Low-dose in vivo protection and neutralization across SARS-CoV-2 variants by monoclonal antibody combinations.

Prevention of viral escape and increased coverage against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants of concern require therapeutic monoclonal antibodies (mAbs) targeting multiple sites of vulnerability on the coronavirus spike glycoprotein. Here we identify several potent neutralizing antibodies directed against either the N-terminal domain (NTD) or the receptor-binding domain (RBD) of the spike protein. Administered in combinations, these mAbs provided low-dose protection against SARS-CoV-2 infection in the K18-human angiotensin-converting enzyme 2 mouse model, using both neutralization and Fc effector antibody functions. The RBD mAb WRAIR-2125, which targets residue F486 through a unique heavy-chain and light-chain pairing, demonstrated potent neutralizing activity against all major SARS-CoV-2 variants of concern. In combination with NTD and other RBD mAbs, WRAIR-2125 also prevented viral escape. These data demonstrate that NTD/RBD mAb combinations confer potent protection, likely leveraging complementary mechanisms of viral inactivation and clearance.

Targeting the Spike Receptor Binding Domain Class V Cryptic Epitope by an Antibody with Pan-Sarbecovirus Activity.

Novel therapeutic monoclonal antibodies (MAbs) must accommodate comprehensive breadth of activity against diverse sarbecoviruses and high neutralization potency to overcome emerging variants. Here, we report the crystal structure of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) receptor binding domain (RBD) in complex with MAb WRAIR-2063, a moderate-potency neutralizing antibody with exceptional sarbecovirus breadth, that targets the highly conserved cryptic class V epitope. This epitope overlaps substantially with the spike protein N-terminal domain (NTD) -interacting region and is exposed only when the spike is in the open conformation, with one or more RBDs accessible. WRAIR-2063 binds the RBD of SARS-CoV-2 WA-1, all variants of concern (VoCs), and clade 1 to 4 sarbecoviruses with high affinity, demonstrating the conservation of this epitope and potential resiliency against variation. We compare structural features of additional class V antibodies with their reported neutralization capacity to further explore the utility of the class V epitope as a pan-sarbecovirus vaccine and therapeutic target. IMPORTANCE Characterization of MAbs against SARS-CoV-2, elicited through vaccination or natural infection, has provided vital immunotherapeutic options for curbing the COVID-19 pandemic and has supplied critical insights into SARS-CoV-2 escape, transmissibility, and mechanisms of viral inactivation. Neutralizing MAbs that target the RBD but do not block ACE2 binding are of particular interest because the epitopes are well conserved within sarbecoviruses and MAbs targeting this area demonstrate cross-reactivity. The class V RBD-targeted MAbs localize to an invariant site of vulnerability, provide a range of neutralization potency, and exhibit considerable breadth against divergent sarbecoviruses, with implications for vaccine and therapeutic development.

Differences in neutralizing antibody sensitivities and envelope characteristics indicate distinct antigenic properties of Nigerian HIV-1 subtype G and CRF02_AG.

The magnitude of the HIV-1 epidemic in Nigeria is second only to the subtype C epidemic in South Africa, yet the subtypes prevalent in Nigeria require further characterization. A panel of 50 subtype G and 18 CRF02_AG Nigerian HIV-1 pseudoviruses (PSV) was developed and envelope coreceptor usage, neutralization sensitivity and cross-clade reactivity were characterized. These PSV were neutralized by some antibodies targeting major neutralizing determinants, but potentially important differences were observed in specific sensitivities (eg. to sCD4, MPER and V2/V3 monoclonal antibodies), as well as in properties such as variable loop lengths, number of potential N-linked glycans and charge, demonstrating distinct antigenic characteristics of CRF02_AG and subtype G. There was preferential neutralization of the matched CRF/subtype when PSV from subtype G or CRF02_AG were tested using pooled plasma. These novel Nigerian PSV will be useful to study HIV-1 CRF- or subtype-specific humoral immune responses for subtype G and CRF02_AG.

Age- and Sex-Associated Wnt Signaling Dysregulation is Exacerbated from the Early Stages of Neuropathology in an Alzheimer's Disease Model.

