RESUMO
The development of high-performance ultraelastic metals with superb strength, a large elastic strain limit and temperature-insensitive elastic modulus (Elinvar effect) are important for various industrial applications, from actuators and medical devices to high-precision instruments1,2. The elastic strain limit of bulk crystalline metals is usually less than 1 per cent, owing to dislocation easy gliding. Shape memory alloys3-including gum metals4,5 and strain glass alloys6,7-may attain an elastic strain limit up to several per cent, although this is the result of pseudo-elasticity and is accompanied by large energy dissipation3. Recently, chemically complex alloys, such as 'high-entropy' alloys8, have attracted tremendous research interest owing to their promising properties9-15. In this work we report on a chemically complex alloy with a large atomic size misfit usually unaffordable in conventional alloys. The alloy exhibits a high elastic strain limit (approximately 2 per cent) and a very low internal friction (less than 2 × 10-4) at room temperature. More interestingly, this alloy exhibits an extraordinary Elinvar effect, maintaining near-constant elastic modulus between room temperature and 627 degrees Celsius (900 kelvin), which is, to our knowledge, unmatched by the existing alloys hitherto reported.
RESUMO
This study investigates the evolution of superconductivity in K2-xFe4+ySe5 using temperature-dependent X-ray absorption and resonant inelastic X-ray scattering techniques. Magnetization measurements show that polycrystalline superconducting (SC) K1.9Fe4.2Se5 has a critical temperature (T c) of â¼31 K with a varying superconducting volume fraction, which strongly depends on its synthesis temperature. An increase in Fe-structural/vacancy disorder in SC samples with more Fe atoms occupying vacant 4d sites is found to be closely related to the decrease in the spin magnetic moment of Fe. Moreover, the nearest-neighbor Fe-Se bond length in SC samples exceeds that in the non-SC (NS) sample, K2Fe4Se5, which indicates a weaker hybridization between the Fe 3d and Se 4p states in SC samples. These results clearly demonstrate the correlations among the local electronic and atomic structures and the magnetic properties of K2-xFe4+ySe5 superconductors, providing deeper insight into the electron pairing mechanisms of superconductivity.
RESUMO
Intermetallic alloys have traditionally been characterized by their inherent brittleness due to their lack of sufficient slip systems and absence of strain hardening. However, here we developed a single-phase B2 high-entropy intermetallic alloy that is both strong and plastic. Unlike conventional intermetallics, this high-entropy alloy features a highly distorted crystalline lattice with complex chemical order, leading to multiple slip systems and high flow stress. In addition, the alloy exhibits a dynamic hardening mechanism triggered by dislocation gliding that preserves its strength across a wide range of temperatures. As a result, this high-entropy intermetallic circumvents precipitous thermal softening, with extensive plastic flows even at high homologous temperatures, outperforming a variety of both body-centered cubic and B2 alloys. These findings reveal a promising direction for the development of intermetallic alloys with broad engineering applications.
RESUMO
Temperature-dependent X-ray absorption near-edge structures, X-ray linear dichroism (XLD) and extended X-ray absorption fine structure (EXAFS) spectroscopic techniques were used to investigate the valence state, preferred orbital and local atomic structure that significantly affect the electrical and magnetic properties of a single crystal of YBaCuFeO5 (YBCFO). An onset of increase of resistivity at ~180 K, followed by a rapid increase at/below 125 K, is observed. An antiferromagnetic (AFM)-like transition is close to the temperature at which the resistivity starts to increase in the ab-plane and is also observed with strong anisotropy between the ab-plane and the c-axis. The XLD spectra at the Fe L3,2-edge revealed a change in Fe 3d eg holes from the preferential [Formula: see text] orbital at high temperature (300-150 K) to the [Formula: see text] orbital at/below 125 K. The analysis of the Fe K-edge EXAFS data of YBCFO further revealed an unusual increase in the Debye-Waller factor of the nearest-neighbor Fe-O bond length at/below 125 K, suggesting phonon-softening behavior, resulting in the breaking of lattice symmetry, particularly in the ab-plane of Fe-related square pyramids. These findings demonstrate a close correlation between electrical resistivity and coupling of the preferred Fe 3d orbital with lattice distortion of a single crystal of YBCFO.
RESUMO
Fe and Y K-edge extended x-ray absorption fine structure, Fe(Y) L(3,2)-edge (L(3)-edge) x-ray absorption near-edge structure (XANES) and valence-band photoemission spectroscopy (VB-PES) measurements have been carried out to study soft magnetic ternary Fe(78-x)Y(x)B(22) bulk metallic glasses (BMGs). The combined XANES and VB-PES results do not show broadening of the Fe 3d band to support the previous interpretation of the reduction of the magnetic moment in BMGs by Y-induced decrease of exchange splitting of Fe 3d orbitals. Instead, the density of delocalized/itinerant Fe 3d states in the vicinity of the Fermi level is found to be reduced by Y substitution, which reduces the strength of itinerant-states-mediated ferromagnetic coupling between local spins on the Fe ions and the total magnetic moment of the Fe-based BMGs.
