Design and synthesis of multigrain nanocrystals via geometric misfit strain.

The impact of topological defects associated with grain boundaries (GB defects) on the electrical, optical, magnetic, mechanical and chemical properties of nanocrystalline materials1,2 is well known. However, elucidating this influence experimentally is difficult because grains typically exhibit a large range of sizes, shapes and random relative orientations3-5. Here we demonstrate that precise control of the heteroepitaxy of colloidal polyhedral nanocrystals enables ordered grain growth and can thereby produce material samples with uniform GB defects. We illustrate our approach with a multigrain nanocrystal comprising a Co3O4 nanocube core that carries a Mn3O4 shell on each facet. The individual shells are symmetry-related interconnected grains6, and the large geometric misfit between adjacent tetragonal Mn3O4 grains results in tilt boundaries at the sharp edges of the Co3O4 nanocube core that join via disclinations. We identify four design principles that govern the production of these highly ordered multigrain nanostructures. First, the shape of the substrate nanocrystal must guide the crystallographic orientation of the overgrowth phase7. Second, the size of the substrate must be smaller than the characteristic distance between the dislocations. Third, the incompatible symmetry between the overgrowth phase and the substrate increases the geometric misfit strain between the grains. Fourth, for GB formation under near-equilibrium conditions, the surface energy of the shell needs to be balanced by the increasing elastic energy through ligand passivation8-10. With these principles, we can produce a range of multigrain nanocrystals containing distinct GB defects.

In Situ Quantification of Interactions between Charged Nanorods in a Predefined Potential Energy Landscape.

Quantitative understanding of nanoscale interactions is a prerequisite for harnessing the remarkable collective properties of nanoparticle systems. Here, we report the combined use of liquid-phase transmission electron microscopy and electron beam lithography to elucidate the interactions between charged nanorods in a predefined potential energy landscape. In situ site-selective lift-off of surface-functionalized lithographed gold nanorods is achieved by patterning them with adhesion layer materials that undergo etching at different rates. Analysis of the subsequent nanorod motion, which is two-dimensionally confined as a result of the particle-substrate attraction, allows quantification of interparticle interactions in a lithographically engineered environment. For lithographed nanorods patterned with the same adhesion layer material, their self-assembly behavior following lift-off is tuned by changing their starting spatial arrangement. Our approach facilitates investigation of interparticle interactions in designed nanoparticle systems and affords fundamental insights into the role of the potential energy landscape in determining the kinetic pathway for nanoparticle self-assembly.

Carbon Dioxide Dimer Radical Anion as Surface Intermediate of Photoinduced CO2 Reduction at Aqueous Cu and CdSe Nanoparticle Catalysts by Rapid-Scan FT-IR Spectroscopy.

Monitoring of visible light sensitized reduction of CO2 at Cu nanoparticles in aqueous solution by rapid-scan ATR FT-IR spectroscopy on the time scale of seconds allowed structural identification of a one-electron intermediate and demonstrated its kinetic relevancy for the first time. Isotopic labeling (12C: 1632, 1358, 1346 cm-1; 13C: 1588, 1326, 1316 cm-1) revealed a species of carbon dioxide dimer radical anion structure, most likely bound to the catalyst surface through carbon. Intermediacy of Cu-C(═O)OCO2- surface species is in agreement with a recently proposed mechanism for electrocatalytic CO2 reduction at Cu metal nanoparticles based on Tafel slope analysis. Spontaneous decrease of the intermediate after termination of the photosensitization pulse (Sn porphyrin excited at 405 nm) was accompanied by the growth of HCO3-. CO was produced as well, but sensitive detection required photolysis for tens of minutes. A direct kinetic link between a C2O4- surface intermediate and the CO product was also demonstrated for photocatalyzed CO2 reduction at aqueous CdSe nanoparticles, where first order growth of a Cd-C(═O)OCO2- species was accompanied by rise of CO (monitored by a fast Ni complex trap) and HCO3- showing a distinct induction period. The detection of the one-electron surface intermediate and confirmation of its catalytic relevancy was enabled by the delivery of electrons one-by-one by the photosensitization method. The observation of carbon dioxide dimer radical anion points to approaches for rate enhancements of heterogeneous CO2 reduction by creating catalytic environments that favor formation of this intermediate.

Hybrid Cellular Nanosheets for High-Performance Lithium-Ion Battery Anodes.