Emerging studies suggest that Wnt signaling is dysregulated in the brains of AD patients, suggesting that this pathway may also contribute to disease progression. However, it remains to be determined whether alterations in the Wnt pathway are the cause or consequence of this disease and which elements of Wnt signaling mainly contribute to the appearance of AD histopathological markers early in disease compared to what occurs during normal aging. The present study aimed to describe the status of several canonical Wnt pathway components and the expression of the AD marker p-tau in the hippocampi of female and male 3xTg-AD mice during disease progression compared to those during normal aging. We analyzed the levels of the canonical Wnt components Wnt7a, Dkk-1, LRP6 and GSK3ß as well as the levels of p-tau and BDNF at 3, 6, 9-12 and 18 months of age. We found a gradual increase in Dkk-1 levels during aging prior to Wnt7a and LRP5/6 depletion, which was strongly exacerbated in 3xTg-AD mice even at young ages and correlated with GSK3ß activation and p-tau-S202/Thr205 expression. Dkk-1 upregulation, as well as the level of p-tau, was significantly greater in females than in males. Our results suggest that Dkk-1 upregulation is involved in the expression of several features of AD at early stages, which supports the possibility of positively modulating the canonical Wnt pathway as a therapeutic tool to delay this disease at early stages.

Effects of photobiomodulation on different phases of in vitro osteogenesis.

The present study aimed to evaluate the effect of photobiomodulation therapy (PBM) on different stages of osteogenesis in vitro. For this, osteoblastic-like cells (Saos-2 cell lineage) were irradiated in two different periods: during the Proliferation phase (PP; from the second to the fourth day) and during the Differentiation phase (DP; from the seventh to the ninth day). The energy density used in the study was 1.5 J/ cm2. The following parameters were evaluated: 1) quantification of collagen type 1 (COL 1), osteopontin (OPN), and bone morphogenetic protein 2 (BMP-2); 2) quantification of alkaline phosphatase (ALP) activity; and 3) quantification of  extracellular matrix (ECM) mineralization. Non-irradiated cultures were used as controls. The data were analyzed using the Student's t-test or one-way ANOVA, considering a significance level of 5%. The results indicated that COL 1 and BMP-2 quantification was higher in Saos-2 irradiated during the DP in relation to the control group at day 10 (p < 0.05). No differences were observed for other comparisons at this time point (p > 0.05). OPN expression was greater in PP compared with the other experimental groups at day 10 (p < 0.05). Irradiation did not affect ALP activity in Saos-2 regardless of the exposure phase and the time point evaluated (p > 0.05). At day 14, ECM mineralization was higher in Saos-2 cultures irradiated during the DP in relation to the PP (p < 0.05). In conclusion, the results suggested that the effects of PBM on osteoblastic cells may be influenced by the stage of cell differentiation.

Efficacy and breadth of adjuvanted SARS-CoV-2 receptor-binding domain nanoparticle vaccine in macaques.

Emergence of novel variants of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) underscores the need for next-generation vaccines able to elicit broad and durable immunity. Here we report the evaluation of a ferritin nanoparticle vaccine displaying the receptor-binding domain of the SARS-CoV-2 spike protein (RFN) adjuvanted with Army Liposomal Formulation QS-21 (ALFQ). RFN vaccination of macaques using a two-dose regimen resulted in robust, predominantly Th1 CD4+ T cell responses and reciprocal peak mean serum neutralizing antibody titers of 14,000 to 21,000. Rapid control of viral replication was achieved in the upper and lower airways of animals after high-dose SARS-CoV-2 respiratory challenge, with undetectable replication within 4 d in seven of eight animals receiving 50 µg of RFN. Cross-neutralization activity against SARS-CoV-2 variant B.1.351 decreased only approximately twofold relative to WA1/2020. In addition, neutralizing, effector antibody and cellular responses targeted the heterotypic SARS-CoV-1, highlighting the broad immunogenicity of RFN-ALFQ for SARS-CoV-like Sarbecovirus vaccine development.

The effect of root canal preparation tapers on planktonic bacteria and biofilm reduction in the apical third: A correlative microtomography and microbiological laboratory study.

