Fast Catalysis at Low Overpotential: Designing Efficient Dicationic Re(bpy2+)(CO)3I Electrocatalysts for CO2 Reduction.

We report a series of isomeric, dicationic Re(bpy2+)(CO)3I complexes with bpy (2,2'-bipyridine) modified by two phenyl-CH2-(NMe3)+ pendants with cations located at variable distances from the active site for electrocatalytic CO2 reduction in CH3CN/2.8 M H2O. The position of the cationic groups dramatically increases the rate of catalysis by ∼800-fold, from 1.2 to 950 s-1, with only a minor increase in overpotential. Acceleration is due to stabilization of the initial CO2 adduct and lowering of ΔG‡ for C-OH bond cleavage by Coulombic stabilization of anionic charges. Performance may be enhanced by accumulation in the electrochemical double layer. Transition state stabilization in the optimized isomer unlocks the low overpotential "protonation-first" pathway, highlighting the sizable effects of subtle structural optimization.

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands.

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO)5Cl to form complexes of the type Re(bpy)(CO)3Cl, which are related to known catalysts for CO2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. A conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

Bridge Sites of Au Surfaces Are Active for Electrocatalytic CO2 Reduction.

Prior in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) studies of electrochemical CO2 reduction catalyzed by Au, one of the most selective and active electrocatalysts to produce CO from CO2, suggest that the reaction proceeds solely on the top sites of the Au surface. This finding is worth updating with an improved spectroelectrochemical system where in situ IR measurements can be performed under real reaction conditions that yield high CO selectivity. Herein, we report the preparation of an Au-coated Si ATR crystal electrode with both high catalytic activity for CO2 reduction and strong surface enhancement of IR signals validated in the same spectroelectrochemical cell, which allows us to probe the adsorption and desorption behavior of bridge-bonded *CO species (*COB). We find that the Au surface restructures irreversibly to give an increased number of bridge sites for CO adsorption within the initial tens of seconds of CO2 reduction. By studying the potential-dependent desorption kinetics of *COB and quantifying the steady-state surface concentration of *COB under reaction conditions, we further show that *COB are active reaction intermediates for CO2 reduction to CO on this Au electrode. At medium overpotential, as high as 38% of the reaction occurs on the bridge sites.

Multicomponent Pyrazole Synthesis from Alkynes, Nitriles, and Titanium Imido Complexes via Oxidatively Induced N-N Bond Coupling.

Pyrazoles are an important class of heterocycles found in a wide range of bioactive compounds and pharmaceuticals. Pyrazole synthesis often requires hydrazine or related reagents where an intact N-N bond is conservatively installed into a pyrazole precursor fragment. Herein, we report the multicomponent oxidative coupling of alkynes, nitriles, and Ti imido complexes for the synthesis of multisubstituted pyrazoles. This modular method avoids potentially hazardous reagents like hydrazine, instead forming the N-N bond in the final step via oxidation-induced coupling on Ti. The mechanism of this transformation has been studied in-depth through stoichiometric reactions of the key diazatitanacyclohexadiene intermediate, which can be accessed via multicomponent coupling of Ti imidos with nitriles and alkynes, ring opening of 2-imino-2H-azirines, or direct metalation of 4-azadiene-1-amine derivatives. The critical transformation in this reaction is the 2-electron oxidation-induced N-N coupling on Ti. This is a rare example of formal N-N coupling on a metal center, which likely occurs through an electrocyclic mechanism analogous to a Nazarov cyclization. Conveniently, these 2-electron-oxidized diazatitanacyclohexadiene intermediates can be accessed via disproportionation of the 1-electron-oxidized species, which allows utilization of weak oxidants such as TEMPO.

The 4-Electron Cleavage of a N═N Double Bond by a Trimetallic TiNi2 Complex.

The synthesis and reactivity of a new trimetallic complex Ti(NP)4Ni2 (NP = 2-diphenylphosphinopyrrolide) (3) is reported. Single-crystal X-ray diffraction and X-ray absorption studies point to a unique bonding motif: a d10-d10, Ni0-Ni0 bond stabilized by a proximal d0 TiIV metal center. The coordination chemistry of 3 with a variety of L (L = isocyanide and alkyne) donors has also been explored. In the case of isocyanide coordination, the Ni-Ni bond is broken, while diphenylacetylene binding results in a symmetric butterfly µ2-κ2-alkyne bridge across the Ni-Ni moiety. Finally, complex 3 is capable of the 4-electron cleavage of the N═N double bond in benzo[c]cinnoline, the first example of N═N bond cleavage by Ni. The resulting product, 7, has been characterized structurally and spectroscopically, and the mechanistic implications are discussed in the context of metal-metal cooperativity.

