In Vitro and In Vivo Safety of Hyaluronic Acid-Decorated Microparticles for Intravitreal Injection of Palmitoylethanolamide, Citicoline, or Glial-Cell-Derived Neurotrophic Factor.

The treatment of posterior eye segment diseases through intravitreal injection requires repeated injections of an active molecule, which may be associated with serious side effects and poor patient compliance. One brilliant strategy to overcome these issues is the use of drug-loaded microparticles for sustained release, aiming at reducing the frequency of injections. Therefore, the aim of this work was to assess the safety features of poly(lactic-co-glycolic acid) (PLGA)-based, hyaluronic acid-decorated microparticles loaded with palmitoylethanolamide (PEA), citicoline (CIT), or glial-cell-derived neurotrophic factor (GDNF). Microparticles were prepared by double emulsion-solvent evaporation and fully characterized for their technological features. Microparticles possessed a satisfactory safety profile in vitro on human retinal pigment epithelial (ARPE-19) cells. Interestingly, the administration of free GDNF led to a loss of cell viability, while GDNF sustained release displayed a positive effect in that regard. In vivo results confirmed the safety profile of both empty and loaded microparticles. Overall, the outcomes suggest that the produced microparticles are promising for improving the local administration of neuroprotective molecules. Further studies will be devoted to assess the therapeutic ability of microparticles.

Investigating the Effect of Surface Hydrophilicity on the Destiny of PLGA-Poloxamer Nanoparticles in an In Vivo Animal Model.

This study aimed to examine the impact of different surface properties of poly(lactic-co-glycolic) acid (PLGA) nanoparticles (P NPs) and PLGA-Poloxamer nanoparticles (PP NPs) on their in vivo biodistribution. For this purpose, NPs were formulated via nanoprecipitation and loaded with diphenylhexatriene (DPH), a fluorescent dye. The obtained NPs underwent comprehensive characterization, encompassing their morphology, technological attributes, DPH release rate, and thermodynamic properties. The produced NPs were then administered to wild-type mice via intraperitoneal injection, and, at scheduled time intervals, the animals were euthanized. Blood samples, as well as the liver, lungs, and kidneys, were extracted for histological examination and biodistribution analysis. The findings of this investigation revealed that the presence of poloxamers led to smaller NP sizes and induced partial crystallinity in the NPs. The biodistribution and histological results from in vivo experiments evidenced that both, P and PP NPs, exhibited comparable concentrations in the bloodstream, while P NPs could not be detected in the other organs examined. Conversely, PP NPs were primarily sequestered by the lungs and, to a lesser extent, by the kidneys. Future research endeavors will focus on investigating the behavior of drug-loaded NPs in pathological animal models.

Physico-Chemical Properties and Valorization of Biopolymers Derived from Food Processing Waste.

The widespread use of synthetic plastics, as well as the waste produced at the end of their life cycle, poses serious environmental issues. In this context, bio-based plastics, i.e., natural polymers produced from renewable resources, represent a promising alternative to petroleum-based materials. One potential source of biopolymers is waste from the food industry, the use of which also provides a sustainable and eco-friendly solution to waste management. Thus, the aim of this work concerns the extraction of polysaccharide fractions from lemon, tomato and fennel waste. Characterizing the chemical-physical and thermodynamic properties of these polysaccharides is an essential step in evaluating their potential applications. Hence, the solubility of the extracted polysaccharides in different solvents, including water and organic solvents, was determined since it is an important parameter that determines their properties and applications. Also, acid-base titration was carried out, along with thermoanalytical tests through differential scanning calorimetry. Finally, the electrospinning of waste polysaccharides was investigated to explore the feasibility of obtaining polysaccharide-based membranes. Indeed, electrospun fibers are a promising structure/system via which it is possible to apply waste polysaccharides in packaging or well-being applications. Thanks to processing feasibility, it is possible to electrospin waste polysaccharides by combining them with different materials to obtain porous 3D membranes made of nanosized fibers.

Characterization of Hyaluronic Acid-Coated PLGA Nanoparticles by Surface-Enhanced Raman Spectroscopy.

