CO2-Driven N-Formylation/N-Methylation of Amines Using C-Scorpionate Metal Complexes.

C-scorpionate metal complexes, specifically, [NiCl2(tpm)]·3H2O, [CoCl2(tpm)]·3H2O and [PdCl2(tpm)] [tpm = hydrotris(1H-pyrazol-1-yl)methane], were effective in the N-formylation and N-methylation of amines using carbon dioxide, as carbon source, in the presence of sodium borohydride. Various parameters were studied, including reaction time, temperature, solvent volume, presence of additives, and catalyst amount. These parameters were found to have a significant impact on the selectivity of the product. [NiCl2(tpm)]·3H2O exhibited good conversion at 80 °C, but its selectivity towards formamide decreased with prolonged reaction time. Increasing the amount of [NiCl2(tpm)]·3H2O, the selectivity changed. [PdCl2(tpm)] showed different selectivity compared to [NiCl2(tpm)]·3H2O, while [CoCl2(tpm)]·3H2O presented poor results. Monitoring the reaction course by 1H NMR revealed the presence of an intermediate species that influenced product formation. These results highlight the versatility and catalytic potential of C-scorpionate metal complexes in the N-formylation/N-methylation of amines in the catalytic system (NaBH4/MeCN/CO2).

Correction: The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides.

Correction for 'The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides' by Girolamo Casella et al., Phys. Chem. Chem. Phys., 2023, https://doi.org/10.1039/d3cp02024j.

The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides.

We have investigated using DFT methods the reaction mechanism of the Radzisewski reaction to obtain an amide via the reaction of ACN and H2O2 under alkaline conditions. The direct reaction between ACN and H2O2 showed a quite high activation energy (about 45 kcal mol-1) rendering this path unreliable. Instead, a fast reaction between ACN and HOO- forming the deprotonated species (PAIA-) of the peroxyacetimidic acid (PAIA) was observed. From this, PAIA- was guessed to form PAIA through a fast reaction of hydrolysis. Moreover, a second way of formation of PAIA, through an OH- catalyzed path, made the rate determining step (RDS) in very good agreement with experimental data, hence neglecting the contribution of the kinetically favored hydrolysis of PAIA-. This discrepancy was reconciled by considering that the final amide was obtained through a regioselective path forming the PAIA and the further reaction involving the decomposition of PAIA and PAIA-. Indeed, the PAIA obtained from the hydrolysis reaction showed a configuration which did not match the configurational behavior required. Conversely, the PAIA formed from the RDS path matched the required configuration needed to obtain the amide. Our findings also disentangled the experimenal debate on the assignment of the RDS.

p-Xylene Oxidation to Terephthalic Acid: New Trends.

Large-scale terephthalic acid production from the oxidation of p-xylene is an especially important process in the polyester industry, as it is mainly used in polyethylene terephthalate (PET) manufacturing, a polymer that is widely used in fibers, films, and plastic products. This review presents and discusses catalytic advances and new trends in terephthalic acid production (since 2014), innovations in terephthalic acid purification processes, and simulations of reactors and reaction mechanisms.

Exploring the Mechanisms behind the Anti-Tumoral Effects of Model C-Scorpionate Complexes.

The growing worldwide cancer incidence, coupled to the increasing occurrence of multidrug cancer resistance, requires a continuous effort towards the identification of new leads for cancer management. In this work, two C-scorpionate complexes, [FeCl2(κ3-Tpm)] (1) and [Co(κ3-TpmOH)2](NO3)2 (2), (Tpm = hydrotris(pyrazol-1-yl)methane and TpmOH = 2,2,2-tris(pyrazol-1-yl)ethanol), were studied as potential scaffolds for future anticancer drug development. Their cytotoxicity and cell migration inhibitory activity were analyzed, and an untargeted metabolomics approach was employed to elucidate the biological processes significantly affected by these two complexes, using two tumoral cell lines (B16 and HCT116) and a non-tumoral cell line (HaCaT). While [FeCl2(κ3-Tpm)] did not display a significant cytotoxicity, [Co(κ3-TpmOH)2](NO3)2 was particularly cytotoxic against the HCT116 cell line. While [Co(κ3-TpmOH)2](NO3)2 significantly inhibited cell migration in all tested cell lines, [FeCl2(κ3-Tpm)] displayed a mixed activity. From a metabolomics perspective, exposure to [FeCl2(κ3-Tpm)] was associated with changes in various metabolic pathways involving tyrosine, where iron-dependent enzymes are particularly relevant. On the other hand, [Co(κ3-TpmOH)2](NO3)2 was associated with dysregulation of cell adhesion and membrane structural pathways, suggesting that its antiproliferative and anti-migration properties could be due to changes in the overall cellular adhesion mechanisms.

