RESUMO
Hypertension shows circadian blood pressure rhythms (day-night pattern) that urge the delivery of antihypertensive drugs at the right time in the desired levels. Thus, a bilayered core-in-cup buccoadhesive tablet was formulated that immediately releases olmesartan, to give a burst effect, and controls azelnidipine release, to prolong its therapeutic effect. The main challenge was the poor bioavailability of azelnidipine due to its poor aqueous solubility and first-pass effect. Hence, liquisolid compact buccoadhesive tablets were prepared to enhance solubility, dissolution profiles, and bypass the oral route. Two factorial designs were conducted to study the type and concentration effect of the mucoadhesive polymers on the dissolution and mucoadhesion of olmesartan and azelnidipine. Characterization studies were conducted regarding drug content, surface pH, water uptake, mucoadhesive strength, in vitro release, and ex vivo permeability. The core-in-cup olmesartan/azelnidipine buccoadhesive tablet showed similar release profile to the statistically optimized formulae of each drug. In vitro dissolution study showed enhanced release of azelnidipine than the directly compressed tablets, to comply with the regulatory standards of controlled release systems. In vivo pharmacokinetic study of olmesartan and azelnidipine conducted on human volunteers against Rezaltas® 10/8 mg tablet showed percentage relative bioavailability of 106.12 and 470.82%, respectively. Graphical Abstract.
Assuntos
Anti-Hipertensivos/administração & dosagem , Ácido Azetidinocarboxílico/análogos & derivados , Di-Hidropiridinas/administração & dosagem , Imidazóis/administração & dosagem , Tetrazóis/administração & dosagem , Adulto , Ácido Azetidinocarboxílico/administração & dosagem , Ácido Azetidinocarboxílico/química , Ácido Azetidinocarboxílico/farmacocinética , Disponibilidade Biológica , Preparações de Ação Retardada/química , Di-Hidropiridinas/química , Di-Hidropiridinas/farmacocinética , Composição de Medicamentos , Humanos , Imidazóis/química , Imidazóis/farmacocinética , Masculino , Comprimidos/química , Tetrazóis/química , Tetrazóis/farmacocinéticaRESUMO
Intranasal zaleplon solid dispersion was formulated to enhance the solubility, bioavailability and deliver an effective therapy. Zaleplon belongs to Class II drugs, and undergoes extensive first-pass metabolism after oral absorption exhibiting 30% bioavailability. A 23 full-factorial design was chosen for the investigation of solid dispersion formulations. The effects of different variables include drug to carrier ratio (1:1 and 1:2), carrier type (polyethylene glycol 4000 and poloxamer 407), and preparation method (solvent evaporation and freeze drying) on different dissolution parameters were studied. The dependent variables determined from the in vitro characterization and their constraints were set as follows: minimum mean dissolution time, maximum dissolution efficiency and maximum percentage release. Numerical optimization was performed according to the constraints set based on the utilization of desirability functions. Differential scanning calorimetry, infrared spectroscopy, X-ray diffraction and scanning electron microscopy were performed. Ex vivo estimation of nasal cytotoxicity and assessment of the γ-aminobutyric acid level in plasma and brain 1 h after nasal SD administration in rabbits compared to the oral market product were conducted. The selected ZP-SD, with a desirability 0.9, composed of poloxamer 407 at drug to carrier ratio 1:2 successfully enhanced the bioavailability showing 44% increase in GABA concentration than the marketed tablets.
Assuntos
Acetamidas/química , Acetamidas/farmacocinética , Poloxâmero/química , Polietilenoglicóis/química , Pirimidinas/química , Pirimidinas/farmacocinética , Comprimidos/química , Ácido gama-Aminobutírico/química , Animais , Encéfalo , Varredura Diferencial de Calorimetria , Interações Hidrofóbicas e Hidrofílicas , Microscopia Eletrônica de Varredura , Neurotransmissores , Coelhos , Solubilidade , Difração de Raios XRESUMO
Green nanotechnology utilizes the principles of green chemistry to formulate eco-friendly nanocarrier systems to mitigate patients and environment hazards. Raloxifene (RLX) demonstrates poor aqueous solubility (BCS class II) and low bioavailability, only 2% (extensive first-pass metabolism). The aim of this study is to enhance RLX solubility and bioavailability via development of novel solid dispersed multilayered core-sheath RLX-loaded nanofibers (RLX-NFs) without the involvement of organic solvents. A modified emulsion electrospinning technique was developed. Electrospinning of an RLX-nanoemulsion (RLX-NE) with polymer solution (poly vinyl alcohol (PVA), hydroxypropyl methylcellulose (HPMC), and chitosan (CS) in different volume ratios (1:9, 2:8, and 4:6) using D-optimal response surface methodology was adopted. In vitro characterization of RLX-loaded NFs was performed; scanning electron microscope (SEM), thermal analysis, drug content, release studies, and bioadhesion potential. The optimum NFs formula was evaluated for morphology using high-resolution transmission electron microscopy (HRTEM), and ex vivo drug permeation. The superiority of E2 (comprising RLX-NE and PVA (2:8)) over other NF formulae was statistically observed with respect to Q60 (56.048%), Q240 (94.612%), fiber size (594.678 nm), mucoadhesion time 24 h, flux (5.51 µg/cm2/h), and enhancement ratio (2.12). RLX pharmacokinetics parameters were evaluated in rabbits following buccal application of NF formula E2, relative to RLX oral dispersion. E2 showed significantly higher Cmax (53.18 ± 4.56 ng/mL), and relative bioavailability (≈2.29-fold).
