Mercury in the Polish part of the Baltic Sea: A response to decreased atmospheric deposition and changing environment.

Our review of the literature showed that since the beginning of the socio-economic transformation in Poland in the 1990s, the downward trend in Hg emissions and its deposition in the southern Baltic Sea was followed by a simultaneous decrease in Hg levels in water and marine plants and animals. Hg concentrations in the biota lowered to values that pose no or low risk to wildlife and seafood consumers. However, in the first decade of the current century, a divergence between these two trends became apparent and Hg concentrations in fish, herring and cod, began to rise. Therefore, increasing emission-independent anthropogenic pressures, which affect Hg uptake and trophodynamics, remobilization of land-based and marine legacy Hg deposits, as well as the structure of the food web, can undermine the chances of reducing both the Hg pool in the marine environment and human Hg exposure from fish.

Status and trends of mercury pollution of the atmosphere and terrestrial ecosystems in Poland.

The goal of this paper is to assess the current status and trends of total mercury (THg) contamination of the atmosphere and terrestrial ecosystems in Poland. The study shows that the reduced domestic and worldwide atmospheric emission of Hg resulted in decreased THg level in the terrestrial biotope and biosphere. Considering that Poland is one of the main Hg emitters in Europe, the THg concentrations in its abiotic environment are still elevated. However, the THg level in terrestrial organisms is relatively low, which is because a large proportion of Hg deposited on land is accumulated in organic-rich soils. Regarding the THg concentration, consumption of wildlife and livestock from Poland is safe for humans. Nevertheless, the authors indicate the need for effective environmental monitoring, based on selected bioindicators, which is crucial considering the slowing reduction of Hg emission combined with the consequences of the changing climate.

An assessment of costs and benefits associated with mercury emission reductions from major anthropogenic sources.

Several measures are available for reducing mercury emissions; however, these measures differ with regard to emission control efficiency, cost, and environmental benefits obtained through their implementation. Measures that include the application of technology, such as technology to remove mercury from flue gases in electric power plants, waste incinerators, and smelters, are rather expensive compared with nontechnological measures. In general, dedicated mercury removal is considerably more expensive than a co-benefit strategy, using air pollution control equipment originally designed to limit emissions of criterion pollutants, such as particulate matter, sulfur dioxide, or oxides of nitrogen. Substantial benefits can be achieved globally by introducing mercury emission reduction measures because they reduce human and wildlife exposure to methyl mercury. Although the reduction potential is greatest with the technological measures, technological and nontechnological solutions for mercury emissions and exposure reductions can be carried out in parallel.

Human exposure to mercury in the vicinity of chlor-alkali plant.

The main objectives of our study were to estimate the impact of a mercury cell chlor-alkali (MCCA) complex in Rosignano Solvay (Tuscany, Italy) on the local environment and to assess mercury exposure of inhabitants living near the plant. Measurement campaigns of atmospheric Hg near the MCCA plant showed that the impact of the emitted Hg from the industry on the terrestrial environment is restricted to a close surrounding area. Total gaseous mercury concentrations in ambient air of inhabited area around the MCCA plant were in the range of 8.0-8.7 ng/m3 in summer and 2.8-4.2 ng/m3 in winter. Peaks of up to 100 ng/m3 were observed at particular meteorological conditions. Background levels of 2 ng/m3 were reached within a radius of 3 km from the plant. Reactive gaseous mercury emissions from the plant constituted around 4.2% of total gaseous mercury and total particulate mercury emission constituted around 1.0% of total gaseous mercury emitted. Analysis of local vegetables and soil samples showed relatively low concentrations of total mercury (30.1-2919 microgHg/kg DW in the soil; <0.05-111 microgHg/kg DW in vegetables) and methylmercury (0.02-3.88 microgHg/kg DW in the soil; 0.03-1.18 microgHg/kg DW in vegetables). Locally caught marine fish and fresh marine fish from the local market had concentrations of total Hg from 0.049 to 2.48 microgHg/g FW, of which 37-100% were in the form of methylmercury. 19% of analysed fish exceeded 1.0 microgHg/g FW level, which is a limit set by the European Union law on Hg concentrations in edible marine species for tuna, swordfish and shark, while 39% of analysed fish exceeded the limit of 0.5 microgHg/g FW set for all other edible marine species. Risk assessment performed by calculating ratio of probable daily intake (PDI) and provisional tolerable daily intake (PTDI) for mercury species for various exposure pathways showed no risks to human health for elemental and inorganic mercury, except for some individuals with higher number of amalgam fillings, while PDI/PTDI ratio for methylmercury and total mercury exceeded the toxicologically tolerable value due to the potential consumption of contaminated marine fish.

