RESUMO
Recently, metal-organic frameworks (MOFs) with multifunctional pore chemistry have been intensively investigated for positioning the desired morphology at specific locations onto substrates for manufacturing devices. Herein, we develop a micro-confined interfacial synthesis (MIS) approach for fabrication of a variety of free-standing MOF superstructures with desired shapes. This approach for engineering MOFs provides three key features: 1)â inâ situ synthesis of various free-standing MOF superstructures with controlled compositions, shape, and thickness using a mold membrane; 2)â adding magnetic functionality into MOF superstructures by loading with Fe3 O4 nanoparticles; 3)â transferring the synthesized MOF superstructural array on to flat or curved surface of various substrates. The MIS route with versatile potential opens the door for a number of new perspectives in various applications.
RESUMO
OBJECTIVE: To optimize fluid dynamics through measuring intraocular pressure (IOP) in a venturi phacoemulsification machine in dogs. PROCEDURES: In step I, flow and IOP of the test chamber were measured using a pressure transducer with the bottle height (BH) set at 50, 70, 100, and 120 cm and the vacuum from 30 to 450 mmHg. A 19-gauge phaco and a 0.3-mm irrigation/aspiration (I/A) handpiece were used. In step II, flow and IOP were measured in an enucleated canine eye with a 3.0- and a 3.2-mm clear corneal incision (CCI), respectively. IOP was measured using the pressure transducer at a 30-mmHg vacuum to allow corneal deformation, to define the fluidic parameters for preventing surge. RESULTS: Flow was directly proportional to the BH and vacuum, whereas IOP was directly proportional to the BH and inversely to the vacuum. Flow with an I/A handpiece was significantly less than with a phaco handpiece, explaining why IOP with an I/A handpiece was significantly higher than with a phaco handpiece. With the I/A handpiece, vacuum parameters less than 450 mmHg did not result in corneal deformation. IOP with a 3.2-mm CCI was significantly lower than with a 3.0-mm CCI, with the 3.2-mm flow being greater than the 3.0-mm flow. CONCLUSIONS: BH during the I/A stage could be reduced to avoid unnecessary stress on the canine eye when using a venturi system. Although phacoemulsification with a 3.2-mm CCI could induce lower IOP, a 3.0-mm CCI might lessen the irrigation flow stress on the eye.
Assuntos
Doenças do Cão/cirurgia , Pressão Intraocular , Facoemulsificação/veterinária , Animais , Câmara Anterior/fisiopatologia , Catarata/veterinária , Doenças do Cão/fisiopatologia , Cães , Pressão Intraocular/fisiologia , Facoemulsificação/efeitos adversos , Facoemulsificação/instrumentação , Facoemulsificação/métodosRESUMO
The development of strategies to couple biomolecules covalently to surfaces is necessary for constructing sensing arrays for biological and biomedical applications. One attractive conjugation reaction is hydrazone formation--the reaction of a hydrazine with an aldehyde or ketone--as both hydrazines and aldehydes/ketones are largely bioorthogonal, which makes this particular reaction suitable for conjugating biomolecules to a variety of substrates. We show that the mild reaction conditions afforded by hydrazone conjugation enable the conjugation of DNA and proteins to the substrate surface in significantly higher yields than can be achieved with traditional bioconjugation techniques, such as maleimide chemistry. Next, we designed and synthesized a photocaged aryl ketone that can be conjugated to a surface and photochemically activated to provide a suitable partner for subsequent hydrazone formation between the surface-anchored ketone and DNA- or protein-hydrazines. Finally, we exploit the latent functionality of the photocaged ketone and pattern multiple biomolecules on the same substrate, effectively demonstrating a strategy for designing substrates with well-defined domains of different biomolecules. We expect that this approach can be extended to the production of multiplexed assays by using an appropriate mask with sequential photoexposure and biomolecule conjugation steps.
