Impact of nitrogen fertilizer sustainability on corn crop yield: the role of beneficial microbial inoculation interactions.

BACKGROUND: Considering the challenges posed by nitrogen (N) pollution and its impact on food security and sustainability, it is crucial to develop management techniques that optimize N fertilization in croplands. Our research intended to explore the potential benefits of co-inoculation with Azospirillum brasilense and Bacillus subtilis combined with N application rates on corn plants. The study focused on evaluating corn photosynthesis-related parameters, oxidative stress assay, and physiological nutrient use parameters. Focus was placed on the eventual improved capacity of plants to recover N from applied fertilizers (AFR) and enhance N use efficiency (NUE) during photosynthesis. The two-year field trial involved four seed inoculation treatments (control, A. brasilense, B. subtilis, and A. brasilense + B. subtilis) and five N application rates (0 to 240 kg N ha-1, applied as side-dress). RESULTS: Our results suggested that the combined effects of microbial consortia and adequate N-application rates played a crucial role in N-recovery; enhanced NUE; increased N accumulation, leaf chlorophyll index (LCI), and shoot and root growth; consequently improving corn grain yield. The integration of inoculation and adequate N rates upregulated CO2 uptake and assimilation, transpiration, and water use efficiency, while downregulated oxidative stress. CONCLUSIONS: The results indicated that the optimum N application rate could be reduced from 240 to 175 kg N ha-1 while increasing corn yield by 5.2%. Furthermore, our findings suggest that replacing 240 by 175 kg N ha-1 of N fertilizer (-65 kg N ha-1) with microbial consortia would reduce CO2 emission by 682.5 kg CO2 -e ha-1. Excessive N application, mainly with the presence of beneficial bacteria, can disrupt N-balance in the plant, alter soil and bacteria levels, and ultimately affect plant growth and yield. Hence, highlighting the importance of adequate N management to maximize the benefits of inoculation in agriculture and to counteract N loss from agricultural systems intensification.

Açai seed biochar improves soil quality and black pepper seedling development in the Amazon region.

Sustainable management of the Amazon rainforest is fundamental for supporting life on earth because of its crucial role in sequestering carbon. One of the species grown in the forest is açaí (Euterpe oleracea), which is an important food and income source for its inhabitant. The acai seed, resulting from the processing of the fruit, is a solid organic residue, which has been an agent of undesirable environmental impacts such as natural landscape modifications, clogging sewers and water courses, eutrophication of surface waters. In this research, we evaluated the use of wood chips as a source of energy in a rustic oven to produce acai biochar so that family farmers carry out sustainable management of the residue and use biochar to improve soil quality and produce seedlings of native plants to regenerate degraded forests. The experiment was conducted in Pará, Brazil, Amazon region, using a randomized complete block design. A factorial treatment structure was implemented consisting of four biochar particle sizes (3, 5, 7, and 12 mm), 4 application rates (4, 8, 16, and 32 t ha-1), and a biochar-free control, with 5 replications. The results showed that the methodology for biochar production was easy to apply and low cost, allowing its use by family farmers. The combination of biochar rate and particle size affected soil properties and the development of black pepper seedlings in different ways. The soil properties affected were water retention capacity, moisture, fluorescein diacetate hydrolysis and arylsulphatase activity. The growth parameters of the affected black pepper seedlings were height and root system development.

Assessment of human health risks associated with airborne arsenic, nickel and lead exposure in particulate matter from vehicular sources in Sao Paulo city.

Air pollution is a critical public health concern. The present study assessed the risk to human health of airborne Potentially Toxic Elements (PTE) arsenic, nickel and lead exposure in particulate matter (PM10-2.5) in Sao Paulo, Brazil. Statistical analysis was performed using R Software and the risk assessment for human health was carried out according to the methods of the United States Environmental Protection Agency. The results for mean annual concentration of PTE (ng m-3) were within the limits stipulated for air-quality by international agencies (arsenic <6, nickel <20 and lead <150). Airborne arsenic and lead showed higher mean concentrations during the winter than the other seasons (p < 0.05). However, the results showed a greater health risk for the adult population and during the winter season. These findings highlight the importance of air pollution as a risk factor for population health.

Evolution of Vehicle Emission Factors in a Megacity Affected by Extensive Biofuel Use: Results of Tunnel Measurements in São Paulo, Brazil.