RESUMO
AIM: Agomelatine (AGM) is the first melatonergic antidepressant. It suffers from low oral bioavailability (<5%) due to extensive hepatic metabolism. The current work aimed to develop an alternative AGM-loaded invasomes to enhance transdermal drug bioavailability. METHODOLOGY: AGM-loaded invasomes were developed using two drug: lipid ratios (1:10 or 1:7.5), four terpene types (limonene, cineole, fenchone or citral) and two terpene concentrations (0.75% or 1.5%, w/v). They were characterized for drug entrapment efficiency (EE%), particle size (PS), zeta potential (ZP) and drug released percentages after 0.5h (Q0.5h) and 8h (Q8h). The optimum invasomes (I1, I2 and I4) were evaluated for morphology, drug-crystallinity, and ex-vivo drug flux. The variables influencing sonophoresis of the best achieved invasomal gel system (I2) were optimized including, ultrasound frequency (low, LFU or high, HFU), mode (pulsed or continuous), application period (10 min or 15 min) and duty cycle (50% or 100%). AGM pharmacokinetics were evaluated in rabbits following transdermal application of I2-LFU-C4 system, relative to AGM oral dispersion. RESULTS: The superiority of I2 invasomes [comprising AGM and phosphatidylcholine (1:10) and limonene (1.5% w/v)] was statistically revealed with respect to EE% (78.6%), PS (313 nm), ZP (-64 mV), Q0.5h (30.1%), Q8h (92%), flux (10.79 µg/cm2/h) and enhancement ratio (4.83). The optimum sonophoresis conditions involved application of LFU in the continuous mode for 15 min at a 100% duty cycle (I2-LFU-C4 system). The latter system showed significantly higher Cmax, and relative bioavailability (≈ 7.25 folds) and a similar Tmax (0.5 h). CONCLUSION: I2-LFU-C4 is a promising transdermal system for AGM.
Assuntos
Acetamidas/administração & dosagem , Acetamidas/farmacocinética , Pele/metabolismo , Ondas Ultrassônicas , Administração Cutânea , Animais , Disponibilidade Biológica , Liberação Controlada de Fármacos , Lipossomos , Tamanho da Partícula , Coelhos , Ratos , Ratos WistarRESUMO
This study aims to investigate factors affecting weakly basic drugs liposomal systems. Resolution V fractional factorial design (2V5-1) is used as an example of screening designs that would better be used as a wise step before proceeding with detailed factors effects or optimization studies. Five factors probable to affect liposomal systems of weakly basic drugs were investigated using Amisulpride as a model drug. Factors studied were; A: Preparation technique B: Phosphatidyl choline (PhC) amount (mg) C: Cholesterol: PhC molar ratio, D: Hydration volume (ml) and E: Sonication type. Levels investigated were; Ammonium sulphate-pH gradient technique or Transmembrane zinc chelation-pH gradient technique, 200 or 400â¯mg, 0 or 0.5, 10 or 20â¯ml and bath or probe sonication for A, B, C, D and E respectively. Responses measured were Particle size (PS) (nm), Zeta potential (ZP) (mV) and Entrapment efficiency percent (EE%). Ion selective electrode was used as a novel method for measuring unentrapped drug concentration and calculating entrapment efficiency without the need for liposomal separation. Factors mainly affecting the studied responses were Cholesterol: PhC ratio and hydration volume for PS, preparation technique for ZP and preparation technique and hydration volume for EE%. The applied 2V5-1 design enabled the use of only 16 trial combinations for screening the influence of five factors on weakly basic drugs liposomal systems. This clarifies the value of the use of screening experiments before extensive investigation of certain factors in detailed optimization studies.
Assuntos
Química Farmacêutica/métodos , Lipossomos/química , Amissulprida , Sulfato de Amônio/química , Colesterol/química , Concentração de Íons de Hidrogênio , Fosfatidilcolinas/química , Sulpirida/análogos & derivados , Sulpirida/química , Zinco/químicaRESUMO
Being one of the highly effective drugs in treatment of Alzheimer's disease, Rivastigmine brain targeting is highly demandable, therefore liposomal dispersion of Rivastigmine was prepared containing 2 mol% PEG-DSPE added to Lecithin, Didecyldimethyl ammonium bromide (DDAB), Tween 80 in 1:0.02:0.25 molar ratio. A major challenge during the preparation of liposomes is maintaining a stable formulation, therefore the aim of our study was to increase liposomal stability by addition of DDAB to give an electrostatic stability and PEG-DSPE to increase stability by steric hindrance, yielding what we called an electrosteric stealth (ESS) liposomes. A medium nano-sized liposome (478 ± 4.94 nm) with a nearly neutral zeta potential (ZP, -8 ± 0.2 mV) and an entrapment efficiency percentage of 48 ± 6.22 was prepared. Stability studies showed no major alteration after three months storage period concerning particle size, polydispersity index, ZP, entrapment efficiency and in vitro release study confirming the successful formation of a stable liposomes. No histopathological alteration was recorded for ESS liposomes of the sheep nasal mucosa. While ESS liposomes showed higher % of drug permeating through the sheep nasal mucosa (48.6%) than the drug solution (28.7%). On completing the in vivo pharmacokinetic studies of 36 rabbits showed 424.2% relative bioavailability of the mean plasma levels of the formula ESS compared to that of RHT intranasal solution and 486% relative bioavailability of the mean brain levels.