AIM: To evaluate the influence of different preparation tapers on the reduction in planktonic bacteria and biofilms of Enterococcus faecalis and Candida albicans in the apical third (4 mm) of the mesial roots of mandibular molars, correlating decontamination with canal shape. METHODOLOGY: After microtomography analysis for morphological standardization of the canals, 48 mandibular molar roots, each containing two canals (96 canals), were contaminated with E. faecalis and C. albicans and divided into four groups (n = 11) for canal instrumentation using ProDesign Logic 2 files with different tapers G (.03): # 25.03; G (.04): # 25.04; G (.05): # 25.05; and G (.06): # 25.06 and irrigation with 2.5% sodium hypochlorite. Four roots were examined under a scanning electron microscope (SEM) to qualitatively assess biofilm formation. Eight roots were used as the negative control group (samples were not contaminated). Bacteriological samples were taken exclusively from the apical third of the roots before and after chemical-mechanical preparation and bacterial counts were determined (CFU/mL). The final micro-CT scan was used to quantify the volume variation and unprepared canal area in the apical third. Statistical analysis was performed using the Kruskal-Wallis, Student-Newman-Keuls and Wilcoxon tests for analysis of microbiological data. anova and the Tukey or Games-Howell test were used for analysis of micro-CT data and Spearman's test for correlations (α = 5%). RESULTS: All groups showed a significant reduction in bacteria (p < .05), with no statistically significant difference between groups. There was no significant difference in per cent volume increase between groups. The unprepared area (Δ%) was affected by the file used (p = .026) and was significantly lower for G (.06) compared to G (.03). There was no statistically significant correlation among bacterial reduction, volume and unprepared area (p > .05). CONCLUSION: The different preparation tapers influenced root canal shaping in the apical third but did not improve decontamination in this region.

Short implants: Influence of different diameters, torques, and transmucosal heights of straight prosthetic abutments on screw preload loss after cycling.

This study evaluated the influence of different implant diameters, insertion torques, and transmucosal heights on the loosening of abutments installed on short implants, after mechanical cycling. The Morse taper connection implants (n = 96) tested were 5 mm high, divided according to the platform diameter: 4 or 6 mm. A universal abutment was coupled to each implant (with different transmucosal heights: 1 or 5 mm). The sets were subdivided into 20- and 32-Ncm torque. After the cycle fatigue test, the detorque values were measured with a digital torque indicator. After mechanical cycling, the mean detorque values obtained for the abutment with 20-Ncm insertion torque were lower than for implants with 32-Ncm insertion torque, regardless of the platform diameter or transmucosal height. In the 20-Ncm torque group, there was no statistically significant difference in the detorque values between platform diameters or transmucosal heights. Otherwise, for 32-Ncm sets, a smaller platform diameter (4 mm), and a longer transmucosal height (5 mm) showed the lowest detorque values. In conclusion, implants placed with 32-Ncm insertion torque and abutments with 1 mm transmucosal height and a 6 mm implant diameter demonstrated the highest detorque values.

Hyperspectral camera as a compact payload architecture for remote sensing applications.

Monitoring and observation over the surface of the Earth have been a matter of global interest. In this path, recent efforts aim to develop a spatial mission to perform remote sensing applications. Mainly, CubeSat nanosatellites have emerged as a standard for developing low-weight and small-sized instruments. In terms of payloads, state-of-the-art optical systems for CubeSats are expensive and designed to work in general use cases. To overcome these limitations, this paper presents a 1.4 U compact optical system to acquire spectral images from a CubeSat standard satellite at the height of 550 km. To validate the proposed architecture, optical simulations using ray tracing simulation software are presented. Because the performance of computer vision tasks is highly related to data quality, we compared the optical system in terms of the classification performance on a real remote sensing application. The performances of the optical characterization and land cover classification show that the proposed optical system achieves a compact instrument, operating at a spectral range from 450 nm to 900 nm discretized on 35 spectral bands. The optical system has an overall f-number of 3.41 with a ground sampling distance of 52.8 m and a swath of 40 km. Additionally, the design parameters for each optical element are publicly available for validation, repeatability, and reproducibility of the results.

Revisiting metal fluorides as lithium-ion battery cathodes.

Metal fluorides, promising lithium-ion battery cathode materials, have been classified as conversion materials due to the reconstructive phase transitions widely presumed to occur upon lithiation. We challenge this view by studying FeF3 using X-ray total scattering and electron diffraction techniques that measure structure over multiple length scales coupled with density functional theory calculations, and by revisiting prior experimental studies of FeF2 and CuF2. Metal fluoride lithiation is instead dominated by diffusion-controlled displacement mechanisms, and a clear topological relationship between the metal fluoride F- sublattices and that of LiF is established. Initial lithiation of FeF3 forms FeF2 on the particle's surface, along with a cation-ordered and stacking-disordered phase, A-LixFeyF3, which is structurally related to α-/ß-LiMn2+Fe3+F6 and which topotactically transforms to B- and then C-LixFeyF3, before forming LiF and Fe. Lithiation of FeF2 and CuF2 results in a buffer phase between FeF2/CuF2 and LiF. The resulting principles will aid future developments of a wider range of isomorphic metal fluorides.