Nanoparticles (NPs) coated with hyaluronic acid (HA) seem to be increasingly promising for targeted therapy due to HA chemical versatility, which allows them to bind drugs of different natures, and their affinity with the transmembrane receptor CD-44, overexpressed in tumor cells. However, an essential aspect for clinical use of NPs is formulation stability over time. For these reasons, analytical techniques capable of characterizing their physico-chemical properties are needed. In this work, poly(lactide-co-glycolide) (PLGA) NPs with an average diameter of 100-150 nm, coated with a few 10 s of nm of HA, were synthesized. For stability characterization, two complementary investigative techniques were used: Dynamic Light Scattering (DLS) and Surface-Enhanced Raman Scattering (SERS) spectroscopy. The first technique provided information on size, polidispersity index, and zeta-potential, and the second provided a deeper insight on the NP surface chemicals, allowing distinguishing of HA-coated NPs from uncoated ones. Furthermore, in order to estimate formulation stability over time, NPs were measured and monitored for two weeks. SERS results showed a progressive decrease in the signal associated with HA, which, however, is not detectable by the DLS measurements.

A novel ß-hairpin peptide derived from the ARC repressor selectively interacts with the major groove of B-DNA.

Transcription factors (TFs) have a remarkable role in the homeostasis of the organisms and there is a growing interest in how they recognize and interact with specific DNA sequences. TFs recognize DNA using a variety of structural motifs. Among those, the ribbon-helix-helix (RHH) proteins, exemplified by the MetJ and ARC repressors, form dimers that insert antiparallel ß-sheets into the major groove of DNA. A great chemical challenge consists of using the principles of DNA recognition by TFs to design minimized peptides that maintain the DNA affinity and specificity characteristics of the natural counterparts. In this context, a peptide mimic of an antiparallel ß-sheet is very attractive since it can be obtained by a single peptide chain folding in a ß-hairpin structure and can be as short as 14 amino acids or less. Herein, we designed eight linear and two cyclic dodeca-peptides endowed with ß-hairpins. Their DNA binding properties have been investigated using fluorescence spectroscopy together with the conformational analysis through circular dichroism and solution NMR. We found that one of our peptides, peptide 6, is able to bind DNA, albeit without sequence selectivity. Notably, it shows a topological selectivity for the major groove of the DNA which is the interaction site of ARC and many other DNA-binding proteins. Moreover, we found that a type I' ß-hairpin folding pattern is a favorite peptide structure for interaction with the B-DNA major groove. Peptide 6 is a valuable lead compound for the development of novel analogs with sequence selectivity.

Combination therapy for the treatment of pancreatic cancer through hyaluronic acid-decorated nanoparticles loaded with quercetin and gemcitabine: A preliminary in vitro study.

Combination chemotherapy by means of two or more drugs is prone to suppressing or discouraging the inception of multidrug resistance, exploiting the fact that diverse drugs act in different points of the cellular cycle of amplifying tumor cells. For example, the combination of gemcitabine (GMC) with quercetin (QCT) showed a synergistic effect in inhibiting the migration of pancreatic cancer cells. Consequently, herein GMC and QCT have been loaded within biodegradable nanoparticles (NPs) based on poly(lactic-co-glycolic acid), externally decorated with hyaluronic acid (HA; viz., PPHA NPs), which plays a major role in drug targeting to tumors due to its ability to specifically interact with CD44 receptor, that is overexpressed in many tumors. The produced HA-decorated NPs loaded with GMC and QCT showed an improved cytotoxicity and cellular uptake toward two cell lines of pancreatic ductal adenocarcinoma, namely Mia-PaCa-2 and PANC-1, compared with both the bare drugs and the drugs loaded in NPs which do not expose HA on the surface. HA-decorated NPs were also able to improve the anti-inflammatory properties of QCT, therefore leading to a decrease of interleukin cellular levels in both cell lines, preliminarily stimulated with lipopolysaccharides. This result is of special interest also considering the crucial role of interleukins in progression, metastatic processes, and drug resistance of human pancreas cancer cells.

Nanocarriers to Enhance the Accumulation of Vitamin K1 into the Skin.

PURPOSE: Vitamin K1 (VK1) is a molecule abundant in some species of leaf vegetables with beneficial effects in humans following administration on the skin. This work investigates the possibility to use formulations based on lipid vesicles, namely liposomes, transfersomes and ethosomes, suitable to be administered on the skin by nebulization and alternative to fat semisolid preparations present on the market. METHODS: Lipid vesicles encapsulating VK1 were prepared and characterized. Ex-vivo experiments on Franz cells were carried out to study the VK1 accumulation/permeation in/through the skin. Vesicles interaction with the skin was investigated by confocal laser scanning microscopy (CLSM) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. RESULTS: All developed carriers were stable following long-term storage and were not altered following nebulization. In ex-vivo experiments, vesicles with the highest deformability index, namely transfersomes and ethosomes, led to an enhanced VK1 accumulation/permeation into/through the skin. Interestingly, the nebulization of the vesicles led to a further increase of VK1 accumulation into the skin. CONCLUSIONS: In conclusion, to achieve a local effect of VK1 on the skin, the topical nebulization of VK1-containing transfersomes could offer a good compromise between a high VK1 penetration into the skin and a limited permeation through it.

