RESUMO
Fractal assembly technology enables scalable construction of organic crystal patterns for emerging nanoelectronics and optoelectronics. Here, a polymer-templating assembly strategy is presented for centimeter-scale patterned growth of fractal organic crystals (FOCs). These structures are formed by drop-coating perylene solution directly onto a gelatin-modified surface, resulting in the formation of crisscross fractal patterns. By adjusting the tilt angle of the template, the morphology of FOCs can be effectively controlled, with the diameter distribution of each level branch ranging from hundreds to ten micrometers. The planar FOC device exhibits flexible photoreception and photosynaptic capabilities, with a high specific detectivity of 1.35 × 109 Jones and paired-pulse facilitation (PPF) index of 104%, withstanding a 0.5 cm bending radius during bending test. These findings present a reliable route for large-scale assembly of flexible organic crystalline materials toward neuromorphic electronics.
RESUMO
Herein, we synthesized two donor-acceptor (D-A) type small organic molecules with self-assembly properties, namely MPA-BT-BA and MPA-2FBT-BA, both containing a low acidity anchoring group, benzoic acid. After systematically investigation, it is found that, with the fluorination, the MPA-2FBT-BA demonstrates a lower highest occupied molecular orbital (HOMO) energy level, higher hole mobility, higher hydrophobicity and stronger interaction with the perovskite layer than that of MPA-BT-BA. As a result, the device based-on MPA-2FBT-BA displays a better crystallization and morphology of perovskite layer with larger grain size and less non-radiative recombination. Consequently, the device using MPA-2FBT-BA as hole transport material achieved the power conversion efficiency (PCE) of 20.32 % and remarkable stability. After being kept in an N2 glove box for 116â days, the unsealed PSCs' device retained 93 % of its initial PCE. Even exposed to air with a relative humidity range of 30±5 % for 43â days, its PCE remained above 91 % of its initial condition. This study highlights the vital importance of the fluorination strategy combined with a low acidity anchoring group in SAMs, offering a pathway to achieve efficient and stable PSCs.
RESUMO
Magnetic levitation (MagLev) is a promising density-based analytical technique with numerous applications. Several MagLev structures with different levels of sensitivity and range have been studied. However, these MagLev structures can seldom satisfy the different performance requirements simultaneously, such as high sensitivity, wide measurement range, and easy operation, which have prevented them from being widely used. In this work, a tunable MagLev system was developed. It is confirmed by numerical simulation and experiments that this system possesses a high resolution down to 10-7 g/cm3 or even higher compared to the existing systems. Meanwhile, the resolution and range of this tunable system can be adjusted to meet different requirements of measurement. More importantly, this system can be operated simply and conveniently. This bundle of characteristics demonstrates that the novel tunable MagLev system could be handily applied in various density-based analyses on demand, which would greatly expand the ability of MagLev technology.
RESUMO
Recently, an increasing number of researchers have begun to focus on developing nonfullerene acceptors, so it is very important to synthesize new polymers that are compatible with nonfullerene acceptors. Besides, wide- or medium-bandgap polymer donors could be better to match narrow nonfullerene acceptors. The design of medium-bandgap (MBG) polymer donors and their application in organic photovoltaics (OPVs) play an important part in the improvement of OPV device performance. This review summarizes the photovoltaic performance of MBG polymers that have been reported during the last decade. Furthermore, their structure-property relationships and device performance are discussed. On the basis of analyzing many polymer structures, guidance toward the design of novel photovoltaic materials might be helpful to understand the basic OPV mechanism and the path towards commercialization.
Assuntos
Técnicas Eletroquímicas , Fulerenos/química , Polímeros/química , Fontes de Energia Elétrica , Estrutura Molecular , Energia SolarRESUMO
A quick method for estimating the layer number of black phosphorus is demonstrated by simple color-comparison using optical microscope in this paper. A thickness-dependent reflection model of black phosphorus/SiO2 /Si is constructed and a colorbar confirmed by experiments is obtained for quick identifying layer number. The enhanced visibility affected by substrates or wavelength of light is further verified by calculating the contrast.
RESUMO
A pearl-necklace-shaped silicon nanowire, in contrast to a smooth nanowire, presents a much lower thermal conductivity due to the phonon trapping effect. By precisely controlling the pearl size and density, this reduction can be more than 70% for the structures designed in the study, which provides a unique approach for designing high-performance nanoscale thermoelectric devices.
RESUMO
In this study, a nonflammable all-fluorinated electrolyte for lithium-ion cells with a Li(Ni0.8Mn0.1Co0.1)O2 cathode is investigated under high voltages. This electrolyte, named FT46, consists of fluoroethylene carbonate (FEC) and bis(2,2,2-trifluoroethyl) carbonate (TFEC) in a mass ratio of 4:6. Compared to a commercially available electrolyte and several other fluorinated electrolytes, cells containing FT46 demonstrate significantly better cycling performances under high voltage (3.0-4.5 V). This result may be ascribed to the generation of a stable, smooth, and thin passivation layer and the improved solvation structure formed by FT46. The LiF-rich passivation layer strengthens the electrode/electrolyte interface, inhibits the degradation of the electrode, and suppresses side reactions between the electrodes and electrolytes under high voltage. The solvation structure formed by FT46 is derived from anions, enabling an enhanced Li+ migration rate and inhibiting lithium plating generation. Additionally, due to the nonflammability of the electrolyte and the stable passivation layers, FT46 cells also demonstrate promising safety characteristics when exposed to typical abusive conditions, such as thermal abuse, mechanical abuse, and electrical abuse.