Potential assessment of probiotic Cystobasidium benthicum LR192 strain in mice.

Antibiotic bacterial resistant is a huge concern worldwide and probiotics offer an alternative to mitigate it. This study explores Cystobasidium benthicum LR192 as possible probiotic through microbiological and immunological analyses in mouse model. C. benthicum LR192 was isolated from lichens in a hyperarid environment in Baja California Sur, Mexico. First, microbiological analysis was assessed using 1 × 105 CFU/mL in YM broth: resistance to 1% of bile salts and pH of 2, 3 and 5 (control). Then, yeast capacity to adhere onto the intestinal mucosa and safety to mouse splenocytes were tested. Finally, immunological parameters (phagocytic ability, respiratory burst and myeloperoxidase activities, nitric oxide and IgG production) and immune-associated gene expression (IL-1ß, IL-6 and INF-γ) were determined in daily supplemented mice with the yeast (1 × 108 CFU) at days 10 and 15. The results indicate that C. benthicum LR192 has medium resistance to bile salts and low pH, can adhere to the intestine and did not cause cytotoxicity in splenocytes. Immune parameters and immune-related gene expression indicated immunomodulation at day 10 and 15, specially in leucocytes challenged with Escherichia coli. In conclusion, C. benthicum LR192 showed safe potential probiotic properties, but further studies should be performed to confirm it as a probiotic prospect for humans.

Uneven vectorial projection is the best explanation for QRS dispersion, not the asynchronic ventricular activation.

BACKGROUND: It is believed that QRS dispersion (QRSd) is caused by asynchrony of ventricular activation, but there are no studies that prove it. OBJECTIVES: To determine the mechanism that best explains QRSd in surface electrocardiogram (ECG). METHODS: Cross-sectional study in 95 consecutive patients (median age: 31.0 years [25-52], female sex: 66.3%) with atrioventricular nodal reentrant tachycardia. All 12 ECG leads were recorded at once, simultaneously with the intracardiac recordings. QRSd was quantified as the difference between maximum (QRSmax) and minimum QRS duration (QRSmin). QRS was measured firstly at a calibration of 20 mm/mV and a sweep speed of 50 mm/s, enhancement 10× (basic measurement [BM]), and after at sweep speed of 150 mm/s, enhancement 80 - 160×. The interventricular dyssynchrony (IVD) was also quantified. RESULTS: QRSmax increased from BM (98 ms [91-103]) to 80× (102 ms [99-108]; p = 0.029) and 160× (104 ms [101.5-110]; p = 0.027). QRSmin, almost equaled the duration of QRSmax at 160× (103 ms [100-108]). With BM, QRSd was 26 ms [22-35] and was reduced 26-fold (p < 0.001) by magnifying the QRS at 160× (1 ms [0-3]). IVD was weakly correlated with QRSd (r = 0.234, p = 0.023), but strongly with the total QRS at 160× (r = 0.676, p < 0.001). CONCLUSION: When QRS complex is narrow, the best explanation for the origin of QRSd on the surface ECG is the unequal projection of the ventricular depolarization vector in the different axis of the leads.

Histomorphometric evaluation of different graft associations for maxillary sinus elevation in wide antral cavities: a randomized controlled clinical trial.