Since 2001, four emission measurement campaigns have been conducted in multiple traffic tunnels in the megacity of São Paulo, Brazil, an area with a fleet of more than 7 million vehicles running on fuels with high biofuel contents: gasoline + ethanol for light-duty vehicles (LDVs) and diesel + biodiesel for heavy-duty vehicles (HDVs). Emission factors for LDVs and HDVs were calculated using a carbon balance method, the pollutants considered including nitrogen oxides (NOx), carbon monoxide (CO), and sulfur dioxide, as well as carbon dioxide and ethanol. From 2001 to 2018, fleet-average emission factors for LDVs and HDVs, respectively, were found to decrease by 4.9 and 5.1% per year for CO and by 5.5 and 4.2% per year for NOx. These reductions demonstrate that regulations for vehicle emissions adopted in Brazil in the last 30 years improved air quality in the megacity of São Paulo significantly, albeit with a clear delay. These findings, especially those for CO, indicate that official emission inventories underestimate vehicle emissions. Here, we demonstrated that the adoption of emission factors calculated under real-world conditions can dramatically improve air quality modeling in the region.

Comparing soil-to-plant cadmium (Cd) transfer and potential human intake among rice cultivars with different Cd tolerance levels grown in a tropical contaminated soil.

With its accumulation in upland rice, cadmium (Cd) can easily enter the human food chain, which poses a global health threat considering nearly half of the human population depends on rice as a staple food source. A study was conducted to (1) evaluate Cd accumulation by rice cultivars, grown in Cd-polluted Tropical Oxisols, with different levels of Cd tolerance; (2) quantify Cd transfer from soil to rice shoots and grain; and (3) estimate daily Cd intake by humans. Three rice cultivars, characterized by low (Cateto Seda-CS), medium (BRSMG Talento-BT), and high (BRSMG Caravera-BC) Cd uptake capacity, were investigated. Rice cultivars were exposed to increasing soil Cd concentrations (0.0, 0.7, 1.3, 3.9, 7.8, and 11.7 mg kg-1). Analysis was performed on soil, shoots, and grain. Shoot biomass and grain yield decreased with increasing Cd supply, suggesting the following Cd tolerance: CS > BT > BC. Cadmium concentrations in shoots and grain increased when exposed to Cd. Only CS did not exceed the maximum Cd limit permitted in food (0.40 mg kg-1), when rates up to 1.3 mg kg-1 of Cd were applied to soil. Considering daily rice consumption levels in Brazil, Cd intake often exceeds maximum tolerable levels. Continuous monitoring of soil Cd concentrations is a pivotal step in avoiding hazards to humans. Such monitoring is important on a global scale since outside of Asia, Brazil is the leading rice-producing and rice-consuming country.

A Comparative Study of Full-Thickness Blepharotomy Versus Transconjunctival Eyelid Lengthening in the Correction of Upper Eyelid Retraction in Graves' Orbitopathy.

BACKGROUND: The study was designed to compare the outcome of full-thickness blepharotomy and transconjunctival eyelid lengthening in the correction of upper eyelid retraction (UER) in patients with Graves' orbitopathy (GO). METHODS: This is a prospective randomized interventional study. Following ophthalmic examination, determination of the ocular surface disease index (OSDI) and photography, 27 patients with UER were randomly assigned to either graded full-thickness blepharotomy (G1) or transconjunctival Müller muscle recession and graded disinsertion of the levator palpebrae superioris muscle (G2). Six months later, patients were reevaluated. Digital images were analyzed with the assistance of customized software. A standardized "normal range" of upper eyelid height and contour was calculated based on healthy controls. The outcome of the two groups was compared. RESULTS: Forty-seven eyelids of 27 patients (19 female) with UER were included. Twenty-seven eyelids (15 patients) were allocated to G1 and 20 eyelids (12 patients) to G2. On average, surgery lasted 37.46 ± 5.73 min in G1 and 32.70 ± 8.39 min in G2. Based on the margin reflex distance, 93% of the eyelids in G1 and 85% in G2 were within the normal range after surgery. The corresponding figures for lid contour were 63 and 55%. Both groups displayed significant improvement in OSDI scores. No significant difference was observed in the overall comparison. CONCLUSIONS: The two surgical techniques were equally effective in the treatment of UER from GO. Postoperative contour outcomes were considerably worse in patients with severe UER than in patients with mild or moderate UER, regardless of group. LEVEL OF EVIDENCE II: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to Table of Contents or the online Instructions to Authors www.springer.com/00266 . Study registered on ClinicalTrial.gov number: NCT01999790.

