Enhanced light out-coupling of organic light-emitting diode using metallic nanomesh electrodes and microlens array.

A precisely controlled metallic nanomesh was fabricated by using nanosphere lithography to pattern the silver thin film to form hexagonal nanohole arrays with excellent uniformity, high conductivity and good transparency. An Alq(3) based OLED, with the silver nanomesh electrode of high ðll factor of 70.2% demonstrated a considerable luminous efðciency of 4.8 cd/A, which is 60.9% higher than the referenced device with ITO anode. The periodical nanohole array not only increased the transparency but also helped extracting surface plasmonic wave in organic layers. By attaching the microlens array to further extract the trapped light in substrate, the extraction efficiency enhancement of device with nanomesh anode was 73.8% higher than 50.2% of the referenced device with ITO anode. And the overall current efficiency of device with nanomesh anode was 87.7% higher than traditional ITO based device.

Light guide of Au nanostructures for color-filterness optoelectronic display devices.

Au line nanostructures with different pitch distances from 500 nm to 950 nm on ITO coated glass substrates have been fabricated at room temperature for exploring the color light guide in all kinds of display system. The patterned Au line array is used as a light outcoupling and color-selection component due to the emission wavelength changed by the Au line arrays with different pitch distances that could achieve multi-color selections. The ITO coated glass substrates patterned with periodic Au line arrays with controlled line pitches has been demonstrated and used as a color filter in all display devices. Using a proper pitch distance of Au line nanostructures, the basic third colors of red, green, and blue (RGB) can be simply gained and controlled without a traditional color filter for future optoelectronic display devices.

Case report: the clinical toxicity of dimethylamine borane.

CONTEXT: Dimethylamine borane (DMAB) is a reducing agent used in nonelectric plating of semiconductors. Exposures are usually through occupational contact. We report here four cases of people who suffered from work-related exposure to DMAB. CASE PRESENTATION: Three patients exposed to DMAB decontaminated immediately by drinking a lot of water; they reported dizziness, nausea, diarrhea 6-8 hr later. The other patient did not decontaminate at once, and he suffered from more severe symptoms, including dizziness, nausea, limb numbness, slurred speech, irritable mood, and ataxia 13 hr later. Magnetic resonance imaging showed symmetric lesions with hyperintensity on T2WI and FLAIR in bilateral cerebellar dantate nuclei. This patient was readmitted to the hospital due to difficulty in walking and climbing 18 days after exposure. Lower leg weakness and drop foot were found bilaterally. A nerve conduction study revealed polyneuropathy with motor-predominant axonal degeneration. This patient receives regular outpatient followups and still walks with a clumsy gait and has difficulty with hand-grasping activity. DISCUSSION: This case study demonstrates that DMAB is highly toxic to humans through any route of exposure, and dermal absorption is the major route of neurotoxicity. DMAB induces acute cortical and cerebellar injuries and delayed peripheral neuropathy. RELEVANCE: Further investigation of the toxic mechanism of DMAB is warranted. Early decontamination with copious water is the best current treatment for exposure to DMAB.