OBJECTIVES: Pneumatization of the maxillary sinus can make it difficult, if not impossible, to install osseointegrated implants, and undertake their eventual functional rehabilitation, which may ultimately require regenerative techniques to achieve. This randomized controlled study proposed conducting a histological evaluation of the behavior of different graft materials in wide maxillary sinuses, at a height of 8 to 10 mm from the alveolar ridge, combined with bone remnants less than 3mm. MATERIALS AND METHODS: Thirty-six patients underwent a sinus elevation procedure through the lateral window. The sinuses were randomly filled with the following materials (n=12/group): group 1, xenogenic bone + autogenous bone (ratio 70:30, respectively); group 2, xenogenic bone + L-PRF; and group 3, xenogenic bone. At 8 months, bone biopsies of engrafted sites were harvested and analyzed histomorphometrically in order to quantify newly formed bone tissue. RESULTS: The results showed a greater area of newly formed bone for G1, averaging 2678.37 (1116.40) µm2, compared with G2 at 984.87 (784.27) µm2, and G3 at 480.66 (384.76) µm2 (p < 0.05). Additionally, fewer xenogenic bone particles and a large amount of connective tissue were observed in G2. CONCLUSIONS: In maxillary sinuses with large antral cavities, autogenous bone combined with xenogenic bone seems to demonstrate better graft remodeling and improve bone formation, compared with the addition of L-PRF. CLINICAL RELEVANCE: L-PRF produces few advantages regarding new bone formation in the wide maxillary sinuses. TRIAL REGISTRATION: Brazilian Clinical Trials Registry (REBEC) number RBR-2pbbrvg.

Analysis of the Viability and Morphology of Gingival Cells on Materials Used in Novel Prosthetic Components: In Vitro Study.

AIM: The objective of this in vitro study was to evaluate the viability and morphology of human fibroblasts and keratinocytes cells, both grown on stainless steel (steel) (18Cr14Ni2.5Mo), and polyether-ether-ketone (PEEK) surfaces, hypothesizing the use of these surfaces as novel materials for prosthetic components. MATERIALS AND METHODS: Gingival human keratinocytes and gingival human fibroblasts lines were grown on discs made by steel (n = 36), PEEK (n = 36), and titanium (Ti) (Ti6A14V) (n = 36)-control. For viability assay, cultures were grown at 24 hours (TV1), 48 hours (TV2), and 72 hours (TV3) times and evaluated by the colorimetric tetrazolium assay (MTT). For morphology and cell adhesion assays, after 24 hours (TM1), 48 hours (TM2), and 96 hours (TM3) of cell culture, cells were examined by scanning electron microscopy (SEM) and analyzed at magnifications with 500×, 1,000×, and 2,500×. RESULTS: Regarding the viability, the keratinocytes did not present statistical difference on the different materials, in TV1 and TV3 times of culture. Their growth rate increased on all materials, being more expressive in steel; the fibroblasts did not present statistical difference on the different materials, in TV2 and TV3 times of culture. The growth rate of these decreased on all materials, being more expressive in PEEK. The morphology analyses show increase in cell numbers, adequate spreading, and adhesion at all cultivation times (TM1, TM2, and TM3) in both cell lines, on all materials. CONCLUSION: All materials tested are suitable for use in the manufacture of prosthetic components for implant-supported rehabilitations, considering the limitations of this study. CLINICAL SIGNIFICANCE: This work analyzes the cellular response of cells present in the human gingiva, as a way to simulate the peri-implant tissue response around novel angular prosthetic components made of stainless steel and PEEK.

Fimepinostat (CUDC-907) in patients with relapsed/refractory diffuse large B cell and high-grade B-cell lymphoma: report of a phase 2 trial and exploratory biomarker analyses.

Fimepinostat (CUDC-907), a first-in-class oral small-molecule inhibitor of histone deacetylase and phosphatidylinositol 3-kinase, demonstrated efficacy in a phase 1 study of patients with relapsed/refractory (R/R) diffuse large and high-grade B-cell lymphomas (DLBCL/HGBL), particularly those with increased MYC protein expression and/or MYC gene rearrangement/copy number gain (MYC-altered disease). Therefore, a phase 2 study of fimepinostat was conducted in this patient population with 66 eligible patients treated. The primary end-point of overall response (OR) rate for patients with MYC-IHC ≥40% (n = 46) was 15%. Subsequently, exploratory pooled analyses were performed including patients treated on both the phase 1 and 2 studies based upon the presence of MYC-altered disease as well as a biomarker identified by Virtual Inference of Protein activity by Enriched Regulon analysis (VIPER). For these patients with MYC-altered disease (n = 63), the overall response (OR) rate was 22% with seven responding patients remaining on treatment for approximately two years or longer, and VIPER yielded a three-protein biomarker classification with positive and negative predictive values of ≥85%. Prolonged durations of response were achieved by patients with MYC-altered R/R DLBCL/HGBL treated with single-agent fimepinostat. Combination therapies and/or biomarker-based patient selection strategies may lead to higher response rates in future clinical trials.