Glycerol Valorization-The Role of Biochar Catalysts.

The conversion of renewable feedstocks into new added-value products is a current hot topic that includes the biodiesel industry. When converting vegetable oils into biodiesel, approximately 10% of glycerol byproduct is produced. Glycerol can be envisaged as a chemical platform due to its chemical versatility, as a scaffold or building block, in producing a wide range of added-value chemicals. Thus, the development of sustainable routes to obtain glycerol-based products is crucial and urgent. This certainly encompasses the use of raw carbonaceous materials from biomass as heterogeneous acid catalysts. Moreover, the integration of surface functional groups, such as sulfonic acid, in carbon-based solid materials, makes them low cost, exhibiting high catalytic activity with concomitant stability. This review summarizes the work developed by the scientific community, during the last 10 years, on the use of biochar catalysts for glycerol transformation.

Selective Styrene Oxidation to Benzaldehyde over Recently Developed Heterogeneous Catalysts.

The selective oxidation of styrene under heterogeneous catalyzed conditions delivers environmentally friendly paths for the production of benzaldehyde, an important intermediate for the synthesis of several products. The present review explores heterogeneous catalysts for styrene oxidation using a variety of metal catalysts over the last decade. The use of several classes of supports is discussed, including metal-organic frameworks, zeolites, carbon materials and silicas, among others. The studied catalytic systems propose as most used oxidants tert-butyl hydroperoxide, and hydrogen peroxide and mild reaction conditions. The reaction mechanism proceeds through the generation of an intermediate reactive metal-oxygen species by catalyst-oxidant interactions. Overall, most of the studies highlight the synergetic effects among the metal and support for the activity and selectivity enhancement.

Efficient and Reusable Iron Catalyst to Convert CO2 into Valuable Cyclic Carbonates.

The production of cyclic carbonates from CO2 cycloaddition to epoxides, using the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz = 1H-pyrazol-1-yl) as a catalyst, is achieved in excellent yields (up to 98%) in a tailor-made ionic liquid (IL) medium under mild conditions (80 °C; 1-8 bar). A favorable synergistic catalytic effect was found in the [FeCl2{κ3-HC(pz)3}]/IL system. Notably, in addition to exhibiting remarkable activity, the catalyst is stable during ten consecutive cycles, the first decrease (11%) on the cyclic carbonate yield being observed during the 11th cycle. The use of C-scorpionate complexes in ionic liquids to afford cyclic carbonates is presented herein for the first time.

Spectroelectrochemical Properties and Catalytic Activity in Cyclohexane Oxidation of the Hybrid Zr/Hf-Phthalocyaninate-Capped Nickel(II) and Iron(II) tris-Pyridineoximates and Their Precursors.

The in situ spectroelectrochemical cyclic voltammetric studies of the antimony-monocapped nickel(II) and iron(II) tris-pyridineoximates with a labile triethylantimony cross-linking group and Zr(IV)/Hf(IV) phthalocyaninate complexes were performed in order to understand the nature of the redox events in the molecules of heterodinuclear zirconium(IV) and hafnium(IV) phthalocyaninate-capped derivatives. Electronic structures of their 1e-oxidized and 1e-electron-reduced forms were experimentally studied by electron paramagnetic resonance (EPR) spectroscopy and UV-vis-near-IR spectroelectrochemical experiments and supported by density functional theory (DFT) calculations. The investigated hybrid molecular systems that combine a transition metal (pseudo)clathrochelate and a Zr/Hf-phthalocyaninate moiety exhibit quite rich redox activity both in the cathodic and in the anodic region. These binuclear compounds and their precursors were tested as potential catalysts in oxidation reactions of cyclohexane and the results are discussed.