Towards a global historical emission inventory for selected PCB congeners--a mass balance approach 3. An update.

Previously published estimates of the global production, consumption and atmospheric emissions of 22 individual PCB congeners [Breivik K, Sweetman A, Pacyna JM, Jones KC. Towards a global historical emission inventory for selected PCB congeners - a mass balance approach. 1. Global production and consumption. Sci Total Environ 2002a; 290: 181-198.; Breivik K, Sweetman A, Pacyna JM, Jones KC. Towards a global historical emission inventory for selected PCB congeners--a mass balance approach. 2. Emissions. Sci Total Environ 2002b; 290: 181-198.] have provided useful information for later studies attempting to interpret contaminant levels in remote areas as well as in the global environment. As a result of the need for more contemporary emission data (following the year 2000), an update of this emission database is presented. This exercise takes into account new information on PCB production in Poland, as well as new data on the chemical composition of various technical mixtures for which less information had been available. The methodology to estimate temporal trends of PCB emissions associated with various types of PCB usage is improved. Projected emissions up to year 2100 are presented to facilitate predictions of future environmental exposure. The national emission data for each of the 114 countries considered is spatially resolved on a 1 degrees x1 degrees grid for each congener and year, using population density as a surrogate.

Intercomparison study of atmospheric mercury models: 2. Modelling results vs. long-term observations and comparison of country deposition budgets.

Five regional scale models with a horizontal domain covering the European continent and its surrounding seas, two hemispheric and one global scale model participated in the atmospheric Hg modelling intercomparison study. The models were compared between each other and with available measurements from 11 monitoring stations of the EMEP measurement network. Because only a very limited number of long-term measurement records of Hg were available, significant attention was given to the intercomparison of modelling results. Monthly and annually averaged values of Hg concentrations and depositions as well as items of the Hg deposition budgets for individual European countries were compared. The models demonstrated good agreement (within +/-20%) between annual modelled and observed values of gaseous elemental Hg. Modelled values of Hg wet deposition in Western and Central Europe agreed with the observations within +/-45%. The probability to predict wet depositions within a factor of 2 with regard to measurements was 50-70% for all the models. The scattering of modelling results for dry depositions of Hg was more significant (up to +/-50% at the annual scale and even higher for monthly data). Contribution of dry deposition to the total Hg deposition was estimated at 20-30% with elevated dry deposition fluxes during summer time. The participating models agree in their predictions of transboundary pollution for individual countries within +/-60% at the monthly scale and within +/-30% at the annual scale. For the cases investigated, all the models predict that the major part of national anthropogenic Hg emissions is transported outside the country territory.

Socioeconomic consequences of mercury use and pollution.

In the past, human activities often resulted in mercury releases to the biosphere with little consideration of undesirable consequences for the health of humans and wildlife. This paper outlines the pathways through which humans and wildlife are exposed to mercury. Fish consumption is the major route of exposure to methylmercury. Humans can also receive toxic doses of mercury through inhalation of elevated concentrations of gaseous elemental mercury. We propose that any effective strategy for reducing mercury exposures requires an examination of the complete life cycle of mercury. This paper examines the life cycle of mercury from a global perspective and then identifies several approaches to measuring the benefits of reducing mercury exposure, policy options for reducing Hg emissions, possible exposure reduction mechanisms, and issues associated with mercury risk assessment and communication for different populations.

Global Sources and Pathways of Mercury in the Context of Human Health.

This paper reviews information from the existing literature and the EU GMOS (Global Mercury Observation System) project to assess the current scientific knowledge on global mercury releases into the atmosphere, on global atmospheric transport and deposition, and on the linkage between environmental contamination and potential impacts on human health. The review concludes that assessment of global sources and pathways of mercury in the context of human health is important for being able to monitor the effects from implementation of the Minamata Convention targets, although new research is needed on the improvement of emission inventory data, the chemical and physical behaviour of mercury in the atmosphere, the improvement of monitoring network data, predictions of future emissions and speciation, and on the subsequent effects on the environment, human health, as well as the economic costs and benefits of reducing these aspects.

Mercury emissions to the atmosphere from anthropogenic sources in Europe in 2000 and their scenarios until 2020.

