Preclinical Performance Evaluation of a Robotic Endoscope for Non-Contact Laser Surgery.

Despite great efforts, transoral robotic laser surgery has not been established clinically. Patient benefits are yet to be proven to accept shortcomings of robotic systems. In particular, laryngeal reachability and transition from microscope to accurate endoscopic laser ablation have not been achieved. We have addressed those challenges with a highly integrated robotic endoscope for non-contact endolaryngeal laser surgery. The current performance status has been assessed in multi-level user studies. In addition, the system was deployed to an ex vivo porcine larynx. The robotic design comprises an extensible continuum manipulator with multifunctional tip. The latter features laser optics, stereo vision, and illumination. Vision-based performance assessment is derived from depth estimation and scene tracking. Novices and experts (n = 20) conducted teleoperated delineation tasks to mimic laser ablation of delicate anatomy. Delineation with motion-compensated and raw endoscopic visualisation was carried out on planar and non-planar nominal patterns. Root mean square tracing errors of less than 0.75 mm were feasible with task completion times below 45 s. Relevant anatomy in the porcine larynx was exposed successfully. Accuracy and usability of the integrated platform bear potential for dexterous laser manipulation in clinical settings. Cadaver and in vivo animal studies may translate ex vivo findings.

Percutaneous inner-ear access via an image-guided industrial robot system.

Image-guided robots have been widely used for bone shaping and percutaneous access to interventional sites. However, due to high-accuracy requirements and proximity to sensitive nerves and brain tissues, the adoption of robots in inner-ear surgery has been slower. In this paper the authors present their recent work towards developing two image-guided industrial robot systems for accessing challenging inner-ear targets. Features of the systems include optical tracking of the robot base and tool relative to the patient and Kalman filter-based data fusion of redundant sensory information (from encoders and optical tracking systems) for enhanced patient safety. The approach enables control of differential robot positions rather than absolute positions, permitting simplified calibration procedures and reducing the reliance of the system on robot calibration in order to ensure overall accuracy. Lastly, the authors present the results of two phantom validation experiments simulating the use of image-guided robots in inner-ear surgeries such as cochlear implantation and petrous apex access.

Droplet applicator module for reproducible and controlled endoscopic laryngeal adductor reflex stimulation.

This work presents a droplet applicator module to generate stable droplets with different muzzle energies for the reproducible endoscopic stimulation of the laryngeal adductor reflex (LAR). The LAR is a protective reflex of the human larynx; an abnormal LAR performance may cause aspiration pneumonia. A pathological LAR can be detected by evaluating its onset latency. The reflex can be triggered by shooting a droplet onto the laryngeal mucosa, which is referred to as Microdroplet Impulse Testing of the LAR (MIT-LAR). Stimulation intensity variation is desired as the reflex threshold may vary inter-individually. The kinetic energy of a droplet after detachment from the nozzle, i.e., its muzzle energy, is considered an appropriate metric for the LAR stimulation intensity. In this work, a suitable nozzle channel geometry is identified based on the experimental evaluation of droplet formation using three different nozzle channel geometries. Two nontoxic additives are evaluated regarding their effect on fluid properties and droplet formation. The range of achievable droplet muzzle energies is determined by high-speed cinematography in association with a physically motivated model of the macroscopic droplet motion. The experimental results show that sodium chloride is a suitable additive to enhance droplet stability in the studied parameter range with the proposed system. Droplet muzzle energy variation from 0.02 µ J to 1.37 µ J was achieved while preserving the formation of a single stimulation droplet. These results are an important prerequisite for a safe and reproducible LAR stimulation by MIT-LAR, which could also help to further elucidate the physiological mechanisms underlying this laryngeal reflex.

Experiments on robot-assisted navigated drilling and milling of bones for pedicle screw placement.

BACKGROUND: This article presents experimental results for robot-assisted navigated drilling and milling for pedicle screw placement. The preliminary study was carried out in order to gain first insights into positioning accuracies and machining forces during hands-on robotic spine surgery. Additionally, the results formed the basis for the development of a new robot for surgery. METHODS: A simplified anatomical model is used to derive the accuracy requirements. The experimental set-up consists of a navigation system and an impedance-controlled light-weight robot holding the surgical instrument. The navigation system is used to position the surgical instrument and to compensate for pose errors during machining. Holes are drilled in artificial bone and bovine spine. A quantitative comparison of the drill-hole diameters was achieved using a computer. RESULTS: The interaction forces and pose errors are discussed with respect to the chosen machining technology and control parameters. Within the technological boundaries of the experimental set-up, it is shown that the accuracy requirements can be met and that milling is superior to drilling. CONCLUSIONS: It is expected that robot assisted navigated surgery helps to improve the reliability of surgical procedures. Further experiments are necessary to take the whole workflow into account.