Stimuli-responsive chitosan/poly (N-isopropylacrylamide) semi-interpenetrating polymer networks: effect of pH and temperature on their rheological and swelling properties.

The aim of this work was to synthesize semi-interpenetrating polymer networks (semi-IPNs) by free radical polymerization of N-isopropylacrylamide [poly (NIPAAm)], in the presence of chitosan (CHI), and to study the effect of pH and temperature changes on their rheological and swelling properties. The semi-IPNs are thermally stable up to about 400 °C and the presence of CHI increases the thermal degradation rate compared to bare poly (NIPAAm). The prepared systems presents a well-defined porosity and proved to be non-toxic, in vitro, on human embryonic skin fibroblast, thus offering appropriate support for cell proliferation. The semi-IPNs present, at physiological pH, swelling degrees well below those of the pure poly (NIPAAm). Differently, at acidic pH, the CHI macromolecules are protonated and become much more permeable to the diffusion of water giving a swelling degree that approaches that of bare poly (NIPAAm). The viscoelastic moduli of the semi-IPNs increase as a function of pH while the LCST remain unchanged. Moreover, the semi-IPNs viscoelastic moduli increase with the increase of CHI content and, in particular, the difference between the elastic modulus before and after the sol/gel transition is higher for the semi-IPN than for bare poly (NIPAAm) just at about physiological conditions.

Design of electrospayed non-spherical poly (L-lactide-co-glicolide) microdevices for sustained drug delivery.

Polymer chain entanglements in organic solvents can be considered a key parameter in the formation of non-spherical beads when electrospraying is employed. The shape of micro/nanometric drug delivery systems plays a major role since it can affect circulation, extravasation, distribution and in vivo clearance of the devices. In this frame, we investigated the influence of polymer processing parameters on the design of polylactic-co-glycolic acid non-spherical microdevices loaded with triamcinolone acetonide (TrA), a sparingly water soluble corticosteroid, prepared by electrospraying technique through a one-step process. In particular, we verified that the formation of non-spherical MDs is related to the presence of entanglements among polymer chains to select the optimal solution to be sprayed. The addition of TrA did not substantially affect the particle morphology in terms of size, size distribution and circularity at all the tested drug loadings. Furthermore, the drug could be released for a prolonged period, with controlled and reproducible kinetics for over 3 weeks. The mathematical modeling of release profiles highlighted that the release is mainly driven by degradation, at a higher extent in the case of low drug loading.

Design and characterization of a chitosan physical gel promoting wound healing in mice.

In this study, a sterile and biocompatible chitosan (CHI) gel for wound healing applications was formulated. CHI powder was treated in autoclave (ttCHI) to prepare sterile formulations. The heat treatment modified the CHI molecular weight, as evidenced by GPC analysis, and its physical-chemical features. Differential scanning calorimetry studies indicated that the macromolecules, before and after thermal treatment, differ in the strength of water-polymer interaction leading to different viscoelastic and flow properties. Thermally treated CHI exhibited the following effects: (i) increased the proliferation and migration of human foreskin foetal fibroblasts at 24 h; (ii) accelerated wound healing (measured as area of lesion) at 3 and 10 days in an in vivo model of pressure ulcers. These effects were linked to the increase of the hydroxyproline and haemoglobin content as well as Wnt protein expression. Moreover, we found a reduction of myeloperoxidase activity and TNF-α mRNA expression. These observations suggest the potential of this novel CHI gel in wound healing and other therapeutic applications.

Enhanced antioxidant effect of trans-resveratrol: potential of binary systems with polyethylene glycol and cyclodextrin.

