich region between YidC and the SecY lateral gate may provide an exit gateway for newly synthesized, correctly oriented, membrane protein helices, or even small bundles of helices, to emerge from the HTL.

Composition and Activity of the Non-canonical Gram-positive SecY2 Complex.

The accessory Sec system in Streptococcus gordonii DL1 is a specialized export system that transports a large serine-rich repeat protein, Hsa, to the bacterial surface. The system is composed of core proteins SecA2 and SecY2 and accessory Sec proteins Asp1-Asp5. Similar to canonical SecYEG, SecY2 forms a channel for translocation of the Hsa adhesin across the cytoplasmic membrane. Accessory Sec proteins Asp4 and Asp5 have been suggested to work alongside SecY2 to form the translocon, similar to the associated SecY, SecE, and SecG of the canonical system (SecYEG). To test this theory, S. gordonii secY2, asp4, and asp5 were co-expressed in Escherichia coli The resultant complex was subsequently purified, and its composition was confirmed by mass spectrometry to be SecY2-Asp4-Asp5. Like SecYEG, the non-canonical complex activates the ATPase activity of the SecA motor (SecA2). This study also shows that Asp4 and Asp5 are necessary for optimal adhesion of S. gordonii to glycoproteins gp340 and fibronectin, known Hsa binding partners, as well as for early stage biofilm formation. This work opens new avenues for understanding the structure and function of the accessory Sec system.

Membrane protein insertion and assembly by the bacterial holo-translocon SecYEG-SecDF-YajC-YidC.

Protein secretion and membrane insertion occur through the ubiquitous Sec machinery. In this system, insertion involves the targeting of translating ribosomes via the signal recognition particle and its cognate receptor to the SecY (bacteria and archaea)/Sec61 (eukaryotes) translocon. A common mechanism then guides nascent transmembrane helices (TMHs) through the Sec complex, mediated by associated membrane insertion factors. In bacteria, the membrane protein 'insertase' YidC ushers TMHs through a lateral gate of SecY to the bilayer. YidC is also thought to incorporate proteins into the membrane independently of SecYEG. Here, we show the bacterial holo-translocon (HTL) - a supercomplex of SecYEG-SecDF-YajC-YidC - is a bona fide resident of the Escherichia coli inner membrane. Moreover, when compared with SecYEG and YidC alone, the HTL is more effective at the insertion and assembly of a wide range of membrane protein substrates, including those hitherto thought to require only YidC.

Occupational exposure to metals among battery recyclers in France: Biomonitoring and external dose measurements.

In battery-recycling facilities, exposure to trace elements may occur through inhalation of contaminated dust or vapor emanating from the treatment processes. Exposure of battery-recycling workers to lead has been quite well covered in the literature. In contrast, we lack data on exposure to other elements contained in batteries. The aim of this study was to characterize the exposure of French battery recyclers to multiple elements using biomonitoring and airborne measurements. Eighty-six workers participated in the study. Inhalable metal concentrations were determined for personal airborne samples, and total exposure was determined from pre-shift and post-shift urine samples collected during the working week. In both types of sample, a total of 33 trace elements were measured using inductively coupled plasma mass spectrometry. Results showed battery recyclers to be mostly exposed to Cd, Co, Cr, Li, Mn, Ni, and Pb. Administrative and sorting workers were exposed at lower levels than maintenance, treatment, and dismantling workers. Cd, Co, Li, Mn, and Ni were detected at high levels in air samples, especially near the treatment facilities, with airborne cadmium levels of up to 79.4 µg/m3. Urinary sample analysis indicated exposure to Cd and Co, with levels measured at up to 27.6 and 3.34 µg/g of creatinine, respectively. Concentrations were compared to data reported for e-waste recycling companies. The data presented provide valuable information on exposure to trace elements for workers involved in battery-recycling. They also highlight the need to improve both collective and individual protective measures, which were not sufficient in the participating companies.

Is Urinary Chromium Specific to Hexavalent Chromium Exposure in the Presence of Co-exposure to Other Chromium Compounds? A Biomonitoring Study in the Electroplating Industry.

