Umpolung Isomerization in Radical Copolymerization of Benzyl Vinyl Ether with Pentafluorophenylacrylate Leading to Degradable AAB Periodic Copolymers.

This study revealed that benzyl vinyl ether (BnVE) shows a peculiar isomerization propagation in its radical copolymerization with an electron-deficient acrylate carrying a pentafluorophenyl group (PFA). The co-monomer pair inherently exhibits the cross-over propagation feature due to the large difference in the electron density. However, the radical species of PFA was found to undergo a backward isomerization to the penultimate BnVE pendant giving a benzyl radical species prior to propagation with BnVE. The isomerization brings a drastic change in the character of the growing radical species from electrophilic to nucleophilic, and thus the isomerized benzyl radial species propagates with PFA. Consequently, the two monomers were consumed in the order AAB (A: PFA; B: BnVE) and the unique periodic consumption was confirmed by the pseudo-reactivity ratios calculated by the penultimate model: r11 =0.174 and r21 =6600 for PFA (M1 ) with BnVE (M2 ). The pentafluorophenyl ester groups of the resulting copolymers are transformed into ester and amide groups by post-polymerization alcoholysis and aminolysis modifications. The unique isomerization in the AAB sequence allowed the periodic introduction of a benzyl ether structure in the backbone leading to efficient degradation under acid conditions.

Enzyme-Like Catalysis of Vinyl Copolymer Carrying Boron Directly Connected to Backbone: Catalytic Esterification through Cooperation of Boron with Neighboring Carboxylic Anhydride.

Alternating-rich copolymer of vinylboronic acid pinacol ester (VBpin) and maleic anhydride (MAH) was found to catalyze direct dehydrative esterification of carboxylic acid and alcohol. The key to the catalytic function is the activation of the MAH unit by the neighboring Lewis acidic boron directly connected to the backbone through the formation of five-membered ring. The effects of the side-chain cooperation were clarified through comparisons with the polymers having similar structures and a conventional titanium catalyst as well as the analyses of reactions with carboxylic acid or alcohol. The catalytic activity was enhanced as the molecular weight was higher, which is owing to the structural feature that boron is directly attached to the backbone. The cooperative catalysis is of interest because of its conceptual similarity with enzyme.

Rapid and Selective Photo-degradation of Polymers: Design of an Alternating Copolymer with an o-Nitrobenzyl Ether Pendant.

The development of polymers with on-demand degradability is required to alleviate the current global issues on polymer-waste pollution. Therefore, we designed a vinyl ether monomer with an o-nitrobenzyl (oNBn) group as a photo-deprotectable pendant (oNBnVE) and synthesized an alternating copolymer with an oNBn-capped acetal backbone via cationic copolymerization with p-tolualdehyde (pMeBzA). The resultant alternating copolymer could be rapidly degraded into lower-molecular-weight compounds upon simple exposure to UV irradiation without any reactants or catalysts, while it was sufficiently stable toward heat and ambient light. This degradation proceeds via cleavage of the hemiacetal structure generated upon photo-deprotection of the oNBn pendant. The oNBn-peculiar degradability allowed the exclusive photo-degradation of the oNBnVE/pMeBzA segments in a diblock copolymer composed of oNBnVE/pMeBzA and benzyl vinyl ether (BnVE)/pMeBzA segments.

Photocatalyzed Hydrogen Atom Transfer Degradation of Vinyl Polymers: Cleavage of a Backbone C-C Bond Triggered by Radical Activation of a C-H Bond in a Pendant.

In this work, we achieved a triggering degradation of polymers composed of carbon-carbon (C-C) bonded backbone without relying on introduction of labile heteroatom-based bond. The crucial point for the achievement is using vinyl ether (VE) as a comonomer in radical copolymerization of (meth)acrylate for introduction of the carbon-hydrogen (C-H) bonds active for photocatalyzed hydrogen atom transfer (HAT) as triggers in the pendant. Interestingly, methyl methacrylate (MMA)-n-butyl vinyl ether (NBVE) copolymer underwent degradation in acetonitrile in the presence of benzophenone (Ph2 CO) under UV irradiation at 80 °C. The degradation did not take place, when any one of UV, Ph2 CO, heat, and NBVE unit was removed or HAT-active solvent such as toluene and 1,4-dioxane was used. These control experiments strongly supported the HAT-triggering degradation. Furthermore, the degradation behaviors of the copolymers with other vinyl ethers such as tert-butyl vinyl ether and methyl isopropenyl ether indicated that the C-H bond neighboring to oxygen on the pendant is mainly responsible for the trigger leading to degradation. The HAT-triggering degradation was also demonstrated even with the acrylate-based copolymer.

