Safe- and sustainable-by-design: The case of Smart Nanomaterials. A perspective based on a European workshop.

The European Commission's Green Deal is a major policy initiative aiming to achieve a climate-neutral, zero-pollution, sustainable, circular and inclusive economy, driving both the New Industrial Strategy for Europe and the Chemicals Strategy for Sustainability. Innovative materials can help to reach these policy goals, but they need to be safe and sustainable themselves. Thus, one aim is to shift the development of chemicals to Safe- and Sustainable-by-Design, and define a new systems approach and criteria for sustainability to achieve this. An online workshop was organised in September 2020 by the Joint Research Centre and the Directorate-General Research and Innovation of the European Commission, with participants from academia, non-governmental organisations, industry and regulatory bodies. The aims were to introduce the concept of Safe- and Sustainable-by-Design, to identify industrial and regulatory challenges in achieving safer and more sustainable Smart Nanomaterials as an example of innovative materials, and to deliver recommendations for directions and actions necessary to meet these challenges. The following needs were identified: (i) an agreed terminology, (ii) a common understanding of the principles of Safe- and Sustainable-by-Design, iii) criteria, assessment tools and incentives to achieve a transition from Safe-by-Design to Safe- and Sustainable-by-Design, and (iv) preparedness of regulators and legislation for innovative chemicals/nanomaterials. This paper presents the authors' view on the state of the art as well as the needs for future activities, based on discussions at the workshop and further considerations. The case of Smart Nanomaterials is used to illustrate the Safe- and Sustainable-by-Design concept and challenges for its implementation. Most of the considerations can be extended to other advanced materials and to chemicals and products in general.

Nano or Not Nano? A Structured Approach for Identifying Nanomaterials According to the European Commission's Definition.

Identifying nanomaterials (NMs) according to European Union legislation is challenging, as there is an enormous variety of materials, with different physico-chemical properties. The NanoDefiner Framework and its Decision Support Flow Scheme (DSFS) allow choosing the optimal method to measure the particle size distribution by matching the material properties and the performance of the particular measurement techniques. The DSFS leads to a reliable and economic decision whether a material is an NM or not based on scientific criteria and respecting regulatory requirements. The DSFS starts beyond regulatory requirements by identifying non-NMs by a proxy approach based on their volume-specific surface area. In a second step, it identifies NMs. The DSFS is tested on real-world materials and is implemented in an e-tool. The DSFS is compared with a decision flowchart of the European Commission's (EC) Joint Research Centre (JRC), which rigorously follows the explicit criteria of the EC NM definition with the focus on identifying NMs, and non-NMs are identified by exclusion. The two approaches build on the same scientific basis and measurement methods, but start from opposite ends: the JRC Flowchart starts by identifying NMs, whereas the NanoDefiner Framework first identifies non-NMs.

Physico-chemical properties of manufactured nanomaterials - Characterisation and relevant methods. An outlook based on the OECD Testing Programme.

Identifying and characterising nanomaterials require additional information on physico-chemical properties and test methods, compared to chemicals in general. Furthermore, regulatory decisions for chemicals are usually based upon certain toxicological properties, and these effects may not be equivalent to those for nanomaterials. However, regulatory agencies lack an authoritative decision framework for nanomaterials that links the relevance of certain physico-chemical endpoints to toxicological effects. This paper investigates various physico-chemical endpoints and available test methods that could be used to produce such a decision framework for nanomaterials. It presents an overview of regulatory relevance and methods used for testing fifteen proposed physico-chemical properties of eleven nanomaterials in the OECD Working Party on Manufactured Nanomaterials' Testing Programme, complemented with methods from literature, and assesses the methods' adequacy and applications limits. Most endpoints are of regulatory relevance, though the specific parameters depend on the nanomaterial and type of assessment. Size (distribution) is the common characteristic of all nanomaterials and is decisive information for classifying a material as a nanomaterial. Shape is an important particle descriptor. The octanol-water partitioning coefficient is undefined for particulate nanomaterials. Methods, including sample preparation, need to be further standardised, and some new methods are needed. The current work of OECD's Test Guidelines Programme regarding physico-chemical properties is highlighted.