RESUMO
The iodide vacancy defects generated during the perovskite crystallization process are a common issue that limits the efficiency and stability of perovskite solar cells (PSCs). Although excessive ionic iodides have been used to compensate for these vacancies, they are not effective in reducing defects through modulating the perovskite crystallization. Moreover, these iodide ions present in the perovskite films can act as interstitial defects, which are detrimental to the stability of the perovskite. Here, an effective approach to suppress the formation of vacancy defects by manipulating the coordination chemistry of lead polyhalides during perovskite crystallization is demonstrated. To achieve this suppression, an α-iodo ketone is introduced to undergo a process of Kornblum oxidation reaction that releases halide ions. This process induces a rapid collective transformation of lead polyhalides during the nucleation process and significantly reduces iodide vacancy defects. As a result, the ion mobility is decreased by one order of magnitude in perovskite film and the PSC achieves significantly improved thermal stability, maintaining 82% of its initial power conversion efficiency at 85 °C for 2800 h. These findings highlight the potential of halide ions released by the Kornblum oxidation reaction, which can be widely used for achieving high-performance perovskite optoelectronics.
RESUMO
Flexible zinc-ion batteries (ZIBs) with high capacity and long cycle stability are essential for wearable electronic devices. Hydrogel electrolytes have been developed to provide ion-transfer channels while maintaining the integrity of ZIBs under mechanical strain. However, hydrogel matrices are typically swollen with aqueous salt solutions to increase ionic conductivity, which can hinder intimate contact with electrodes and reduce mechanical properties. To address this, a single-Zn-ion-conducting hydrogel electrolyte (SIHE) is developed by integrating polyacrylamide network and pseudo-polyrotaxane structure. The SIHE exhibits a high Zn2+ transference number of 0.923 and a high ionic conductivity of 22.4 mS cm-1 at room temperature. Symmetric batteries with SIHE demonstrate stable Zn plating/stripping performance for over 160 h, with a homogenous and smooth Zn deposition layer. Full cells with La-V2 O5 cathodes exhibit a high capacity of 439 mA h g-1 at 0.1 A g-1 and excellent capacity retention of 90.2% after 3500 cycles at 5 A g-1 . Moreover, the flexible ZIBs display stable electrochemical performance under harsh conditions, such as bending, cutting, puncturing, and soaking. This work provides a simple design strategy for single-ion-conducting hydrogel electrolytes, which could pave the way for long-life aqueous batteries.
RESUMO
Due to the low cost, light weight, semitransparency, good flexibility, and large manufacturing area of organic solar cells (OSCs), OSCs have the opportunity to become the next generation of solar cells in some specific applications. So far, the efficiency of the OSC device has been improved by more than 20%. The optical band gap between the lowest unoccupied molecular orbital (LUMO) level and the highest occupied molecular orbital (HOMO) level is an important factor affecting the performance of the device. Selenophene, a derivative of aromatic pentacyclic thiophene, is easy to polarize, its LUMO energy level is very low, and hence the optical band gap can be reduced. In addition, the selenium atoms in selenophene and other oxygen atoms or sulfur atoms can form an intermolecular interaction, so as to improve the stacking order of the active layer blend film and improve the carrier transport efficiency. This paper introduces the organic solar active layer materials containing selenium benzene in recent years, which can be simply divided into donor materials and acceptor materials. Replacing sulfur atoms with selenium atoms in these materials can effectively reduce the corresponding optical band gap of materials, improve the mutual solubility of donor recipient materials, and ultimately improve the device efficiency. Therefore, the sulfur in thiophene can be completely replaced by selenium or oxygen of the same family, which can be used in the active layer materials of organic solar cells. This article mainly describes the application of selenium instead of sulfur in OSCs.
RESUMO
High-performance organic semiconductors should have good spectral absorption, a narrow energy gap, excellent thermal stability and good blend film morphology to obtain high-performance organic photovoltaics (OPVs). Therefore, we synthesized two IDTz-based electron acceptors in this research. When they were blended with donor PTB7-Th to prepare OPV devices, the PTB7-Th:IDTz-BARO-based binary OPVs exhibited a power conversion efficiency (PCE) of 0.37%, with a short-circuit current density (Jsc) of 1.24 mA cm-2, a fill factor (FF) of 33.99% and an open-circuit voltage (Voc) of 0.87 V. The PTB7-Th:IDTz-BARS-based binary OPVs exhibited PCE of 4.39%, with Jsc of 8.09 mA cm-2, FF of 54.13% and Voc of 1.00 V. The results show the strong electronegativity terminal group to be beneficial to the construction of high-performance OPV devices. Highlights: (1) Two new acceptors based on 5,5'-(4,4,9,9-tetrakis (4-hexylphenyl)-4,9-dihydro-s-indaceno [1,2-b:5,6-b'] dithiophene-2,7-diyl) dithiazole (IDTz) and different end groups (BARS, BARO) were synthesized; (2) BARS and BARO are electron-rich end groups, and the electron acceptors involved in the construction show excellent photoelectric properties. They can properly match the donor PTB7-Th, and show the appropriate surface morphology of the active layer in this work; (3) Compared with IDTz-BARO, IDTz-BARS has deeper LUMO and HOMO energy levels. In combination with PTB7-Th, it shows 4.39% device efficiency, 8.09 mA cm-2 short-circuit current density and 1.00 V open circuit voltage.
