Soft tissue phenotype modification predicts gingival margin long-term (10-year) stability: Longitudinal analysis of six randomized clinical trials.

AIM: To assess the prognostic value of soft tissue phenotype modification following root coverage procedures for predicting the long-term (10-year) behaviour of the gingival margin. MATERIALS AND METHODS: Participants from six randomized clinical trials on root coverage procedures at the University of Michigan were re-invited for a longitudinal evaluation. Clinical measurements were obtained by two calibrated examiners. A data-driven approach to model selection with Akaike information criterion (AIC) was carried out via multilevel regression analyses and partial regression plotting for changes in the level of the gingival margin over time and interactions with the early (6-month) results of soft tissue phenotypic modification. RESULTS: One-hundred and fifty-seven treated sites in 83 patients were re-assessed at the long-term recall. AIC-driven model selection and regression analyses demonstrated that 6-month keratinized tissue width (KTW) and gingival thickness (GT) influenced the trajectory of the gingival margin similarly in a concave manner; however, GT was the driving determinant that predicted significantly less relapse in the treatments, with stability of the treated gingival margin obtained beyond values of 1.46 mm. CONCLUSIONS: Among a compliant patient cohort, irrespective of the rendered therapy, the presence of at least 1.5 mm KTW and 1.46 mm GT was correlated with the long-term stability of the gingival margin.

Biomaterial and biomechanical considerations to prevent risks in implant therapy.

This paper is aimed to present a biomaterials perspective in implant therapy that fosters improved bone response and long-term biomechanical competence from surgical instrumentation to final prosthetic rehabilitation. Strategies to develop implant surface texturing will be presented and their role as an ad hoc treatment discussed in light of the interplay between surgical instrumentation and implant macrogeometric configuration. Evidence from human retrieved implants in service for several years and from in vivo studies will be used to show how the interplay between surgical instrumentation and implant macrogeometry design affect osseointegration healing pathways, and bone morphologic and long-term mechanical properties. Also, the planning of implant-supported prosthetic rehabilitations targeted at long-term performance will be appraised from a standpoint where personal preferences (eg, cementing or screwing a prosthesis) can very often fail to deliver the best patient care. Lastly, the acknowledgement that every rehabilitation will have its strength degraded over time once in function will be highlighted, since the potential occurrence of even minor failures is rarely presented to patients prior to treatment.

Alveolar Ridge Expansion: Comparison of Osseodensification and Conventional Osteotome Techniques.

OBJECTIVE: The aim of this in vivo study is to compare the osseointegration of endosteal implants placed in atrophic mandibular alveolar ridges with alveolar ridge expansion surgical protocol via an experimental osseodensification drilling versus conventional osteotome technique. METHODS: Twelve endosteal implants, 4 mm × 13 mm, were placed in porcine models in horizontally atrophic mandibular ridges subsequent to prior extraction of premolars. Implants were placed with osseodensification drilling technique as the experimental group (n = 6) and osteotome site preparation as the control group (n = 6). After 4 weeks of healing, samples were retrieved and stained with Stevenel's Blue and Van Gieson's Picro Fuschin for histologic evaluation. Quantitative analysis via bone-to-implant contact (BIC%) and bone area fraction occupancy (BAFO%) were obtained as mean values with corresponding 95% confidence interval. A significant omnibus test, post-hoc comparison of the 2 drilling techniques' mean values was accomplished using a pooled estimate of the standard error with P-value set at 0.05. RESULTS: The mean BIC% value was approximately 62.5% in the osseodensification group, and 31.4% in the regular instrumentation group. Statistical analysis showed a significant effect of the drilling technique (P = 0.018). There was no statistical difference in BAFO as a function of drilling technique (P = 0.198). CONCLUSION: The combined osseodensification drilling-alveolar ridge expansion technique showed increased evidence of osseointegration and implant primary stability from a histologic and biomechanical standpoint, respectively. Future studies will focus on expanding the sample size as well as the timeline of the study to allow investigation of long-term prognosis of this novel technique.

