Tough, aorta-inspired soft composites.

Spatial variations in fiber alignment (and, therefore, in mechanical anisotropy) play a central role in the excellent toughness and fatigue characteristics of many biological materials. In this work, we examine the effect of fiber alignment in soft composites, including both "in-plane" and "out-of-plane" fiber arrangements. We take inspiration from the spatial variations of fiber alignment found in the aorta to three-dimensionally (3D) print soft, tough silicone composites with an excellent combination of stiffness, toughness, and fatigue threshold, regardless of the direction of loading. These aorta-inspired composites exhibit mechanical properties comparable to skin, with excellent combinations of stiffness and toughness not previously observed in synthetic soft materials.

Direct ink writing of tough, stretchable silicone composites.

In this work, we report 3D printable soft composites that are simultaneously stretchable and tough. The matrix of the composite consists of polydimethylsiloxane containing octuple hydrogen bonding sites, resulting in a material significantly tougher than conventional polydimethylsiloxane. Short glass fibers are also added to the material. Prior to solvent evaporation, the material possesses a viscoelastic yield stress making it suitable for printing via direct ink writing. We mechanically characterize the printed composite, including fracture tests. We observe robust crack deflection and delay of catastrophic failure, leading to measured toughness values up to 2 00 000 J m-2 for specimens with 5 vol% glass fibers. The printed composites exhibit an unprecedented combination of stiffness, stretchability, and toughness.

Finite deformation near a crack tip terminated at an interface between two neo-Hookean sheets.

A crack terminating at an arbitrary angle to the interface between two neo-Hookean sheets is investigated under plane stress conditions using finite deformation theory. The asymptotic crack-tip deformation and stress fields are analyzed as a function of the ratio of the moduli and the angle of the crack relative to the interface. Full-held numerical calculations and experimental studies validate the analytical results. A stretch-based crack growth criterion is developed using crack-tip held solutions. Such criterion can predict the delay of crack growth through the bi-material interface observed in experiments and can be extended to any heterogeneity and material.

Focusing and Mode Separation of Elastic Vector Solitons in a 2D Soft Mechanical Metamaterial.

Soft mechanical metamaterials can support a rich set of dynamic responses, which, to date, have received relatively little attention. Here, we report experimental, numerical, and analytical results describing the behavior of an anisotropic two-dimensional flexible mechanical metamaterial when subjected to impact loading. We not only observe the propagation of elastic vector solitons with three components-two translational and one rotational-that are coupled together, but also very rich direction-dependent behaviors such as the formation of sound bullets and the separation of pulses into different solitary modes.

A modular strategy for distributed, embodied control of electronics-free soft robots.

Robots typically interact with their environments via feedback loops consisting of electronic sensors, microcontrollers, and actuators, which can be bulky and complex. Researchers have sought new strategies for achieving autonomous sensing and control in next-generation soft robots. We describe here an electronics-free approach for autonomous control of soft robots, whose compositional and structural features embody the sensing, control, and actuation feedback loop of their soft bodies. Specifically, we design multiple modular control units that are regulated by responsive materials such as liquid crystal elastomers. These modules enable the robot to sense and respond to different external stimuli (light, heat, and solvents), causing autonomous changes to the robot's trajectory. By combining multiple types of control modules, complex responses can be achieved, such as logical evaluations that require multiple events to occur in the environment before an action is performed. This framework for embodied control offers a new strategy toward autonomous soft robots that operate in uncertain or dynamic environments.

Cnoidal wave propagation in an elastic metamaterial.

Advances in fabrication techniques have led to a proliferation of studies on new mechanical metamaterials, particularly on elastic and linear phenomena (for example, their phonon spectrum and acoustic band gaps). More recently, there has been a growing interest in nonlinear wave phenomena in these systems, and particularly how geometric parameters affect the propagation of high-amplitude nonlinear waves. In this paper, we analytically, numerically, and experimentally demonstrate the propagation of cnoidal waves in an elastic architected material. This class of traveling waves constitutes a general family of nonlinear waves, which reduce to phonons and solitons under suitable limits. Although cnoidal waves were first discovered as solutions to the conservation laws for shallow water, they have subsequently appeared in contexts as diverse as ion plasmas and nonlinear optics, but have rarely been explored in elastic solids. We show that geometrically nonlinear deformations in architected soft elastic solids can result in cnoidal waves. Insights from our analysis will be critical to controlling the propagation of stress waves in advanced materials.

Acoustic Emission of Deformation Twinning in Magnesium.

The Acoustic Emission of deformation twinning in Magnesium is investigated in this article. Single crystal testing with combined full field deformation measurements, as well as polycrystalline testing inside the scanning electron microscope with simultaneous monitoring of texture evolution and twin nucleation were compared to testing at the laboratory scale with respect to recordings of Acoustic Emission activity. Single crystal testing revealed the formation of layered twin boundaries in areas of strain localization which was accompanied by distinct changes in the acoustic data. Testing inside the microscope directly showed twin nucleation, proliferation and growth as well as associated crystallographic reorientations. A post processing approach of the Acoustic Emission activity revealed the existence of a class of signals that appears in a strain range in which twinning is profuse, as validated by the in situ and ex situ microscopy observations. Features extracted from such activity were cross-correlated both with the available mechanical and microscopy data, as well as with the Acoustic Emission activity recorded at the laboratory scale for similarly prepared specimens. The overall approach demonstrates that the method of Acoustic Emission could provide real time volumetric information related to the activation of deformation twinning in Magnesium alloys, in spite of the complexity of the propagation phenomena, the possible activation of several deformation modes and the challenges posed by the sensing approach itself when applied in this type of materials evaluation approach.