Nano-achiral complex composites for extreme polarization optics.

Composites from 2D nanomaterials show uniquely high electrical, thermal and mechanical properties1,2. Pairing their robustness with polarization rotation is needed for hyperspectral optics in extreme conditions3,4. However, the rigid nanoplatelets have randomized achiral shapes, which scramble the circular polarization of photons with comparable wavelengths. Here we show that multilayer nanocomposites from 2D nanomaterials with complex textured surfaces strongly and controllably rotate light polarization, despite being nano-achiral and partially disordered. The intense circular dichroism (CD) in nanocomposite films originates from the diagonal patterns of wrinkles, grooves or ridges, leading to an angular offset between axes of linear birefringence (LB) and linear dichroism (LD). Stratification of the layer-by-layer (LBL) assembled nanocomposites affords precise engineering of the polarization-active materials from imprecise nanoplatelets with an optical asymmetry g-factor of 1.0, exceeding those of typical nanomaterials by about 500 times. High thermal resilience of the composite optics enables operating temperature as high as 250 °C and imaging of hot emitters in the near-infrared (NIR) part of the spectrum. Combining LBL engineered nanocomposites with achiral dyes results in anisotropic factors for circularly polarized emission approaching the theoretical limit. The generality of the observed phenomena is demonstrated by nanocomposite polarizers from molybdenum sulfide (MoS2), MXene and graphene oxide (GO) and by two manufacturing methods. A large family of LBL optical nanocomponents can be computationally designed and additively engineered for ruggedized optics.

Hierarchically structured bioinspired nanocomposites.

Next-generation structural materials are expected to be lightweight, high-strength and tough composites with embedded functionalities to sense, adapt, self-repair, morph and restore. This Review highlights recent developments and concepts in bioinspired nanocomposites, emphasizing tailoring of the architecture, interphases and confinement to achieve dynamic and synergetic responses. We highlight cornerstone examples from natural materials with unique mechanical property combinations based on relatively simple building blocks produced in aqueous environments under ambient conditions. A particular focus is on structural hierarchies across multiple length scales to achieve multifunctionality and robustness. We further discuss recent advances, trends and emerging opportunities for combining biological and synthetic components, state-of-the-art characterization and modelling approaches to assess the physical principles underlying nature-inspired design and mechanical responses at multiple length scales. These multidisciplinary approaches promote the synergetic enhancement of individual materials properties and an improved predictive and prescriptive design of the next era of structural materials at multilength scales for a wide range of applications.

Efficiency and Mechanism of Catalytic Siloxane Exchange in Vitrimer Polymers: Modeling and Density Functional Theory Investigations.

Of late, siloxane-containing vitrimers have gained significant interest due to their fast dynamic characteristics over a reasonable temperature range (180-220 °C), making them well-suited for diverse applications. The exchange reaction pathway in the siloxane vitrimers is accountable for the covalent adaptive network, with the reaction's effectiveness being regulated by either organic or organometallic catalysts. However, directly studying the exchange reaction pathway in the bulk phase using experimental approaches is challenging because of the intricate and interconnected structure of these vitrimers. Here, we perform comprehensive density functional theory (DFT) and experimental investigations to discover the detailed catalytic efficacy of siloxane exchange and provide direction for the reaction process using a 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) catalyst. The calculated transition barrier energy and catalytic efficiency of hexamethyldisiloxane and dihydroxy-dimethylsilane exchange derived from the nudged elastic band with transition-state calculations strongly agree with the experimental findings. In addition, Fukui indices, along with partial charges, are employed to evaluate the nucleophilic and electrophilic behaviors of silanol and siloxane molecules. Our analysis revealed that by utilizing the Fukui indices of both the acid and the base, we can make an approximate estimation of the respective kinetics of the SN2 process in the siloxane exchange reaction mechanism. These findings establish a foundation for comprehending a crucial aspect of the exchange mechanism in siloxane vitrimer systems and could aid in the development of novel catalysts.

Surface Functionalization of Ti3C2Tx MXene Nanosheets with Catechols: Implication for Colloidal Processing.