Alveolar Ridge Expansion by Osseodensification-Mediated Plastic Deformation and Compaction Autografting: A Multicenter Retrospective Study.

INTRODUCTION: Osseodensification preserves bone bulk, facilitates compaction autografting, and deforms trabecular bone in an outward strain, which result in alveolar ridge plastic expansion. The aim of this retrospective study was to evaluate ridge expansion after osseodensification. MATERIALS AND METHODS: Patients treated with implant placement through osseodensification were evaluated. The alveolar ridge width was measured at the level of the crest and 10 mm apical to the crest before and after osseodensification. Insertion torque and implant stability quotient (ISQ) values were recorded at implant placements. Expansion values were grouped into the following 3 groups according to the initial alveolar ridge width: group 1: 3 to 4 mm (n = 9), group 2: 5 to 6 mm (n = 12), and group 3: 7 to 8 mm (n = 7). RESULTS: Twenty-one patients who received 28 implants were included. Twenty-six implants were integrated, resulting in a survival rate of 92.8%. There was a significant difference in the mean expansion value at the coronal aspect of the ridge between group 1, group 2, and group 3 (2.83 ± 0.66 mm, 1.5 ± 0.97 mm, 1.14 ± 0.89 mm, P < 0.05). The mean torque and ISQ values were 61.2 ± 13.9 Ncm and 77 ± 3.74. CONCLUSION: Osseodensification can alter ridge dimensions and allow for ridge expansion. Greater expansion can be expected at the crest in narrow ridges with adequate trabecular bone volume.

Ridge Architecture Preservation Following Minimally Traumatic Exodontia Techniques and Guided Tissue Regeneration.

OBJECTIVE: To compare hard-tissue healing after 3 exodontia approaches. MATERIALS AND METHODS: Premolars of dogs were extracted: (1) flapless, (2) flap, and (3) flap + socket coverage with polytetrafluoroethylene (dPTFE) nonresorbable membrane (flap + dPTFE). Animals were euthanized at 1 and 4 weeks. Amount of bone formation within socket and socket total area were measured. RESULTS: Amount of bone formation revealed significant difference between 1 and 4 weeks; however, there was no differences among groups. Socket total area decreased after 4 weeks, and the flap + dPTFE group showed significantly higher socket total area. As a function of time and group, flap + dPTFE 4 weeks presented similar socket total area values relative to flap + dPTFE at 1 week, and significantly higher socket total area than flapless and flap. The histological sections revealed almost no bone formation within socket after 1 week, which increased for all groups at 4 weeks. CONCLUSION: Socket coverage with polytetrafluoroethylene (dPTFE) membrane showed to effectively preserve bone architecture. Bone formation within sockets was not influenced by tooth extraction technique.

Early Healing Evaluation of Commercially Pure Titanium and Ti-6Al-4V Presenting Similar Surface Texture: An In Vivo Study.

OBJECTIVE: This study evaluated the osseointegration of commercially pure titanium (Ti) grade-2 (G2) and Ti-6Al-4V alloy (G5) implants with the same geometry and surface treatment. MATERIALS AND METHODS: Thirty-six dental implants with a grit-blasted acid-etched surface were used (n = 18, each). Two implants, one per group, were installed in each subject, in the radius diaphysis (n = 18 beagle dogs), with interchanged fixture position (proximal-distal) between animals for a balanced number of devices per group and time in vivo (1, 3, and 6 weeks). RESULTS: Similar topographical parameters between G2 and G5 were observed for average surface roughness, root mean square, developed surface ratio, maximum height of surface, and density of summits. Removal torque was significantly higher for G5 than for G2. No differences were observed for bone-to-implant contact and bone-area-fraction occupancy. Removal torque significantly increased with time for both groups. At 1 week, new bone formation in direct contact with the implant surface and osteogenic tissue migration was observed with an increase in woven bone formation at 3 weeks followed by the onset of lamellar bone formation at 6 weeks. CONCLUSION: Although both surfaces were biocompatible and osteoconductive, increased removal torque was observed for Ti-6Al-4V compared with commercially pure Ti implants.

