Radioprotection issues in uraniferous minerals collections with reference to an actual case.

Our work investigated the radioprotection implications associated with the possession of a collection of uraniferous minerals. Considering different scenarios, we developed (and applied to an actual collection) specific formulas for radiation doses evaluation. We discussed the shielding necessary to reduce the gamma irradiation down to the required values. A mathematical model was developed to estimate the minimum air flow rate to reduce the radon air concentration below the reference values. The radiation risks associated to the handling of single specimens was also addressed, including hand skin irradiation and shielding capabilities of surgical lead gloves. Finally, we discussed the radiation risks associated to the exhibition of a single specimen. The results, compared to the safety standards of the EU Directive 13/59, show that the exhibition of uraniferous samples with activity of a few MBq do not need specific radioprotection requirements nor for the involved personnel nor for visitors.

Cosmogenic radionuclides in the Cavezzo meteorite: Gamma-ray measurement and detection efficiency simulations.

The Cavezzo meteorite was recovered on January 4th, 2020, just three days after the fall observed over Northern Italy by the all-sky cameras of the Italian PRISMA fireball network. Two specimens, weighing 3.1 g (F1) and 52.2 g (F2), were collected in the predicted strewn-field and the meteorite has been classified as an L5 anomalous chondrite. The gamma-activity of the F2 sample was measured at the Monte dei Cappuccini underground Research Station (Torino, Italy) with a large-volume HPGe-NaI(Tl) spectrometer. Thanks to the high efficiency, selectivity, and low background of the spectrometer, we were able to detect fifteen cosmogenic radioisotopes. The presence of nuclides with half-lives down to a few days (47Ca, 52Mn, and 48V) undoubtedly confirmed the recent fall of the sample. The very low activity of 44Ti and 60Co was revealed with a particular coincidence between the HPGe and NaI(Tl) detectors. To obtain the detection efficiency, we have simulated the response of the detector with the GEANT4 toolkit, once the spectrometer's dead layer thickness was estimated using standards of known activity. Moreover, the simulation of the Dhajala meteorite (H3/4 chondrite) measurement allowed us to verify that the self-absorption of the sample is correctly taken into account and validate our simulations. In this contribution, we focus on the coincidence optimization techniques and the detection efficiency computation.

ACTIVITY ESTIMATION WHEN DEALING WITH COLLECTIONS OF URANIFEROUS MINERALS.

The activity estimation of hand-size specimens of uraniferous minerals is not a trivial issue due to the manipulation difficulty caused by the emitted ionising radiation and the dependence of radiometric quantities from several parameters. Sample modelling requires approximations, leading to large uncertainty in the evaluation of the activity. In this work, a new procedure to evaluate uraniferous specimens activity, including a detailed description of measured parameters, the instrumentation and the mathematical formulation of the process, is presented. The proposed methodology takes into consideration sample size, ore composition and measured radiation. The procedure was used to measure the activity of a group of uraniferous mineral specimens belonging to Natural History Museum of the University of Florence, Italy. The experimental set-up was designed to reduce the measurement uncertainty. The aim of this work is to propose a methodology that can be easily applied to the specimens manipulation, conservation and exhibition.

Green and scalable synthesis of nanocrystalline kuramite.

The new generation of solar cells aims to overcome many of the issues created by silicon-based devices (e.g., decommissioning, flexibility and high-energy production costs). Due to the scarcity of the resources involved in the process and the need for the reduction of potential pollution, a greener approach to solar cell material production is required. Among others, the solvothermal approach for the synthesis of nanocrystalline Cu-Sn-S (CTS) materials fulfils all of these requirements. The material constraints must be considered, not only for the final product, but for the whole production process. Most works reporting the successful synthesis of CTS have employed surfactants, high pressure or noxious solvents. In this paper, we demonstrate the synthesis of nanocrystalline kuramite by means of a simpler, greener and scalable solvothermal synthesis. We exploited a multianalytical characterization approach (X-ray diffraction, extended X-ray absorption fine structure, field emission scanning electron microscopy, Raman spectroscopy and electronic microprobe analysis (EMPA)) to discriminate kuramite from other closely related polymorphs. Moreover, we confirmed the presence of structural defects due to a relevant antisite population.