Trans-resveratrol, a polyphenol extracted from Vitis vinifera, has different beneficial effects following its administration on the skin. Here the potential use of binary systems to enhance in vitro and in vivo activity of trans-resveratrol was investigated. Thus the aqueous solubility of trans-resveratrol was investigated in the presence of growing concentrations of polyethylene glycol (PEG) or ß-cyclodextrin (ßCD) as solubilizing excipients. Then, the solid dispersion of trans-resveratrol with PEG or inclusion complexes trans-resveratrol/ßCD were prepared and characterised by different methods. Cytotoxicity and inhibition of reactive oxygen species (ROS) following H2O2 challenge in the presence of trans-resveratrol, alone or associated to the excipients, was evaluated on human keratinocyte HaCaT cell line. Both the trans-resveratrol-containing binary systems induced significant reduction of H2O2-induced ROS production, especially in the case of ßCD that was selected for the following phase of the study. Thus, the effect of a cream containing trans-resveratrol, alone or associated to ßCD, on different skin parameters such as corneometry, colorimetry and elastometry, was evaluated on human volunteers. All patients showed a visible improvement of clinical conditions with a remarkable decrease of aging signs, but this effect was higher of the hemi face treated with the ßCD-containing formulation versus formulation containing trans-resveratrol alone.

Thermosensitive In Situ Gelling Poloxamers/Hyaluronic Acid Gels for Hydrocortisone Ocular Delivery.

This study endeavored to overcome the physiological barriers hindering optimal bioavailability in ophthalmic therapeutics by devising drug delivery platforms that allow therapeutically effective drug concentrations in ocular tissues for prolonged times. Thermosensitive drug delivery platforms were formulated by blending poloxamers (F68 and F127) with low-molecular-weight hyaluronic acid (HA) in various concentrations and loaded with hydrocortisone (HC). Among the formulations examined, only three were deemed suitable based on their desirable gelling properties at a temperature close to the eye's surface conditions while also ensuring minimal gelation time for swift ocular application. Rheological analyses unveiled the ability of the formulations to develop gels at suitable temperatures, elucidating the gel-like characteristics around the physiological temperature essential for sustained drug release. The differential scanning calorimetry findings elucidated intricate hydrogel-water interactions, indicating that HA affects the water-polymer interactions within the gel by increasing the platform hydrophilicity. Also, in vitro drug release studies demonstrated significant hydrocortisone release within 8 h, governed by an anomalous transport mechanism, prompting further investigation for optimized release kinetics. The produced platforms offer promising prospects for efficacious ocular drug delivery, addressing pivotal challenges in ocular therapeutics and heralding future advancements in the domain.

Technological and Physical-Chemical Evaluation of Cotton Gauzes Impregnated with Semisolid Preparations for Wound Healing.

Chronic wounds are marked by an extended healing period during which damaged tissues fail to undergo orderly and timely repair. Examples of chronic wounds encompass venous ulcers, pressure ulcers, and diabetic foot ulcers. The process of wound healing is complex and dynamic, relying on the interplay and response among various cells and mediators. In this study, four marketed wound dressing products based on cotton gauzes impregnated with different semisolid products (namely Betadine® 10%, Connettivina® Bio Plus Fitostimoline® Plus, and Non-Ad® gauzes) have been characterized for their physicochemical properties and ex vivo behaviors. More in detail, the pH and rheological features of semisolid formulations impregnating the gauzes were analyzed along with their ability to adhere to the gauzes. The most promising ones were selected and compared in ex vivo experiments on fresh pig skin. The pH measurements showed an acidic environment for all the tested solutions, albeit with variations in mean values, ranging from 2.66 to 4.50. The outcomes of rheological studies demonstrated that all the semisolid preparations impregnating the gauzes exhibited a pseudoplastic behavior, with significant differences in the pseudoplasticity index across the preparations, which is likely to influence their ability to adhere to the gauze. A rheological study in oscillatory mode revealed rheological behavior typical of a viscous solution only for the cream impregnating non-paraffin gauzes. The other products exhibited rheological behavior typical of a weak gel, which is expected to be advantageous as regards the capability of the semisolid preparation to create and maintain the space within the wound and to provide protection to the injured tissue. Results of ex vivo experiments demonstrated that Fitostimoline® Plus was more effective than Connettivina® Bio Plus in promoting both skin hydration and energy.

Anionic polysaccharides for stabilization and sustained release of antimicrobial peptides.

