RESUMO
We study the diffusive behavior of linear trimer particles via numerical calculations. First, we utilize hydrodynamic bead-shell calculations to compute the microscopic diffusion coefficients for different particle aspect ratios. These values are then used to obtain continuous empirical formulas for said coefficients. As an application example for the empirical formulas, we perform Brownian dynamics simulations of monolayers consisting of a linear trimer surrounded by colloidal spheres. Here, we obtain empirical formulas for the corresponding long-time diffusion coefficients of the trimer. By comparing our data for the microscopic and long-time diffusion coefficients with known results for spherocylinders, we find that the diffusive behavior of both particle geometries is approximately identical. Based on this observation, we introduce simplified equations for the microscopic diffusion coefficients that can be used for arbitrary short rods that are spheres at the minimum aspect ratios. The calculated equations for the diffusion coefficients can be applied to various further numerical and experimental studies utilizing linear trimer particles.
RESUMO
We use a degenerated Ising model to describe nucleation and crystallization from solution in a confined two-component system. The free energy is calculated using metadynamics simulation with coordination numbers as the reaction coordinates. We deploy nudged elastic band simulation to determine the minimum energy path and give properties of the crystallization path. In this confined system, depletion effects, which could also be caused by slow material transport in the solution, prevent the post-critical cluster from further growth, and the crystalline state would only be stable at larger cluster sizes. Fluctuation of the higher coupling strength of the crystalline state enables further growth until the crystalline cluster is in equilibrium with the solvent, and this way, a second barrier is crossed. From the parameters and setup, we find necessary conditions for the occurrence of two-step nucleation in our system. These findings can be adapted to real systems as biomineralization, colloidal crystallization, and the solidification of metals.
RESUMO
The structure formation and the phase behaviour of monolayers of dumbbell-shaped colloids are explored. For this, we conduct Langmuir-Blodgett experiments at the air/water interface and conventional Brownian dynamic simulations without hydrodynamic interactions. Using Voronoi tessellations and the probability density of the corresponding shape factor of the Voronoi cells p(ζ), the influence of the area fraction φ on the structure of the monolayers is investigated. An increase of the area fraction leads to a higher percentage of domains containing particles with six nearest neighbours and a sharper progression of p(ζ). Especially in dense systems, these domains can consist of aligned particles with uniform Voronoi cells. Thus, the increase of φ enhances the order of the monolayers. Simulations show that a sufficient enhancement of φ also impacts the pair correlation function which develops a substructure in its first maxima. Furthermore, we find that reducing the barrier speed in the Langmuir-Blodgett experiments enhances the final area fraction for a given target surface pressure which, in turn, also increases the percentage of particles with six nearest neighbours and sharpens the progression of p(ζ). Overall, the experiments and simulations show a remarkable qualitative agreement which indicates a versatile way of characterising colloidal monolayers by Brownian dynamics simulations. This opens up perspectives for application to a broad range of nanoparticle-based thin film coatings and devices.
RESUMO
We explore the diffusion properties of colloidal particles with dumbbell and spherocylinder shapes using a hydrodynamic bead-shell approach and additional Brownian dynamics (BD) simulations. By applying the bead-shell method, we determine empirical formulas for the microscopic diffusion coefficients. A comparison of these formulas and established experimental and theoretical results shows remarkable agreement. For example, the maximum relative discrepancy found for dumbbells is less than 5%. As an application example of the empirical formulas, we perform two-dimensional (2D) BD simulations based on a single dumbbell or spherocylinder in a suspension of spheres and calculate the resulting effective long-time diffusion coefficients. The performed BD simulations can be compared to quasi-2D systems such as colloids confined at the interface of two fluids. We find that the effective diffusion coefficient of translation mostly depends on the sphere area fraction Ï, while the effective diffusion coefficient of rotation is influenced by the aspect ratio and Ï. Furthermore, the effective rotational diffusion constant seems to depend on the particle shape with the corresponding implementation of the interactions. In the resolution limit of our methods, the shape-dependent differences of the microscopic diffusion coefficients and the long-time diffusion constant of translation are negligible in the first approximation. The determined empirical formulas for the microscopic diffusion coefficients add to the knowledge of the diffusion of anisotropic particles, and they can be used in countless future studies.