The Effect of Osteotomy Dimension on Implant Insertion Torque, Healing Mode, and Osseointegration Indicators: A Study in Dogs.

PURPOSE: This study investigated the effect of the osteotomy diameter for implant placement torque and its effect on the osseointegration. MATERIALS AND METHODS: Eight male beagle dogs received 48 implants (3.75 mm × 10 mm) in their right and left radius, 3 implants per side and allowed to heal for 3 weeks. Three experimental groups were evaluated. Group 1: implant with an undersized osteotomy of 3.0 mm; group 2: osteotomy of 3.25 mm, and group 3: osteotomy of 3.5 mm. The insertion torque was recorded for all implants. Histological sectioning and histometric analysis were performed evaluating bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO). RESULTS: Implants of group 1 presented statistically higher insertion torque than those of groups 2 and 3 (P < 0.01). No differences in BIC or BAFO were observed between the groups. From a morphologic standpoint, substantial deviations in healing mode were observed between groups. CONCLUSION: Based on the present methodology, the experimental alterations of surgical technic can be clinically used with no detrimental effect over the osseointegration process.

Osseointegration of Plateau Root Form Implants: Unique Healing Pathway Leading to Haversian-Like Long-Term Morphology.

Endosteal dental implants have been utilized as anchors for dental and orthopedic rehabilitations for decades with one of the highest treatment success rates in medicine. Such success is due to the phenomenon of osseointegration where after the implant surgical placement, bone healing results into an intimate contact between bone and implant surface. While osseointegration is an established phenomenon, the route which osseointegration occurs around endosteal implants is related to various implant design factors including surgical instrumentation and implant macro, micro, and nanometer scale geometry. In an implant system where void spaces (healing chambers) are present between the implant and bone immediately after placement, its inherent bone healing pathway results in unique opportunities to accelerate the osseointegration phenomenon at the short-term and its maintenance on the long-term through a haversian-like bone morphology and mechanical properties.

Optimizing esthetic zone periodontal regeneration in a 1-2-wall infrabony defect using recombinant human platelet-derived growth factor BB and ß-tricalcium phosphate: A case report.

OBJECTIVE: Periodontitis is an inflammatory condition induced by subgingival bacterial dysbiosis, resulting in inflammatory-mediated destruction of tooth-supporting structures, potentially leading to the formation of infrabony defects. This case report describes the treatment of a patient who presented with a combination 1-2-wall defect on tooth 21. To maintain the residual periodontal attachment and minimize esthetic consequences, a regenerative approach was performed using recombinant human platelet-derived growth factor-BB (rh-PDGF-BB) and ß-tricalcium phosphate (ß-TCP). MATERIALS AND METHODS: At the time of postscaling/root planing reevaluation, a 34-year-old Asian male initially diagnosed with molar/incisor pattern stage III grade C periodontitis exhibited a 6-mm residual probing depth on the mesiopalatal aspect of tooth 21. Periodontal regenerative surgery was performed using rh-PDGF-BB with ß-TCP, without the use of a membrane. RESULTS: At the 1-year follow-up, a significant reduction in probing depth and radiographic evidence of bone fill were observed. Additionally, re-entry surgery for implant placement at site tooth 23 confirmed bone fill in the defect on tooth 21. CONCLUSION: These results demonstrate the efficacy of rh-PDGF-BB with ß-TCP in enhancing periodontal regeneration and support its use as a treatment option when treating poorly contained infrabony defects in the esthetic zone.

Maintaining tooth-implant distance following root amputation of a compromised adjacent tooth: A clinical case report.