Assuntos
DNA/química , Hidrazonas/química , Proteínas/química , Aldeídos/química , Hidrazinas/química , Cetonas/química , Propriedades de SuperfícieRESUMO
Nanodumbbell gold nanoparticle (AuNP) dimers connected by DNA show significant change in interparticle distance in the presence of a specific analyte, ATP. The nanodumbbell begins in an extended state, but after the addition of the analyte, the DNA connecting the AuNPs forms a stable hairpin, which causes a large decrease in the interparticle distance.
RESUMO
While the remarkable chemical and biological properties of DNA have been known for decades, these properties have only been imparted into materials with unprecedented function much more recently. The inimitable ability of DNA to form programmable, complex assemblies through stable, specific, and reversible molecular recognition has allowed the creation of new materials through DNA's ability to control a material's architecture and properties. In this review we discuss recent progress in how DNA has brought unmatched function to materials, focusing specifically on new advances in delivery agents, devices, and sensors.
RESUMO
Currently, available medicine does not satisfy the clinical unmet needs of periodontal disease. Therefore, novel drugs with improved efficacy profiles are needed. We previously demonstrated that YH14642, water extracts of Notoginseng Radix and Rehmanniae Radix Preparata, improved probing depths in double-blind phase II clinical trial. However, it still has hurdles for commercialization due to the low efficiency of active compound extraction. To resolve this issue, we developed YH23537 through process optimization to extract active compounds efficiently while still achieving the chemical profile of YH14642. In this study, we investigated the therapeutic effects of YH23537 compared with YH14642 using a canine model of ligature-induced periodontitis. Human gingival fibroblast (hGF) cells were treated with various concentrations of YH23537 or YH14642 with lipopolysaccharide (LPS) for 24 hr. IL-6 and IL-8 levels in the conditioned media were determined using Luminex. Sixteen 3-year-old male beagle dogs had their teeth scaled and polished using a piezo-type ultrasonic scaler under general anesthesia and brushed once daily for the following 2 weeks. Two weeks after the scaling procedure, the left upper second premolar (PM2), third premolar (PM3), and fourth premolar (PM4) as well as the left lower PM3, PM4, and first molar (M1) were ligated with silk-wire twisted ligatures. The dogs were fed with soft moistened food to induce periodontitis for 8 weeks, and the ligatures were then removed. YH23537 and YH14642 were administered for 4 weeks, and clinical periodontal parameters such as plaque index (PI), gingival index (GI), probing depth (PD), clinical attachment level (CAL), and bleeding on probing (BoP) were determined before and 1, 2, 3, and 4 weeks after treatment. YH23537 inhibited IL-6 and IL-8 secretion in a dose-dependent manner in hGF cells stimulated with LPS. The IC50 values for YH23537 were 43 and 54 µg/ml for IL-6 and IL-8, respectively, while the values for YH14642 were 104 and 117 µg/ml, respectively. In the animal study, clinical parameters including GI, PD, CAL, and BoP were significantly increased after 8 weeks of ligature-induced periodontitis. The YH23537 300 and YH23537 900 mg groups had significant improvements in CAL from 1 to 4 weeks after treatment in comparison to the placebo group. GR values in the YH23537 900 mg group were decreased throughout the treatment period. GI values were also reduced significantly after 4-week treatment with 300 and 900 mg of YH23537. YH23537 at 300 mg doses showed comparable efficacy for CAL and GR with 1,000 mg of YH14642. YH23537 showed therapeutic efficacy against periodontitis in dogs, mediated by anti-inflammatory effects. These findings indicate that YH23537 has the potential for further development as a new drug for patients suffering from periodontal disease.
