Immunoaffinity column cleanup with liquid chromatography for determination of aflatoxin B1 in corn samples: interlaboratory study.

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 levels in corn samples, enforced by European Union legislation. A test portion was extracted with methanol-water (80 + 20); the extract was filtered, diluted with phosphate-buffered saline solution, filtered on a microfiber glass filter, and applied to an immunoaffinity column. The column was washed with deionized water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase LC with fluorescence detection after either pre- or postcolumn derivatization. Precolumn derivatization was achieved by generating the trifluoroacetic acid derivative, used by 8 laboratories. The postcolumn derivatization was achieved either with pyridinium hydrobromide perbromide, used by 16 laboratories, or with an electrochemical cell by the addition of bromide to the mobile phase, used by 5 laboratories. The derivatization techniques used were not significantly different when compared by the Student's t-test; the method was statistically evaluated for all the laboratories. Five corn sample materials, both spiked and naturally contaminated, were sent to 29 laboratories (22 Italian and 7 European). Test portions were spiked with aflatoxin B1 at levels of 2.00 and 5.00 ng/g. The mean values for recovery were 82% for the low level and 84% for the high contamination level. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the values for relative standard deviation for repeatability (RSDr) ranged from 9.9 to 28.7%. The values for relative standard deviation for reproducibility (RSDR) ranged from 18.6 to 36.8%. The method demonstrated acceptable within- and between-laboratory precision for this matrix, as evidenced by the HorRat values.

Effect of industrial processing on the distribution of aflatoxins and zearalenone in corn-milling fractions.

The aim of this study was to investigate the distribution of aflatoxins and zearalenone levels in various corn-milling fractions. Corn kernels and six derived milling fractions (germ, bran, large and small grits, flour, and animal feed flour) were sampled in an industrial plant; both conventional and organic corns were sampled. To evaluate the effect of cooking, samples of polenta were prepared starting from naturally contaminated flour. Conventional and organic lots showed mycotoxin contamination. For both lots, germ, bran, and animal feed flour showed a marked concentration factor from 239 to 911% accounting for both the low yields of the derived products and the distribution of aflatoxins and zearalenone contamination in the outer parts of the kernels. Conversely, a reduction factor of at least four times from raw material to finished products was observed. Polenta samples were unaffected by the cooking process, with levels of contamination similar to those of starting flour.

Effect of sample size in the evaluation of "in-field" sampling plans for aflatoxin B(1) determination in corn.

Use of proper sampling methods throughout the agri-food chain is crucial when it comes to effectively detecting contaminants in foods and feeds. The objective of the study was to estimate the performance of sampling plan designs to determine aflatoxin B(1) (AFB(1)) contamination in corn fields. A total of 840 ears were selected from a corn field suspected of being contaminated with aflatoxin. The mean and variance among the aflatoxin values for each ear were 10.6 mug/kg and 2233.3, respectively. The variability and confidence intervals associated with sample means of a given size could be predicted using an equation associated with the normal distribution. Sample sizes of 248 and 674 ears would be required to estimate the true field concentration of 10.6 mug/kg within +/-50 and +/-30%, respectively. Using the distribution information from the study, operating characteristic curves were developed to show the performance of various sampling plan designs.

Ochratoxin a contamination in italian wine samples and evaluation of the exposure in the italian population.

The scope of this study was to evaluate the exposure of the Italian population to ochratoxin A (OTA) attributable to wine consumption. With this aim 1166 wine samples (773 red wines, 290 white, 75 rose, and 28 dessert wines), collected in 19 different Italian regions and mostly produced between 1988 and 2004, were analyzed for OTA content. The obtained results are reported by year of harvest, geographical area of production, and type of wine. Red wine showed the highest maximum level of contamination (7.50 ng/mL), even though rose wines were characterized by a higher mean value (0.01 ng/mL). A gradually increasing mean concentration was also observed from the north (0.05 ng/mL) to south of Italy (0.54 ng/mL). Exposure calculations, performed using two different consumption databases, indicate a daily intake for consumer only of 0.59 up to 1.24 ng/(kg of b.w.)/day and of 0.33 up to 0.90 ng/(kg of b.w.)/day for the total population. Even in the worst case, corresponding to the calculation of the intake for consumers only in southern Italy and Islands and considering the mean consumption data increased by 1 standard deviation, a quite low exposure (1.68 ng/(kg of b.w.)/day, accounting for 9.8% of TDI) was obtained. Considering the overall OTA dietary exposure, obtained exposure rates indicate that wine did not pose a risk to the Italian population health.