RESUMO
In this work, medium pressure plasma treatment of polylactic acid (PLA) is investigated. PLA is a biocompatible aliphatic polymer, which can be used for bone fixation devices and tissue engineering scaffolds. Due to inadequate surface properties, cell adhesion and proliferation are far less than optimal and a surface modification is required for most biomedical applications. By using a dielectric barrier discharge (DBD) operating at medium pressure in different atmospheres, the surface properties of a PLA foil are modified. After plasma treatment, water contact angle measurements showed an increased hydrophilic character of the foil surface. X-ray photoelectron spectroscopy (XPS) revealed an increased oxygen content. Cell culture tests showed that plasma modification of PLA films increased the initial cell attachment both quantitatively and qualitatively. After 1 day, cells on plasma-treated PLA showed a superior cell morphology in comparison with unmodified PLA samples. However, after 7 days of culture, no significant differences were observed between untreated and plasma-modified PLA samples. While plasma treatment improves the initial cell attachment, it does not seem to influence cell proliferation. It has also been observed that the difference between the 3 discharge gases is negligible when looking at the improved cell-material interactions. From economical point of view, plasma treatments in air are thus the best choice.
Assuntos
Fibroblastos/fisiologia , Ácido Láctico/química , Gases em Plasma , Polímeros/química , Adesão Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Humanos , Interações Hidrofóbicas e Hidrofílicas , Ácido Láctico/síntese química , Ácido Láctico/farmacologia , Teste de Materiais , Modelos Biológicos , Espectroscopia Fotoeletrônica , Poliésteres , Polímeros/síntese química , Polímeros/farmacologia , Propriedades de Superfície/efeitos dos fármacos , Engenharia Tecidual/instrumentação , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
We report for the first time the use of an amorphous oxide catalyst for the selective oxidation of methanol in the gas phase, leading at 553 K to the production of dimethoxymethane with a selectivity as high as 90% at high methanol conversion (68%).
RESUMO
In this article, a medium-pressure DBD plasma treatment is used to improve the cell-material interaction of a polyhydroxybutyrate/polyhydroxyvalerate (PHB/PHV) film. PHB/PHV is a biodegradable natural polyester, used for different biomedical applications, including sutures, repair devices, and bone marrow scaffolds. The cell adhesion onto PHB/PHV is far less than optimal due to inadequate surface properties, and a surface modification is usually necessary to be able to use the full potential. Medium-pressure plasma treatments, in different atmospheres, are used to change the surface properties of a PHB/PHV foil. The hydrophilic character could be increased, as shown by water contact angle measurements. X-ray photoelectron spectroscopy (XPS) revealed an increased oxygen and nitrogen content. Cell culture test with human foreskin fibroblasts showed that the plasma was able to improve cell adhesion (both quantitatively and qualitatively). Both an increase in the number of adherent cells and an improved morphology were obtained after plasma treatment. After 7 days, a confluent cell layer could be observed on plasma-treated samples. The differences between the three discharge gases are negligible when looking at the improved cell-material interactions. From economical point of view, treatments in air are thus the best choice.
Assuntos
Materiais Biocompatíveis/farmacologia , Comunicação Celular/efeitos dos fármacos , Fibroblastos/citologia , Gases em Plasma/farmacologia , Poliésteres/farmacologia , Pressão , Células Cultivadas , Eletricidade , Fibroblastos/efeitos dos fármacos , Humanos , Masculino , Microscopia de Fluorescência , Espectroscopia Fotoeletrônica , Proibitinas , TermodinâmicaRESUMO
Homodispersed 1.8 nm gold nanoparticles were obtained reproducibly in high yields using the classical Turkevich protocol at a high concentration in a continuous flow capillary reactor. The microfluidic reactor made from commercially available items permitted short mixing, heating and quenching times which are the key parameters of this synthesis.
Assuntos
Ácido Cítrico/química , Ouro/química , Nanopartículas Metálicas/química , Técnicas Analíticas Microfluídicas , Concentração de Íons de Hidrogênio , Luz , Nanopartículas Metálicas/ultraestrutura , Oxirredução , Espalhamento de Radiação , Temperatura , Fatores de TempoRESUMO
The paper reports on the preparation of superhydrophobic amorphous silicon oxide nanowires (a-SiONWs) on silicon substrates with a contact angle greater than 150 degrees by means of surface roughness and self-assembly. Nanowires with an average mean diameter in the range 20-150 nm and 15-20 microm in length were obtained by the so-called solid-liquid-solid (SLS) technique. The porous nature and the high roughness of the resulting surfaces were confirmed by AFM imaging. The superhydrophobicity resulted from the combined effects of surface roughness and chemical modification with fluorodecyl trichlorosilane.