Stereospecific Radical Polymerization of a Side-Chain Transformable Bulky Acrylamide Monomer and Subsequent Post-Polymerization Modification for Syntheses of Isotactic Polyacrylate and Polyacrylamide.

We report syntheses of isotactic polyacrylate and polyacrylamide via a stereospecific radical polymerization of a pendant-transformable monomer, acrylamide carrying isopropyl-substituted ureidosulfonamide (1), followed by post-polymerization modification (PPM). The study in the alcoholysis and aminolysis reactions of the model compound (2) for evaluation of the transformation ability of the electron-withdrawing pendant group on the repeating unit 1 revealed the following points: the pendant of the polymer became more reactive than that of monomer; the pendant was active enough for aminolysis reaction affording the amide compound quantitatively without additive/catalyst; the addition of a lithium triflate [Li(OTf)] and triethylamine (Et3 N) was effective as for promotion of the alcoholysis reaction. Poly(methyl acrylate) (PMA) was quantitatively obtained via the radical polymerization of 1 in the presence of Li(OTf) at 60 °C and the subsequent addition of methanol along with Et3 N. Thus-obtained PMA showed higher isotacticity [m=74 %] than that directly obtained via radical polymerization of methyl acrylate (MA) (m=51 %). The isotacticity was further increased as the temperature and monomer concentration were lower, and eventually m was increased up to 93 %. The aminolysis PPM after the iso-specific radical polymerization of 1 gave various isotactic polyacrylamides carrying different alkyl pendant groups, including poly(N-isopropylacrylamide) (PNIPAM).

A Transformable and Bulky Methacrylate Monomer That Enables the Synthesis of an MMA-nBA Alternating Copolymer: Sequence-Dependent Self-Healing Properties.

In this study, we designed a methacrylate molecule with an alkyl-substituted trichloro salicylic acid pendant as a transformable bulky monomer to enable the synthesis of an alternating copolymer of methyl methacrylate (MMA) and n-butyl acrylate (nBA). The adamantyl-substituted methacrylate monomer (1-Ad) showed very low homopolymerization propensity in radical polymerizations, but afforded the alternating copolymer with nBA via copolymerization. The 1-Ad units in the resultant copolymer were quantitatively and selectively transformed into MMA via transesterification with methanol to yield the alternating copolymer of MMA and nBA. Its alternating sequence was clearly demonstrated by a structural analysis via 13 C NMR spectroscopy as well as the low reactivity ratios for the 1-Ad and nBA pair. Finally, we verified the superior self-healing ability of the alternating copolymer compared to that of the corresponding 1 : 1 statistical copolymer.

Homopolymer-block-Alternating Copolymers Composed of Acrylamide Units: Design of Transformable Divinyl Monomers and Sequence-Specific Thermoresponsive Properties.

In this work, we synthesized an acrylamide-based terpolymer that is a block copolymer composed of an AB alternating copolymer and a C homopolymer. The key to the unprecedented achievement is rational design of an acrylate-acrylamide divinyl monomer carrying CF3-substituted salicylic acid ester bonds (AAm-CF3) to realize the efficient and selective cyclopolymerization as well as the quantitative transformation of the resultant cyclorepeating units. The selectivity in the cyclopolymerization and the pendant transformation ability were evaluated through reactivity ratios of the corresponding model monomers and quantitative aminolysis reactions of the model compound. The cyclopolymerization via the photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) process with a macrochain-transfer agent and subsequent aminolysis reaction afforded the homopolymer-block-alternating copolymer. The sequence-controlled terpolymer exhibited a very unique thermal response behavior in water that was strikingly different from the corresponding sequence-uncontrolled terpolymers, such as homopolymer-block-statistical copolymers and all statistical terpolymers, despite the fact that the structure cannot be distinguished by 1H NMR.

Ouzo phase occurrence with alternating lipo/hydrophilic copolymers in water.