RESUMO
With the high demand for nanoelectronic devices, extensive research has focused on the use of single walled carbon nanotubes (CNTs) due to their high electron carrier mobility, large tensile strength, and single nanometer dimensions. Despite their promise, however, their applicability has been greatly hindered by the inherent difficulties of both separating nanotubes of different chiralities and diameters and positioning them from metallic tubes and positioning them in a precise location on a surface. In recent years, single stranded DNA (ssDNA) has been identified as a potential solution for both of these problems since DNA can be used to both separate the different types of CNTs as well as direct their organization. We demonstrate here the first principles on how to guide CNT assembly directly on surfaces from solution by specific DNA hybridization. It was found that the specific DNA sequence used to disperse the carbon nanotubes greatly influences the adsorption and specificity of nanotube binding to the surface. Furthermore, we demonstrate here that thermal annealing can correct misaligned tubes or incorrect binding. These studies provide an excellent foundation for employing two-dimensional DNA templates for CNT organization for nanoelectronic logic and memory based applications. Furthermore, using a single biomaterial to both sort and place CNTs in minimal steps would greatly help the throughput, manufacturability, and cost of such devices.
Assuntos
DNA/química , Nanotecnologia/métodos , Nanotubos de Carbono/química , Calefação , Nanotubos de Carbono/ultraestruturaRESUMO
As basic research to understand the behavior of droplets on structured surfaces, we investigated droplet movement in a V-shaped groove while the volume of the droplet changes. We developed a model to explain the mechanism of the droplet movement and the effects of the wettability of the inner walls of the groove on the droplet movement. Furthermore, the model predicted new phenomena and explains the effect of the nonhomogeneous wettability on droplet movement. The predictions of the model match the experimental results well. This research can provide the basic knowledge for manipulating droplets with structured surfaces for various applications.
RESUMO
Over the last several decades, phenomena related to critical heat flux (CHF) on structured surfaces have received a large amount of attention from the research community. The purpose of such research has been to enhance the safety and efficiency of a variety of thermal systems. A number of theories have been put forward to explain the key CHF enhancement mechanisms on structured surfaces. However, these theories have not been confirmed experimentally because of limitations in the available visualization techniques and the complexity of the phenomena. To overcome these limitations and elucidate the CHF enhancement mechanism on the structured surfaces, we introduce synchrotron x-ray imaging with high spatial (~2 µm) and temporal (~20,000 Hz) resolutions. This technique has enabled us to confirm that capillary-induced flow is the key CHF enhancement mechanism on structured surfaces.
RESUMO
It is demonstrated that the crystal size of small-molecule organic semiconductors can be controlled during solution shearing by tuning the shape and dimensions of the micropillars on the blade. Increasing the size and spacing of the rectangular pillars increases the crystal size, resulting in higher thin-film mobility. This phenomenon is attributed as the microstructure changing the degree and density of the meniscus line curvature, thereby controlling the nucleation process. The use of allylhybridpolycarbosilane (AHPCS), an inorganic polymer, is also demonstrated as the microstructured blade for solution shearing, which has high resistance to organic solvents, can easily be microstructured via molding, and is flexible and durable. Finally, it is shown that solution shearing can be performed on a curved surface using a curved blade. These demonstrations bring solution shearing closer to industrial applications and expand its applicability to various printed flexible electronics.
RESUMO
This study evaluated the effect of onion extract on corneal haze suppression after applying the air assisted lamellar keratectomy. The air assisted lamellar keratectomy was performed on 24 canine eyes. They were treated with an artificial tear (group C), prednisolone acetate (group P), onion extract (group O) and TGF-ß1 (group T) three times per day from 7 to 28 days after the surgery. Corneal haze occurred on the all eyes and was observed beginning 7 days after the surgery. The haze was significantly decreased in groups P and O from day 14 compared with the group C using the clinical (group P; P=0.021, group O; P=0.037) and objective evaluation method (group P; P=0.021, group O; P=0.039). In contrast, it was significantly increased in group T from day 14 compared with group C based on the clinical (P=0.002) and objective evaluation method (P<0.001). Subsequently, these eyes were enucleated after euthanasia, and immunohistochemistry with α-SMA antibodies was done. The total green intensity for α-SMA was significantly more expressed in group T and significantly less expressed in groups P and O than in group C. Onion extract could have potential as a therapeutic in preventing corneal haze development by suppressing the differentiation of fibroblasts into myofibroblasts.