Nickel(II), Copper(II) and Palladium(II) Complexes with Bis-Semicarbazide Hexaazamacrocycles: Redox-Noninnocent Behavior and Catalytic Activity in Oxidation and C-C Coupling Reactions.

Nickel(II), copper(II), and palladium(II) complexes MLH, where M = Ni (1), Cu (2), Pd (3), and MLOMe, where M = Ni (4), Cu (5), Pd (6), have been prepared by reactions of NiCl2·6H2O, Cu(OAc)2·H2O, and PdCl2(MeCN)2 with 14-membered bis-semicarbazide hexaazamacrocycles H2LH and H2LOMe in dimethylformamide (DMF). The compounds were characterized by elemental analysis, ESI mass spectrometry, IR, UV-vis, and 1D (1H, 13C) and 2D (1H-1H COSY, 1H-1H TOCSY, 1H-1H NOESY, 1H-13C HSQC, 1H-13C HMBC) NMR spectra (1, 3, 4, and 6), and X-ray diffraction (2, 4-6). The complexes with MIIN4 coordination environment have S = 0, 1/2, 0 ground states for Ni, Cu, and Pd, respectively. The electrochemical behavior of 1-6 was investigated in detail. The electronic structures of 1e-oxidized species were studied by EPR, UV-vis-NIR spectroelectrochemistry, and DFT calculations, indicating the redox-noninnocent behavior of the ligands. Compounds 1-6 were tested in the oxidation of styrene and C-C coupling (Henry and Knoevenagel condensations). Compounds 2 and 5 selectively catalyze the microwave-assisted oxidation of neat styrene to benzaldehyde (up to 88% yield), whereas the 1 and 4 catalytic systems afforded up to 99% ß-nitroethanol yield with an appreciable diastereoselectivity toward the formation of the anti isomer.

Aroylhydrazone Schiff Base Derived Cu(II) and V(V) Complexes: Efficient Catalysts towards Neat Microwave-Assisted Oxidation of Alcohols.

A new hexa-nuclear Cu(II) complex [Cu3(µ2-1κNO2,2κNO2-L)(µ-Cl)2(Cl)(MeOH)(DMF)2]2 (1), where H4L = N'1,N'2-bis(2-hydroxybenzylidene)oxalohydrazide, was synthesized and fully characterized by IR spectroscopy, ESI-MS, elemental analysis, and single crystal X-ray diffraction. Complex 1 and the dinuclear oxidovanadium(V) one [{VO(OEt)(EtOH)}2(1κNO2,2κNO2-L)]·2H2O (2) were used as catalyst precursors for the neat oxidation of primary (cinnamyl alcohol) and secondary (1-phenyl ethanol, benzhydrol) benzyl alcohols and of the secondary aliphatic alcohol cyclohexanol, under microwave irradiation using tert-butyl hydroperoxide (TBHP) as oxidant. Oxidations proceed via radical mechanisms. The copper(II) compound 1 exhibited higher catalytic activity than the vanadium(V) complex 2 for all the tested alcohol substrates. The highest conversion was found for 1-phenylethanol, yielding 95.3% of acetophenone in the presence of 1 and in solvent and promoter-free conditions. This new Cu(II) complex was found to exhibit higher activity under milder reaction conditions than the reported aroylhydrazone Cu(II) analogues.

New Trends in C-C Cross-Coupling Reactions: The Use of Unconventional Conditions.

The ever-growing interest in the cross-coupling reaction and its applications has increased exponentially in the last decade, owing to its efficiency and effectiveness. Transition metal-mediated cross-couplings reactions, such as Suzuki-Miyaura, Sonogashira, Heck, and others, are powerful tools for carbon-carbon bond formations and have become truly fundamental routes in catalysis, among other fields. Various greener strategies have emerged in recent years, given the widespread popularity of these important reactions. The present review comprises literature from 2015 onward covering the implementation of unconventional methodologies in carbon-carbon (C-C) cross-coupling reactions that embodies a variety of strategies, from the use of alternative energy sources to solvent- free and green media protocols.

Recent Advances in Copper Catalyzed Alcohol Oxidation in Homogeneous Medium.