Selection of monomer couples, ensuring reactivity ratios close to zero, is an effective strategy to induce spontaneous copolymerization into an alternating sequence. In addition, monomer design and customisation of the solvent-monomer interactions open the way to functional copolymers showing molecular self-assembly relevant to their regular amphipathic structure. In this work, we show that the design of comonomers with adequate reactivities and interactions can be used to direct copolymer self-assembly on a mesoscopic scale. We investigate spontaneous formation of nanoparticles through solvent/non-solvent interactions using the so-called "ouzo effect". In this way, an ouzo diagram was built to determine the operation window for the self-assembly, in aqueous suspensions, of alternating copolymers consisting of vinyl phenol and maleimide units carrying long alkyl-pendant groups (C12H25 or C18H37). Also, investigations were pursued to account for the influence of the lateral lipophilic pendant units on the size and structure of the nanoaggregates formed during one-shot water addition. Structure characterisation by light scattering techniques (DLS and SLS), small-angle neutron scattering (SANS) and transmission electron microscopy (cryo-TEM and TEM) confirmed the self-assembly of copolymer chains into nanoparticles (size range: 60-300 nm), the size of which is affected by the lipophilicity of the alternating copolymers, solvent-water affinity and the solvent diffusion in water. Altogether, we present here the spontaneous ouzo effect as a simple method to produce stable alternating copolymer nanoparticles in water without the addition of stabilizing agents.

Unprecedented Sequence Control and Sequence-Driven Properties in a Series of AB-Alternating Copolymers Consisting Solely of Acrylamide Units.

Herein, we report a method to synthesize a series of alternating copolymers that consist exclusively of acrylamide units. Crucial to realizing this polymer synthesis is the design of a divinyl monomer that contains acrylate and acrylamide moieties connected by two activated ester bonds. This design, which is based on the reactivity ratio of the embedded vinyl groups, allows a "selective" cyclopolymerization, wherein the intramolecular and intermolecular propagation are repeated alternately under dilute conditions. The addition of an amine to the resulting cyclopolymers afforded two different acryl amide units, i.e., an amine-substituted acryl amide and a 2-hydroxy-ethyl-substituted acryl amide in alternating sequence. Using this method, we could furnish ten types of alternating copolymers; some of these exhibit unique properties in solution and in the bulk, which are different from those of the corresponding random copolymers, and we attributed the differences to the alternating sequence.

An Alkenyl Boronate as a Monomer for Radical Polymerizations: Boron as a Guide for Chain Growth and as a Replaceable Side Chain for Post-Polymerization Transformation.

The ability of isopropenyl boronate pinacol ester to serve as a monomer in radical polymerizations was established and exploited for the synthesis of polymers that are difficult to access using other polymerization techniques. Although the monomer exhibits an α-methyl-substituted unconjugated structure, which is usually unfavorable for radical propagation, both free and controlled radical polymerizations smoothly afford the corresponding polymers. A density-functional-theory-based investigation revealed that the boron atom moderately stabilizes the radical species, which leads to the suppression of the degradative chain transfer to the α-methyl groups, and thus guides the reaction towards the radical polymerization. The boronyl pendants, which are directly attached to the polymer backbone, can be replaced with -OH or -NH2 to yield poly(α-methyl vinyl amine) or poly(α-methyl vinyl alcohol), which has been inaccessible by conventional synthetic methods.

Control of the Alternating Sequence for N-Isopropylacrylamide (NIPAM) and Methacrylic Acid Units in a Copolymer by Cyclopolymerization and Transformation of the Cyclopendant Group.

An alternating copolymer of methacrylic acid and N-isopropyl acrylamide (NIPAM) was synthesized by selective cyclopolymerization of a special divinyl monomer and transformation of repeating cyclo-units in the resultant cyclopolymer. Crucial to the breakthrough is the monomer design in view of two types of cleavable bonds (3° ester and activated ester) in the pendant group of the monomer and the lower reactivity ratio of the two double bonds (methacrylate and electron-poor acrylate) for the polymerizable groups. The thus-obtained cyclopolymer was transformed into the alternating copolymer by transformation of the activated ester into amide by isopropyl amine and cleavage of the 3° ester by trifluoroacetic acid. The resultant copolymer showed thermal and pH response in aqueous solution that was different from the 1:1 random copolymer as well as the homopolymers.