Assuntos
Córnea/cirurgia , Opacidade da Córnea/tratamento farmacológico , Cães/cirurgia , Cebolas/química , Extratos Vegetais/uso terapêutico , Procedimentos Cirúrgicos Refrativos/veterinária , Ar , Animais , Opacidade da Córnea/etiologia , Procedimentos Cirúrgicos Refrativos/efeitos adversos , Procedimentos Cirúrgicos Refrativos/métodosRESUMO
This study was performed to evaluate changes in intraocular pressure (IOP) during standard coaxial phacoemulsification using 4 different bottle heights (BHs) and 2 different incision sizes. Coaxial phacoemulsification was performed with a venturi-based machine in 8 enucleated canine eyes through 3.0 and 3.2 mm clear corneal incisions (CCIs). A pressure transducer inserted in the peripheral cornea monitored the IOP in real-time. The surgery was subdivided into 4 stages: sculpt-segment removal, irrigation/aspiration, capsular polishing and viscoelastic removal. The mean IOP and the difference between the maximum and minimum IOPs were calculated at each stage and compared. The ultrasound time and volume of irrigation fluid used were recorded. The mean IOP increased with an elevation in the BH. The mean IOP in the irrigation/aspiration stage was significantly higher than that in the sculpt-segment removal stage at the same BH. The difference between the maximum and minimum IOP at each stage was greater in the 3.2 mm than the 3.0 mm CCIs, although the mean IOP was lower with the 3.2 mm than the 3.0 mm CCIs. The ultrasound time and irrigation fluid volume were greater with the 3.2 mm than the 3.0 mm CCIs. Therefore, fluidic parameters during each stage could be reassessed and adjusted to reduce complications arising from an elevated IOP. Phacoemulsification with 3.0 mm CCIs at a lower BH might lead to less stress on the eye from IOP fluctuations, ultrasound energy and irrigation fluid.
Assuntos
Cães/cirurgia , Pressão Intraocular/fisiologia , Facoemulsificação/veterinária , Transdutores de Pressão/veterinária , Animais , Capsulorrexe/veterinária , Cães/fisiologia , Facoemulsificação/métodosRESUMO
The purpose of this study was to evaluate the effect of age on the ratio of pulp cavity/tooth width (P/T ratio) in healthy cats. The dental radiographs of 32 cats (16 males and 16 females) were generated with a digital dental X-ray unit with the animals under general anesthesia. Standardized measurement of the canine teeth was performed by drawing a line on the radiograph perpendicular to the cemento- enamel junction (CEJ) of the tooth. There was an inversely proportional correlation between chronological age and the P/T ratio. Moreover, a strong Pearson squared correlation (γ(2) = 0.92) was identified by the curved regression model. No significant differences in the P/T ratio based on gender or breed were found. These results suggest that determination of age by P/T ratio could be clinically useful for estimating the chronological age of cats.
Assuntos
Determinação da Idade pelos Dentes/veterinária , Gatos/fisiologia , Cavidade Pulpar/diagnóstico por imagem , Dente/diagnóstico por imagem , Animais , Cavidade Pulpar/anatomia & histologia , Feminino , Masculino , Dente/anatomia & histologiaRESUMO
Crystalline silicon nanotubes (Si NTs) provide distinctive advantages as electrical and biochemical analysis scaffolds through their unique morphology and electrical tunability compared to solid nanowires or amorphous/non-conductive nanotubes. Such potential is investigated in this report. Gate-dependent four-probe current-voltage analysis reveals electrical properties such as resistivity to differ by nearly 3 orders of magnitude between crystalline and amorphous Si NTs. Analysis of transistor transfer characteristics yields a field effect mobility of 40.0 cm(2) V(-1) s(-1) in crystalline Si NTs. The hollow morphology also allows selective inner/outer surface functionalization and loading capability either as a carrier for molecular targets or as a nanofluidic channel for biomolecular assays. We present for the first time a demonstration of internalization of fluorescent dyes (rhodamine) and biomolecules (BSA) in Si NTs as long as 22 µm in length.