We report a simple synthetic method of carbon-based hybrid cellular nanosheets that exhibit outstanding electrochemical performance for many key aspects of lithium-ion battery electrodes. The nanosheets consist of close-packed cubic cavity cells partitioned by carbon walls, resembling plant leaf tissue. We loaded carbon cellular nanosheets with SnO2 nanoparticles by vapor deposition method and tested the performance of the resulting SnO2-carbon nanosheets as anode materials. The specific capacity is 914 mAh g(-1) on average with a retention of 97.0% during 300 cycles, and the reversible capacity is decreased by only 20% as the current density is increased from 200 to 3000 mA g(-1). In order to explain the excellent electrochemical performance, the hybrid cellular nanosheets were analyzed with cyclic voltammetry, in situ X-ray absorption spectroscopy, and transmission electron microscopy. We found that the high packing density, large interior surface area, and rigid carbon wall network are responsible for the high specific capacity, lithiation/delithiation reversibility, and cycling stability. Furthermore, the nanosheet structure leads to the high rate capability due to fast Li-ion diffusion in the thickness direction.

Multifunctional Fe3O4/TaO(x) core/shell nanoparticles for simultaneous magnetic resonance imaging and X-ray computed tomography.

Multimodal imaging is highly desirable for accurate diagnosis because it can provide complementary information from each imaging modality. In this study, a sol-gel reaction of tantalum(V) ethoxide in a microemulsion containing Fe(3)O(4) nanoparticles (NPs) was used to synthesize multifunctional Fe(3)O(4)/TaO(x) core/shell NPs, which were biocompatible and exhibited a prolonged circulation time. When the NPs were intravenously injected, the tumor-associated vessel was observed using computed tomography (CT), and magnetic resonance imaging (MRI) revealed the high and low vascular regions of the tumor.

Large-scale synthesis of bioinert tantalum oxide nanoparticles for X-ray computed tomography imaging and bimodal image-guided sentinel lymph node mapping.

Ever since Au nanoparticles were developed as X-ray contrast agents, researchers have actively sought alternative nanoparticle-based imaging probes that are not only inexpensive but also safe for clinical use. Herein, we demonstrate that bioinert tantalum oxide nanoparticles are suitable nanoprobes for high-performance X-ray computed tomography (CT) imaging while simultaneously being cost-effective and meeting the criteria as a biomedical platform. Uniformly sized tantalum oxide nanoparticles were prepared using a microemulsion method, and their surfaces were readily modified using various silane derivatives through simple in situ sol-gel reaction. The silane-modified surface enabled facile immobilization of functional moieties such as polyethylene glycol (PEG) and fluorescent dye. PEG was introduced to endow the nanoparticles with biocompatibility and antifouling activity, whereas immobilized fluorescent dye molecules enabled simultaneous fluorescence imaging as well as X-ray CT imaging. The resulting nanoparticles exhibited remarkable performances in the in vivo X-ray CT angiography and bimodal image-guided lymph node mapping. We also performed an extensive study on in vivo toxicity of tantalum oxide nanoparticles, revealing that the nanoparticles did not affect normal functioning of organs.

Epitaxially Strained CeO2 /Mn3 O4 Nanocrystals as an Enhanced Antioxidant for Radioprotection.

Nanomaterials with antioxidant properties are promising for treating reactive oxygen species (ROS)-related diseases. However, maintaining efficacy at low doses to minimize toxicity is a critical for clinical applications. Tuning the surface strain of metallic nanoparticles can enhance catalytic reactivity, which has rarely been demonstrated in metal oxide nanomaterials. Here, it is shown that inducing surface strains of CeO2 /Mn3 O4 nanocrystals produces highly catalytic antioxidants that can protect tissue-resident stem cells from irradiation-induced ROS damage. Manganese ions deposited on the surface of cerium oxide (CeO2 ) nanocrystals form strained layers of manganese oxide (Mn3 O4 ) islands, increasing the number of oxygen vacancies. CeO2 /Mn3 O4 nanocrystals show better catalytic activity than CeO2 or Mn3 O4 alone and can protect the regenerative capabilities of intestinal stem cells in an organoid model after a lethal dose of irradiation. A small amount of the nanocrystals prevents acute radiation syndrome and increases the survival rate of mice treated with a lethal dose of total body irradiation.