The development of sustainable processes and products through innovative catalytic materials and procedures that allow a better use of resources is undoubtedly one of the most significant issues facing researchers nowadays. Environmental and economically advanced catalytic processes for selective oxidation of alcohols are currently focused on designing new catalysts able to activate green oxidants (dioxygen or peroxides) and applying unconventional conditions of sustainable significance, like the use of microwave irradiation as an alternative energy source. This short review aims to provide an overview of the recently (2015-2020) discovered homogeneous aerobic and peroxidative oxidations of primary and secondary alcohols catalyzed by copper complexes, highlighting new catalysts with potential application in sustainable organic synthesis, with significance in academia and industry.

Selective Oxidation of Ethane to Acetic Acid Catalyzed by a C-Scorpionate Iron(II) Complex: A Homogeneous vs. Heterogeneous Comparison.

The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe3O4/TiO2/[FeCl2{κ3-HC(pz)3}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the "greeness" of the new ethane oxidation procedure.

Application of Ionic Liquids in Electrochemistry-Recent Advances.

In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.

Zn(II)-to-Cu(II) Transmetalation in an Amide Functionalized Complex and Catalytic Applications in Styrene Oxidation and Nitroaldol Coupling.

The mononuclear zinc(II) complex cis-[ZnL2(H2O)2] (1; L = 4-(pyridin-3-ylcarbamoyl)benzoate) was synthesized and characterized. By soaking crystals of 1 in a mixture of DMF-H2O solution containing a slight excess of Cu(NO3)2 × 3H2O a transmetalation reaction occurred affording the related copper(II) complex trans-[CuL2(H2O)2] (2). The structures of the compounds were authenticated by single crystal X-ray diffraction revealing, apart from a change in the isomerism, an alteration in the relative orientation of the chelating carboxylate groups and of the pyridine moieties. H-bond interactions stabilize both geometries and expand them into two-dimensional (2D) networks. The transmetalation was confirmed by SEM-EDS analysis. Moreover, the thermodynamic feasibility of the transmetalation is demonstrated by density-functional theory (DFT) studies. The catalytic activities of 1 and 2 for the oxidation of styrene and for the nitroaldol (Henry) C-C coupling reaction were investigated. The copper(II) compound 2 acts as heterogeneous catalyst for the microwave-assisted oxidation of styrene with aqueous hydrogen peroxide, yielding selectively (>99%) benzaldehyde up to 66% of conversion and with a turnover frequency (TOF) of 132 h-1. The zinc(II) complex 1 is the most active catalyst (up to 87% yield) towards the nitroaldol (Henry) coupling reaction between benzaldehyde and nitro-methane or -ethane to afford the corresponding ß-nitro alcohols. The reaction of benzaldehyde with nitroethane in the presence of 1 produced 2-nitro-1-phenylpropanol in the syn and the anti diastereoisomeric forms, with a considerable higher selectivity towards the former (66:34).

Nickel(II) Complexes with Redox Noninnocent Octaazamacrocycles as Catalysts in Oxidation Reactions.

Nickel(II) complexes with 15-membered (1-5) and 14-membered (6) octaazamacrocyclic ligands derived from 1,2- and 1,3-diketones and S-methylisothiocarbohydrazide were prepared by template synthesis. The compounds were characterized by elemental analysis, electrospray ionization mass spectrometry, IR, UV-vis, 1H NMR spectroscopies, and X-ray diffraction. The complexes contain a low-spin nickel(II) ion in a square-planar coordination environment. The electrochemical behavior of 1-6 was investigated in detail, and the electronic structure of 1e-oxidized and 1e-reduced species was studied by electron paramagnetic resonance, UV-vis-near-IR spectroelectrochemistry, and density functional theory calculations indicating redox noninnocent behavior of the ligands. Compounds 1-6 were tested in the microwave-assisted solvent-free oxidation of cyclohexane by tert-butyl hydroperoxide to produce the industrially significant mixture of cyclohexanol and cyclohexanone (i.e., A/K oil). The results showed that the catalytic activity was affected by several factors, namely, reaction time and temperature or amount and type of catalyst. The best values for A/K oil yield (23%, turnover number of 1.1 × 102) were obtained with compound 6 after 2 h of microwave irradiation at 100 °C.