Assuntos
Corantes Fluorescentes/química , Nanotubos/química , Soroalbumina Bovina/química , Silício/química , Transistores Eletrônicos , Animais , Bovinos , Cristalização , Nanofios/química , Rodaminas/química , Soroalbumina Bovina/metabolismoRESUMO
In the last decade, "small" and "integrated" have been keywords in the field of device fabrication as the desire to exploit nanoscale phenomena and make electronic, photonic and magnetic arrays has grown. In an effort to improve resolution and control costs, much work has been dedicated to developing alternatives to conventional microfabrication technology. For this purpose, biomolecular assembly and DNA nanotechnology in particular are appealing owing to their inherent size and capacity for molecular recognition. Herein, we review recent achievements in DNA-based directed assembly on substrates. These include novel methods for patterning and depositing nanomaterials on DNA-modified surfaces as well as using synthetic DNA nanostructures such as DNA tiles and origami as templates to direct the assembly of nanoscale components. Particular attention is paid to integrating self-assembly with top-down lithography, and some possible directions for future work are discussed.
Assuntos
DNA/química , Nanoestruturas/química , Miniaturização , Propriedades de SuperfícieRESUMO
With the increasing demand in recent years for high-performance devices for both energy and health applications, there has been extensive research to direct the assembly of nanoparticles into meso- or macroscale single two- and three-dimensional crystals of arbitrary configuration or orientation. Inorganic nanoparticle arrays can have intriguing physical properties that differ from either individual nanoparticles or bulk materials. For most device applications, it is necessary to fabricate two-dimensional nanoparticle superlattices at programmed sites on a surface. However, it has remained a significant challenge to generate patterned arrays with long-range positional order because most highly ordered close-packed nanocrystal arrays are typically obtained by kinetically driven evaporation processes. In this report, we demonstrate a method to generate patterned nanocrystal superlattices by confining nanoparticles to geometrically defined 2-D DNA sites on a surface and using associative biomolecular interparticle interactions to produce thermodynamically stable arrays of hexagonally packed nanocrystals with significant long-range order observed over 1-2 µm. We also demonstrate the role of chemical and geometrical confinement on particle packing and obtaining long-range order. Finally, we also demonstrate that the formation of DNA-mediated nanocrystal superlattices requires both interparticle DNA hybridization and solvent-less thermal annealing.
Assuntos
DNA/química , Nanopartículas/química , Nanotecnologia/métodos , Adsorção , Sítios de Ligação , Dimetilpolisiloxanos/química , Ouro/química , Microscopia Eletrônica de Varredura , Propriedades de Superfície , TermodinâmicaRESUMO
One of the most challenging but potentially rewarding goals in nanoscience is the ability to direct the assembly of nanoscale materials into functional architectures with high yields, minimal steps, and inexpensive procedures. Despite their unique physical properties, the inherent difficulties of engineering wafer-level arrays of useful devices from nanoscale materials in a cost-effective manner have provided serious roadblocks toward technological impact. To address nanoscale features while still maintaining low fabrication costs, we demonstrate here an inexpensive printing method that enables repeated patterning of large-area arrays of nanoscale materials. DNA strands were patterned over 4 mm areas with 50 nm resolution by a soft-lithographic subtraction printing process, and DNA hybridization was used to direct the assembly of sub-20 nm materials to create highly ordered two-dimensional nanoparticle arrays. The entire printing and assembly process was accomplished in as few as three fabrication steps and required only a single lithographically templated silicon master that could be used repeatedly. The low-cost procedures developed to generate nanoscale DNA patterns can be easily extended toward roll-to-roll assembly of nanoscale materials with sub-50 nm resolution and fidelity.