Vectorial theory surpasses the local theory in explaining the origin of P-wave dispersion.

BACKGROUND: Local theory and the vectorial theory are used to explain the origin of P-wave dispersion (PWD). There are no previous studies that analyze both at the same time. OBJECTIVES: We set out to determine the implication of local and vectorial theories in the origin of PWD. METHODS: Cross-sectional study in 153 randomly selected patients aged 18-70 years, undergoing electrophysiological study. Inhomogeneous atrial conduction was evaluated by atrial electrogram dispersion in terms of duration (EGMdurdis) and morphology (EGMmorph dis). P-distal coronary sinus interval (P-DCS) was also measured. P-wave was measured twice, firstly at a calibration of 20 mm/mV and a sweep speed of 50 mm/s, enhancement 10× (basic measurement [BM]), and second time at sweep speed of 150 mm/s, enhancement 80-160× (high precision measurement [HPM]). RESULTS: PWD with BM was 48 ms [36-54 ms] while with HPM it was 4 ms [0-10 ms], p < 0.001. With BM, maximum and minimum P- wave duration presented a moderate correlation (r = 0.342; p < 0.001), using HPM it becomes strong (r = 0.750; p < 0.001). In cases with P-DCS < 80 ms (r = 0.965; p < 0.001), but not with P-DCS ≥ 80 ms (r = 0.649; p < 0.001), the previous correlation became almost perfect with HPM. EGMdurdis and EGMmorphdis were weak but significantly correlated with PWD. This correlation became moderate in patients with P-DCS ≥ 80 ms and disappeared in those with P-DCS, using BM and HPM. CONCLUSION: Vectorial theory explains almost entirely the PWD phenomenon. Inhomogeneous conduction could be an additional mechanism to explain PWD, but its contribution is small.

Influence of abutment angulation on loss of prosthetic abutment torque under mechanical cycling.

STATEMENT OF PROBLEM: Internal conical connections provide mechanical stability for the prosthetic abutment and implant connection. However, some clinical situations require the use of angled prosthetic abutments that may increase stress on supportive implants by difference force vectors under cyclic loading. PURPOSE: The purpose of this in vitro study was to measure the screw loosening values of prosthetic abutments with internal conical connections (indexed and nonindexed) having different angles under mechanical cycling. MATERIAL AND METHODS: Thirty-six implants (4.0×13 mm, Titamax) with internal conical connections and their respective universal prosthetic abutments (n=36, 3.5×3.3 mm) were divided into indexed and nonindexed groups (n=18) with abutment inclinations of 0 (straight), 17, and 30 degrees. An insertion torque of 15 Ncm was applied according to the manufacturer's specifications. The specimens underwent fatigue testing of 500 000 cycles at a frequency of 2 Hz with a dynamic compressive load of 120 N at an angle of 30 degrees. The detorque values were measured by using a digital torque meter and tabulated for statistical analyses. RESULTS: The specimens with indexed abutments had mean ±standard deviation detorque values of 6.72 ±2.29 Ncm under mechanical cycling, whereas those with nonindexed abutments had values of 8.98 ±1.84 Ncm. In the indexed group, the lowest detorque value was observed for abutments at 30 degrees compared with the straight group (P<.05). As for nonindexed abutments, similar detorque values were observed after increasing the abutment inclination (P>.05). CONCLUSIONS: A decrease in detorque values in the indexed abutments related to their inclination was found under mechanical cycling, whereas the prosthetic abutments with 30 degrees of angulation had the lowest values. No decrease was found in the nonindexed abutments.

New Parameter of the Second Half of the P-Wave, P-Wave Duration, and Atrial Conduction Times Predict Atrial Fibrillation during Electrophysiological Studies.