BACKGROUND: Edentulous sites with limited horizontal tooth-implant distance pose a challenge to clinicians. This case report describes root amputation of an adjacent compromised molar to maintain an optimal tooth-implant distance METHODS AND RESULTS: A 41-year-old female was referred for extraction and implant placement to replace her left, maxillary second premolar (#13), which had been diagnosed with a vertical root fracture. Extraction and ridge preservation of #13 was completed without complication. The 4-month postsurgical clinical examination revealed a narrow mesial-distal distance (5.69 mm) of the edentulous space (#13), which was influenced by the degree of divergence of the mesial buccal root of tooth #14. Cone-beam computed tomography (CBCT) analysis verified a periapical lesion on the mesial-buccal root of tooth #14. The amputation of the endodontically compromised mesial-buccal root of #14 was treatment planned to provide space and facilitate placement of a standard diameter implant without compromising the implant or adjacent teeth. Crestal bone levels were verified and maintained at the 1 year postoperative follow-up. CONCLUSION: The findings of the case report demonstrate how root amputation of a compromised molar is an alternative solution for managing spatial limitations in contemporary implant dentistry. More studies are required to assess the reliability and long-term success of this approach. KEY POINTS: Why is this case new information? There is insufficient evidence on the long-term efficacy of narrow-diameter implants. Clinical treatment guidelines are not sufficiently available. This paper presents an alternative approach to managing a specific scenario where mesial-distance distance is limited using root amputation of an adjacent compromised tooth. What are the keys to successful management of this case? Comprehensive diagnosis and stringent case selection Multidisciplinary treatment planning Evidence-based decision making What are the primary limitations to success in this case? Very specific clinical application; adjacent compromised tooth Long-term follow up is required.

The wingspan suspension approach: A modified semilunar technique for multiple areas of recession.

BACKGROUND: Gingival recession can be considered an undesirable condition that results in the exposure of the root surface. There are many techniques that can be employed to address gingival recession; however, they frequently involve a second surgical site. Other approaches have been introduced in the past to address this concern, and this case study discusses the use of a modified technique to achieve root coverage. METHODS: A patient presented to the periodontics clinic with concerns regarding gingival recession. A modification to the semilunar technique was employed to address the recession, whereas double sling sutures were utilized to maintain the coronal repositioning of the flap. RESULTS: Maxillary central incisors initially presented with 2-3 mm of facial recession and root coverage was achieved by use of a modified surgical semilunar approach. No rebound noted over a 6-month period, newly established gingival margin deemed clinically stable. CONCLUSIONS: This case study provides an alternative to addressing gingival recession in the maxillary anterior region, when <3 mm of recession is noted. Avoidance of a second surgical procedure and/or donor site is of particular benefit, as well as maintenance of the blood supply. KEY POINTS: Why is this case new information? There is insufficient evidence on the use of a modified wingspan incision design Phenotype modification with elimination of a second surgical site is most ideal for the patient. What are the keys to successful management of this case? Comprehensive diagnosis and proper case selection Meticulous flap management and adequate release to allow for repositioning without tension Appropriate use ofsuture and suturing technique. What are the primary limitations to success in this case? Thin periodontal phenotype Poor oral hygiene and plaque accumulation postoperatively Loss to follow-up.

Immediate single-tooth replacement with acellular dermal matrix allogeneic bone and ossifying collagen scaffold: A case series.