Background concentrations and quality reference values for some potentially toxic elements in soils of São Paulo State, Brazil.

Quality reference values (QRV) for potentially toxic elements (PTE) in soils are established as a tool for prevention and monitoring of soil pollution. These values should be periodically revised in order to ensure soil safety for agricultural purposes. Brazil is market leader for several commodities; therefore, the safety of Brazilian soils is of worldwide strategic importance. The objective of this study was to determine the natural background concentrations and the QRV for As, Ba, Cd, Cr, Ni, Pb, Se, and Zn by investigating 30 representative pedotypes in the São Paulo State, one of the most important agro-industry economy at worldwide level. Multivariate statistical analysis was applied to determine the sources of PTE and their variability. The mean natural background concentrations of PTE in the soils were generally lower to those reported in literature. QRV, calculated for each element as the 75th and 90th percentiles, were lower (75th for As, Cd, Pb, and Zn), similar (75th for Ba, Cr, and Se) or above (90th for Ba, Cr, and Se and 75-90th for Ni) those previously proposed by the Brazilian environmental protection agencies. The results indicate that 75th percentile may be too restrictive. The PTE in the investigated soils appear to have comes mainly from two primary natural sources: a prevalent one of geogenic and a secondary of pedogenic origin. These results confirm the predominant natural source of selected PTE in the investigated soils, thus sustaining the possibility of using the data set to develop QRV for the State of São Paulo.

Fertilization using sewage sludge in unfertile tropical soils increased wood production in Eucalyptus plantations.

Fertilization of Eucalyptus plantations using sewage sludge on unfertile tropical soils represents an alternative to using mineral N and P fertilizers. A 44-month field experiment was conducted to study the effects of increasing application of sludge, and its interactions with mineral N and P fertilizers, on wood volume. Four rates of sludge (0, 8, 15 and 23 Mg ha-1, dry base), N (0, 47, 95 and 142 kg ha-1) and P (0, 28, 56 and 84 kg ha-1 of P2O5) were combined in a 4 × 4 × 4 factorial scheme in a totally randomized block design. Response surface and age-shift modeling was used to establish an initial recommendation for mineral fertilization of the Eucalyptus plantations treated with sludge and to analyze the implications of increased growth on the duration of the forest cycle in a tropical climate. The results showed that from 8 to 44 months after planting, the sludge application (with or without N and P) yielded a statistically larger wood volume (P < 0.05), compared to application of N and P fertilizers only. The response surface modeling showed the following outcomes: i) application of sludge based on N criterion reduced the need for N and P fertilizers by 100%; and ii) an increase in wood volume by 7% could be achieved, compared to NPK fertilizers only, if 2/3 of the recommended P was applied. The cultivation time to produce 150 m3 ha-1 of wood volume was 45 months for the control and was reduced by two, three, four, or five months, respectively, through application of recommended P, sludge dose, sludge plus one third of P, and sludge plus two thirds of P. On the whole, sewage sludge could represent an excellent unconventional N and P fertilizer source for wood production on unfertile tropical soils.

An in situ Evaluation of Bioactives on the Morphology of Bleached Enamel.

AIM: The aim of this study was to use surface rugosity analysis (Ra) and scanning electron microscopy (SEM) comparing effects of nano-hydroxyapatite (NANO), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), and NovaMin (NOVA) on enamel's human morphology bleached with 37.5% hydrogen peroxide. MATERIALS AND METHODS: Forty specimens (3 × 3 × 3 mm) were obtained from fully included third molars and four specimens were attached in the first molars of the volunteers. The POLA-positive control has only been bleached. Three experimental groups were bleached and treated with respective bioactive: NANO, CPP-ACP, and NovaMin. The Ra analyses were performed before and after the treatment using a rugosimeter. The obtained photomicrographs were analyzed using SEM (n = 3) by three examiners, and the study was double blind. RESULTS: The Ra results were analyzed by one-way analysis of variance and Tukey's post hoc test (p < 0.05). All experimental groups showed significant differences of the others; however, the experimental groups were not significantly different from each other. CONCLUSION: The enamel morphology of the bioactive-treated groups had more regular surfaces, than the others.