Redox Non-Innocent Behavior of a Terminal Iridium Hydrazido(2-) Triple Bond.

The synthesis of the first terminal Group 9 hydrazido(2-) complex, Cp*IrN(TMP) (6) (TMP=2,2,6,6-tetramethylpiperidine) is reported. Electronic structure and X-ray diffraction analysis indicate that this complex contains an Ir-N triple bond, similar to Bergman's seminal Cp*Ir(Nt Bu) imido complex. However, in sharp contrast to Bergman's imido, 6 displays remarkable redox non-innocent reactivity owing to the presence of the Nß lone pair. Treatment of 6 with MeI results in electron transfer from Nß to Ir prior to oxidative addition of MeI to the iridium center. This behavior opens the possibility of carrying out facile oxidative reactions at a formally IrIII metal center through a hydrazido(2-)/isodiazene valence tautomerization.

α-Diimine synthesis via titanium-mediated multicomponent diimination of alkynes with C-nitrosos.

α-Diimines are commonly used as supporting ligands for a variety of transition metal-catalyzed processes, most notably in α-olefin polymerization. They are also precursors to valuable synthetic targets, such as chiral 1,2-diamines. Their synthesis is usually performed through acid-catalyzed condensation of amines with α-diketones. Despite the simplicity of this approach, accessing unsymmetrical α-diimines is challenging. Herein, we report the Ti-mediated intermolecular diimination of alkynes to afford a variety of symmetrical and unsymmetrical α-diimines through the reaction of diazatitanacyclohexadiene intermediates with C-nitrosos. These diazatitanacycles can be readily accessed in situ via the multicomponent coupling of Ti[triple bond, length as m-dash]NR imidos with alkynes and nitriles. The formation of α-diimines is achieved through formal [4 + 2]-cycloaddition of the C-nitroso to the Ti and γ-carbon of the diazatitanacyclohexadiene followed by two subsequent cycloreversion steps to eliminate nitrile and afford the α-diimine and a Ti oxo.

Generation of Masked TiII Intermediates from TiIV Amides via ß-H Abstraction or Alkyne Deprotonation: An Example of Ti-Catalyzed Nitrene-Coupled Transfer Hydrogenation.

Simple Ti amide complexes are shown to act as sources for masked TiII intermediates via several pathways, as demonstrated through the investigation of a unique Ti-catalyzed nitrene-coupled transfer hydrogenation of 3-hexyne. This reaction proceeds through reduction of azobenzene by a masked TiII catalyst, wherein both amines and 3-hexyne can serve as the hydrogen source/reductant for Ti by forming putative titanaziridines via ß-H abstraction or putative titanacyclopentynes via protonolysis, respectively.

Modern applications of low-valent early transition metals in synthesis and catalysis.

Low-valent early transition metals are often intrinsically highly reactive as a result of their strong propensity toward oxidation to more stable high-valent states. Harnessing these highly reducing complexes for productive reactivity is potentially powerful for C-C bond construction, organic reductions, small-molecule activation and many other reactions that offer orthogonal chemoselectivity and/or regioselectivity patterns to processes promoted by late transition metals. Recent years have seen many exciting new applications of low-valent metals through building new catalytic and/or multicomponent reaction manifolds out of classical reactivity patterns. In this Review, we survey new methods that employ early transition metals and invoke low-valent precursors or intermediates in order to identify common themes and strategies in synthesis and catalysis.

Oxidative nitrene transfer from azides to alkynes via Ti(ii)/Ti(iv) redox catalysis: formal [2+2+1] synthesis of pyrroles.

Catalytic oxidative nitrene transfer from azides with the early transition metals is rare, and has not been observed without the support of redox noninnocent spectator ligands. Here, we report the formal [2+2+1] coupling of azides and alkynes via TiII/TiIV redox catalysis from simple Ti halide imido precatalysts. These reactions yield polysubstituted N-alkyl pyrroles, including N-benzyl protected pyrroles and rare examples of very electron rich pentaalkyl pyrroles. Mechanistic analysis reveals that [2+2+1] reactions with bulky azides have different mechanistic features from previously-reported reactions using azobenzene as a nitrene source.

Generation of TiII Alkyne Trimerization Catalysts in the Absence of Strong Metal Reductants.

Low-valent TiII species have typically been synthesized by the reaction of TiIV halides with strong metal reductants. Herein we report that TiII species can be generated simply by reacting TiIV imido complexes with 2 equiv of alkyne, yielding a metallacycle that can reductively eliminate pyrrole while liberating TiII. In order to probe the generality of this process, TiII-catalyzed alkyne trimerization reactions were carried out with a diverse range of TiIV precatalysts.