Catalytic Activity of Polynuclear vs. Dinuclear Aroylhydrazone Cu(II) Complexes in Microwave-Assisted Oxidation of Neat Aliphatic and Aromatic Hydrocarbons.

One-dimensional (1D) polynuclear Cu(II) complex (1) derived from (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L) is synthesized and characterized by elemental analysis, IR spectroscopy, ESI-MS, and single crystal X-ray crystallography. Its catalytic performance towards the solvent-free microwave-assisted peroxidative oxidation of aliphatic and aromatic hydrocarbons under mild conditions is compared with that of dinuclear Cu(II) complexes (2 and 3) of the same ligand, previously reported as antiproliferative agents. Polymer 1 exhibits the highest activity, either for the oxidation of cyclohexane (leading to overall yields, based on the alkane, of up to 39% of cyclohexanol and cyclohexanone) or towards the oxidation of toluene (selectively affording benzaldehyde up to a 44% yield), after 2 or 2.5 h of irradiation at 80 or 50 °C, respectively.

Novel Methinic Functionalized and Dendritic C-Scorpionates.

The study of chelating ligands is undoubtedly one of the most significant fields of research in chemistry. The present work is directed to the synthesis of new functionalized derivatives of tripodal C-scorpionate compounds. Tris-2,2,2-(1-pyrazolyl)ethanol, HOCH2C(pz)3 (1), one of the most important derivatives of hydrotris(pyrazolyl)methane, was used as a building block for the synthesis of new functionalized C-scorpionates, aiming to expand the scope of this unexplored class of compounds. The first dendritic C-scorpionate was successfully prepared and used in the important industrial catalytic reactions, Sonogashira and Heck C-C cross-couplings.

Metal Azolate/Carboxylate Frameworks as Catalysts in Oxidative and C-C Coupling Reactions.

The five metal azolate/carboxylate (MAC) compounds [Cd(dmpzc)(DMF)(H2O)] (Cd-dmpzc), [Pd(H2dmpzc)2Cl2] (Pd-dmpzc), [Cu(Hdmpzc)2] (Cu-dmpzc), [Zn4O(dmpzc)3]·Solv (Zn-dmpzc·S), and [Co4O(dmpzc)3]·Solv (Co-dmpzc·S) were isolated by coupling 3,5-dimethyl-1H-pyrazol-4-carboxylic acid (H2dmpzc) to cadmium(II), palladium(II), copper(II), zinc(II), and cobalt(II) salts. While Cd-dmpzc and Pd-dmpzc had never been prepared in the past, for Cu-dmpzc, Zn-dmpzc·S, and Co-dmpzc·S we optimized alternative synthetic paths that, in the case of the copper(II) and cobalt(II) derivatives, are faster and grant higher yields than the previously reported ones. The crystal structure details were determined ab initio (Cd-dmpzc and Pd-dmpzc) or refined (Cu-dmpzc, Zn-dmpzc·S, and Co-dmpzc·S) by means of powder X-ray diffraction (PXRD). While Cd-dmpzc is a nonporous 3D MAC framework, Pd-dmpzc shows a 3D hybrid coordination/hydrogen-bonded network, in which Pd(H2dmpzc)2Cl2 monomers are present. The thermal behavior of the five MAC compounds was investigated by coupling thermal analysis to variable-temperature PXRD. Their catalytic activity was assessed in oxidative and C-C coupling reactions, with the copper(II) and cadmium(II) derivatives being the first nonporous MAC frameworks to be tested as catalysts. Cu-dmpzc is the most active catalyst in the partial oxidation of cyclohexane by tert-butyl hydroperoxide in acetonitrile (yields up to 12% after 9 h) and is remarkably active in the solvent-free microwave-assisted oxidation of 1-phenylethanol to acetophenone (yields up to 99% at 120 °C in only 0.5 h). On the other hand, activated Zn-dmpzc·S (Zn-dmpzc) is the most active catalyst in the Henry C-C coupling reaction of aromatic aldehydes with nitroethane, showing appreciable diastereoselectivity toward the syn-nitroalkanol isomer (syn:anti selectivity up to 79:21).