Erratum: Identification of the Mott Insulating Charge Density Wave State in 1T-TaS_{2} [Phys. Rev. Lett. 126, 196406 (2021)].

This corrects the article DOI: 10.1103/PhysRevLett.126.196406.

Unraveling materials Berry curvature and Chern numbers from real-time evolution of Bloch states.

Materials can be classified by the topological character of their electronic structure and, in this perspective, global attributes immune to local deformations have been discussed in terms of Berry curvature and Chern numbers. Except for instructional simple models, linear response theories have been ubiquitously used in calculations of topological properties of real materials. Here we propose a completely different and versatile approach to obtain the topological characteristics of materials by calculating physical observables from the real-time evolving Bloch states: The cell-averaged current density reveals the anomalous velocities that lead to the conductivity quantum. Results for prototypical cases are shown, including a spin-frozen valley Hall and a quantum anomalous Hall insulator. The advantage of this method is best illustrated by the example of a quantum spin Hall insulator: The quantized spin Hall conductivity is straightforwardly obtained irrespective of the non-Abelian nature in its Berry curvature. Moreover, the method can be extended to the description of real observables in nonequilibrium states of topological materials.

Identification of the Mott Insulating Charge Density Wave State in 1T-TaS_{2}.

We investigate the low-temperature charge density wave (CDW) state of bulk TaS_{2} with a fully self-consistent density-functional theory with the Hubbard U potential, over which the controversy has remained unresolved regarding the out-of-plane metallic band. By examining the innate structure of the Hubbard U potential, we reveal that the conventional use of atomic-orbital basis could seriously misevaluate the electron correlation in the CDW state. By adopting a generalized basis, covering the whole David star, we successfully reproduce the Mott insulating nature with the layer-by-layer antiferromagnetic order. Similar consideration should be applied for description of the electron correlation in molecular solid.

Exploitable Magnetic Anisotropy of the Two-Dimensional Magnet CrI3.

Magnetic anisotropy often plays a central role in various static and dynamic properties of magnetic materials. In particular, for two-dimensional (2D) van der Waals materials, as inferred from the Mermin-Wagner theorem, it is an essential prerequisite for stabilizing ferromagnetic order. In this work, we carry out first-principles calculations for a CrI3 monolayer and investigate how its magnetic anisotropy is interrelated to adjustable parameters governing the underlying electronic structure. We explore various routes for controlled manipulation of magnetic anisotropy: chemical adsorption, substitutional doping, optical excitation, and charge transfer through a heterostructure. In particular, the vertical stacking of CrI3 and graphene is noteworthy in regard to controlling magnetic anisotropy: the spin anisotropy axis is switchable between the out-of-plane and in-plane directions, which is accompanied by a variation in the anisotropy energy of up to 500%. Our results show the possibility that dynamic control of the anisotropy of the 2D magnet CrI3 may enable the development of an advanced spintronic device with enhanced energy efficiency and high operation speed.

Facile Ferroelectric Phase Transition Driven by Si Doping in HfO2.

The recently discovered ferroelectricity in thin-film orthorhombic HfO2, which can be directly integrated into complementary metal-oxide semiconductor technology, has become an important research target. However, the use of orthorhombic HfO2 in practical devices has been limited by undesirable mixing with the monoclinic phase, which is nonpolar and thus degrades the ferroelectric properties. Here, we demonstrate that a Si dopant significantly stabilizes the ferroelectric phase because of its unique bonding characteristics, particularly its intrinsic tendency to form strong covalent bonds with O, thereby weakening the phase boundary to stabilize the ferroelectric orthorhombic phase over the nonpolar monoclinic phase, relatively. On the basis of our theoretical predictions, we conducted transmission electron microscopy measurements and confirmed that Si substitution doping indeed induced monoclinic structural components into the orthorhombic phase, which is a strong indication of the weakened phase boundary and subsequent facilitation of the ferroelectric transition. This work thus provides an atomic-scale picture for understanding the unique role of Si in promoting the ferroelectric phase and the dopant dependence on the wake-up effect in HfO2, offering a substantial advancement toward integrating ferroelectrics into practical devices.

Spin-Split Band Hybridization in Graphene Proximitized with α-RuCl3 Nanosheets.