Sequence Analysis for Alternating Copolymers by MALDI-TOF-MS: Importance of Initiator Selectivity for Comonomer Pair.

A special initiator for metal-catalyzed living radical polymerization facilitates sequence analyses by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS) of alternating copolymers from styrene and maleimide derivatives. The initiator is a malonate-based alkyl halide (DEMM-Br), in which two ester groups are attached on the carbon neighboring to bromide, and poor electron density of the radical species allows determination of next unit to the initiator in resultant alternating copolymers due to the selective initiation to styrene derivative. Thanks to the well-defined α-end group, sequence of the oligomeric products via radical copolymerization of PMS and EMI with DEMM-Br can be more simply analyzed by MALDI-TOF-MS, and indeed the following are clarified: the crossover propagation is almost perfectly controlled regardless of the injection ratio; a minor error event of the disordered alternating sequence containing St-St sequential unit could take place; the minor error can be suppressed with an excess amount of maleimide.

Alternating Sequence Control for Carboxylic Acid and Hydroxy Pendant Groups by Controlled Radical Cyclopolymerization of a Divinyl Monomer Carrying a Cleavable Spacer.

By utilizing features of the hemiacetal ester (HAE) bond: easy formation from vinyl ether and carboxylic acid and easy cleavage into different functional groups (-COOH and -OH), we achieved control of the alternating sequence of two functional pendant groups of a vinyl copolymer. Methacrylate- and acrylate-based vinyl groups were connected through HAE bonds to prepare a cleavable divinyl monomer, which was cyclo-polymerized under optimized conditions in a ruthenium-catalyzed living radical polymerization. Subsequent cleavage of the HAE bonds in the resultant cyclo-pendant led to a copolymer consisting of alternating methacrylic acid and 2-hydroxyethyl acrylate units as analyzed by 13 C NMR spectroscopy. The alternating sequence of -COOH and -OH pendants specifically provided a lower critical solution temperature (LCST) in an ether solvent, which was not observed with the random copolymer of same composition ratio.

Functionalization at the central position of vinyl polymer chains: highly associable multipoint hydrogen bonds for complementary self-assemblies.

This paper deals with the precision introduction of a multiple hydrogen-bonding site of a high association constant at the central position of a vinyl polymer chain for complementary self-assemblies. The interactive site consists of an array of hydrogen donors (D) and acceptors (A) to induce a multiple and highly associable interaction with a complementary counterpart. A bifunctional initiator (Cl-DADDAD-Cl) for metal-catalyzed living radical polymerization is thus designed and synthesized to embed a "Hamilton receptor" (DADDAD) between two terminal chlorides (Cl). In the presence of a ruthenium complex, the dichloride gives controlled polymers (Cl∼∼∼DADDAD∼∼∼Cl, ∼ ∼ ∼: polymer backbone) of narrow molecular weight distributions (Mw/Mn < 1.2) from common monomers such as styrene and methyl methacrylate (MMA). The receptor-decorated polystyrene recognizes complementary associable molecules and polymers carrying an ADADA unit (ADADA-Anthracene and ADADA-PMMA) to form self-assemblies where the association constant is as high as K(ass) ≈ 8000 m(-1).

Design of sec-Benzyl Vinyl Ethers toward the Synthesis of Alternating Copolymers Composed of Vinyl Alcohol and Vinyl Ether Units.

In this work, we designed benzyl vinyl ethers carrying alkyl substituents at the benzyl position (i.e., sec-BnVEs) as bulky, reactive, and transformable monomers to realize the alternating cationic copolymerization with an alkyl vinyl ether (VE). In particular, the isopropyl substitution caused not only the bulkiness to suppress the successive propagation but also an enhancement of the vinyl group reactivity to promote crossover propagation with a less bulky VE comonomer. The isopropyl-substituted BnVE (iPr-BnVE) underwent living cationic alternating copolymerization with n-butyl VE (nBVE), and the alternating propagation was strongly suggested by the reactivity ratios. The subsequent deprotection of the sec-benzyl pendant afforded the vinyl alcohol (VA)-nBVE alternating copolymer, and the corresponding statistical copolymer was also synthesized by using the nonsubstituted monomer (BnVE) instead of iPr-BnVE. The alternating copolymer exhibited a higher glass transition temperature, which likely stems from the uniform and efficient hydrogen-bonding formation due to the periodic sequence.