The paper reviews the current state of knowledge regarding European emissions of mercury and presents estimates of European emissions of mercury to the atmosphere from anthropogenic sources for the year 2000. This information was then used as a basis for Hg emission scenario development until the year 2020. Combustion of coal in power plants and residential heat furnaces generates about half of the European emissions being 239 tonnes. The coal combustion is followed by the production of caustic soda with the use of the Hg cell process (17%). Major points of mercury emission generation in the mercury cell process include: by-product hydrogen stream, end box ventilation air, and cell room ventilation air. This technology is now being changed to other caustic soda production technologies and further reduction of Hg emissions is expected in this connection. The third category on the list of the largest Hg emitters in Europe is cement production (about 13%). The largest emissions were estimated for Russia (the European part of the country), contributing with about 27% to the European emissions, followed by Poland, Germany, Spain, Ukraine, France, Italy and the United Kingdom. Most of these countries use coal as a major source of energy in order to meet the electricity and heat demands. In general, countries in the Central and Eastern Europe generated the main part of the European emissions in 2000. Emission reductions between 20% and 80% of the 2000 emission amounts can be obtained by the year 2020, as estimated by various scenarios.

Climate change impacts on environmental and human exposure to mercury in the arctic.

This paper reviews information from the literature and the EU ArcRisk project to assess whether climate change results in an increase or decrease in exposure to mercury (Hg) in the Arctic, and if this in turn will impact the risks related to its harmful effects. It presents the state-of-the art of knowledge on atmospheric mercury emissions from anthropogenic sources worldwide, the long-range transport to the Arctic, and it discusses the likely environmental fate and exposure effects on population groups in the Arctic under climate change conditions. The paper also includes information about the likely synergy effects (co-benefits) current and new climate change polices and mitigation options might have on mercury emissions reductions in the future. The review concludes that reductions of mercury emission from anthropogenic sources worldwide would need to be introduced as soon as possible in order to assure lowering the adverse impact of climate change on human health. Scientific information currently available, however, is not in the position to clearly answer whether climate change will increase or decrease the risk of exposure to mercury in the Arctic. New research should therefore be undertaken to model the relationships between climate change and mercury exposure.

Physical, chemical, and biological changes in the Gulf of Gdansk ecosystem (southern Baltic sea).

This review presents the present state of knowledge of the physical, chemical, and biological changes in waters of the Gulf of Gdansk (Baltic Sea). The general characteristics of the Baltic Sea and the Gulf of Gdansk with brief description of changes in the ecosystem are included. Among meteorological parameters describing climate in the coastal zone, water temperature changes together with considerations of precipitation and sea level are presented. It has been confirmed that the sea level rise over the past 40 yr was very distinct. Throughout the past 30 yr an evident increase in eutrophication has been observed. Therefore, changes in salinity, oxygen content, and nutrient fluctuations with special attention paid to variability in silicate, nitrate, and phosphate concentrations in the water layer are presented. Also, discussion on the presence of toxic pollutants, such as heavy metals, PCBs, PAHs, and some pesticides, in the water body of the Gulf of Gdansk has been included. Because of their ability to bioaccumulate and biomagnify in living organisms, these substances are of crucial importance for future marine life in the Gulf of Gdansk. Finally, biological conditions of the coastal waters of the Gulf of Gdansk were discussed. Data show that the ecosystem structure of the Gulf of Gdansk has undergone tremendous changes. The species pattern has changed significantly--many species have disappeared and others have become dominant.

Towards a global historical emission inventory for selected PCB congeners--a mass balance approach. 1. Global production and consumption.

Information on the historical global production and consumption of polychlorinated biphenyls (PCBs) is urgently needed for estimating PCB fluxes to the environment and for interpreting global contamination patterns by these pollutants. This study presents the methodology, principal uncertainties and selected results from an inventory, aiming to quantify the global production and consumption of total PCBs as well as 22 PCB congeners. The available data on the historical production of PCBs and the chemical composition of various technical mixtures have been compiled from the literature. For some producers with less detailed information, the production of individual PCB constituents has been estimated to derive a global estimate for individual homologues and selected congeners. Information on imports, exports and consumption, as well as restrictions on production and imports, has further been compiled for individual countries. These data, along with assumptions on the trade between countries and regions, have been utilised to derive an estimate of the global historical consumption pattern. Although there are substantial uncertainties involved in these estimates, important aspects governing the large scale temporal and spatial patterns are most likely captured in these estimates. In particular, the information on imports and exports for the principal users of PCBs around the time of peak production is considered to be fairly reliable. The estimates account for a reported historical global production of approximately 1.3 million t PCBs, more than 70% of which are tri-, tetra- and pentachlorinated biphenyls. The results further suggest that almost 97% of the global historical use of PCBs have occurred in the Northern Hemisphere.

