Removal of Pb ions using green Co3O4 nanoparticles: Simulation, modeling, adsorption, and biological studies.

Chemical co-precipitation synthesized novel and green cobalt-oxide nanoparticles (Co3O4-NPs) utilizing cobalt nitrate as cobalt precursors. FTIR, Raman, scanning electron microscopy, UV visible, X-ray powder diffraction, and BET was used to analyze the surface characteristics, composition, and morphology, of the NPs. These green Co3O4-NPs were employed to remove Pb ions from simulated wastewater solutions at various pH, adsorbate, temperature, and dose concentrations. At dose 20 mg/L, pH 6.0, 20 mg/L (Pb(II) solution, 25 °C of temperature, and 45 min for equilibrium, nearly 99.44% of Pb ions were removed. To evaluate the kinetic data, four different kinetic equations were used. The data fit the Elovich rate equation better than the other three models. Thermodynamic and isothermal studies were also evaluated, and the maximum adsorption capacity of 450.45 mg/g was observed at 298.15 K. 0.1 M HNO3, and 0.1 HCl were used to regenerate used Co3O4-NPs. Simulation results show the strong correlation of the Co atom in the Co3O4-NPs generates active delocalized surface states, which are energetically most favorable for heavy metal (Pb ions) adsorption and removal, supporting the experimental outcomes. In concluding remarks, green Co3O4-NPs can also be used as an adsorbent to remove Pb ions from wastewater bodies.

Applicability of new sustainable and efficient green metal-based nanoparticles for removal of Cr(VI): Adsorption anti-microbial, and DFT studies.

Artemisia absinthium leaves were utilized as a reducing agent for green synthesis of Zinc oxide nanoparticles (particle size 17 nm). Synthesized green-ZnO (g-ZnO) were characterized by SEM/EDX, FTIR, XRD, UV, and BET analyses and then further used as an adsorbent to remove Cr(VI) ions from simulated wastewater. Optimal pH, temperature and adsorbent dosage were determined through batch mode studies. High removal efficiency and adsorption capacity were observed at pH 4, 0.25 g L-1 dosage, and 25 mg L-1 concentration of Cr(VI). Experimental data were modelled with different adsorption kinetics (Elovich model, PFO, PSO, IDP model) and isotherms (Langmuir, Freundlich, and Temkin), and it was found the adsorption process was well fitted to Langmuir with an R2 value greater than>0.99. Computational calculation showed that the g-ZnO nanoparticles became ∼14 times more dynamic with delocalized surface states making them a relevant platform to adsorb Cr with greater work function compatibility supporting the experimental findings. The Qmax adsorption capacity of g-ZnO was 315.46 mg g-1 from Langmuir calculations. Thermodynamic calculations reveal that the Cr (VI) adsorption process was spontaneous and endothermic, with a positive ΔS value representing the disorder at the solid-solution interface during the adsorption. In addition, the present study has demonstrated that these g-ZnO nanoparticles show strong antibacterial activities against P. aeruginosa (MTCC 1688) and E. coli (MTCC 1687). Also, the novel g-ZnO adsorbent capacity to remove Cr(VI) from simulated water revealed that it could be reused at least six times with higher removal rates during regeneration experiments. The results obtained from adsorption and antimicrobial activities suggest that g-ZnO nanoparticles could be used effectively in real-time wastewater and agricultural safety applications.

Novel and sustainable green sulfur-doped carbon nanospheres via hydrothermal process for Cd (II) ion removal.

Herein, the synthesis, characterization, and adsorption performance of a novel green sulfur-doped carbon nanosphere (S-CNs) is studied to eliminate Cd (II) ions from water effectively. S-CNs were characterized using different techniques including Raman spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDX), , Brunauer-Emmett-Teller (BET) specific surface area analysis and Fourier transform infrared spectrophotometry (FT-IR), were performed. The efficient adsorption of the Cd (II) ions onto S-CNs strongly depended on pH, initial concentration of Cd (II) ions, S-CNs dosage, and temperature. Four isotherm models (Langmuir, Freundlich, Temkin & Redlich Peterson) were tested for modeling. Out of four, Langmuir showed more applicability than the other three models, with a Qmax value of 242.72 mg/g. Kinetic modeling studies suggest a superior fit of the obtained experimental data with the Elovich equation (linear) and pseudo-second-order (non-linear) rather than other linear and non-linear models. Data obtained from thermodynamic modeling indicates that using S-CNs for Cd (II) ions adsorption is a spontaneous and endothermic . The current work recommends using better and recyclable S-CNs to uptake excess Cd (II) ions.