Carbonaceous fraction in PM2.5 of six Latin American cities: Seasonal variations, sources and secondary organic carbon contribution.

Latin American (LatAm) cities are grappling with elevated levels of gaseous and particulate pollutants, which are having detrimental effects on both the local ecosystem and human health. Of particular concern are aerosols with smaller diameters (lower or equal to 2.5 µm, PM2.5), known for their ability to penetrate deep into the respiratory system. While measurements in the region are increasing, they remain limited. This study addresses this gap by presenting the results of a comprehensive, year-long PM2.5 monitoring campaign conducted in six LatAm cities: Buenos Aires, São Paulo, Medellín, San José, Quito and Ciudad de México. Despite all six monitoring sites being urban, they exhibited significant variations in PM2.5 levels, as well as in the content and seasonal behavior of elemental carbon (EC) and organic carbon (OC). Estimations of secondary organic carbon (SOC) using the EC-tracer method revealed a notable SOC relevance across all cities: secondary organic aerosols (SOA) accounted in average for between 19 % to 48 % of the total carbonaceous matter. Source attribution, conducted through the Positive Matrix Factorization (PMF) model, highlights substantial contributions from gasoline and diesel traffic emissions (29 % to 49 % of total carbon, TC), regional biomass burning (21 % to 27 %), and SOA (20 % to 38 %) in all cities, with similar chemical signatures. Additionally, industrial emissions were significant in two cities (Medellín and San José), while two others experienced minor impacts from construction machinery at nearby sites (Buenos Aires and Quito). This comparative analysis underscores the importance of considering not only the thermal optical EC/OC fractions as tracers of sources but also the OC/EC ratio of the PMF factors. This dual approach not only adds depth to the research but also suggests varied methodologies for addressing this crucial environmental concern. This study lays the groundwork for future investigations into the factors influencing the content and seasonality of SOA in the region.

Short-term usage of sewage sludge as organic fertilizer to sugarcane in a tropical soil bears little threat of heavy metal contamination.

A field experiment was carried out to study the effect of application rates of sewage sludge and mineral nitrogen and phosphate fertilizers on As, Ba, Cd, Cr, Cu, Ni, Pb, Se, and Zn concentration in soil, cane plant, and first ratoon (residual effect) in a Typic Hapludult soil. To allow an analysis by means of response surface modeling, four rates of sewage sludge (0, 3.6, 7.2 and 10.8 t ha(-1), dry base), of N (0, 30, 60 and 90 kg ha(-1)) and of P(2)O(5) (0, 60, 120 and 180 kg ha(-1)) were applied in randomized block design, in a 4 × 4 × 4 factorial scheme, with confounded degrees of freedom for triple interaction, with two replications. To evaluate the residual effect of the sludge applied to cane plant on the cane ratoon growth, mineral NK fertilizers were applied at the rates of 120 kg ha(-1) N and 140 kg ha(-1) of K(2)O, on all treatments. The application rates of mineral nitrogen and phosphate fertilizers did not affect statistically the heavy metal concentration in the soil and in the sugarcane plants. Sewage sludge application increased As, Cd, Cu, Ni, Pb, and Zn concentrations in soil, but values did not exceed the quality standard established by legislation for agricultural soils. Although the concentrations of metals in the plants were very low, the uptake of heavy metal by sugarcane plants was generally increased by sewage sludge doses. The use of sewage sludge based on N criteria introduces a small amount of heavy metal into the agricultural system, however it poses no hazard to the environment.

Health Risk Assessment of Exposure to Air Pollutants Exceeding the New WHO Air Quality Guidelines (AQGs) in São Paulo, Brazil.

We applied the AirQ+ model to analyze the 2021 data within our study period (15 December 2020 to 17 June 2022) to quantitatively estimate the number of specific health outcomes from long- and short-term exposure to atmospheric pollutants that could be avoided by adopting the new World Health Organization Air Quality Guidelines (WHO AQGs) in São Paulo, Southeastern Brazil. Based on temporal variations, PM2.5, PM10, NO2, and O3 exceeded the 2021 WHO AQGs on up to 54.4% of the days during sampling, mainly in wintertime (June to September 2021). Reducing PM2.5 values in São Paulo, as recommended by the WHO, could prevent 113 and 24 deaths from lung cancer (LC) and chronic obstructive pulmonary disease (COPD) annually, respectively. Moreover, it could avoid 258 and 163 hospitalizations caused by respiratory (RD) and cardiovascular diseases (CVD) due to PM2.5 exposure. The results for excess deaths by RD and CVD due to O3 were 443 and 228, respectively, and 90 RD hospitalizations due to NO2. Therefore, AirQ+ is a useful tool that enables further elaboration and implementation of air pollution control strategies to reduce and prevent hospital admissions, mortality, and economic costs due to exposure to PM2.5, O3, and NO2 in São Paulo.