Two-year clinical effectiveness of adhesives and retention form on resin composite restorations of non-carious cervical lesions.

The current study investigated the clinical effectiveness of three adhesives and the use of retention form in Class V resin composite restorations of the non-carious cervical lesion (NCCL) over a two-year period. One-hundred and fifty NCCLs in 39 patients were restored with resin composites according to six experimental protocols combining the presence or absence of retention form and three adhesives: ScotchBond Multi-Purpose (MP, 3M ESPE), an experimental adhesive (EX, Vericom) and Adper Prompt (AP, 3M ESPE). All restorations were evaluated at baseline, 6, 12 and 24 months. Modified United States Public Health Service (USPHS) criteria were used to evaluate the restorations. MP was found to have significantly superior marginal adaptation than AP in cumulative logistic regression analysis (odds ratio, 2.12; 95% confidence interval, 1.05-4.31; p = 0.0397). In analysis using the Pearson's Chi-square or Fisher's Exact Test to compare the clinical performance of restorations with and without retention form, EX with retention form showed a significantly higher retention rate at two years than that without retention form (p = 0.0089). Restorations with retention form also showed significantly less marginal discoloration than those without retention form in all three adhesives (p = 0.0336).

Trap Passivation in Indium-Based Quantum Dots through Surface Fluorination: Mechanism and Applications.

Treatment of InP colloidal quantum dots (QDs) with hydrofluoric acid (HF) has been an effective method to improve their photoluminescence quantum yield (PLQY) without growing a shell. Previous work has shown that this can occur through the dissolution of the fluorinated phosphorus and subsequent passivation of indium on the reconstructed surface by excess ligands. In this article, we demonstrate that very significant luminescence enhancements occur at lower HF exposure though a different mechanism. At lower exposure to HF, the main role of the fluoride ions is to directly passivate the surface indium dangling bonds in the form of atomic ligands. The PLQY enhancement in this case is accompanied by red shifts of the emission and absorption peaks rather than blue shifts caused by etching as seen at higher exposures. Density functional theory shows that the surface fluorination is thermodynamically preferred and that the observed spectral characteristics might be due to greater exciton delocalization over the outermost surface layer of the InP QDs as well as alteration of the optical oscillator strength by the highly electronegative fluoride layer. Passivation of surface indium with fluorides can be applied to other indium-based QDs. PLQY of InAs QDs could also be increased by an order of magnitude via fluorination. We fabricated fluorinated InAs QD-based electrical devices exhibiting improved switching and higher mobility than those of 1,2-ethanedithiol cross-linked QD devices. The effective surface passivation eliminates persistent photoconductivity usually found in InAs QD-based solid films.

Direct Organization of Morphology-Controllable Mesoporous SnO2 Using Amphiphilic Graft Copolymer for Gas-Sensing Applications.

A simple and flexible strategy for controlled synthesis of mesoporous metal oxide films using an amphiphilic graft copolymer as sacrificial template is presented and the effectiveness of this approach for gas-sensing applications is reported. The amphiphilic graft copolymer poly(vinyl chloride)-g-poly(oxyethylene methacrylate) (PVC-g-POEM) is used as a sacrificial template for the direct synthesis of mesoporous SnO2. The graft copolymer self-assembly is shown to enable good control over the morphology of the resulting SnO2 layer. Using this approach, mesoporous SnO2 based sensors with varied porosity are fabricated in situ on a microheater platform. This method reduces the interfacial contact resistance between the chemically sensitive materials and the microheater, while a simple fabrication process is provided. The sensors show significantly different gas-sensing performances depending on the SnO2 porosity, with the highly mesoporous SnO2 sensor exhibiting high sensitivity, low detection limit, and fast response and recovery toward hydrogen gas. This printable solution-based method can be used reproducibly to fabricate a variety of mesoporous metal oxide layers with tunable morphologies on various substrates for high-performance applications.

Ultrafast carrier thermalization and trapping in silicon-germanium alloy probed by extreme ultraviolet transient absorption spectroscopy.