OBJECTIVES: Electroplating processes are widely used in metal industries to improve the resistance properties of manufactured metal parts. Workers in this industry are potentially exposed both to hexavalent chromium (Cr(VI)) and to other chromium compounds [mostly trivalent chromium (Cr(III))], due to the use of chromic acid baths. The goal of this study was to validate urinary chromium as a Cr(VI) exposure biomarker in the presence of exposure to other chromium compounds. METHODS: A biomonitoring study consisted in monitoring airborne chromium exposure and urinary chromium for one working week in 93 workers from nine electroplating companies. Chromium concentrations were measured in all urinations of each volunteer for the working week. Individual airborne soluble and insoluble Cr(VI) as well as Cr(III) concentrations were measured for all of the shifts of the week. The main statistical analysis consisted in modelling, in a Bayesian framework, the pre- and post-shift urinary chromium as a function of airborne Cr(III) and airborne Cr(VI), taking into account the day of the week and the time of collection of the urines (pre- or post-shift). RESULTS: Preliminary descriptions showed an increase in pre-shift urinary chromium during the working week. The model showed an increase in urinary chromium over the shift related to the shift-specific airborne Cr(VI) concentration as well as an increasing trend over the week and a relationship with the mean weekly Cr(VI) thought to reflect chronic exposure. Taking into account the Cr(VI) exposure, there was no evidence of an effect of Cr(III) exposure on urinary chromium. A biological limit value (BLV) was derived from the French occupational exposure limit for Cr(VI) of 1 µg m-3 and was estimated at between 1.9 and 2.6 µg g-1 creatinine for a urinary sample collected at the end of the shift on the last working day of the week. CONCLUSIONS: In the present context of mixed exposure to Cr(III) and Cr(VI) in electroplating, this study showed that urinary chromium depended only on airborne Cr(VI) concentrations, which justifies using a BLV for assessing workers' exposure. The estimated BLV was close to the recommended French BLV, which is 1.8 µg g-1 creatinine, in the electroplating industry.

Bivariate Left-Censored Measurements in Biomonitoring: A Bayesian Model for the Determination of Biological Limit Values Based on Occupational Exposure Limits.

Biological limit values (BLV) are often determined from the occupational exposure limits (OEL) in modelling biological data obtained on a number of exposed subjects based on measurements of air exposure. In order to obtain such BLVs, biomonitoring studies are conducted collecting simultaneously biological and airborne measurements to these substances in exposed workers. One obstacle in the modelling of such data is the often large number of values below the limit of detection (LOD) for both biological and airborne measurements (left-censored measurements). A second difficulty, which is also a strength, is that multiple measurements are obtained for the same workers, leading to non-independence of the data. In this paper, we propose a statistical method based on Bayesian theory making use of measurements below the LOD for both dependent (biological) and independent (air exposure) data, and taking into account multiple measurements on the same worker. This method relies on the modelling of the airborne exposure measurements using standard random effect models adapted for values below LOD and the simultaneous modelling of the biological measurements assumed to be linearly (on the log scale) related to the airborne exposure while accounting for between-worker variability. This method is validated by a simulation study in which up to 50% of the measurements are censored for both variables in realistic settings. This simulation study shows that the proposed method is uniformly more efficient than the candidate alternative we considered (maximum likelihood estimation; MLE method) that did not make use of a data with airborne measurements below the LOD. When the method is applied on a real biomonitoring data set among electroplating workers exposed to chromium with 54% censored airborne measurements and 20% censored urinary measurements, the slope is steeper when incorporating these data using the proposed Bayesian method leading to different BLV estimations depending on the OEL used.

A central cavity within the holo-translocon suggests a mechanism for membrane protein insertion.

The conserved SecYEG protein-conducting channel and the accessory proteins SecDF-YajC and YidC constitute the bacterial holo-translocon (HTL), capable of protein-secretion and membrane-protein insertion. By employing an integrative approach combining small-angle neutron scattering (SANS), low-resolution electron microscopy and biophysical analyses we determined the arrangement of the proteins and lipids within the super-complex. The results guided the placement of X-ray structures of individual HTL components and allowed the proposal of a model of the functional translocon. Their arrangement around a central lipid-containing pool conveys an unexpected, but compelling mechanism for membrane-protein insertion. The periplasmic domains of YidC and SecD are poised at the protein-channel exit-site of SecY, presumably to aid the emergence of translocating polypeptides. The SecY lateral gate for membrane-insertion is adjacent to the membrane 'insertase' YidC. Absolute-scale SANS employing a novel contrast-match-point analysis revealed a dynamic complex adopting open and compact configurations around an adaptable central lipid-filled chamber, wherein polytopic membrane-proteins could fold, sheltered from aggregation and proteolysis.