RESUMO
Nanozymes have been extensively investigated to imitate protein enzymes in biomimetic chemistry and the identification of the active site is believed to be the pre-requisite before one can effectively regulate their activity. Herein, ultrathin NiCo LDH nanosheets are synthesized via a fast co-precipitation at room temperature and can be stably dispersed in water without any additives of surfactants or organic solvents. By tuning the ratio between Ni and Co in LDH nanosheets, the activity is tuned and their peroxidase-like activity is determined by Co sites that show higher affinity to both 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide (H2O2) due to the strong Lewis acidity of Co3+ and the low redox potential of Co3+/Co2+. Together with their small crystallite size, ultra-thin thickness and tunable composition, NiCo LDH is used as a nanozyme for highly sensitive colorimetric detection of H2O2 and the limit of detection (LOD) reaches 0.48 µM.
Assuntos
Cobalto/química , Peróxido de Hidrogênio/análise , L-Lactato Desidrogenase/metabolismo , Leite/química , Nanofios/química , Níquel/química , Peroxidase/metabolismo , Animais , Biomimética , Domínio Catalítico , Bovinos , Colorimetria , L-Lactato Desidrogenase/química , Limite de Detecção , Oxirredução , Peroxidase/químicaRESUMO
Anelastic materials exhibit gradual full recovery of deformation once a load is removed, leading to dissipation of internal mechanical energy. As a consequence, anelastic materials are being investigated for mechanical damping applications. At the macroscopic scale, however, anelasticity is usually very small or negligible, especially in single-crystalline materials. Here, we show that single-crystalline ZnO and p-doped Si nanowires can exhibit anelastic behaviour that is up to four orders of magnitude larger than the largest anelasticity observed in bulk materials, with a timescale on the order of minutes. In situ scanning electron microscope tests of individual nanowires showed that, on removal of the bending load and instantaneous recovery of the elastic strain, a substantial portion of the total strain gradually recovers with time. We attribute this large anelasticity to stress-gradient-induced migration of point defects, as supported by electron energy loss spectroscopy measurements and also by the fact that no anelastic behaviour could be observed under tension. We model this behaviour through a theoretical framework by point defect diffusion under a high strain gradient and short diffusion distance, expanding the classic Gorsky theory. Finally, we show that ZnO single-crystalline nanowires exhibit a high damping merit index, suggesting that crystalline nanowires with point defects are promising materials for energy damping applications.
RESUMO
As a fundamental element of a nanoscale passive circuit, a nano-inductor is proposed based on a hetero-nanotube consisting of a spiral carbon strip and a spiral boron nitride strip. It is shown by density functional theory associated with nonequilibrium Green function calculations that the nanotube exhibits attractive transport properties tunable by tube chirality, diameter, component proportion and connection manner between the two strips, with excellent 'OFF' state performance and high current on the order of 10-100 µA. All the hetero-nanotubes show negative differential resistance. The transmission peaks of current are absolutely derived from the helicoid carbon strips or C-BN boundaries, giving rise to a spiral current analogous with an energized nano-solenoid. According to Ampere's Law, the energized nano-solenoid can generate a uniform and tremendous magnetic field of more than 1 tesla, closing to that generated by the main magnet of medical nuclear magnetic resonance. Moreover, the magnitude of magnetic field can be easily modulated by bias voltage, providing great promise for a nano-inductor to realize electromagnetic conversion at the nanoscale.
RESUMO
A simple solvothermal approach has been developed to successfully synthesize n-type α-In2Te3 thermoelectric nanomaterials. The nanostring-cluster hierarchical structures were prepared using In(NO3)3 and Na2TeO3 as the reactants in a mixed solvent of ethylenediamine and ethylene glycol at 200°C for 24 h. A diffusion-limited reaction mechanism was proposed to explain the formation of the hierarchical structures. The Seebeck coefficient of the bulk pellet pressed by the obtained samples exhibits 43% enhancement over that of the corresponding thin film at room temperature. The electrical conductivity of the bulk pellet is one to four orders of magnitude higher than that of the corresponding thin film or p-type bulk sample. The synthetic route can be applied to obtain other low-dimensional semiconducting telluride nanostructures.PACS: 65.80.-g, 68.35.bg, 68.35.bt.