Regulatory aspects of nanotechnology in the agri/feed/food sector in EU and non-EU countries.

Nanotechnology has the potential to innovate the agricultural, feed and food sectors (hereinafter referred to as agri/feed/food). Applications that are marketed already include nano-encapsulated agrochemicals or nutrients, antimicrobial nanoparticles and active and intelligent food packaging. Many nano-enabled products are currently under research and development, and may enter the market in the near future. As for any other regulated product, applicants applying for market approval have to demonstrate the safe use of such new products without posing undue safety risks to the consumer and the environment. Several countries all over the world have been active in examining the appropriateness of their regulatory frameworks for dealing with nanotechnologies. As a consequence of this, different approaches have been taken in regulating nano-based products in agri/feed/food. The EU, along with Switzerland, were identified to be the only world region where nano-specific provisions have been incorporated in existing legislation, while in other regions nanomaterials are regulated more implicitly by mainly building on guidance for industry. This paper presents an overview and discusses the state of the art of different regulatory measures for nanomaterials in agri/feed/food, including legislation and guidance for safety assessment in EU and non-EU countries.

Novel foods, food enzymes, and food additives derived from food by-products of plant or animal origin: principles and overview of the EFSA safety assessment.

The European Union (EU) is committed to transitioning toward a circular economy model, with food waste being one of the areas to be targeted. To close the loop of food waste generated during food processing and discarded at the retail or consumption phases, research and innovation parties proposed to valorize agro-food by-products to produce novel foods and food improvement agents (food additives, food enzymes, and food flavorings). In the EU, the authorization of such novel foods and food improvement agents is governed by different regulatory frameworks. A centralized safety assessment by the European Food Safety Authority (EFSA) is the prerequisite for their authorization through the so-called Union Lists. Up to December 2023, EFSA published 45 scientific opinions on the safety of novel foods, food enzymes, and food additives derived from by-products of plant and animal origin. The current study illustrates examples of these by-products for the production of novel foods or food improvement agents and the data requirements behind their respective safety assessments conducted by EFSA. In this review, applications on novel foods, food enzymes, and food additives received by EFSA were screened and analyzed to find the common scientific requirements and differences in terms of the safety evaluation of such products. Various by-products (i.e., corncobs, coffee husks, spent grains of barley and rice, grape pomace, pumpkin peels, bovine whey, eggshells, shrimp heads, and animal organs or tissues) were described in the applications as being processed (extraction, physical treatments, and chemical and enzymatic reactions) to obtain novel foods and food improvement agents. The heterogeneity and complexity of these products emphasize the challenge of their safety assessment, depending on the characteristics of each product. However, as this study shows, the scientific requirements underpinning their safety do not differ substantially in the different regulated product areas considered, with similar information needed to assess their safety in terms of identity, production process, compositional characterization, proposed/intended uses and exposure assessment, toxicological information, and allergenicity data. Additional nutritional information and data on the history of use are required in the case of novel foods.

Flavouring Group Evaluation 413 (FGE.413): Naringenin.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of naringenin [FL-no: 16.132] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. No other substances with sufficient structural similarity have been identified in existing FGEs that could be used to support a read-across approach. The information provided on the manufacturing process, the composition and the stability of [FL-no: 16.132] was considered sufficient. From studies carried out with naringenin, the Panel concluded that there is no concern with respect to genotoxicity. The use of naringenin as a flavouring substance at added portions exposure technique (APET) exposure levels is unlikely to pose a risk for drug interaction. For the toxicological evaluation of naringenin, the Panel requested an extended one-generation toxicity study on naringenin, in line with the requirements of the Procedure and to investigate the consequence of a possible endocrine-disrupting activity. The Panel considered that changes in thymus weight, litter size, post-implantation loss and a consistent reduced pup weight in the high-dose F2 generation could not be dismissed and selected therefore, the mid-dose of 1320 mg/kg body weight (bw) per day for the parental males as the no observed adverse effect level (NOAEL) of the study. The exposure estimates for [FL-no: 16.132] (31,500 and 50,000 µg/person per day for children and adults, respectively) were above the threshold of toxicological of concern (TTC) for its structural class (III). Using the NOAEL of 1320 mg/kg bw per day at step A4 of the procedure, margins of exposure (MoE) of 1590 and 630 could be calculated for adults and children, respectively. Based on the calculated MoEs, the Panel concluded that the use of naringenin as a flavouring substance does not raise a safety concern.