Proximity effects induced in the two-dimensional Dirac material graphene potentially open access to novel and intriguing physical phenomena. Thus far, the coupling between graphene and ferromagnetic insulators has been experimentally established. However, only very little is known about graphene's interaction with antiferromagnetic insulators. Here, we report a low-temperature study of the electronic properties of high quality van der Waals heterostructures composed of a single graphene layer proximitized with α-RuCl3. The latter is known to become antiferromagnetically ordered below 10 K. Shubnikov-de Haas oscillations in the longitudinal resistance together with Hall resistance measurements provide clear evidence for a band realignment that is accompanied by a transfer of electrons originally occupying the graphene's spin degenerate Dirac cones into α-RuCl3 band states with in-plane spin polarization. Left behind are holes in two separate Fermi pockets, only the dispersion of one of which is distorted near the Fermi energy due to spin selective hybridization with these spin polarized α-RuCl3 band states. This interpretation is supported by our density functional theory calculations. An unexpected damping of the quantum oscillations as well as a zero-field resistance upturn close to the Néel temperature of α-RuCl3 suggest the onset of additional spin scattering due to spin fluctuations in the α-RuCl3.

Two-dimensional polyaniline (C3N) from carbonized organic single crystals in solid state.

The formation of 2D polyaniline (PANI) has attracted considerable interest due to its expected electronic and optoelectronic properties. Although PANI was discovered over 150 y ago, obtaining an atomically well-defined 2D PANI framework has been a longstanding challenge. Here, we describe the synthesis of 2D PANI via the direct pyrolysis of hexaaminobenzene trihydrochloride single crystals in solid state. The 2D PANI consists of three phenyl rings sharing six nitrogen atoms, and its structural unit has the empirical formula of C3N. The topological and electronic structures of the 2D PANI were revealed by scanning tunneling microscopy and scanning tunneling spectroscopy combined with a first-principle density functional theory calculation. The electronic properties of pristine 2D PANI films (undoped) showed ambipolar behaviors with a Dirac point of -37 V and an average conductivity of 0.72 S/cm. After doping with hydrochloric acid, the conductivity jumped to 1.41 × 10(3) S/cm, which is the highest value for doped PANI reported to date. Although the structure of 2D PANI is analogous to graphene, it contains uniformly distributed nitrogen atoms for multifunctionality; hence, we anticipate that 2D PANI has strong potential, from wet chemistry to device applications, beyond linear PANI and other 2D materials.

Paramagnetic Carbon Nanosheets with Random Hole Defects and Oxygenated Functional Groups.

Ordered graphitic carbon nanosheets (GCNs) were, for the first time, synthesized by the direct condensation of multifunctional phenylacetyl building blocks (monomers) in the presence of phosphorous pentoxide. The GCNs had highly ordered structures with random hole defects and oxygenated functional groups, showing paramagnetism. The results of combined structural and magnetic analyses indicate that the hole defects and functional groups are associated with the appearance and stabilization of unpaired spins. DFT calculations further suggest that the emergence of stabilized spin moments near the edge groups necessitates the presence of functionalized carbon atoms around the hole defects. That is, both hole defects and oxygenated functional groups are essential ingredients for the generation and stabilization of spins in GCNs.

Wafer-Scale and Wrinkle-Free Epitaxial Growth of Single-Orientated Multilayer Hexagonal Boron Nitride on Sapphire.

Large-scale growth of high-quality hexagonal boron nitride has been a challenge in two-dimensional-material-based electronics. Herein, we present wafer-scale and wrinkle-free epitaxial growth of multilayer hexagonal boron nitride on a sapphire substrate by using high-temperature and low-pressure chemical vapor deposition. Microscopic and spectroscopic investigations and theoretical calculations reveal that synthesized hexagonal boron nitride has a single rotational orientation with AA' stacking order. A facile method for transferring hexagonal boron nitride onto other target substrates was developed, which provides the opportunity for using hexagonal boron nitride as a substrate in practical electronic circuits. A graphene field effect transistor fabricated on our hexagonal boron nitride sheets shows clear quantum oscillation and highly improved carrier mobility because the ultraflatness of the hexagonal boron nitride surface can reduce the substrate-induced degradation of the carrier mobility of two-dimensional materials.