Precise tailoring of two-dimensional nanosheets with organic molecules is critical to passivate the surface and control the reactivity, which is essential for a wide range of applications. Herein, we introduce catechols to functionalize exfoliated MXenes (Ti3C2Tx) in a colloidal suspension. Catechols react spontaneously with Ti3C2Tx surfaces, where binding is initiated from a charge-transfer complex as confirmed by density functional theory (DFT) and UV-vis. Ti3C2Tx sheet interlayer spacing is increased by catechol functionalization, as confirmed by X-ray diffraction (XRD), while Raman and atomic force microscopy-infrared spectroscopy (AFM-IR) measurements indicate binding of catechols at the Ti3C2Tx surface occurs through metal-oxygen bonds, which is supported by DFT calculations. Finally, we demonstrate immobilization of a fluorescent dye on the surface of MXene. Our results establish a strategy for tailoring MXene surfaces via aqueous functionalization with catechols, whereby colloidal stability can be modified and further functionality can be introduced, which could provide excellent anchoring points to grow polymer brushes and tune specific properties.

Ab initio molecular dynamics modeling of single polyethylene chains: Scission kinetics and influence of radical under mechanical strain.

Ab initio molecular dynamics was used to estimate the response to constant imposed strain on a short polyethylene (PE) chain and a radical chain with a removed hydrogen atom. Two independent types of simulations were run. In the first case, the chains were strained by expanding a periodic cell, restraining the length but allowing the internal degrees of freedom to reach equilibrium. From these simulations, the average force on the chain was computed, and the resulting force was integrated to determine the Helmholtz free energy for chain stretching. In the second set of simulations, chains were constrained to various lengths, while a bond was restrained at various bond lengths using umbrella sampling. This provided free energy of bond scission for various chain strains. The sum of the two free energy functions results in an approximation of the free energy of chain scission under various strains and gives a realistic and new picture of the effect of chain strain on bond breaking. Unimolecular scission rates for each chain type were examined as a function of chain strain. The scission rate for the radical chain is several orders of magnitude larger than that of the pristine chain at smaller strains and at equilibrium. This highlights the importance of radical formation in PE rupture and is consistent with experiments. Constant strain results were used to derive a constant-force model for the radical chain that demonstrates a roll over in rate similar to the "catch-bond" behavior observed in protein membrane detachment experiments.

Conductive Polyamide-Graphene Composite Fabric via Interface Engineering.

Conductive fabrics have received significant attention because of their widespread applications from smart textiles to energy storage devices. Conductive colloidal materials are preferred as a coating on the fabric to achieve desirable electronic conductivity; however, obtaining a uniform coverage with a simple and effective route is a challenge. Herein, we report exfoliated graphene nanoplatelets (GNPs) in low boiling point solvents and their subsequent coating onto a polyamide fabric surface. Few-layered (average <7 layers) GNPs were obtained by optimizing solubility parameters of solvent mixtures and sonication time. Raman spectroscopy showed that the ID/ IG ratio changed from 0.33 to 0.38 in the GNP solution before and after the sonication, confirming an insignificant increase in defects on the basal plane of graphene after sonication treatment. Uniform coating of GNPs was obtained by optimizing concentration and sonication times. Scanning electron microscopy showed a uniform coverage of GNPs, and the surface resistivity of the polyamide fabric decreased from infinity to ∼40 kΩ after 4 h of coating. X-ray diffraction analysis confirmed the minimal effect on the fabric crystallinity during processing. This interface engineering approach is simple and scalable, and it is applicable for the coating of different polymeric fabrics with a great promise in electronic textiles.

Analytical-Based Methodologies for Examining the In Vitro Absorption, Distribution, Metabolism, and Elimination (ADME) of Silver Nanoparticles.