Re-evaluation of guar gum (E 412) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as food additive for uses in foods for all population groups.

Guar gum (E 412) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to this assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of guar gum (E 412) for its uses as food additive in food for infants below 16 weeks of age belonging to food categories 13.1.1 (Infant formulae) and 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population. The process involved the publication of a call for data to allow the interested business operators to provide the requested information to complete the risk assessment. In the response to EFSA requests, one IBO stated that E 412 is not used in food categories 13.1.1 and 13.1.5.1, but it is present in products under food category 13.1.5.2. The Panel concluded that the submitted data are not sufficient to support the safe use of guar gum (E 412) in food for infants (below and above 16 weeks of age) and young children under FC 13.1.1, 13.1.5.1 and 13.1.5.2. Additionally, the Panel concluded that the technical data provided by the IBO support further amendments of the specifications for E 412 laid down in Commission Regulation (EU) No 231/2012.

NanoDefiner Framework and e-Tool Revisited According to the European Commission's Nanomaterial Definition 2022/C 229/01.

The new recommended definition of a nanomaterial, 2022/C 229/01, adopted by the European Commission in 2022, will have a considerable impact on European Union legislation addressing chemicals, and therefore tools to implement this new definition are urgently needed. The updated NanoDefiner framework and its e-tool implementation presented here are such instruments, which help stakeholders to find out in a straightforward way whether a material is a nanomaterial or not. They are two major outcomes of the NanoDefine project, which is explicitly referred to in the new definition. This work revisits the framework and e-tool, and elaborates necessary adjustments to make these outcomes applicable for the updated recommendation. A broad set of case studies on representative materials confirms the validity of these adjustments. To further foster the sustainability and applicability of the framework and e-tool, measures for the FAIRification of expert knowledge within the e-tool's knowledge base are elaborated as well. The updated framework and e-tool are now ready to be used in line with the updated recommendation. The presented approach may serve as an example for reviewing existing guidance and tools developed for the previous definition 2011/696/EU, particularly those adopting NanoDefine project outcomes.

Re-evaluation of xanthan gum (E 415) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as a food additive for uses in foods for all population groups.

Xanthan gum (E 415) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food. As a follow-up to that assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of xanthan gum (E 415) for its uses as a food additive in food for infants below 16 weeks of age belonging to food category (FC) 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population. The process involved the publication of a call for data to allow the interested business operators to provide the requested information to complete the risk assessment. The Panel concluded that the technical data provided by the interested business operators support an amendment of the specifications for E 415 laid down in Commission Regulation (EU) No 231/2012. Due to the low validity of the available clinical studies, the Panel concluded that a reference point could not be derived from them but the results of the available studies on neonatal piglets could serve to derive a reference point. The Panel calculated the margin of exposure for infants below 16 weeks of age consuming food for special medical purposes (FC 13.1.5.1) for the highest xanthan gum exposure and concluded that there are no safety concerns for the use of xanthan gum (E 415) as a food additive in FC 13.1.5.1.

Re-evaluation of locust bean gum (E 410) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as a food additive for uses in foods for all population groups.

Locust bean gum (E 410) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to that assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of locust bean gum (E 410) for its uses as a food additive in food for infants below 16 weeks of age belonging to food category 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population, including the safety assessment for FC 13.1.5.1 and 13.1.5.2 (Dietary foods for babies and young children for special medical purposes as defined in directive 1999/21/EC). The process involved the publication of a call for data. Based on the received data, the Panel concluded that the technical data provided by the interested business operators support an amendment of the specifications for locust bean gum (E 410) laid down in Commission Regulation (EU) No 231/2012. The Panel identified a reference point of 1,400 mg/kg bw per day based on reduced blood zinc levels in a piglet study. It applied the margin of exposure (MoE) for the safety assessment of locust bean gum (E 410) when used as a food additive in FC 13.1.5.1 and 13.1.5.2. The Panel concluded that a MoE above 1 would not raise a safety concern. A MoE above 1 was obtained for some of the scenarios and exposure levels for infants. For toddlers (consumers only of food for special medical purposes), the MoE was above 1 for all exposure levels.