RESUMO
We study voltage-induced conductance changes of Pb, Au, Al, and Cu atomic contacts. The experiments are performed in vacuum at low temperature using mechanically controllable break junctions. We determine switching histograms, i.e., distribution functions of switching voltages and switching currents, as a function of the conductance. We observe a clear material dependence: Au reveals the highest and almost conductance-independent switching voltage, while Al has the lowest with a pronounced dependence on the conductance. The theoretical study uses density functional theory and a generalized Langevin equation considering the pumping of particular phonon modes. We identify a runaway voltage as the threshold at which the pumping destabilizes the atomic arrangement. We find qualitative agreement between the average switching voltage and the runaway voltage regarding the material and conductance dependence and contact-to-contact variation of the average characteristic voltages, suggesting that the phonon pumping is a relevant mechanism driving the rearrangements in the experimental contacts.
RESUMO
We employ the well-tempered parallel-bias metadynamics algorithm to study the stability of nanoparticles in a lattice gas for crystallization from solution. The model allows us to give a description for the transition from amorphous to crystalline nanoparticles by introducing parameters directly related to the surface tensions of the two phases and also the differences of the entropy per particle in each phase. By examining the parameter space, we find a critical cluster size of crystalline stability, whose temperature and size dependencies follow the Gibbs-Thomson equation. An additional melting point depression due to cluster surface fluctuations is observed, leading to a non-classical nucleation barrier of cluster growth.
RESUMO
We report conductance and thermopower measurements of metallic atomic-size contacts, namely gold and platinum, using a scanning tunneling microscope (STM) at room temperature. We find that few-atom gold contacts have an average negative thermopower, whereas platinum contacts present a positive thermopower, showing that for both metals, the sign of the thermopower in the nanoscale differs from that of bulk wires. We also find that the magnitude of the thermopower exhibits minima at the maxima of the conductance histogram in the case of gold nanocontacts while for platinum it presents large fluctuations. Tight-binding calculations and Green's function techniques, together with molecular dynamics simulations, show that these observations can be understood in the context of the Landauer-Büttiker picture of coherent transport in atomic-scale wires. In particular, we show that the differences in the thermopower between these two metals are due to the fact that the elastic transport is dominated by the 6s orbitals in the case of gold and by the 5d orbitals in the case of platinum.
Assuntos
Ouro/química , Platina/química , Teoria Quântica , Temperatura , Microscopia de Tunelamento , Simulação de Dinâmica MolecularRESUMO
Brownian dynamics simulations are utilized to study segregation phenomena far from thermodynamic equilibrium. In the present study, we expand upon the analysis of binary colloid mixtures and introduce a third particle species to further our understanding of colloidal systems. Gravitationally driven, spherical colloids immersed in an implicit solvent are confined in two-dimensional linear microchannels. The interaction between the colloids is modeled by the Weeks-Chandler-Andersen potential, and the confinement of the colloids is realized by hard walls based on the solution of the Smoluchowski equation in half space. In binary and ternary colloidal systems, a difference in the driving force is achieved by differing colloid sizes but fixed mass density. We observe for both the binary and ternary systems that a driving force difference induces a nonequilibrium phase transition to lanes. For ternary systems, we study the tendency of lane formation to depend on the diameter of the medium-sized colloids. Here we find a sweet spot for lane formation in ternary systems. Furthermore, we study the interaction of two differently sized colloids at the channel walls. Recently we observed that driven large colloids push smaller colloids to the walls. This results in small particle lanes at the walls at early simulation times. In this work we additionally find that thin lanes are unstable and dissolve over very long time frames. Furthermore, we observe a connection between lane formation and the nonuniform distribution of particles along the channel length. This nonuniform distribution occurs either alongside lane formation or in shared lanes (i.e., lanes consisting of two colloid types).
RESUMO
Surface-engineered magnetic microparticles are used in chemical and biomedical engineering due to their ease of synthesis, high surface-to-volume ratio, selective binding, and magnetic separation. To separate them from fluid suspensions, existing methods rely on the magnetic force introduced by the local magnetic field gradient. However, this strategy has poor scalability because the magnetic field gradient decreases rapidly as one moves away from the magnets. Here, we present a scalable high-throughput magnetic separation strategy using a rotating permanent magnet and two-dimensional arrays of micromagnets. Under a dynamic magnetic field, nickel micromagnets allow the surrounding magnetic microparticles to self-assemble into large clusters and effectively propel themselves through the flow. The collective speed of the microparticle swarm reaches about two orders of magnitude higher than the gradient-based separation method over a wide range of operating frequencies and distances from a rotating magnet.