Assuntos
Nanofios/química , Nanofios/ultraestrutura , Óxidos/química , Silício/química , Interações Hidrofóbicas e Hidrofílicas , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , EspectrofotometriaRESUMO
Grafting of [W(2)(NMe(2))(6)] onto dehydroxylated silica affords the well-defined surface species [([triple bond, length as m-dash]Si-O)W(2)(NMe(2))(5)], characterized by elemental analysis, and infrared, Raman and NMR spectroscopies, and the catalytic reactivity of this supported tungsten(III) d(3)-d(3) dimer and of its alkoxide derivatives towards alkynes has been probed.
RESUMO
This paper reports on the formation and characterization of semicarbazide termination on aminated boron-doped diamond (BDD) surfaces, and further preparation of peptide microarray through site-specific alpha-oxo semicarbazone ligation. Hydrogen-terminated BDD electrodes were first aminated using NH3 plasma treatment and then reacted with triphosgene and Fmoc-protected hydrazine to yield a protected semicarbazide termination. Subsequent deprotection and chemical reaction with glyoxylyl peptides led to the covalent immobilization of the peptides on the surface through site-specific ligation. The resulting surfaces were characterized using X-ray photoelectron spectroscopy (XPS) and fluorescence measurements.
Assuntos
Aminas/química , Boro/química , Diamante , Peptídeos/química , Físico-Química/métodos , Eletrodos , Hidrogênio/química , Modelos Químicos , Análise Serial de Proteínas , Semicarbazidas/química , Espectrometria de Fluorescência , Espectrometria por Raios X , Propriedades de Superfície , TemperaturaRESUMO
Single crystals of the potassium salt K3(H2O)4[H2SiVW11O40](H2O)8+x of the vanadium monosubstituted alpha-Keggin dodecatunsgstosilicate were grown from an aqueous solution and analyzed by EDS, XRD, vibration and electronic spectroscopy, and 1H, 51V, and 29Si solid-state NMR spectroscopy. Results indicate the formation of a nanoporous-like compound of hexagonal symmetry (space group P62) with large, water-filled channels running along the c axis. A uniform distribution of vanadium over the 12 metal sites of the alpha-Keggin anion is observed by XRD. Two different neighborhoods were characterized by 51V NMR in a 2:1 ratio (deltaiso=-546.3 and -536.2 ppm), in accordance with a difference in the number of potassium ions in the second coordination shell of vanadium.
RESUMO
Molybdenum and cobalt based heteropolyanions (HPAs) could be used as an alternative to the conventional ammonium heptamolybdate and cobalt nitrate starting materials for friendly environmental preparation of Co-Mo/Al2O3 hydrotreating catalysts. In this aim, cobalt salts of molybdocobaltate and molydboaluminate Anderson HPAs have been synthesized and characterized by TGA, XRD, XAS, and vibrational spectroscopies. The crystal structure refinement provided evidence for the formation of a new heteropolyoxomolybdate derived from the well-known Anderson structure.
RESUMO
Hydrogen adsorption on Mo[bond]S, Co[bond]Mo[bond]S, and Ni[bond]Mo[bond]S (10 1 macro 0) surfaces has been modeled by means of periodic DFT calculations taking into account the gaseous surrounding of these catalysts in working conditions. On the stable Mo[bond]S surface, only six-fold coordinated Mo cations are present, whereas substitution by Co or Ni leads to the creation of stable coordinatively unsaturated sites. On the stable MoS(2) surface, hydrogen dissociation is always endothermic and presents a high activation barrier. On Co[bond]Mo[bond]S surfaces, the ability to dissociate H(2) depends on the nature of the metal atom and the sulfur coordination environment. As an adsorption center, Co strongly favors molecular hydrogen activation as compared to the Mo atoms. Co also increases the ability of its sulfur atom ligands to bind hydrogen. Investigation of surface acidity using ammonia as a probe molecule confirms the crucial role of sulfur basicity on hydrogen activation on these surfaces. As a result, Co[bond]Mo[bond]S surfaces present Co[bond]S sites for which the dissociation of hydrogen is exothermic and weakly activated. On Ni[bond]Mo[bond]S surfaces, Ni[bond]S pairs are not stable and do not provide for an efficient way for hydrogen activation. These theoretical results are in good agreement with recent experimental studies of H(2)[bond]D(2) exchange reactions.