Chemical and enzymatic in vivo degradation of antimicrobial peptides represents a major challenge for their therapeutic use to treat bacterial infections. In this work, anionic polysaccharides were investigated for their ability to increase the chemical stability and achieve sustained release of such peptides. The investigated formulations comprised a combination of antimicrobial peptides (vancomycin (VAN) and daptomycin (DAP)) and anionic polysaccharides (xanthan gum (XA), hyaluronic acid (HA), propylene glycol alginate (PGA) and alginic acid (ALG)). VAN dissolved in buffer of pH 7.4 and incubated at 37 °C showed first order degradation kinetics with a reaction rate constant kobs of 5.5 × 10-2 day-1 corresponding with a half-life of 13.9 days. However, once VAN was present in a XA, HA or PGA-based hydrogel, kobs decreased to (2.1-2.3) × 10-2 day-1 while kobs was not affected in an alginate hydrogel and a dextran solution (5.4 × 10-2 and 4.4 × 10-2 day-1). Under the same conditions, XA and PGA also effectively decreased kobs for DAP (5.6 × 10-2 day-1), whereas ALG had no effect and HA even increased the degradation rate. These results demonstrate that the investigated polysaccharides (except ALG for both peptides and HA for DAP) slowed down the degradation of VAN and DAP. DSC analysis was used to investigate on polysaccharide ability to bind water molecules. Rheological analysis highlighted that the polysaccharides containing VAN displayed an increase in G' of their formulations, pointing that the peptides interaction act as crosslinker of the polymer chains. The obtained results suggest that the mechanism of stabilization of VAN and DAP against hydrolytic degradation is conferred by electrostatic interactions between the ionizable amine groups of the drugs and the anionic carboxylate groups of the polysaccharides. This, in turn, results in a close proximity of the drugs to the polysaccharide chain, where the water molecules have a lower mobility and, therefore, a lower thermodynamic activity.

Hyaluronan-coated nanoparticles for active tumor targeting: Influence of polysaccharide molecular weight on cell uptake.

Here we aimed to correlate different molecular weights of hyaluronic acid (HA), 200, 800 and 1437 kDa, used to decorate poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs), to their cell uptakes. NP internalization kinetics in CD44-overexpressing breast carcinoma cells were quantified, using healthy fibroblast cells as reference. Actually, NP uptake and selectivity by tumor cells were maximized for NPs HA 800 kDa, while being minimum for NPs HA1400 kDa. This unexpected result could be explained considering that the interaction between NPs and tumor cells is dictated by rearrangement and conformation of that segment of HA chain that actually protrudes from the NPs. Overall, results obtained in this work point at how HA molecular weight, is pivotal project parameter in NP formulation to promote active targeting in the CD44 overexpressing cancer cells.

Injectable thermally responsive mucoadhesive gel for sustained protein delivery.

Poloxamer thermoresponsive gels are widely explored in controlled drug delivery. Nevertheless, these gels possess inadequate mechanical properties, poor bioadhesiveness, and high permeability to water. To overcome these issues, we blended mucoadhesive hyaluronic acid (HA) with poloxamer analogs. This study aimed to investigate the features affecting the microscopic properties of the gels, which determine their macroscopic properties and capability to control/sustain protein release. Results showed that HA hampers water-poloxamer interactions, thus, strongly influencing physicochemical properties of poloxamer gels. This leads to gels with improved mechanical properties in which the diffusion kinetics of macromolecular active molecules are drastically slowed down. Poloxamer-HA gels can sustain the delivery of proteins, such as insulin, and may allow the modulation of its release kinetics by modifying HA content within the gels in the administration sites in which the active molecule release mechanism is mainly governed by its diffusion.

Mechanical behavior of bioactive poly(ethylene glycol) diacrylate matrices for biomedical application.

The biomedical applications of physically entangled polymeric hydrogels are generally limited due to their weak mechanical properties, rapid swelling and dissolution in physiologically relevant environment. Chemical crosslinking helps stabilizing hydrogel structure and enhancing mechanical properties, thereby allowing a higher stability in phisiological environment. In this context, it is known that the mechanical properties of the hydrogel are affected by both the molecular weight (MW) of the starting polymer and the concentration of the crosslinker. Here, our aim was to assess the influence of polymer MW and concentration in the precursor solution on the mechanical features of the final hydrogel and their influence on cells-material interaction. In detail, 3D synthetic matrices based on poly(ethylene glycol) diacrylate (PEGDA) at two molecular weights (PEG 700 and PEG 3400) and at three different concentrations (10, 20, 40 w/v %), which were photopolymerized using darocour as an initiator, were studied. Then, infrared and swelling analyses, along with a comprehensive mechanical characterization of the obtained hydrogels (i.e. oscillatory shear and confined compression tests), were performed. Finally, to evaluate the influence of the mechanical features on the biological behaviour, the hydrogels were characterized in terms of cell adhesion percentage and cell viability after functionalizing the substrates with RGD peptide at three different concentrations. Results have demonstrated that both the Young's modulus (E) in compression and the elastic modulus (G') in shear of the hydrogels increase with increasing polymer precursor concentration. E decreased as MW increased, and the differences are more relevant for more concentrated hydrogels. On the contrary, G' appears to increase with increasing PEGDA MW and in particular for the lowest polymer precursor concentration. The biological results have demonstrated that cells cultured for longer times seem to prefer PEG 3400 hydrogels with a larger mesh size structure that posses higher viscoelastic properties in shear.