RESUMO
We study the influence of the cargo shape on the capture and transport process of colloidal rods via swarms of active particles using Brownian dynamics simulations. Starting at random initial conditions, active particles that interact via the Lennard-Jones potential and possess a tuneable speed are utilised to capture passive rods inside a hexagonal cage of individually addressable units. By adjusting the velocity of the individual active particles, the rod can then be transported. To guarantee a successful capture process (with a strong localisation), we find that specific geometric and energetic constraints have to be met; i.e., the length of the rod must approximately be in the vicinity of an odd multiple of the lattice constant of the hexagonal cage, and the Lennard-Jones interaction strength must be in the range of [Formula: see text] to [Formula: see text]. If the cargo aspect ratio gets too large, the subsequent transport of successfully captured rods can fail. For systems where transport is possible, an increase in the cargo aspect ratio decreases the achievable transport velocity. Our work shows that the particle shape must be considered while designing interaction rules to accomplish specific tasks via groups of controllable units.
RESUMO
We investigate the lane formation in nonequilibrium systems of colloidal particles moving in parallel that are driven by the force of gravity. For this setup, an experimental implementation of a channel on a slope can be conceptualized. We employ the Brownian dynamics algorithm and confine the repulsive particles with hard walls based on the solution of the Smoluchowski equation in the half space. A difference of the driving force acting on the colloids could be achieved by using two spherical particle types with differing diameters but equal mass density. First, we investigate how a difference in the channel slope affects the lane formation of the systems, after which we analyze the lanes that formed. We find that the large particles push the small particles to the walls, resulting in exclusively small particle lanes at the walls. This contrasts the equilibrium state, where depletion forces push the larger particles to the walls. Additionally, we have a closer look at the mechanisms by which the lanes form. Finally, we find system parameter values that foster lane formation to lay the foundation for an experimental realization of our proposed setup. To round this off, we give an exemplary calculation of the slope angle needed to get the experimental system into a state of lane order. With the examination of lane order in systems that are driven in parallel, we hope to deepen our understanding of nonequilibrium order phenomena.
RESUMO
We investigate the formation of cohesive groups and the collective diffusion of colloidal spherocylinders with a motility driven by a simple visual perception model. For this, we perform Brownian dynamics simulations without hydrodynamic interactions. The visual perception is based on sight cones attached to the spherocylinders and perception functions quantifying the visual stimuli. If the perception function of a particle reaches a predefined threshold, an active component is added to its motion. We find that, in addition to the opening angle of the cone of sight, the aspect ratio of the particles plays an important role for the formation of cohesive groups. If the elongation of the particles is increased, the maximum angle for which the rods organize themselves into such groups decreases distinctly. After a system forms a cohesive group, it performs a diffusive motion, which can be quantified by an effective diffusion coefficient. For increasing aspect ratios, the spatial expansion of the cohesive groups and the effective diffusion coefficient of the collective motion increase, while the number of active group members decreases. We also find that a larger particle number, a smaller propulsion velocity of the group members, and a smaller threshold for the visual stimulus increase the maximum opening angle for which cohesive groups form. Based on our results, we expect anisotropic particles to be of great relevance for the adjustability of visual perception-dependent motility.
RESUMO
We study the segregation phenomena for oppositely driven colloidal particles in two-dimensional ring geometries by means of Brownian dynamics simulations without hydrodynamic interactions. The particles interact via a repulsive Yukawa potential and are confined to a two-dimensional circular channel by hard walls, in which half of the particles are driven clockwise and the other half are driven counterclockwise. In addition to lane formation, which is commonly found in oppositely driven systems, we found band formation along the angular direction in channels with a very large radius. This indicates that a formation of lanes is prevented in the limit of channels with an infinitely large inner radius. The dependency of this segregation has been examined for the two control parameters, the interaction strength between the particles and the width of the circular channel.
RESUMO
We experimentally and numerically study the flow of programmable active particles (APs) with tunable cohesion strength through geometric constrictions. Similar to purely repulsive granular systems, we observe an exponential distribution of burst sizes and power-law-distributed clogging durations. Upon increasing cohesion between APs, we find a rather abrupt transition from an arch-dominated clogging regime to a cohesion-dominated regime where droplets form at the aperture of the bottleneck. In the arch-dominated regime the flow-rate only weakly depends on the cohesion strength. This suggests that cohesion must not necessarily decrease the group's efficiency passing through geometric constrictions or pores. Such behavior is explained by "slippery" particle bonds which avoids the formation of a rigid particle network and thus prevents clogging. Overall, our results confirm the general applicability of the statistical framework of intermittent flow through bottlenecks developed for granular materials also in case of active microswimmers whose behavior is more complex than that of Brownian particles but which mimic the behavior of living systems.