Re-evaluation of calcium carbonate (E 170) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as food additive for uses in foods for all population groups.

Calcium carbonate (E 170) was re-evaluated in 2011 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to this assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of calcium carbonate (E 170) for its uses as a food additive in food for infants below 16 weeks of age belonging to food category 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants) and as carry over in line with Annex III, Part 5 Section B to Regulation (EC) No 1333/2008. In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population. The process involved the publication of a call for data to allow the interested business operators (IBOs) to provide the requested information to complete the risk assessment. The Panel concluded that there is no need for a numerical acceptable daily intake (ADI) for calcium carbonate and that, in principle, there are no safety concern with respect to the exposure to calcium carbonate per se at the currently reported uses and use levels in all age groups of the population, including infants below 16 weeks of age. With respect to the calcium intake resulting from the use of E 170 in food for the general population and infants < 16 weeks of age, the Panel concluded that it contributes only to a small part to the overall calcium dietary exposure. However, the unavoidable presence of aluminium in E 170 is of concern and should be addressed. In addition, the Panel concluded that the technical data provided by the IBO support further amendments of the specifications for E 170 laid down in Commission Regulation (EU) No 231/2012.

Scientific opinion on the renewal of the authorisation of Scansmoke SEF7525 (SF-004) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Scansmoke SEF7525 (SF-004), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Scansmoke SEF7525 is obtained from a tar produced from a mixture of red oak, white oak, maple, beech and hickory. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 32.6 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with Food Additive Intake Model (FAIM) ranged from 0.6 to 3.8 mg/kg body weight (bw) per day at the mean and from 1.1 to 10.1 mg/kg bw per day at the 95th percentile. Based on the available information on genotoxicity on 44 identified components, the Panel concluded that two substances in the Primary Product, styrene and benzofuran, raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. Considering that the exposure estimates for styrene and benzofuran are above the threshold of toxicological concern (TTC) value of 0.0025 kg/kg bw per day for DNA-reactive mutagens and/or carcinogens and since further data are needed to clarify their potential genotoxicity, the Panel concluded that the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R714 (SF-001) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R714 (SF-001), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R714 is obtained by pyrolysis of beech and oak woods as main source materials. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 39 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.7 to 10.9 mg/kg body weight (bw) per day at the mean and from 2.2 to 42.5 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the threshold of toxicological concern (TTC) of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R709 (SF-008) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R709 (SF-008), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R709 is obtained by pyrolysis of beech and oak wood as main source materials. The panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.8 to 12.2 mg/kg body weight (bw) per day at the mean and from 2.3 to 51.4 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the TTC of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the panel concluded that the Primary Product raises concern with respect to genotoxicity.

Re-evaluation of sucrose esters of fatty acids (E 473) as a food additive in foods for infants below 16 weeks of age and follow-up of its previous evaluations as food additive for uses in foods for all population groups.

Sucrose esters of fatty acids (E 473) was re-evaluated in 2004 by the former EFSA Panel on Food Additives, Flavourings, Processing Aids and Materials in Contact with Food (AFC Panel). In addition, the former EFSA Panel on Food Additives and Nutrient Sources added to Food (ANS Panel) issued scientific opinions on the safety of sucrose esters of fatty acids (E 473) in 2010, 2012 and 2018. As a follow-up to these assessments, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of sucrose esters of fatty acids (E 473) for its uses as food additive in food for infants below 16 weeks of age. In addition, the FAF Panel was requested to address the issues already identified by the EFSA AFC and ANS Panels when used in food for the general population. The process involved the publication of calls for data to allow the interested business operators to provide the requested information to complete the risk assessment. The Panel concluded that the technical data provided by the interested business operators support an amendment of the specifications for sucrose esters of fatty acids (E 473) laid down in Commission Regulation (EU) No 231/2012. According to the available information, E 473 is not used in food categories (FCs) 13.1.1 and 13.1.5.1, including all types of food for infants below 16 weeks of age, and in FC 13.1.5.2. As a consequence, an assessment of the safety for the uses of E 473 as food additive in these FCs and age group was not performed. When the updated exposure estimates considering the provided use levels for some food categories are taken into account the estimates of exposure to sucrose esters of fatty acids (E 473) exceeded the group acceptable daily intake (ADI) of 40 mg/kg body weight (bw) per day for many population groups.