Drug micro-carriers with a hyaluronic acid corona toward a diffusion-limited aggregation within the vitreous body.

Posterior eye segment diseases are treated through monthly intravitreal injections, that evoke serious side effects. A promising approach to reduce injection frequency consists in producing biodegradable microspheres (MPs) releasing the protein in the vitreous body for long times. Moreover, a rational design of these MPs requires a discouraged diffusion/sedimentation within the intravitreal space, which are detrimental for the vision and the control over drug release kinetics. In this work, poly(lactic-co-glycolic acid) (PLGA)-based MPs encapsulating bovine serum albumin (BSA) were coated with hyaluronic acid (HA) at two molecular weights and tested for their release, diffusion and degradation features in simulated vitreous body (SVB). Results indicate that HA corona prolongs MP degradation time and BSA release. Furthermore, HA coating increased the affinity between MPs and SVB, thereby repressing device transport compared to control PLGA MPs. Results hold promise for the possible application of HA-decorated MPs for intravitreal injection of protein drugs.

Electron dispersive X-ray spectroscopy and degradation properties of hyaluronic acid decorated microparticles.

The purpose of this study was to produce poly(DL-lactic-co-glycolic acid) (PLGA) - based microparticles (MPs), externally decorated with hyaluronic acid (HA). The MPs are intended for intravitreal injections in the treatment of posterior eye segment and have been designed to prolong the release of growth factors into the vitreous body, therefore aiming to increase the time interval between two consecutive injections. The MPs, prepared by a modified double emulsion-solvent evaporation technique and loaded with bovine serum albumins (BSA) and ciliary neurotrophic factor (CNTF), were spherical, with a diameter around 70 µm and a >90% encapsulation efficiency. Energy Dispersive Spectroscopy (EDS) outcomes indicated that HA presence in the external aqueous phase of the emulsion did affect the surface properties of MPs. Moreover, poloxamers drastically slowed down MP degradation properties which are, in turn, closely related to their ability to prolong drug release. This is promising for the envisaged application of the produced MPs. Further work will be devoted to optimizing MP formulation with respect to the envisaged intravitreal route of administration.

CXCL12 loaded-dermal filler captures CXCR4 expressing melanoma circulating tumor cells.

Development of distant metastasis relies on interactions between cancer and stromal cells. CXCL12, also known as stromal-derived factor 1α (SDF-1α), is a major chemokine constitutively secreted in bone marrow, lymph nodes, liver and lung, playing a critical role in the migration and seeding of neoplastic cells. CXCL12 activates the CXCR4 receptor that is overexpressed in several human cancer cells. Recent evidence reveals that tumors induce pre-metastatic niches in target organ producing tumor-derived factors. Pre-metastatic niches represent a tumor growth-favoring microenvironment in absence of cancer cells. A commercially available dermal filler, hyaluronic acid (HA) -based gel, loaded with CXCL12 (CLG) reproduced a "fake" pre-metastatic niche. In vitro, B16-hCXCR4-GFP, human cxcr4 expressing murine melanoma cells efficiently migrated toward CLG. In vivo, CLGs and empty gels (EGs) were subcutaneously injected into C57BL/6 mice and 5 days later B16-hCXCR4-GFP cells were intravenously inoculated. CLGs were able to recruit a significantly higher number of B16-hCXCR4-GFP cells as compared to EGs, with reduced lung metastasis in mice carrying CLG. CLG were infiltrated by higher number of CD45-positive leukocytes, mainly neutrophils CD11b+Ly6G+ cells, myeloid CD11b+Ly6G- and macrophages F4/80. CLG recovered cells recapitulated the features of B16-hCXCR4-GFP (epithelial, melanin rich, MELAN A/ S100/ c-Kit/CXCR4 pos; α-SMA neg). Thus a HA-based dermal filler loaded with CXCL12 can attract and trap CXCR4+tumor cells. The CLG trapped cells can be recovered and biologically characterized. As a corollary, a reduction in CXCR4 dependent lung metastasis was detected.