The clinical applications of silver nanoparticles (AgNPs) remain limited due to the lack of well-established methodologies for studying their nanokinetics. Hereby, the primary goal is to adapt a suite of analytical-based methodologies for examining the in vitro absorption, distribution, metabolism, and elimination of AgNPs. Vero 76 and HEK 293 cells are exposed to ≈10-nm spherical AgNPs+ and AgNPs- at relevant concentrations (0-300 µg mL-1 ) and times (4-48 h). Absorption: Inductively coupled plasma optical emission spectroscopy (ICP-OES) demonstrates that the two AgNP formulations are not bioequivalent. For example, different bioavailabilities (Cmaximum < 20.7 ± 4% and 6.82 ± 0.4%), absorption times (Tmaximum > 48 and ≈24 h), and absorption rate laws (first- and zeroth-order at 300 µg mL-1 ) are determined in Vero 76 for AgNPs+ and AgNPs- , respectively. Distribution: Raman and CytoViva hyperspectral imaging show different cellular localizations for AgNPs+ and AgNPs- . Metabolism: Cloud point extraction (CPE)-tangential flow filtration (TFF) reveal that ≤ 11% ± 4% of the administered, sublethal AgNPs release Ag+ and contribute to the observed cytotoxicity. Elimination: ICP-OES-CPE suggests that AgNPs are cleared via exocytosis.

Plasmonic resonances in self-assembled reduced symmetry gold nanorod structures.

Self-assembled plasmonic Dolmen structures consisting of small gold nanorods (length = 50 nm and diameter = 20 nm) with a few nanometer gaps are observed to show coherent effects of super-radiance and characteristics of Fano resonance due to the significantly reduced symmetry of the structure. Relative to previous larger structures from top-down electron-beam lithography, the single crystallinity and atomically smooth surfaces of these self-assembled plasmonic structures result in 50% narrower resonances, and the small gaps with associated strong coupling enable observation of multiple dark and bright modes. By tilting the cap monomer with respect to the base dimer an order of magnitude increase in E-field enhancement at the Fano dip is obtained. In addition, a spectrally broad mode is observed indicating the strong impact of the geometry of the structure on the nature of coupled modes. The highly localized electric near-fields in the gaps will enable strong light matter interactions and the narrow resonances will be useful for improved figure of merits in inexpensive chemical and biosensing.

Plasmon-induced transparency in the visible region via self-assembled gold nanorod heterodimers.

The phenomenon of plasmon-induced transparency holds immense potential for high sensitivity sensors and optical information processing due to the extreme dispersion and slowing of light within a narrow spectral window. Unfortunately plasmonic metamaterials demonstrating this effect has been restricted to infrared and greater wavelengths due to requisite precision in structure fabrication. Here we report a novel metamaterial synthesized by bottom-up self-assembly of gold nanorods. The small dimensions (≤ 50/20 nm, length/diameter), atomically smooth surfaces, and nanometer resolution enable the first demonstration of plasmon-induced transparency at visible wavelengths. The slow-down factors within the reduced symmetry heterodimer cluster are comparable to longer wavelength counterparts. The inherent spectral tunability and facile large-scale integration afforded by self-assembled metamaterials will open a new paradigm for physically realizable on-chip photonic device designs.

Surface assembly and plasmonic properties in strongly coupled segmented gold nanorods.

An assembly strategy is reported such that segmented nanorods fabricated through template-assisted methods can be robustly transferred and tethered to a pre-functionalized substrate with excellent uniformity over large surface areas. After embedding the rods, sacrificial nickel segments were selectively etched leaving behind strongly coupled segmented gold nanorods with gaps between rods below 40 nm and as small as 2 nm. Hyper-spectral imaging is utilized to measure Rayleigh scattering spectra from individual and coupled nanorod elements in contrast to common bulk measurements. This approach discerns the effects of not only changing segment and gap size but also the presence of characteristic defects on the plasmonic coupling between closely spaced nanorods. Polarized hyper-spectral measurements are conducted to provide direct observation of the anisotropic plasmonic resonance modes in individual and coupled nanorods, which are close to those predicted by computer simulations for nanorods with ideal shapes. Some common deviations from ideal shape such as non-flat facets and asymmetric tails are demonstrated to result in the appearance of characteristic plasmon resonances, which have not been considered before. The large-scale assembly of coupled noble nanostructures with fine control over geometry and high uniformity provides means to strongly tune the scattering, absorption, and near-field plasmonic properties through the geometric arrangement of precisely controlled nanorod segments.