Rectifying the Optical-Field-Induced Current in Dielectrics: Petahertz Diode.

Investigating a theoretical model of the optical-field-induced current in dielectrics driven by strong few-cycle laser pulses, we propose an asymmetric conducting of the current by forming a heterojunction made of two distinct dielectrics with a low hole mass (m_{h}^{*}≪m_{e}^{*}) and low electron mass (m_{e}^{*}≪m_{h}^{*}), respectively. This proposition introduces the novel concept of a petahertz (10^{15} Hz) diode to rectify the current in the petahertz domain, which should be a key ingredient for the electric signal manipulation of future light-wave electronics. Further, we suggest the candidate dielectrics for the heterojunction.

Hollow Silicon Nanostructures via the Kirkendall Effect.

The Kirkendall effect is a simple, novel phenomenon that may be applied for the synthesis of hollow nanostructures with designed pore structures and chemical composition. We demonstrate the use of the Kirkendall effect for silicon (Si) and germanium (Ge) nanowires (NWs) and nanoparticles (NPs) via introduction of nanoscale surface layers of SiO2 and GeO2, respectively. Depending on the reaction time, Si and Ge atoms gradually diffuse outward through the oxide layers, with pore formation in the nanostructural cores. Through the Kirkendall effect, NWs and NPs were transformed into nanotubes (NTs) and hollow NPs, respectively. The mechanism of the Kirkendall effect was studied via quantum molecular dynamics calculations. The hollow products demonstrated better electrochemical performance than their solid counterparts because the pores developed in the nanostructures resulted in lower external pressures during lithiation.

Unusually Stable Triazine-based Organic Superstructures.

Solid-state reactions have been rapidly gaining popularity in organic chemistry owing to their simplicity, efficiency, and selectivity compared to liquid-phase reactions. Herein, we describe the formation of superstructures through the solid-state reaction of an organic single-crystal. The superstructure of 5,5',5''-(1,3,5-triazine-2,4,6-triyl)triisophthalonitrile (TIPN) can be formed by cyclotrimerization of 1,3,5-tricyanobenzene (TCB) single crystals. The TIPN superstructure was confirmed by single crystal X-ray diffraction and visualized by transmission electron microscopy. The superstructure has hexagonally packed 1-dimensional (1D) channels along the crystal axis. Furthermore, the superstructure arises from interdigitated nitrile interactions in the crystal lattice, and thus has electron-beam tolerance and very high thermal stability.

Progress on first-principles-based materials design for hydrogen storage.

This article briefly summarizes the research activities in the field of hydrogen storage in sorbent materials and reports our recent works and future directions for the design of such materials. Distinct features of sorption-based hydrogen storage methods are described compared with metal hydrides and complex chemical hydrides. We classify the studies of hydrogen sorbent materials in terms of two key technical issues: (i) constructing stable framework structures with high porosity, and (ii) increasing the binding affinity of hydrogen molecules to surfaces beyond the usual van der Waals interaction. The recent development of reticular chemistry is summarized as a means for addressing the first issue. Theoretical studies focus mainly on the second issue and can be grouped into three classes according to the underlying interaction mechanism: electrostatic interactions based on alkaline cations, Kubas interactions with open transition metals, and orbital interactions involving Ca and other nontransitional metals. Hierarchical computational methods to enable the theoretical predictions are explained, from ab initio studies to molecular dynamics simulations using force field parameters. We also discuss the actual delivery amount of stored hydrogen, which depends on the charging and discharging conditions. The usefulness and practical significance of the hydrogen spillover mechanism in increasing the storage capacity are presented as well.

Metal-free Ketjenblack incorporated nitrogen-doped carbon sheets derived from gelatin as oxygen reduction catalysts.