Towards a global historical emission inventory for selected PCB congeners--a mass balance approach. 2. Emissions.

Accurate and complete data on the global atmospheric releases (emissions) of individual PCB congeners are essential to study source-receptor relationships and contamination patterns in remote areas, such as the Arctic. Information on the anthropogenic emissions may also be useful for the interpretation of measured levels and patterns of atmospheric PCBs. This study builds upon an accompanying paper, presenting an estimate of the global historical production and consumption of 22 PCB congeners (Breivik K, Sweetman A, Pacyna JM, Jones KC. Towards a global historical emission inventory for selected PCB congeners--a mass balance approach. 1. Global production and consumption. Sci Total Environ, submitted). Here, a dynamic mass balance model is elaborated, parameterised and applied in an attempt to estimate the historical anthropogenic emissions as a direct result of the widespread usage of PCBs for a period of 70 years. This paper presents details of the mass balance approach, along with a discussion of the major uncertainties. It is shown that the diversity of historical usage, disposal and accidental release pathways makes it an extremely difficult task to bridge the gap between consumption and emissions, resulting in an equally complex and diverse true emission pattern. These results may therefore at best represent order-of-magnitude estimates only and the results in absolute terms should be treated with great caution. In spite of these uncertainties, useful information can still be gained. The results suggest that temperature is an extremely important factor controlling both emission amount as well as the emission pattern of PCBs. In particular, the emissions of the more chlorinated (and persistent) PCB congeners appear to be significantly influenced by (uncontrolled) high-temperature sources. As a consequence, it may prove warranted to undertake further measures to avoid that contaminated materials are subject to elevated temperatures and uncontrolled burning. It is furthermore suggested that efforts should be directed towards a better characterisation and quantification of these potentially important release pathways. In addition, alternative approaches to bridge the gap between consumption and emissions in quantitative terms should be considered in order to improve these estimates.

Four decades of gasoline lead emissions and control policies in Europe: a retrospective assessment.

Over decades, large amounts of the neurotoxin lead were released into the European environment, mostly from gasoline lead additives. Emissions were growing unabatedly until the 1970s, when a series of regulations on the allowed gasoline lead content were adopted. As a result, in the 1990s most gasoline contained only small amounts of lead. We have examined this case of environmental pollution and regulation, and performed a retrospective assessment of the extent of regional-scale lead pollution and the effects of gasoline lead regulations in Europe. With the help of a regional climate model, NCEP re-analyses, spatially disaggregated lead emissions from road traffic and point sources, and various local data, the airborne pathways and depositions of gasoline lead in Europe since 1958 were reconstructed. It turns out that this approach is successful in describing the time-variable, spatially disaggregated deposition of gasoline lead. Additional data from analyses of concentrations in biota, including plant leaves, mussels and human blood, allows an assessment about the impact of the lead phase-out on the quality of the environment. Demonstrating the success of the lead policies, concentrations in leaves and human blood have steadily declined since the early 1980s. At the same time, the economic repercussions that had been feared did not emerge. Instead, the affected mineral oil and car manufacturing industries in Germany (our case-study) were able to deal with the effort without incurring significant extra costs. We suggest that our method of quantitatively reconstructing and anticipating fluxes and depositions of substances can be applied to other relevant substances as well, such as, for example, Persistent Organic Pollutants, radioactive substances or pollens.

Primary sources of selected POPs: regional and global scale emission inventories.

During the last decade, a number of studies have been devoted to the sources and emissions of Persistent Organic Pollutants (POPs) at regional and global scales. While significant improvements in knowledge have been achieved for some pesticides, the quantitative understanding of the emission processes and emission patterns for "non-pesticide" POPs are still considered limited. The key issues remaining for the non-pesticide POPs are in part determined by their general source classification. For industrial chemicals, such as the polychlorinated biphenyls (PCBs), there is considerable uncertainty with respect to the relative importance of atmospheric emissions from various source categories. For PCBs, temperature is discussed as a potential key factor influencing atmospheric emission levels and patterns. When it comes to the unintentional by-products of combustion and industrial processes (PCDD/Fs), there is still a large uncertainty with respect to the relative contribution of emissions from unregulated sources such as backyard barrel burning that requires further consideration and characterisation. For hexachlorobenzene (HCB), the relative importance of primary and secondary atmospheric emissions in controlling current atmospheric concentrations remains one of the key uncertainties. While these and other issues may remain unresolved, knowledge concerning the emissions of POPs is a prerequisite for any attempt to understand and predict the distribution and fate of these chemicals on a regional and global scale as well as to efficiently minimise future environmental burdens.