Bioinspired Design Rules from Highly Mineralized Natural Composites for Two-Dimensional Composite Design.

Discoveries of two-dimensional (2D) materials, exemplified by the recent entry of MXene, have ushered in a new era of multifunctional materials for applications from electronics to biomedical sensors due to their superior combination of mechanical, chemical, and electrical properties. MXene, for example, can be designed for specialized applications using a plethora of element combinations and surface termination layers, making them attractive for highly optimized multifunctional composites. Although multiple critical engineering applications demand that such composites balance specialized functions with mechanical demands, the current knowledge of the mechanical performance and optimized traits necessary for such composite design is severely limited. In response to this pressing need, this paper critically reviews structure-function connections for highly mineralized 2D natural composites, such as nacre and exoskeletal of windowpane oysters, to extract fundamental bioinspired design principles that provide pathways for multifunctional 2D-based engineered systems. This paper highlights key bioinspired design features, including controlling flake geometry, enhancing interface interlocks, and utilizing polymer interphases, to address the limitations of the current design. Challenges in processing, such as flake size control and incorporating interlocking mechanisms of tablet stitching and nanotube forest, are discussed along with alternative potential solutions, such as roughened interfaces and surface waviness. Finally, this paper discusses future perspectives and opportunities, including bridging the gap between theory and practice with multiscale modeling and machine learning design approaches. Overall, this review underscores the potential of bioinspired design for engineered 2D composites while acknowledging the complexities involved and providing valuable insights for researchers and engineers in this rapidly evolving field.

High-yield assembly of soluble and stable gold nanorod pairs for high-temperature plasmonics.

Colloidal synthetic approaches to discrete, soluble plasmonic architectures, such as nanorod pairs, offer numerous advantages relative to lithographic techniques, including compositionally asymmetric structures, atomically smooth surfaces, and continuous fabrication. Density-driven colloidal assembly, such as by solvent evaporation, produces some intriguing structures, e.g., particle chains; however, controllability and post-processibility of the final architecture is inadequate. Also the limited quantity of product nominally comprises a broad distribution of assembly size and type. Herein, the high-yield formation of soluble, stable, and compositionally discrete gold nanorod (Au NR) architectures by inducing-then arresting-flocculation is demonstrated using bifunctional nanorods and reversible modulation of solvent quality to deplete and reassemble an electrostatic stabilization layer, thereby eliminating the need for an additional encapsulant. Analogous to dimer formation during step-growth polymerization, the initial yield of Au nanorod side-by-side pairs can be greater than 50%. The high solubility and stability of the assembly enable purification, scale-up of nanomolarity solutions, and subsequent chemical modification of the assembled product. As an example, in situ silica deposition via Stöber synthesis onto the assembled pair produces highly processable nanostructures with a single pair of embedded Au NRs at their center, which exhibit thermal stability at temperatures in excess of 700 °C.

Carbon Fiber Surface Functional Landscapes: Nanoscale Topography and Property Distribution.

The ultimate properties of carbon fibers and their composites are largely dictated by the surface topography of the fibers and the interface characteristics, which are primarily influenced by the surface distribution of chemical functionalities and their interactions with the matrix resin. Nevertheless, nanoscale insights on the carbon fiber surface in relationship with its chemical modification are still rarely addressed. Here, we demonstrate a critical insight on the nanoscale surface topography characterization of modified novel carbon fibers using high-resolution atomic force microscopy at multiple length scales. We compare the nanoscale surface characteristics relevant to their role in controlling interfacial interactions for carbon fibers manufactured at two different tensions and two distinct chemically functionalized coatings. We used surface dimple (also known as nanopores) profiling, microroughness analysis, power spectral density analysis, and adhesion and electrostatic potential mapping to reveal the fine details of surface characteristics at different length scales. This analysis demonstrates that the carbon fibers processed at lower tension possess a higher fractal dimension with a more corrugated surface and higher surface roughness, which leads to increased surface adhesion and energy dissipation across nano- and microscales. Furthermore, electrochemical surface modification with amine- and fluoro-functional groups significantly masks the microroughness inherent to these fibers. This results in increased fractal dimension and decreased energy dissipation and adhesion due to the high chemical reactivity in the areas of asperities and surface defects combined with a significant increase in the surface potential, as revealed by Kelvin probe mapping. These local surface properties of carbon fibers are crucial for designing next-generation fiber composites with predictable interfacial strength and the overall mechanical performance by considering the fiber surface topography for proper control of interphase formation.