Semiconductor alloys containing silicon and germanium are of growing importance for compact and highly efficient photonic devices due to their favorable properties for direct integration into silicon platforms and wide tunability of optical parameters. Here, we report the simultaneous direct and energy-resolved probing of ultrafast electron and hole dynamics in a silicon-germanium alloy with the stoichiometry Si0.25Ge0.75 by extreme ultraviolet transient absorption spectroscopy. Probing the photoinduced dynamics of charge carriers at the germanium M4,5-edge (∼30 eV) allows the germanium atoms to be used as reporter atoms for carrier dynamics in the alloy. The photoexcitation of electrons across the direct and indirect band gap into conduction band (CB) valleys and their subsequent hot carrier relaxation are observed and compared to pure germanium, where the Ge direct [Formula: see text] and Si0.25Ge0.75 indirect gaps ([Formula: see text]) are comparable in energy. In the alloy, comparable carrier lifetimes are observed for the X, L, and Γ valleys in the conduction band. A midgap feature associated with electrons accumulating in trap states near the CB edge following intraband thermalization is observed in the Si0.25Ge0.75 alloy. The successful implementation of the reporter atom concept for capturing the dynamics of the electronic bands by site-specific probing in solids opens a route to study carrier dynamics in more complex materials with femtosecond and sub-femtosecond temporal resolution.

Direct and simultaneous observation of ultrafast electron and hole dynamics in germanium.

Understanding excited carrier dynamics in semiconductors is crucial for the development of photovoltaics and efficient photonic devices. However, overlapping spectral features in optical pump-probe spectroscopy often render assignments of separate electron and hole carrier dynamics ambiguous. Here, ultrafast electron and hole dynamics in germanium nanocrystalline thin films are directly and simultaneously observed by ultrafast transient absorption spectroscopy in the extreme ultraviolet at the germanium M4,5 edge. We decompose the spectra into contributions of electronic state blocking and photo-induced band shifts at a carrier density of 8 × 1020 cm-3. Separate electron and hole relaxation times are observed as a function of hot carrier energies. A first-order electron and hole decay of ∼1 ps suggests a Shockley-Read-Hall recombination mechanism. The simultaneous observation of electrons and holes with extreme ultraviolet transient absorption spectroscopy paves the way for investigating few- to sub-femtosecond dynamics of both holes and electrons in complex semiconductor materials and across junctions.

A simple synthesis of urchin-like Pt-Ni bimetallic nanostructures as enhanced electrocatalysts for the oxygen reduction reaction.

The synthesis of urchin-like Pt-Ni bimetallic nanostructures is achieved by a controlled one-pot synthesis. Pt-Ni nanostructures have superior oxygen reduction reaction activities in both with and without specific anion adsorption electrolytes due to the geometric and alloying effects.

Engineered collagen hydrogels for the sustained release of biomolecules and imaging agents: promoting the growth of human gingival cells.

We present here the in vitro release profiles of either fluorescently labeled biomolecules or computed tomography contrast nanoagents from engineered collagen hydrogels under physiological conditions. The collagen constructs were designed as potential biocompatible inserts into wounded human gingiva. The collagen hydrogels were fabricated under a variety of conditions in order to optimize the release profile of biomolecules and nanoparticles for the desired duration and amount. The collagen constructs containing biomolecules/nanoconstructs were incubated under physiological conditions (ie, 37°C and 5% CO2) for 24 hours, and the release profile was tuned from 20% to 70% of initially loaded materials by varying the gelation conditions of the collagen constructs. The amounts of released biomolecules and nanoparticles were quantified respectively by measuring the intensity of fluorescence and X-ray scattering. The collagen hydrogel we fabricated may serve as an efficient platform for the controlled release of biomolecules and imaging agents in human gingiva to facilitate the regeneration of oral tissues.

Galvanic replacement reactions in metal oxide nanocrystals.

Galvanic replacement reactions provide a simple and versatile route for producing hollow nanostructures with controllable pore structures and compositions. However, these reactions have previously been limited to the chemical transformation of metallic nanostructures. We demonstrated galvanic replacement reactions in metal oxide nanocrystals as well. When manganese oxide (Mn3O4) nanocrystals were reacted with iron(II) perchlorate, hollow box-shaped nanocrystals of Mn3O4/γ-Fe2O3 ("nanoboxes") were produced. These nanoboxes ultimately transformed into hollow cagelike nanocrystals of γ-Fe2O3 ("nanocages"). Because of their nonequilibrium compositions and hollow structures, these nanoboxes and nanocages exhibited good performance as anode materials for lithium ion batteries. The generality of this approach was demonstrated with other metal pairs, including Co3O4/SnO2 and Mn3O4/SnO2.