Particulate matter fingerprints in biofuel impacted tunnels in South America's largest metropolitan area.

This study characterized the chemical composition of particulate matter (PM) from light- (LDV) and heavy-duty (HDV) vehicles based on two traffic tunnel samplings carried out in the megacity of São Paulo (Brazil), which has >7 million vehicles and intense biofuel use. The samples were collected with high-volume samplers and analyzed using chemical characterization techniques (ion and gas chromatography, thermal-optical analysis, and inductively coupled plasma mass spectroscopy). Chemical source profiles (%) were calculated based on the measurements performed inside and outside the tunnels. Identifying a high abundance of Fe and Cu for traffic-related PM in the LDV-impacted tunnel was possible, linked with the emission of vehicles powered by ethanol and gasohol (gasoline and ethanol blend). We calculated diagnostic ratios (e.g., EC/Cu, Fe/Cu, pyrene/benzo[a]pyrene, pyrene/benzo[b]fluoranthene, and fluoranthene/benzo[b]fluoranthene) characteristic of fuel exhausts (diesel/biodiesel and ethanol/gasohol), allowing their use in the assessment of the temporal variation of the fuel type used in urban sites. Element diagnostic ratios (Cu/Sb and Fe/Cu) pointed to the predominance of LDVs exhaust-related copper and can differentiate LDVs exhaust from brake wear emissions. The carbonaceous fraction EC3 was suggested as an HDV emission tracer. A higher total polycyclic aromatic hydrocarbons (PAHs) fraction of traffic-related PM2.5 was observed in the HDV-impacted tunnel, with a predominance of diesel-related pyrene and fluoranthene, as well as higher oxy-PAHs (e.g., 9,10-anthraquinone, associated with biodiesel blends) abundances. However, carcinogenic species presented higher abundances for the LDV-impacted tunnel (e.g., benzo[a]pyrene). These findings highlighted the impact of biofuels on the characteristic ratios of chemical species and pointed to possible markers for LDVs and HDVs exhausts.

Emission factors for a biofuel impacted fleet in South America's largest metropolitan area.

The Metropolitan Area of São Paulo (MASP) is among the largest urban areas in the Southern Hemisphere. Vehicular emissions are of great concern in metropolitan areas and MASP is unique due to the use of biofuels on a large scale (sugarcane ethanol and biodiesel). In this work, tunnel measurements were employed to assess vehicle emissions and to calculate emission factors (EFs) for heavy-duty and light-duty vehicles (HDVs and LDVs). The EFs were determined for particulate matter (PM) and its chemical compounds. The EFs obtained for 2018 were compared with previous tunnel experiments performed in the same area. An overall trend of reduction of fine and coarse PM, organic carbon (OC), and elemental carbon (EC) EFs for both LDVs and HDVs was observed if compared to those observed in past years, suggesting the effectiveness of vehicular emissions control policies implemented in Brazil. A predominance of Fe, Cu, Al, and Ba emissions was observed for the LDV fleet in the fine fraction. Cu presented higher emissions than two decades ago, which was associated with the increased use of ethanol fuel in the region. For HDVs, Zn and Pb were mostly emitted in the fine mode and were linked with lubricating oil emissions from diesel vehicles. A predominance in the emission of three- and four-ring polycyclic aromatic hydrocarbons (PAHs) for HDVs and five-ring PAHs for LDVs agreed with what was observed in previous studies. The use of biofuels may explain the lower PAH emissions for LDVs (including carcinogenic benzo[a]pyrene) compared to those observed in other countries. The tendency observed was that LDVs emitted higher amounts of carcinogenic species. The use of these real EFs in air quality modeling resulted in more accurate simulations of PM concentrations, showing the importance of updating data with real-world measurements.

Impact of extreme wildfires from the Brazilian Forests and sugarcane burning on the air quality of the biggest megacity on South America.