Alternating Graft Copolymer Carrying PLA Graft Chains at Every Other Unit: Sequence Impacts on Crystallization Behaviors.

Alternating graft copolymers were precisely synthesized via selective cyclopolymerization of pendant-transformable divinyl monomer (1), post-polymerization modification via aminolysis with alkylamine, and ring-opening polymerization of l-lactide (LLA) from the hydroxy pendant group in alternating sequence. The poly(LLA) (PLLA) graft chain on the alternating copolymer gave a higher crystallization degree on the isothermal treatment than that on the random counterpart likely because of the periodic sequence. The comonomer pendant group from alkylamine in the aminolysis reaction in the alternating sequence affected the crystallization behaviors, and the oligoethylene glycol (OEG) group promoted the crystallization thanks to the larger free volume effect. As for the stereocomplex formation of the racemic mixture of enantiomeric PLLA and poly(d-lactide) (PDLA) chains, the alternating graft copolymer gave a higher degree of stereocomplex crystallization in the mixture with the enantiomer homopolymer than the random analogue.

Universal Access to Water-Compatible and Nanostructured Materials via the Self-Assembly of Cationic Alternating Copolymers.

Herein, we report the water-assisted self-assembly of alternating copolymers bearing imidazolium cations and hydrophobic groups to create water-compatible and nanostructured materials. The copolymers efficiently absorbed water into the cationic segments from the outer environments, depending on the relative humidity. The absorbed water serves as hydrophilic molecules to modulate the weight fraction of hydrophilic/hydrophobic units in the samples. Thus, the morphologies and domain spacing of the nanostructures can be controlled by not only the side chains, but also the amount of absorbed water. The self-assembly of the cationic copolymers, developed herein, afforded universal access to various morphologies, including lamella, gyroid, and cylinder, in addition to the precision control of the domain spacing at the 0.01 nm level.

Efficient and robust star polymer catalysts for living radical polymerization: cooperative activation in microgel-core reactors.

Multifunctional microgel-core star polymers with ruthenium catalysts are designed as catalyst-bearing nanoreactors to improve activity, controllability, and functionality tolerance in living radical polymerization. Multifunctional ligands are efficiently incorporated into the core of star polymers by sequential tandem procedures: 1) ruthenium-catalyzed living radical polymerization, 2) in situ core hydrogenation, and 3) core-ruthenium removal. Typically, the star polymer ligands comprising multiple phosphines and amines within the core cooperatively enclose a ruthenium complex (>100 per core). As a result, the in-core pseudo hetero P,N-chelation of the ruthenium complexes not only showed high activity for methyl methacrylate but also high tolerance to unprotected methacrylic acid.

Orthogonal C-B Bond Transformation as an Approach for Versatile Synthesis of End-Functionalized Polymers.

Conventionally inaccessible end-functionalized vinyl polymers were synthesized via orthogonal side-chain replacement for terminal and repeating units of poly(alkenyl boronate)s. A terminal-defined polymer of isopropenyl boronic acid pinacol ester (IPBpin) was synthesized via RAFT polymerization, and subsequent cobalt (Co)-catalyzed end olefination afforded the polymer carrying the C(sp2)-B bond at the terminal and the C(sp3)-B bond in repeating units. Herein, the terminal C(sp2)-B bond was selectively transformable via palladium (Pd)-catalyzed Suzuki-Miyaura cross coupling, and subsequent transformation of the repeating C(sp3)-B unit gave the poly(α-methyl vinyl alcohol) [poly(MVA)] bearing various functional groups at the terminal. The boron-based stepwise polymer reaction thus overcame the synthetic difficulty of the end-functionalized poly(MVA), which is ascribed to the poor polymerization ability of the corresponding acetate monomer, i.e., isopropenyl acetate.

Incorporation of a boryl pendant as the trigger in a methacrylate polymer for backbone degradation.

Alkenylboronate units were incorporated into poly(methyl methacrylate) as trigger sites for backbone degradation. The complexation of a fluoride anion to the boron pendant and subsequent activation by a manganese salt triggered the degradation through the generation of a main-chain carbon radical and ß-scission in an adjacent methacrylate unit. The addition of catechol was required, and presumably the chelate coordination to the Mn center was crucial for the degradation.