Safety evaluation of the food additive steviol glycosides, predominantly Rebaudioside M, produced by fermentation using Yarrowia lipolyticaVRM.

The EFSA Panel on Food Additive and Flavourings (FAF Panel) provides a scientific opinion on the safety of a new process to produce steviol glycosides by fermentation of simple sugars using a genetically modified strain of Yarrowia lipolytica (named Y. lipolytica VRM). The manufacturing process may result in impurities different from those that may be present in the other steviol glycosides E 960a-d, therefore the Panel concluded that separate specifications are required for the food additive produced as described in the current application. Viable cells and DNA from the production strain are not present in the final product. The Panel considered that the demonstration of the absence of kaurenoic acid in the proposed food additive, using a method with a limit of detection (LOD) of 0.3 mg/kg, is adequate to dispel the concerns for potential genotoxicity. Given that all steviol glycosides follow the same metabolic pathways, the Panel considered that the current steviol glycosides would fall within the same group of substances. Therefore, the Panel considered that the already existing data on rebaudioside M and structurally related steviol glycosides are sufficient, and a similar metabolic fate and toxicity is expected for the food additive. The results from the bacterial reverse mutation assay and the in vitro micronucleus assay were negative and indicated absence of genotoxicity from the food additive. The existing acceptable daily intake (ADI) of 4 mg/kg body weight (bw) per day, expressed as steviol equivalents, was considered to be applicable to the proposed food additive. The Panel concluded that there is no safety concern for steviol glycosides, predominantly Rebaudioside M, produced by fermentation using Y. lipolytica VRM, to be used as a food additive at the proposed uses and use levels.

Opinion on the re-evaluation of sodium carboxy methyl cellulose (E 466) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as food additive for uses in foods for all population groups.

Sodium carboxy methyl cellulose (E 466) was re-evaluated in 2018 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to this assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of E 466 for its uses as a food additive in food for infants below 16 weeks of age belonging to food categories (FC) 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants) in line with Regulation (EC) No 1333/2008. In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population, including the safety assessment for FC 13.1.5.1 and 13.1.5.2 (Dietary foods for babies and young children for special medical purposes as defined in directive 1999/21/EC). The process involved the publication of a call for data. Based on the received data, the Panel concluded that the technical data provided by the interested business operator support an amendment of the specifications for sodium carboxy methyl cellulose (E 466) laid down in Commission Regulation (EU) No 231/2012. The interested business operators declared that E 466 is not used in food for infants below 16 weeks of age and in FC 13.1.5.1. Due to the lack of data, an assessment has not been performed for this FC and age group. The interested business operators did not provide biological and toxicological data to support the uses of E 466 in FC 13.1.5.2. Due to the almost unchanged database compared to the situation before the call for data, the FAF Panel confirmed the previous EFSA ANS Panel conclusion according to which the available data did not allow for an adequate assessment of the safety of use of sodium carboxy methyl cellulose (E 466) in infants and young children consuming foods belonging to the FC 13.1.5.2. ©2022 European Food Safety Authority. EFSA Journal published by John Wiley and Sons Ltd on behalf of European Food Safety Authority.

Re-evaluation of neohesperidine dihydrochalcone (E 959) as a food additive.