RESUMO
This investigation reports on anisotropy in the magnetic interaction, lattice-orbital coupling and degree of phonon softening in single crystal Ni3TeO6 (NTO) using temperature- and polarization-dependent X-ray absorption spectroscopic techniques. The magnetic field-cooled and zero-field-cooled measurements and temperature-dependent Ni L3,2-edge X-ray magnetic circular dichroism spectra of NTO reveal a weak Ni-Ni ferromagnetic interaction close to ~60 K (TSO: temperature of the onset of spin ordering) with a net alignment of Ni spins (the uncompensated components of the Ni moments) along the crystallographic c-axis, which is absent from the ab-plane. Below the Néel temperature, TN~ 52 K, NTO is stable in the antiferromagnetic state with its spin axis parallel to the c-axis. The Ni L3,2-edge X-ray linear dichroism results indicate that above TSO, the Ni 3d eg electrons preferentially occupy the out-of-plane 3d3z2-r2 orbitals and switch to the in-plane 3dx2-y2 orbitals below TSO. The inherent distortion of the NiO6 octahedra and anisotropic nearest-neighbor Ni-O bond lengths between the c-axis and the ab-plane of NTO, followed by anomalous Debye-Waller factors and orbital-lattice in conjunction with spin-phonon couplings, stabilize the occupied out-of-plane (3d3z2-r2) and in-plane (3dx2-y2) Ni eg orbitals above and below TSO, respectively.
RESUMO
Various synchrotron radiation-based spectroscopic and microscopic techniques are used to elucidate the room-temperature ferromagnetism of carbon-doped ZnO-nanowires (ZnO-C:NW) via a mild C+ ion implantation method. The photoluminescence and magnetic hysteresis loops reveal that the implantation of C reduces the number of intrinsic surface defects and increases the saturated magnetization of ZnO-NW. The interstitial implanted C ions constitute the majority of defects in ZnO-C:NW as confirmed by the X-ray absorption spectroscopic studies. The X-ray magnetic circular dichroism spectra of O and C K-edge respectively indicate there is a reduction in the number of unpaired/dangling O 2p bonds in the surface region of ZnO-C:NW and the C 2p-derived states of the implanted C ions strongly affect the net spin polarization in the surface and bulk regions of ZnO-C:NW. Furthermore, these findings corroborate well with the first-principles calculations of C-implanted ZnO in surface and bulk regions, which highlight the stability of implanted C for the suppression and enhancement of the ferromagnetism of the ZnO-C:NW in the surface region and bulk phase, respectively.
RESUMO
X-ray absorption near-edge structure (XANES) and valence-band photoemission spectroscopy (VB-PES) were used to elucidate the electronic and mechanical properties of diamond-like carbon (DLC) thin films deposited by the plasma-enhanced chemical vapour deposition method at various bias voltages (V(b)) using a C(2)H(2) vapour precursor in an Ar(+) atmosphere. The increase of V(b) is found to increase and decrease the contents of sp(3)- and sp(2)-bonded carbon atoms, respectively, i.e. the films become more diamond-like. The Young's modulus measurements show increases with the increase of the presence of sp(3)-bonded carbon atoms in the structure of the DLC films.
RESUMO
X-ray scattering (XRS), x-ray absorption near-edge structure (XANES) and extended x-ray absorption fine structure (EXAFS) spectroscopic techniques were used to study the electronic and atomic structures of the high-quality Sr3Ir4Sn13 (SIS) single crystal below and above the transition temperature (T* ≈ 147 K). The evolution of a series of modulated satellite peaks below the transition temperature in the XRS experiment indicated the formation of a possible charge density wave (CDW) in the (110) plane. The EXAFS phase derivative analysis supports the CDW-like formation by revealing different bond distances [Sn1(2)-Sn2] below and above T* in the (110) plane. XANES spectra at the Ir L3-edge and Sn K-edge demonstrated an increase (decrease) in the unoccupied (occupied) density of Ir 5d-derived states and a nearly constant density of Sn 5p-derived states at temperatures T < T* in the (110) plane. These observations clearly suggest that the Ir 5d-derived states are closely related to the anomalous resistivity transition. Accordingly, a close relationship exists between local electronic and atomic structures and the CDW-like phase in the SIS single crystal.
RESUMO
The local electronic and atomic structures of the high-quality single crystal of SrFeO3-δ (δ~0.19) were studied using temperature-dependent x-ray absorption and valence-band photoemission spectroscopy (VB-PES) to investigate the origin of anisotropic resistivity in the ab-plane and along the c-axis close to the region of thermal hysteresis (near temperature for susceptibility maximum, Tm~78 K). All experiments herein were conducted during warming and cooling processes. The Fe L 3,2-edge X-ray linear dichroism results show that during cooling from room temperature to below the transition temperature, the unoccupied Fe 3d e g states remain in persistently out-of-plane 3d 3z2-r2 orbitals. In contrast, in the warming process below the transition temperature, they change from 3d 3z2-r2 to in-plane 3d x2-y2 orbitals. The nearest-neighbor (NN) Fe-O bond lengths also exhibit anisotropic behavior in the ab-plane and along the c-axis below Tm. The anisotropic NN Fe-O bond lengths and Debye-Waller factors stabilize the in-plane Fe 3d x2-y2 and out-of-plane 3d 3z2-r2 orbitals during warming and cooling, respectively. Additionally, a VB-PES study further confirms that a relative band gap opens at low temperature in both the ab-plane and along the c-axis, providing the clear evidence of the charge-density-wave nature of SrFeO3-δ (δ~0.19) single crystal.
RESUMO
We report the experimental observation and theoretical explanation of an unconventional interplay between divalent Co and trivalent Y dopants, both of which incur oxygen vacancies in the CeO2 host that has predominantly tetravalent Ce cations. The Co dopant atoms were experimentally found to act as a switch that turns on the dormant effect of Y-modulated band-gap reduction. As revealed by density functional theory (DFT) calculations with structures verified by synchrotron-radiation x-ray measurements, a Co 3d band that hybridizes with Ce 4f band was lowered due to reduced O 2p repulsion arising from oxygen vacancies incurred by Y doping and therefore gave rise to the observed band-gap narrowing effect. Such switch-and-modulator scheme for band-gap engineering in nanocrystal materials can lead to important applications in environmental protection and solar energy harvesting technologies.