OBJECTIVE: Several P-wave parameters reflect atrial conduction characteristics and have been used to predict atrial fibrillation (AF). The aim of this study was to determine the relationship between maximum P-wave duration (PMax) and new P-wave parameters, with atrial conduction times (CT), and to assess their predictive value of AF during electrophysiological studies (AF-EPS). SUBJECTS AND METHODS: This was a cross-sectional study in 153 randomly selected patients aged 18-70 years, undergoing EPS. The patients were divided into 2 groups designated as no AF-EPS and AF-EPS, depending on whether AF occurred during EPS or not. Different P-wave parameters and atrial CT were compared for both study groups. Subsequently, the predictive value of the P-wave parameters and the atrial CT for AF-EPS was evaluated. RESULTS: The values of CT, PMax, and maximum Ppeak-Pend interval (Pp-eMax) were significantly higher in patients with AF-EPS. Almost all P-wave parameters were correlated with the left CT. PMax, Pp-eMax, and CT were univariate and multivariate predictors of AF-EPS. The largest ROC area was presented by interatrial CT (0.852; p < 0.001; cutoff value: ≥82.5 ms; sensitivity: 91.1%; specificity: 81.1%). Pp-eMax showed greater sensitivity (79.5%) to discriminate AF-EPS than PMax (72.7%), but the latter had better specificity (60.4% vs. 41.5%). CONCLUSIONS: Left atrial CT were directly and significantly correlated with PMax and almost all the parameters of the second half of the P-wave. CT, PMax, and Pp-eMax (new parameter) were good predictors of AF-EPS, although CT did more robustly.

Effect of sodium ascorbyl phosphate on osteoblast viability and differentiation.

OBJECTIVES AND BACKGROUND: Sodium ascorbyl phosphate (SAP) is a hydrophilic and stable L-ascorbic acid derivative, being converted by the cell phosphatases into free ascorbic acid (AA), which allows its sustained release in the medium. AA participates in the maintenance and healing of the periodontium. It presents a regulatory role of the osteoblastic activity, stimulating the deposition of collagen extracellular matrix followed by the induction of genes associated with the osteoblastic phenotype. It also acts in the elimination of reactive oxygen species, abundantly produced by defense cells in periodontal disease. The aim of this study was to evaluate the effect of SAP on osteoblast viability and differentiation. METHODS: Mouse preosteoblastic cells of the MC3T3-E1 strain were used. Cell viability was assessed by the trypan blue dye exclusion assay and the expression of genes related to osteoblast differentiation by quantitative PCR. Collagen I secretion was evaluated by ELISA, and mineralized matrix formation was assayed by Alizarin red S staining. RESULTS: The results showed that SAP at concentrations from 50 to 500 µmol/L does not influence preosteoblast cell viability, but stimulates their differentiation, observed by the induction of RUNX2, COL1A1, and BGLAP2; by the higher secreted levels of collagen I; and also by the increase in the mineralization of the extracellular matrix in cells exposed to this agent at 200 or 400 µmol/L, compared with those not exposed. CONCLUSION: By its stability and capacity to induce preosteoblastic cell differentiation, our results indicate that the incorporation of SAP into local release devices, membranes/scaffolds or biomaterials, could favor bone tissue formation and therefore periodontal healing.

Microvesicles derived from squamous cell carcinoma induce cell death, autophagy, and invasion of benign myoepithelial cells.

BACKGROUND: There has been great interest recently in the mechanisms of cell-to-cell communication through microvesicles (MV). These structures are produced by many different cell types and can modulate cellular activity by induction of epigenetic alterations. These vesicles may promote tumor mass increase either by stimulating cell proliferation via growth factors or by inhibiting apoptosis, which reinforces the role of such vesicles as important modulators of tumor progression. METHODS: The present in vitro study aimed to characterize MV derived from malignant neoplastic epithelial cell cultures (EP) and their effect on the expression of apoptosis/autophagy and invasion related genes of benign myoepithelial (Myo) cell cultures. RESULTS: The results revealed round structures with a mean size of 153.6 (±0.2) nm, with typical MV morphology. CD63 quantification indicated that EP cell culture at 70%-80% confluence secreted 3.088 × 108 MV/mL. Overall, Myo exposed to MVs derived from EP showed both up- and downregulation of tumorigenesis promoting genes. MVs from EP cells promoted cell death of Myo cells and positively modulate BAX, SURVIVIN, LC3B, MMP-2, and MMP-9 expression. Furthermore, an increasing of MMP-2 and MMP-9 secretion by Myo was observed after MV exposure. CONCLUSIONS: These findings suggest that MVs from EP modulate autophagy of Myo cells, which may, in part, explain the disappearance of these cells in in situ areas of invasive carcinoma ex-pleomorphic adenoma. Additionally, the overexpression of MMPs contributes to the development of an invasive phenotype of Myo cells, which could favor the dissolution of the basement membrane during tumorigenesis process.