Recently, extreme wildfires have damaged important ecosystems worldwide and have affected urban areas miles away due to long-range transport of smoke plumes. We performed a comprehensive analysis to clarify how smoke plumes from Pantanal and Amazon forests wildfires and sugarcane harvest burning also from interior of the state of São Paulo (ISSP) were transported and injected into the atmosphere of the Metropolitan Area of São Paulo (MASP), where they worsened air quality and increased greenhouse gas (GHG) levels. To classify event days, multiple biomass burning fingerprints as carbon isotopes, Lidar ratio and specific compounds ratios were combined with back trajectories modeling. During smoke plume event days in the MASP fine particulate matter concentrations exceeded the WHO standard (>25 µg m-3), at 99 % of the air quality monitoring stations, and peak CO2 excess were 100 % to 1178 % higher than non-event days. We demonstrated how external pollution events such as wildfires pose an additional challenge for cities, regarding public health threats associated to air quality, and reinforces the importance of GHG monitoring networks to track local and remote GHG emissions and sources in urban areas.

Soybean Seed Enrichment with Cobalt and Molybdenum as an Alternative to Conventional Seed Treatment.

Biological nitrogen fixation in soybean is enhanced when seed is treated with cobalt (Co) and molybdenum (Mo) prior to planting. In this study, our objective was to verify if Co and Mo application during the reproductive phase of the crop increases seed Co and Mo concentration without adverse effects on seed quality. Two experiments were conducted. First, we investigated foliar and soil Co and Mo application under greenhouse conditions. Next, we validated the results obtained in the first study. The treatments for both experiments consisted of Co doses combined with Mo, and a control without Co and Mo application. The foliar application was more efficient in producing enriched Co and Mo seed; meanwhile, as Co doses increased so did Co and Mo concentrations in the seed. There were no adverse effects on nutrition, development, quality, and yield of parent plants and seed when these micronutrients were applied. The seed showed higher germination, vigor, and uniformity for the development of soybean seedlings. We concluded that the application of 20 g ha-1 Co and 800 g ha-1 Mo via foliar application at the reproductive stage of soybean increased germination rate and achieved the best growth and vigor index of enriched seed.

Residual effects of composted sewage sludge on nitrogen cycling and plant metabolism in a no-till common bean-palisade grass-soybean rotation.

Introduction and aims: In the context of increasing population and decreasing soil fertility, food security is one of humanity's greatest challenges. Large amounts of waste, such as sewage sludge, are produced annually, with their final disposal causing environmental pollution and hazards to human health. Sludge has high amounts of nitrogen (N), and, when safely recycled by applying it into the soil as composted sewage sludge (CSS), its residual effect may provide gradual N release to crops. A field study was conducted in the Brazilian Cerrado. The aims were to investigate the residual effect of successive applications of CSS as a source of N in the common bean (Phaseolus vulgaris L. cv. BRS Estilo)-palisade grass (Urochloa brizantha (A.Rich.) R.D. Webster)-soybean (Glycine max L.) rotation under no-tillage. Additionally, N cycling was monitored through changes in N metabolism; the efficiency of biological N2 fixation (BNF) and its implications for plant nutrition, development, and productivity, was also assessed. Methods: The experiment consisted of a randomized complete block design comparing four CSS rates (10, 15, 20, and 25 Mg ha-1, wet basis) to a control treatment (without adding mineral or organic fertilizer) over two crop years. Multiple plant and soil analyses (plant development and crop yield, Falker chlorophyll index (FCI), enzymatic, biochemical, 15N natural abundance, was evaluated, root and shoot N accumulation, etc.) were evaluated. Results and discussion: Results showed that CSS: i) maintained adequate N levels for all crops, increasing their productivity; ii) promoted efficient BNF, due to the stability of ureide metabolism in plants and increased protein content; iii) increased the nitrate content and the nitrate reductase activity in soybean; iv) affected urease activity and ammonium content due to changes in the plant's urea metabolism; v) increased N accumulation in the aerial part of palisade grass. Composted sewage sludge can be used as an alternative source to meet crops' N requirements, promoting productivity gains and N cycling through forage and improving N metabolism.

Technological Quality of Sugarcane Inoculated with Plant-Growth-Promoting Bacteria and Residual Effect of Phosphorus Rates.