Recyclability of Vitrimer Materials: Impact of Catalyst and Processing Conditions.

With sustainability at the forefront of material research, recyclable polymers, such as vitrimers, have garnered increasing attention since their introduction in 2011. In addition to a traditional glass-transition temperature (T g), vitrimers have a second topology freezing temperature (T v) above which dynamic covalent bonds allow for rapid stress relaxation, self-healing, and shape reprogramming. Herein, we demonstrate the self-healing, shape memory, and shape reconfigurability properties as a function of experimental conditions, aiming toward recyclability and increased useful lifetime of the material. Of interest, we report the influence of processing conditions, which makes the material vulnerable to degradation. We report a decreased crosslink density with increased thermal cycling and compressive stress. Furthermore, we demonstrate that shape reconfigurability and self-healing are enhanced with increasing compressive stress and catalyst concentration, while their performance as a shape memory material remains unchanged. Though increasing the catalyst concentration, temperature, and compressive stress clearly enhances the recovery performance of vitrimers, we must emphasize its trade-off when considering the material degradation reported here. While vitrimers hold great promise as structural materials, it is vital to understand how experimental parameters impact their properties, stability, and reprocessability before vitrimers reach their true potential.

Toward Architected Nanocomposites: MXenes and Beyond.

Achieving excellent electromagnetic interference (EMI) shielding combined with mechanical flexibility, optical transparency, and environmental stability is vital for the future of coatings, electrostatic discharge, electronic displays, and wearable and portable electronic devices. Unfortunately, it is challenging to engineer materials with all of these desired properties due to a lack of understanding of the underlying materials physics and structure-property relationships. Nature has provided numerous examples of a combination of properties through precision engineering of hierarchical structures at multiple length scales with selectively chosen ingredients. This inspiration is reflected in a wide range of synthetic architected nanocomposites. In this Perspective, we provide a brief overview of recent advances in the role of hierarchical architectures in MXene-based thin-film nanocomposites in the quest to achieve multiple functionalities, especially focusing on a combination of excellent EMI shielding, transparency, and mechanical robustness. We also discuss key opportunities, challenges, and prospects.

Halogen Etch of Ti3AlC2 MAX Phase for MXene Fabrication.

The versatile property suite of two-dimensional MXenes is driving interest in various applications, including energy storage, electromagnetic shielding, and conductive coatings. Conventionally, MXenes are synthesized by a wet-chemical etching of the parent MAX-phase in HF-containing media. The acute toxicity of HF hinders scale-up, and competing surface hydrolysis challenges control of surface composition and grafting methods. Herein, we present an efficient, room-temperature etching method that utilizes halogens (Br2, I2, ICl, IBr) in anhydrous media to synthesize MXenes from Ti3AlC2. A radical-mediated process depends strongly on the molar ratio of the halogen to MAX phase, absolute concentration of the halogen, the solvent, and temperature. This etching method provides opportunities for controlled surface chemistries to modulate MXene properties.

Monolithic Chiral Nematic Organization of Cellulose Nanocrystals under Capillary Confinement.