The pursuit of predictable implant success in the aesthetic zone continues as technology develops. Creating stable marginal bone and an optimal peri-implant mucosal environment is the foundation for a long-term healthy and aesthetic implant treatment outcome. Tissue stability is dependent on multiple factors, including the regenerative materials used to create the peri-implant supporting tissues and maintain the tissue volume. The present study aims to describe a technique that combines a flapless approach to extract hopeless teeth in the aesthetic zone and implant insertion using an acellular dermal matrix placed to contain the coronal aspect of an innovative ossifying collagen scaffold designed to promote neoformation of vital native bone. This technique combines a minimally invasive approach with the application of a novel biomaterial that offers stable augmentation of the gingival thickness as well as bone fill in the facial gap, the space between the implant and the buccal plate, to ensure predictable aesthetic results. A collection of cases are presented to demonstrate the surgical technique and the situation over a follow-up period of 22 months. Pre- and post-treatment CBCT imaging were utilised to quantify the stability or changes noted in the alveolar bone, and pre-and post-treatment intraoral scanning were used for the same purpose in the peri-implant phenotype. This case series presents stable and aesthetic clinical outcomes evaluated through digital assessment.

Osseodensification versus lateral window technique for sinus floor elevation with simultaneous implant placement: A randomized clinical trial on patient-reported outcome measures.

OBJECTIVES: To compare patient-reported outcome measures and additional surgical outcomes after sinus floor elevation (SFE) with osseodensification (OD) versus lateral window (LW), both with simultaneous implant placement. MATERIALS AND METHODS: Twenty participants requiring single-implant rehabilitation with residual bone height (RBH) ≤4 mm were enrolled. Pain experience, quality of life (QoL) via the Oral Health Impact Profile-14 (OHIP-14), analgesics intake, and other symptoms were self-reported for a week on a daily basis. Surgery duration, complications, and implant stability quotient at baseline (ISQ T0 ) and after 6 months (ISQ T6 ) were registered. Participants were followed up for 1 year. RESULTS: From Day 0 (day of surgery) to Day 3, pain experience was significantly lower (p < 0.05) in the OD group. OHIP-14 score was significantly lower (p < 0.05) in the OD group on all postoperative days, except on Day 5. Average analgesics intake was significantly lower (p < 0.001) in the OD group. Surgery mean duration was significantly higher (p < 0.001) in LW compared to OD (71.1 ± 10.4 vs. 32.9 ± 5.3 min). After osseointegration period, all implants were successfully restored with screw-retained crowns. CONCLUSIONS: Within the limitations of this study, it can be concluded that OD and LW techniques were similarly effective in SFE with simultaneous implant placement when RBH ≤ 4 mm. However, OD significantly outperformed LW in pain experience, impact on self-perceived QoL, surgery duration, postoperative edema, and analgesics intake.

Three-dimensional printing of the human lung pleural cavity model for PDT malignant mesothelioma.

OBJECTIVE: The primary aim was to investigate emerging 3D printing and optical acquisition technologies to refine and enhance photodynamic therapy (PDT) dosimetry in the management of malignant pleural mesothelioma (MPM). MATERIALS AND METHODS: A rigorous digital reconstruction of the pleural lung cavity was conducted utilizing 3D printing and optical scanning methodologies. These reconstructions were systematically assessed against CT-derived data to ascertain their accuracy in representing critical anatomic features and post-resection topographical variations. RESULTS: The resulting reconstructions excelled in their anatomical precision, proving instrumental translation for precise dosimetry calculations for PDT. Validation against CT data confirmed the utility of these models not only for enhancing therapeutic planning but also as critical tools for educational and calibration purposes. CONCLUSION: The research outlined a successful protocol for the precise calculation of light distribution within the complex environment of the pleural cavity, marking a substantive advance in the application of PDT for MPM. This work holds significant promise for individualizing patient care, minimizing collateral radiation exposure, and improving the overall efficiency of MPM treatments.

A novel investigational preclinical model to assess fluence rate for dental oral craniofacial tissues.

