Laser-induced fluorescence thermometry of supercritical CO2 flows inside a micro-channel.

This work demonstrates a thermometric technique using laser-induced fluorescence (LIF) in supercritical carbon dioxide flows in a micro-channel. Rhodamine 6G was used as a temperature-sensitive fluorescent dye. The flow conditions were at a pressure of 7.9 MPa and temperature in the range of 23°-90°C. 2D spatial distributions and time-resolved temperature profiles were obtained at this high pressure. Measured LIF signals showed close relations to the temperatures obtained from resistance temperature detectors.

Superhydrophobic graphene foams.

The static and dynamic wetting properties of a 3D graphene foam network are reported. The foam is synthesized using template-directed chemical vapor deposition and contains pores several hundred micrometers in dimension while the walls of the foam comprise few-layer graphene sheets that are coated with Teflon. Water contact angle measurements reveal that the foam is superhydrophobic with an advancing contact angle of ∼163 degrees while the receding contact angle is ∼143 degrees. The extremely water repellent nature of the foam is also confirmed when impacting water droplets are able to completely rebound from the surface. Such superhydrophobic graphene foams show potential in a variety of applications ranging from anti-sticking and self-cleaning to anti-corrosion and low-friction coatings.

Advancing micro-scale cooling by utilizing liquid-liquid phase separation.

Achieving effective cooling within limited space is one of the key challenges for miniaturized product design. State-of-the-art micro-scale cooling enhancement techniques incorporate flow disturbances and boiling to reach high performance. However, these methods face the inherent issues of extra pressure drop, flow instability and dry-out that limits heat flux. Here we demonstrate that substantial cooling capability enhancement, up to 2.5 times, is realized by introducing the phase separation of a triethylamine (TEA)/water mixture at the micro-scale. Our experiments show that the enhancement behavior is closely related to the system's initial composition, temperature, and flow conditions. Moreover, the mixture system exhibits reduced pressure drop after separation, which makes it more promising in serving practical applications. The results reveal new possibilities for liquid coolant selection and provide the experimental foundation for further research in this area.

Graphene drape minimizes the pinning and hysteresis of water drops on nanotextured rough surfaces.

Previous studies of the interaction of water with graphene-coated surfaces have been limited to flat (smooth) surfaces. Here we created a rough surface by nanopatterning and then draped the surface with a single-layer graphene sheet. We found that the ultrasheer graphene drape prevents the penetration of water into the textured surface thereby drastically reducing the contact angle hysteresis (which is a measure of frictional energy dissipation) and preventing the liquid contact line from getting pinned to the substrate. This has important technological implications since the main obstacle to the motion of liquid drops on rough surfaces is contact angle hysteresis and contact line pinning. Graphene drapes could therefore enable enhanced droplet mobility which is required in a wide range of applications in micro and nanofluidics. Compared to polymer coatings that could fill the cavities between the nano/micropores or significantly alter the roughness profile of the substrate, graphene provides the thinnest (i.e., most sheer) and most conformal drape that is imaginable. Despite its extreme thinness, the graphene drape is mechanically robust, chemically stable, and offers high flexibility and resilience which can enable it to reliably drape arbitrarily complex surface topologies. Graphene drapes may therefore provide a hitherto unavailable ability to tailor the dynamic wettability of surfaces for a variety of applications.