Phosphate fertilization in highly weathered soils has been a major challenge for sugarcane production. The objective of this work was to evaluate the foliar levels of phosphorus (P) and nitrogen (N) and the technological quality and productivity of second ratoon cane as a function of inoculation with plant-growth-promoting bacteria (PGPBs) together with the residual effect of phosphate fertilization. The experiment was carried out at the research and extension farm of Ilha Solteira, state of São Paulo, Brazil. The experiment was designed in a randomized block with three replications in a 5 × 8 factorial scheme. The treatments consisted of five residual doses of phosphorus (0, 45, 90, 135 and 180 kg ha-1 of P2O5, 46% P) applied at planting from the source of triple superphosphate and eight inoculations from three species of PGPB (Azospirillum brasilense, Bacillus subtilis and Pseudomonas fluorescens), applied in single or co-inoculation at the base of stems of sugarcane variety RB92579. Inoculation with PGPBs influenced leaf N concentration, while inoculations with Pseudomonas fluorescens and combinations of bacteria together with the highest doses exerted a positive effect on leaf P concentration. Co-inoculation with A. brasilense + Pseudomonas fluorescens associated with a residual dose of 135 kg ha-1 of P2O5 increased stem productivity by 42%. Thus, it was concluded that inoculations with Pseudomonas fluorescens and their combinations are beneficial for the sugarcane crop, reducing phosphate fertilization and increasing productivity.

Common Bean Productivity and Micronutrients in the Soil-Plant System under Residual Applications of Composted Sewage Sludge.

Composted sewage sludge (CSS) is an organic fertilizer that can be used as a source of micronutrients in agriculture. However, there are few studies with CSS to supply micronutrients for the bean crop. We aimed to evaluate micronutrient concentrations in the soil and their effects on nutrition, extraction, export, and grain yield in response to CSS residual application. The experiment was carried out in the field at Selvíria-MS, Brazil. The common bean cv. BRS Estilo was cultivated in two agricultural years (2017/18 and 2018/19). The experiment was designed in randomized blocks with four replications. Six different treatments were compared: (i) four increasing CSS rates, i.e., CSS5.0 (5.0 t ha-1 of applied CSS, wet basis), CSS7.5, CSS10.0, CSS12.5; (ii) a conventional mineral fertilizer (CF); (iii) a control (CT) without CSS and CF application. The available levels of B, Cu, Fe, Mn, and Zn were evaluated in soil samples collected in the 0-0.2 and 0.2-0.4 m soil surface horizons. The concentration, extraction, and export of micronutrients in the leaf and productivity of common beans were evaluated. The concentration of Cu, Fe, and Mn ranged from medium to high in soil. The available levels of B and Zn in the soil increased with the residual rates of CSS, which were statistically not different from the treatments with CF. The nutritional status of the common bean remained adequate. The common bean showed a higher requirement for micronutrients in the second year. The leaf concentration of B and Zn increased in the CSS7.5 and CSS10.0 treatments. There was a greater extraction of micronutrients in the second year. Productivity was not influenced by the treatments; however, it was higher than the Brazilian national average. Micronutrients exported to grains varied between growing years but were not influenced by treatments. We conclude that CSS can be used as an alternative source of micronutrients for common beans grown in winter.

VITRECTOMY FOR STELLATE NONHEREDITARY IDIOPATHIC FOVEOMACULAR RETINOSCHISIS ASSOCIATED WITH OUTER RETINAL LAYER DEFECT.

PURPOSE: To describe a case of stellate nonhereditary idiopathic foveomacular retinoschisis associated with outer retinal layer defect treated with pars plana vitrectomy, internal limiting membrane removal, and C3F8 tamponade. METHODS: Spectral-domain optical coherence tomography (Heidelberg Engineering, Heidelberg, Germany) scans of a 46-year-old woman with unilateral stellate nonhereditary idiopathic foveomacular retinoschisis were acquired at baseline and 1, 3, 6, and 12 months after surgery. RESULTS: Pars plana vitrectomy was performed after phacoemulsification. The vitreous was circumcised, and the internal limiting membrane was removed with a Tano brush, releasing tangential forces. The patient experienced progressive recovery of the outer retinal layers and improvement of visual acuity during follow-up. CONCLUSION: Stellate nonhereditary idiopathic foveomacular retinoschisis may be associated with outer retinal layer defect and severe vision loss. Pars plana vitrectomy with internal limiting membrane removal and C3F8 infusion seems to be a safe and feasible treatment in such cases, with potentially good anatomical and functional outcome.