RESUMO
We investigate the properties of membranes under tension by Monte Carlo simulations of a generic coarse-grained model for lipid bilayers. We give a comprising overview of the behavior of several membrane characteristics, such as the area per lipid, the monolayer overlap, the nematic order, and pressure profiles. Both the low-temperature regime, where the membranes are in a gel L(beta(')) phase, and the high-temperature regime, where they are in the fluid L(alpha) phase, are considered. In the L(beta(')) state, the membrane is hardly influenced by tension. In the fluid state, high tensions lead to structural changes in the membrane, which result in different compressibility regimes. The ripple state P(beta(')), which is found at tension zero in the transition regime between L(alpha) and L(beta(')), disappears under tension and gives way to an interdigitated phase. We also study the membrane fluctuations in the fluid phase. In the low-tension regime the data can be fitted nicely to a suitably extended elastic theory. At higher tensions the elastic fit consistently underestimates the strength of long-wavelength fluctuations. Finally, we investigate the influence of tension on the effective interaction between simple transmembrane inclusions and show that tension can be used to tune the hydrophobic mismatch interaction between membrane proteins.
Assuntos
Bicamadas Lipídicas/química , Lipídeos/química , Simulação de Dinâmica Molecular , Difusão , Método de Monte Carlo , Pressão , Tensão Superficial , TemperaturaRESUMO
The ordering effects of driven spherocylinder-shaped rods in a colloidal suspension of small spheres confined to a two-dimensional channel geometry are observed via Brownian dynamics simulations without hydrodynamics. To describe the ordering, an order parameter and an expression for a potential of mean force of an equivalent equilibrium system are defined and analyzed. By varying the application point of the external force along the rods and thus the resulting lever, a transition from a preferred orientation parallel to the direction of the force to a preferred orientation perpendicular to the direction of the force was observed. It is shown that this effect can only be found if the spheres and multiple rods are present. Furthermore, a dependency of the order parameter on the absolute value of the force was discovered. The analysis of the potential of mean force further indicates a transition between two different phases of mean orientation. An observation of the flow equilibrium mean velocity in channel direction led to a s-shaped progression regarding the lever dependency, also marking a transition between two states linked to the mean orientation of the rods. A finite size analysis was conducted. Its results indicate that the transition between the two orientation states is a general phenomenon of the observed rod-sphere mixture.
RESUMO
Two-dimensional melting transitions for model colloids in the presence of a one-dimensional external periodic potential are investigated using Monte Carlo simulation and finite size scaling techniques. Here we explore a hard disk system with commensurability ratio p=sqrt[3]as/(2d)=2, where as is the mean distance between the disks and d the period of the external potential. Three phases, the modulate liquid, the locked smectic, and the locked floating solid are observed, in agreement with other experimental and analytical studies. Various statistical quantities like order parameters, their cumulants, and response functions, are used to obtain a phase diagram for the transitions between these three phases.
RESUMO
The phase behavior of a 50% binary hard-disk mixture with diameter ratio sigmaB/sigmaA=0.414 , which is exposed to a one-dimensional periodic potential, is examined via Monte Carlo simulations. We find an induced structural crossover in the modulated liquid. At higher densities, depending on the strength of the external potential, the system exhibits a tunable demixing transition, followed by fluid-solid coexistence of an equimolar mixture with the S1(AB) square lattice. We find a decoupled melting of the sublattices of the S1(AB) lattice. The melting of the small-component sublattice perpendicular to the external potential minima leads to fissuring in the large-component sublattice.
RESUMO
Thermal transport in individual atomic junctions and chains is of great fundamental interest because of the distinctive quantum effects expected to arise in them. By using novel, custom-fabricated, picowatt-resolution calorimetric scanning probes, we measured the thermal conductance of gold and platinum metallic wires down to single-atom junctions. Our work reveals that the thermal conductance of gold single-atom junctions is quantized at room temperature and shows that the Wiedemann-Franz law relating thermal and electrical conductance is satisfied even in single-atom contacts. Furthermore, we quantitatively explain our experimental results within the Landauer framework for quantum thermal transport. The experimental techniques reported here will enable thermal transport studies in atomic and molecular chains, which will be key to investigating numerous fundamental issues that thus far have remained experimentally inaccessible.
RESUMO
This corrects the article DOI: 10.1103/PhysRevE.91.022313.