OBJECTIVE: Photodynamic Therapy (PDT) and Photobiomodulation (PBM) are recognized for their potential in treating head and neck conditions. The heterogeneity of human tissue optical properties presents a challenge for effective dosimetry. The porcine mandible cadaver serves as an excellent model and has several similarities to human tissues of the dental oral craniofacial complex. This study aims to validate a novel modeling system that will help refine PDT and PBM dosimetry for the head and neck region. METHODS AND MATERIALS: Light transmission was analyzed through several tissue combinations at distances of 2 mm to 10 mm. Maximum light fluence rates (mW/cm2) were compared across tissue types to reveal the effects of tissue heterogeneity. RESULTS: The study revealed that light fluence is affected by tissue composition, with dentin/enamel showing reduced transmission and soft tissue regions exhibiting elevated values. The porcine model has proven to be efficient in mimicking human tissue responses to light, enabling the potential to optimize future protocols. CONCLUSION: The porcine mandible cadaver is a novel model to understand the complex interactions between light and tissue. This study provides a foundation for future investigations into dosimetry optimization for PDT and PBM.

Clinical Comparison of Vascular Bleeding Time Creep Between Osseodensification and Conventional Drilling of Implant Osteotomy Sites.

This study compared the onset of vascular bleeding between osseodensification and conventional drilling of implant osteotomy sites. Patients with type III trabecular bone requiring a single missing tooth replacement were included and allocated to either Group A (test) or Group B (control). In Group A, the osseodensification group (OD), an implant osteotomy was carried out using Densah Burs (Versah) in the counterclockwise direction; in Group B, the standard drilling group (SD), Densah Burs were run in the clockwise direction. An endoscope was introduced into the osteotomy to visualize and measure the time taken for initiation of bleeding (BI) and for blood to fill the osteotomy site (BF). A total of 40 osteotomy sites (23 in the maxilla and 17 in the mandible) were included in this cross-sectional study. The mean age of study participants was 50.1 ± 8.28 years. The mean BI time for Groups A and B was 18.54 ± 2.48 seconds and 16.89 ± 1.92 seconds, respectively (P = .02); the mean BF time for Groups A and B was 41.92 ± 3.19 seconds and 37.95 ± 2.73 seconds, respectively (P < .001). Osseodensification does not seem to negatively affect or induce loss of bone vascularity. Clinicians should note that osseodensified sites might take slightly longer to fill with blood following an osteotomy.

Living cellular constructs for keratinized tissue augmentation: A 13-year follow-up from a split-mouth randomized, controlled, clinical trial.

BACKGROUND: A 13-year follow-up was conducted of a short-term investigation of the use of living cellular construct (LCC) versus free gingival graft (FGG) for keratinized tissue width (KTW) augmentation in natural dentition, to evaluate the long-term outcomes and assess the changes occurring since the end of the original 6-month study. METHODS: Twenty-four subjects out of the original 29 enrolled participants were available at the 13-year follow-up. The primary endpoint was the number of sites demonstrating stable clinical outcomes from 6 months to 13 years (defined as KTW gain, stability, or ≤0.5 mm of KTW loss, together with reduction, stability, or increase of probing depth, and recession depth [REC] ≤0.5 mm). Secondary outcomes included the assessment of KTW, attached gingiva width (AGW), REC, clinical attachment level, esthetics, and patient-reported outcomes at the 13-year visit, assessing the changes from baseline to 6 months. RESULTS: Nine sites per group (42.9%) were found to have maintained stable (≤0.5 mm or improved) clinical outcomes from 6 months to 13 years. No significant differences were observed for the clinical parameters between LCC and FGG from 6 months to 13 years. However, the longitudinal mixed model analysis showed that FGG delivered significantly better clinical outcomes over 13 years (p < 0.01). LCC-treated sites exhibited superior esthetic outcomes compared to FGG-treated sites at 6 months and 13 years (p < 0.01). Patient-evaluated esthetics were significantly higher for LCC over FGG (p < 0.01). Patient overall treatment preference was also in favor of LCC (p < 0.01). CONCLUSIONS: A similar stability of the treatment outcomes from 6 months to 13 years was found for LCC- and FGG-treated sites, with both approaches shown to be effective in augmenting KTW and AGW. However, superior clinical outcomes were found for FGG over 13 years, while LCC was associated with better esthetics and patient-reported outcomes than FGG.