The present opinion deals with the re-evaluation of neohesperidine dihydrochalcone (E 959) when used as a food additive. It is obtained by catalytic hydrogenation of a flavanone - neohesperidine - which is naturally occurring and thus isolated by alcohol extraction in bitter oranges (Citrus aurantium). Based on in vivo data in rat, neohesperidine dihydrochalcone is likely to be absorbed, also in humans, and to become systemically available. It does not raise a concern regarding genotoxicity. The toxicity data set consisted of studies on subchronic and prenatal developmental toxicity. No human studies were available. The data set was considered sufficient to derive a new acceptable daily intake (ADI). Based on the weight of evidence (WoE) analysis, the Panel considered unlikely that neohesperidine dihydrochalcone would lead to adverse effects on health in animals in the dose ranges tested. The Panel also considered that a carcinogenicity study was not warranted and that the lack of human data did not affect the overall confidence in the body of evidence. The Panel derived an ADI of 20 mg/kg bodyweight (bw) per day based on a no observed adverse effect level (NOAEL) of 4,000 mg/kg bw per day from a 13-week study in rat, applying the standard default factors of 100 for inter- and intraspecies differences and of 2 for extrapolation from subchronic to chronic exposure. For the refined brand-loyal exposure assessment scenario, considered to be the most appropriate for the risk assessment, the exposure estimates at the mean ranged from < 0.01 to 0.09 mg/kg bw per day and at the 95th percentile (P95) from 0.01 to 0.24 mg/kg bw per day. Considering the derived ADI of 20 mg/kg bw per day, the exposure estimates were below the reference value in all age groups. Therefore, the Panel concluded that dietary exposure to the food additive neohesperidine dihydrochalcone (E 959) at the reported uses and use levels would not raise a safety concern.

Follow-up of the re-evaluation of sulfur dioxide (E 220), sodium sulfite (E 221), sodium bisulfite (E 222), sodium metabisulfite (E 223), potassium metabisulfite (E 224), calcium sulfite (E 226), calcium bisulfite (E 227) and potassium bisulfite (E 228).

Sulfur dioxide-sulfites (E 220-228) were re-evaluated in 2016, resulting in the setting of a temporary ADI of 0.7 mg SO2 equivalents/kg bw per day. Following a European Commission call for data, the present follow-up opinion assesses data provided by interested business operators (IBOs) and additional evidence identified in the publicly available literature. No new biological or toxicological data addressing the data gaps described in the re-evaluation were submitted by IBOs. Taking into account data identified from the literature search, the Panel concluded that there was no substantial reduction in the uncertainties previously identified in the re-evaluation. Therefore, the Panel considered that the available toxicity database was inadequate to derive an ADI and withdrew the current temporary group acceptable daily intake (ADI). A margin of exposure (MOE) approach was considered appropriate to assess the risk for these food additives. A lower confidence limit of the benchmark dose of 38 mg SO2 equivalents/kg bw per day, which is lower than the previous reference point of 70 mg SO2 equivalents/kg bw per day, was estimated based on prolonged visual evoked potential latency. An assessment factor of 80 was applied for the assessment of the MoE. At the estimated dietary exposures, when using a refined exposure scenario (Data set D), MOEs at the maximum of 95th percentile ranges were below 80 for all population groups except for adolescents. The dietary exposures estimated using the maximum permitted levels would result in MOEs below 80 in all population groups at the maximum of the ranges of the mean, and for most of the population groups at both minimum and maximum of the ranges at the 95th percentile. The Panel concluded that this raises a safety concern for both dietary exposure scenarios. The Panel also performed a risk assessment for toxic elements present in sulfur dioxide-sulfites (E 220-228), based on data submitted by IBOs, and concluded that the maximum limits in the EU specifications for arsenic, lead and mercury should be lowered and a maximum limit for cadmium should be introduced.

Thiophene based europium ß-diketonate complexes: effect of the ligand structure on the emission quantum yield.

The synthesis and the molecular and photophysical characterization, together with solid state and solution structure analysis, of a series of europium complexes based on ß-diketonate ligands are reported. The Eu(III) complex emission, specifically its photoluminescence quantum yield (PL-QY), can be tuned by changing ligands which finely modifies the environment of the metal ion. Steady-state and time-resolved emission spectroscopy and overall PL-QY measurements are reported and related to geometrical features observed in crystal structures of some selected compounds. Moreover, paramagnetic NMR, based on the analogous complexes with other lanthanides, are use to demonstrate that there is a significant structural reorganization upon dissolution, which justifies the observed differences in the emission properties between solid and solution states. The energy of the triplet levels of the ligands and the occurrence of nonradiative deactivation processes clearly account for the luminescence efficiencies of the complexes in the series.