Electrocatalysts facilitating oxygen reduction reaction (ORR) are vital components in advanced fuel cells and metal-air batteries. Here we report Ketjenblack incorporated nitrogen-doped carbon sheets derived from gelatin and apply these easily scalable materials as metal-free electrocatalysts for ORR. These carbon nanosheets demonstrate highly comparable catalytic activity for ORR as well as better durability than commercial Vulcan carbon supported Pt catalysts in alkaline media. Physico-chemical characterization and theoretical calculations suggest that proper combination of graphitic and pyridinic nitrogen species with more exposed edge sites effectively facilitates a formation of superoxide, [O2(ad)](-), via one-electron transfer, thus increasing catalytic activities for ORR. Our results demonstrate a novel strategy to expose more nitrogen doped edge sites by irregular stacked small sheets in developing better electrocatalysts for Zn-air batteries. These desirable architectures are embodied by an amphiphlilic gelatin mediated compatible synthetic strategy between hydrophobic carbon and aqueous water.

Coordination Chemistry of [Co(acac)2 ] with N-Doped Graphene: Implications for Oxygen Reduction Reaction Reactivity of Organometallic Co-O4 -N Species.

Hybridization of organometallic complexes with graphene-based materials can give rise to enhanced catalytic performance. Understanding the chemical structures within hybrid materials is of primary importance. In this work, archetypical hybrid materials are synthesized by the reaction of an organometallic complex, [Co(II) (acac)2 ] (acac=acetylacetonate), with N-doped graphene-based materials at room temperature. Experimental characterization of the hybrid materials and theoretical calculations reveal that the organometallic cobalt-containing species is coordinated to heterocyclic groups in N-doped graphene as well as to its parental acac ligands. The hybrid material shows high electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media, and superior durability and methanol tolerance to a Pt/C catalyst. Based on the chemical structures and ORR experiments, the catalytically active species is identified as a Co-O4 -N structure.

Development of double-perovskite compounds as cathode materials for low-temperature solid oxide fuel cells.

A class of double-perovskite compounds display fast oxygen ion diffusion and high catalytic activity toward oxygen reduction while maintaining excellent compatibility with the electrolyte. The astoundingly extended stability of NdBa(1-x)Ca(x)Co2O(5+δ) (NBCaCO) under both air and CO2-containing atmosphere is reported along with excellent electrochemical performance by only Ca doping into the A site of NdBaCo2O(5+δ) (NBCO). The enhanced stability can be ascribed to both the increased electron affinity of mobile oxygen species with Ca, determined through density functional theory calculations and the increased redox stability from the coulometric titration.

Direct solvothermal synthesis of B/N-doped graphene.

Heteroatom-doping into graphitic networks has been utilized for opening the band gap of graphene. However, boron-doping into the graphitic framework is extremely limited, whereas nitrogen-doping is relatively feasible. Herein, boron/nitrogen co-doped graphene (BCN-graphene) is directly synthesized from the reaction of CCl4 , BBr3 , and N2 in the presence of potassium. The resultant BCN-graphene has boron and nitrogen contents of 2.38 and 2.66 atom %, respectively, and displays good dispersion stability in N-methyl-2-pyrrolidone, allowing for solution casting fabrication of a field-effect transistor. The device displays an on/off ratio of 10.7 with an optical band gap of 3.3 eV. Considering the scalability of the production method and the benefits of solution processability, BCN-graphene has high potential for many practical applications.

Suppressed terahertz dynamics of water confined in nanometer gaps.

Nanoconfined waters exhibit low static permittivity mainly due to interfacial effects that span about one nanometer. The characteristic length scale may be much longer in the terahertz (THz) regime where long-range collective dynamics occur; however, the THz dynamics have been largely unexplored because of the lack of a robust platform. Here, we use metallic loop nanogaps to sharply enhance light-matter interactions and precisely measure real and imaginary THz refractive indices of nanoconfined water at gap widths ranging from 2 to 20 nanometers, spanning mostly interfacial waters all the way to quasi-bulk waters. We find that, in addition to the well-known interfacial effect, the confinement effect also contributes substantially to the decrease in the complex refractive indices of the nanoconfined water by cutting off low-energy vibrational modes, even at gap widths as large as 10 nanometers. Our findings provide valuable insights into the collective dynamics of water molecules which is crucial to understanding water-mediated processes.

Direct Electroplating Ruthenium Precursor on the Surface Oxidized Nickel Foam for Efficient and Stable Bifunctional Alkaline Water Electrolysis.

Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of Ru─O─Ni bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm-2 (OER: 410 mV; HER: 240 mV), surpassing commercial RuO2 (OER: 600 mV) and Pt/C based performance (HER: 265 mV).