Metal-cavity quantum-dot lasers with enhanced thermal performance.

We designed, fabricated, and characterized thermal performances of Fabry-Pérot quantum-dot lasers with both metal-coated and conventional dielectric waveguides. With proper design, metals, such as Ag, Au, Cu, and Al can function as a low loss waveguide wall as well as an efficient heat remover. Metal-cavity waveguide lasers showed excellent threshold and characteristic temperature working above 120 °C, while dielectric waveguide lasers ceased operation near 80 °C under the same conditions. The thermal analysis of these lasers showed that metal-cavity lasers have approximately 1.5 times higher thermal conductivity compared with those of the dielectric lasers. We believe that the metal-coating of waveguides and the proper selection of metal efficiently remove the heat from the active region and enable stable lasing operation at high temperature.

Electrically tunable slow and fast lights in a quantum-dot semiconductor optical amplifier near 1.55 microm.

We have demonstrated both slow light in the absorption regime and fast light in the gain regime of a 1.55 microm quantum-dot semiconductor optical amplifier at room temperature. The theory with coherent population oscillations and four-wave mixing effects agrees well with the experimental results. We have observed a larger phase delay at the excited state than that at the ground state transition, likely due to the higher gain and smaller saturation power of the excited state.