Facially Driven Digital Workflow for Maxillary and Mandibular Milled Implant- Retained Overdentures Using Two Different Unsplinted Attachment Systems: Case Report.

Unsplinted attachment systems for implant overdentures offer various benefits for edentulous patients, including cost-effectiveness, enhanced cleansability, and less need for manual dexterity. This article describes a facially driven digital workflow for fabricating a maxillary implant overdenture retained by conometric-style attachments (Atlantis® Conus) with a palateless design opposing an implant overdenture retained by standard attachments (LOCATOR®). This procedure provides a predictable and accurate technique to digitally scan the master casts with wax rims for articulation and to guide the digital teeth design set-up for a predictable esthetic outcome. The removable prosthesis workflow involves virtual teeth set-up, a 3D-printed trial denture, a milled definitive prosthesis, and intraoral pick-up for both unsplinted attachment systems. The clinical and laboratory steps are described.

The Influence of Implant Design Features on the Bone Healing Pathway: An Experimental Study in Sheep.

This study evaluated how implant design features influence osseointegration. Two implant macrogeometries and surface treatments were evaluated: (1) progressive buttress threads with an SLActive surface (SLActive/BL), and (2) inner and outer trapezoidal threads with a nanohydroxyapatite coating over a dual acid-etched surface (Nano/U). Implants were placed in the right ilium of 12 sheep, and histologic and -metric analyses were conducted after 12 weeks. Percentages of bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) within the threads were quantified. Histologically, the SLActive/BL group showed greater and more intimate BIC than the Nano/U group. In contrast, Nano/U group depicted woven bone formation within the healing chambers, between the osteotomy wall and implant threads, and bone remodeling was evident at the outer thread tip. Significantly higher BAFO was seen in the Nano/U group than the SLActive/BL group at 12 weeks (P < .042). Different implant design features influenced the osseointegration pathway, supporting further investigations to describe the differences and clinical performance.

Analysis of the influence of residual alveolar bone height on sinus augmentation outcomes.

INTRODUCTION: Maxillary sinus augmentation is a predictable implant site development technique for posterior atrophic maxillary ridges. However, graft consolidation requires adequate angiogenesis and migration of osteogenic cells from native bone. Therefore, the amount of residual bone height (RBH) may play a role in the rate of graft maturation. The purpose of this study was to analyze the influence of RBH in the histomorphometric outcomes of maxillary sinus augmentation procedures. MATERIAL AND METHODS: Patients in need of sinus augmentation were recruited for the study. Customized radiographic guides were fabricated and a cone-beam computerized tomography scan was obtained at baseline. Two examiners measured RBH on the scans at the locations marked by the radiographic guide. Sinus grafting was performed by a lateral window approach using a particulated mineralized allograft. Patients were followed up for 6 months. At the time of implant placement, bone core biopsies were harvested using the radiographic guide, which was converted into a surgical guide. Samples were histomorphometrically analyzed. Proportion of vital bone (%VB), remaining allograft particles (%RA), and non-mineralized tissue (%NMT) were quantified. Categorical analysis of correlation of RBH (<4 or ≥4 mm) with%VB and%RA was performed using a statistical model. RESULTS: Twenty-one patients underwent sinus augmentation for a total of 21 sinuses. One patient developed an infection after grafting and was excluded. Histomorphometric analysis revealed that mean%VB was 20.47 ± 18.25, mean %RA was 29.04 ± 24.94, and average %NMT was 50.47 ± 12.76. No significant correlation between RBH and %VB (r = 0.016; P = 0.951), and RBH and % (r = 0.009; P = 0.971) was found. Similarly, categorical analysis of correlation showed no statistical significance. CONCLUSION: These findings suggest that the remaining alveolar bone height does not appear to influence the maturation and consolidation of an allograft in the maxillary sinus.