We demonstrate bioenabled crack-free chiral nematic films prepared via a unidirectional flow of cellulose nanocrystals (CNCs) in the capillary confinement. To facilitate the uniform long-range nanocrystal organization during drying, we utilized tunicate-inspired hydrogen-bonding-rich 3,4,5-trihydroxyphenethylamine hydrochloride (TOPA) for physical cross-linking of nanocrystals with enhanced hydrogen bonding and polyethylene glycol (PEG) as a relaxer of internal stresses in the vicinity of the capillary surface. The CNC/TOPA/PEG film is organized as a left-handed chiral structure parallel to flat walls, and the inner volume of the films displayed transitional herringbone organization across the interfacial region. The resulting thin films also exhibit high mechanical performance compared to brittle films with multiple cracks commonly observed for capillary-formed pure CNC films. The chiral nematic ordering of modified TOPA-PEG-CNC material propagates through the entire thickness of robust monolithic films and across centimeter-sized surface areas, facilitating consistent, vivid iridescence, and enhanced circular polarization. The best performance that prevents the cracks was achieved for a CNC/TOPA/PEG film with a minimal, 3% amount of TOPA. Overall, we suggest that intercalation of small highly adhesive molecules to cellulose nanocrystal-polymer matrices can facilitate uniform flow of liquid crystal phase and drying inside the capillary, resulting in improvement of the ultimate tensile strength and toughness (77% and 100% increase, respectively) with controlled uniform optical reflection and enhanced circular polarization unachievable during regular drying conditions.

Switchable Photonic Bio-Adhesive Materials.

A soft photonic bio-adhesive material is designed with real-time colorimetrical monitoring of switchable adhesion by integrating a responsive bio-photonic matrix with mobile hydrogen-binding networking. Synergetic materials sequencing creates a unique iridescent appearance directly coupled with both adhesive ability and shearing strength, in a highly reversible manner. The responsive photonic materials, having a physically hydrogen-bonded chiral nematic organization, vary their adhesion strength due to a transition in cohesive and interfacial failure mechanism in humid surroundings. The bright color appearance shifts from blue to red to transparent and back due to a change in pitch length of the chiral helicoidal organization that also triggers coupled changes in both mechanical strength and interfacial adhesion. Such reversible strength-adhesion-iridescence triple-coupling phenomenon is further explored for design of super-strong switchable bio-adhesives for synthetic/biological surfaces with quick remotely triggered sticky-to-nonsticky transitions, removable conformal soft stickers, and wound dressings with visual monitoring of the healing process, to colorimetric stickers for contaminated respiratory masks.

Transesterification in Vitrimer Polymers Using Bifunctional Catalysts: Modeled with Solution-Phase Experimental Rates and Theoretical Analysis of Efficiency and Mechanisms.

Recently, thermoset vitrimer polymers have shown significant promise for structural applications because of their ability to be reshaped and remolded due to their covalent adaptive network (CAN). In these vitrimers, the transesterification reaction is responsible for the CAN, where the efficiency of the reaction is controlled either by organic or by organometallic catalysts. Understanding the mechanism of the transesterification reaction in the bulk phase using direct experimental techniques is extremely difficult due to the highly cross-linked complex structure of thermosetting vitrimers. Therefore, we use solution-phase experiments to investigate the catalytic efficiency and to guide density functional theory (DFT) simulations of the transesterification reaction mechanism with catalysts triazabicyclodecene (TBD), zinc acetate (Zn(OAc)2), 1-methylimidazole (1-MI), and dibutyltin oxide (DBTO). The estimated catalytic efficiency from the detailed DFT reaction path calculations follows the order TBD ≳ DBTO ≳ Zn(OAc)2 > 1-MI, which agrees with the experimental results. In addition to reaction path modeling, the mechanism and the relative rates of the transesterification reaction are analyzed with the assistance of Fukui indices as a measure of electrophilicity and nucleophilicity of atomic sites and with partial charges. It was found that the sum of the nucleophilicity index of the base and the electrophilicity index of the acid of the bifunctional catalysts correlates with the SN2 transition state and tetrahedral intermediate energies, which are related to the barrier of the rate-limiting step. This correlation provides a hypothesis for computational prescreening of potentially better catalysts that have an index in a range of values. These results provide a basis for understanding an important part of the mechanism of transesterification in vitrimer systems and may assist with designing new catalysts.